Created
May 31, 2021 16:42
-
-
Save pdp7/bd61e5f78545de182605992254d3eeee to your computer and use it in GitHub Desktop.
beaglebone 5.13 with NO usb fix
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500) | |
| Trying to boot from MMC1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| U-Boot 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500), Build: jenkins-github_Bootloader-Builder-144 | |
| CPU : AM335X-GP rev 2.1 | |
| I2C: ready | |
| DRAM: 512 MiB | |
| No match for driver 'omap_hsmmc' | |
| No match for driver 'omap_hsmmc' | |
| Some drivers were not found | |
| Reset Source: Global warm SW reset has occurred. | |
| Reset Source: Power-on reset has occurred. | |
| RTC 32KCLK Source: External. | |
| MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 | |
| Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
| ** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
| Board: BeagleBone Black | |
| <ethaddr> not set. Validating first E-fuse MAC | |
| BeagleBone Black: | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x54 | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x55 | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x56 | |
| BeagleBone Cape EEPROM: no EEPROM at address: 0x57 | |
| Net: eth0: MII MODE | |
| cpsw, usb_ether | |
| Press SPACE to abort autoboot in 0 seconds | |
| board_name=[A335BNLT] ... | |
| board_rev=[000C] ... | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| SD/MMC found on device 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| gpio: pin 56 (gpio 56) value is 0 | |
| gpio: pin 55 (gpio 55) value is 0 | |
| gpio: pin 54 (gpio 54) value is 0 | |
| gpio: pin 53 (gpio 53) value is 1 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| gpio: pin 54 (gpio 54) value is 1 | |
| Checking for: /uEnv.txt ... | |
| Checking for: /boot.scr ... | |
| Checking for: /boot/boot.scr ... | |
| Checking for: /boot/uEnv.txt ... | |
| gpio: pin 55 (gpio 55) value is 1 | |
| 1964 bytes read in 38 ms (49.8 KiB/s) | |
| Loaded environment from /boot/uEnv.txt | |
| Checking if uname_r is set in /boot/uEnv.txt... | |
| gpio: pin 56 (gpio 56) value is 1 | |
| Running uname_boot ... | |
| loading /boot/vmlinuz-5.13.0-rc2no-fix-omap2plus-r0 ... | |
| 4030152 bytes read in 298 ms (12.9 MiB/s) | |
| debug: [enable_uboot_overlays=] ... | |
| loading /boot/dtbs/5.13.0-rc2no-fix-omap2plus-r0/am335x-boneblack.dtb ... | |
| 66379 bytes read in 59 ms (1.1 MiB/s) | |
| uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable... | |
| debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ... | |
| debug: [bootz 0x82000000 - 0x88000000] ... | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Device Tree to 8ffec000, end 8ffff34a ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Linux version 5.13.0-rc2no-fix-omap2plus-r0 (pdp7@x1) (arm-linux-gnueabi-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #6 SMP Mon May 31 09:04:40 PDT 2021 | |
| [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black | |
| [ 0.000000] Memory policy: Data cache writeback | |
| [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] | |
| [ 0.000000] HighMem empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] | |
| [ 0.000000] On node 0 totalpages: 130560 | |
| [ 0.000000] Normal zone: 1148 pages used for memmap | |
| [ 0.000000] Normal zone: 0 pages reserved | |
| [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 | |
| [ 0.000000] CPU: All CPU(s) started in SVC mode. | |
| [ 0.000000] AM335X ES2.1 (sgx neon) | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s49932 r8192 d23796 u81920 | |
| [ 0.000000] pcpu-alloc: s49932 r8192 d23796 u81920 alloc=20*4096 | |
| [ 0.000000] pcpu-alloc: [0] 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
| [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet | |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 487088K/522240K available (8192K kernel code, 855K rwdata, 1912K rodata, 1024K init, 229K bss, 18768K reserved, 16384K cma-reserved, 0K highmem) | |
| [ 0.000000] trace event string verifier disabled | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
| [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
| [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x33c/0x574 with crng_init=0 | |
| [ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 | |
| [ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
| [ 0.000027] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.000411] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 | |
| [ 0.001888] Console: colour dummy device 80x30 | |
| [ 0.001940] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
| [ 0.001952] This ensures that you still see kernel messages. Please | |
| [ 0.001962] update your kernel commandline. | |
| [ 0.002003] Calibrating delay loop (skipped) preset value.. 398.13 BogoMIPS (lpj=1990656) | |
| [ 0.002030] pid_max: default: 32768 minimum: 301 | |
| [ 0.002159] LSM: Security Framework initializing | |
| [ 0.002260] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| [ 0.002282] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| [ 0.003322] CPU: Testing write buffer coherency: ok | |
| [ 0.003420] CPU0: Spectre v2: using BPIALL workaround | |
| [ 0.003764] CPU0: thread -1, cpu 0, socket -1, mpidr 0 | |
| [ 0.004577] Setting up static identity map for 0x80100000 - 0x80100078 | |
| [ 0.004789] rcu: Hierarchical SRCU implementation. | |
| [ 0.005844] smp: Bringing up secondary CPUs ... | |
| [ 0.005872] smp: Brought up 1 node, 1 CPU | |
| [ 0.005887] SMP: Total of 1 processors activated (398.13 BogoMIPS). | |
| [ 0.005900] CPU: All CPU(s) started in SVC mode. | |
| [ 0.006619] devtmpfs: initialized | |
| [ 0.019385] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
| [ 0.019699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.019735] futex hash table entries: 256 (order: 2, 16384 bytes, linear) | |
| [ 0.021332] pinctrl core: initialized pinctrl subsystem | |
| [ 0.021929] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT | |
| [ 0.023082] NET: Registered protocol family 16 | |
| [ 0.026659] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
| [ 0.027219] audit: initializing netlink subsys (disabled) | |
| [ 0.028216] thermal_sys: Registered thermal governor 'fair_share' | |
| [ 0.028236] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.028253] thermal_sys: Registered thermal governor 'user_space' | |
| [ 0.028617] cpuidle: using governor menu | |
| [ 0.041808] No ATAGs? | |
| [ 0.041846] hw-breakpoint: debug architecture 0x4 unsupported. | |
| [ 0.047831] Kprobes globally optimized | |
| [ 0.048113] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.052769] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) | |
| [ 0.052815] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup | |
| [ 0.052843] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' | |
| [ 0.052884] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' | |
| [ 0.052907] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup | |
| [ 0.052921] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found | |
| [ 0.054116] iommu: Default domain type: Translated | |
| [ 0.055436] SCSI subsystem initialized | |
| [ 0.055745] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.055760] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.055788] PTP clock support registered | |
| [ 0.057075] clocksource: Switched to clocksource dmtimer | |
| [ 0.089733] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.089858] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.119746] NET: Registered protocol family 2 | |
| [ 0.119992] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.120854] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | |
| [ 0.120908] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
| [ 0.120961] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.121026] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.121147] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | |
| [ 0.121178] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | |
| [ 0.121363] NET: Registered protocol family 1 | |
| [ 0.122737] Initialise system trusted keyrings | |
| [ 0.123621] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
| [ 0.124566] Key type asymmetric registered | |
| [ 0.124600] Asymmetric key parser 'x509' registered | |
| [ 0.124623] io scheduler mq-deadline registered | |
| [ 0.124636] io scheduler kyber registered | |
| [ 0.128077] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled | |
| [ 0.130194] serial8250 serial8250: no of_node; not parsing pinctrl DT | |
| [ 0.141509] brd: module loaded | |
| [ 0.150503] loop: module loaded | |
| [ 0.151275] mtdoops: mtd device (mtddev=name/number) must be supplied | |
| [ 0.152480] mdio_bus fixed-0: GPIO lookup for consumer reset | |
| [ 0.152508] mdio_bus fixed-0: using lookup tables for GPIO lookup | |
| [ 0.152522] mdio_bus fixed-0: No GPIO consumer reset found | |
| [ 0.152569] libphy: Fixed MDIO Bus: probed | |
| [ 0.153575] i2c /dev entries driver | |
| [ 0.154056] ti-cpufreq ti-cpufreq: no of_node; not parsing pinctrl DT | |
| [ 0.154396] cpuidle: enable-method property 'ti,am3352' found operations | |
| [ 0.154786] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.154802] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.154981] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.155195] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.155929] Initializing XFRM netlink socket | |
| [ 0.156114] NET: Registered protocol family 10 | |
| [ 0.157590] Segment Routing with IPv6 | |
| [ 0.157699] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 0.158460] NET: Registered protocol family 17 | |
| [ 0.158515] NET: Registered protocol family 15 | |
| [ 0.158565] Key type dns_resolver registered | |
| [ 0.158643] ThumbEE CPU extension supported. | |
| [ 0.158661] Registering SWP/SWPB emulation handler | |
| [ 0.159105] omap_voltage_late_init: Voltage driver support not added | |
| [ 0.159437] SmartReflex Class3 initialized | |
| [ 0.160119] Loading compiled-in X.509 certificates | |
| [ 0.187795] pinctrl-single 44e10800.pinmux: allocating 142 pins | |
| [ 0.187853] pinctrl-single 44e10800.pinmux: try to register 142 pins ... | |
| [ 0.187875] pinctrl core: registered pin 0 (PIN0) on pinctrl-single | |
| [ 0.187894] pinctrl core: registered pin 1 (PIN1) on pinctrl-single | |
| [ 0.187915] pinctrl core: registered pin 2 (PIN2) on pinctrl-single | |
| [ 0.187928] pinctrl core: registered pin 3 (PIN3) on pinctrl-single | |
| [ 0.187941] pinctrl core: registered pin 4 (PIN4) on pinctrl-single | |
| [ 0.187953] pinctrl core: registered pin 5 (PIN5) on pinctrl-single | |
| [ 0.187965] pinctrl core: registered pin 6 (PIN6) on pinctrl-single | |
| [ 0.187978] pinctrl core: registered pin 7 (PIN7) on pinctrl-single | |
| [ 0.187990] pinctrl core: registered pin 8 (PIN8) on pinctrl-single | |
| [ 0.188002] pinctrl core: registered pin 9 (PIN9) on pinctrl-single | |
| [ 0.188014] pinctrl core: registered pin 10 (PIN10) on pinctrl-single | |
| [ 0.188027] pinctrl core: registered pin 11 (PIN11) on pinctrl-single | |
| [ 0.188039] pinctrl core: registered pin 12 (PIN12) on pinctrl-single | |
| [ 0.188052] pinctrl core: registered pin 13 (PIN13) on pinctrl-single | |
| [ 0.188064] pinctrl core: registered pin 14 (PIN14) on pinctrl-single | |
| [ 0.188076] pinctrl core: registered pin 15 (PIN15) on pinctrl-single | |
| [ 0.188089] pinctrl core: registered pin 16 (PIN16) on pinctrl-single | |
| [ 0.188101] pinctrl core: registered pin 17 (PIN17) on pinctrl-single | |
| [ 0.188114] pinctrl core: registered pin 18 (PIN18) on pinctrl-single | |
| [ 0.188127] pinctrl core: registered pin 19 (PIN19) on pinctrl-single | |
| [ 0.188139] pinctrl core: registered pin 20 (PIN20) on pinctrl-single | |
| [ 0.188152] pinctrl core: registered pin 21 (PIN21) on pinctrl-single | |
| [ 0.188164] pinctrl core: registered pin 22 (PIN22) on pinctrl-single | |
| [ 0.188177] pinctrl core: registered pin 23 (PIN23) on pinctrl-single | |
| [ 0.188189] pinctrl core: registered pin 24 (PIN24) on pinctrl-single | |
| [ 0.188201] pinctrl core: registered pin 25 (PIN25) on pinctrl-single | |
| [ 0.188214] pinctrl core: registered pin 26 (PIN26) on pinctrl-single | |
| [ 0.188226] pinctrl core: registered pin 27 (PIN27) on pinctrl-single | |
| [ 0.188239] pinctrl core: registered pin 28 (PIN28) on pinctrl-single | |
| [ 0.188252] pinctrl core: registered pin 29 (PIN29) on pinctrl-single | |
| [ 0.188264] pinctrl core: registered pin 30 (PIN30) on pinctrl-single | |
| [ 0.188276] pinctrl core: registered pin 31 (PIN31) on pinctrl-single | |
| [ 0.188290] pinctrl core: registered pin 32 (PIN32) on pinctrl-single | |
| [ 0.188302] pinctrl core: registered pin 33 (PIN33) on pinctrl-single | |
| [ 0.188319] pinctrl core: registered pin 34 (PIN34) on pinctrl-single | |
| [ 0.188332] pinctrl core: registered pin 35 (PIN35) on pinctrl-single | |
| [ 0.188344] pinctrl core: registered pin 36 (PIN36) on pinctrl-single | |
| [ 0.188357] pinctrl core: registered pin 37 (PIN37) on pinctrl-single | |
| [ 0.188370] pinctrl core: registered pin 38 (PIN38) on pinctrl-single | |
| [ 0.188383] pinctrl core: registered pin 39 (PIN39) on pinctrl-single | |
| [ 0.188396] pinctrl core: registered pin 40 (PIN40) on pinctrl-single | |
| [ 0.188408] pinctrl core: registered pin 41 (PIN41) on pinctrl-single | |
| [ 0.188421] pinctrl core: registered pin 42 (PIN42) on pinctrl-single | |
| [ 0.188433] pinctrl core: registered pin 43 (PIN43) on pinctrl-single | |
| [ 0.188446] pinctrl core: registered pin 44 (PIN44) on pinctrl-single | |
| [ 0.188458] pinctrl core: registered pin 45 (PIN45) on pinctrl-single | |
| [ 0.188470] pinctrl core: registered pin 46 (PIN46) on pinctrl-single | |
| [ 0.188482] pinctrl core: registered pin 47 (PIN47) on pinctrl-single | |
| [ 0.188495] pinctrl core: registered pin 48 (PIN48) on pinctrl-single | |
| [ 0.188508] pinctrl core: registered pin 49 (PIN49) on pinctrl-single | |
| [ 0.188520] pinctrl core: registered pin 50 (PIN50) on pinctrl-single | |
| [ 0.188533] pinctrl core: registered pin 51 (PIN51) on pinctrl-single | |
| [ 0.188545] pinctrl core: registered pin 52 (PIN52) on pinctrl-single | |
| [ 0.188557] pinctrl core: registered pin 53 (PIN53) on pinctrl-single | |
| [ 0.188570] pinctrl core: registered pin 54 (PIN54) on pinctrl-single | |
| [ 0.188582] pinctrl core: registered pin 55 (PIN55) on pinctrl-single | |
| [ 0.188594] pinctrl core: registered pin 56 (PIN56) on pinctrl-single | |
| [ 0.188607] pinctrl core: registered pin 57 (PIN57) on pinctrl-single | |
| [ 0.188619] pinctrl core: registered pin 58 (PIN58) on pinctrl-single | |
| [ 0.188631] pinctrl core: registered pin 59 (PIN59) on pinctrl-single | |
| [ 0.188644] pinctrl core: registered pin 60 (PIN60) on pinctrl-single | |
| [ 0.188656] pinctrl core: registered pin 61 (PIN61) on pinctrl-single | |
| [ 0.188668] pinctrl core: registered pin 62 (PIN62) on pinctrl-single | |
| [ 0.188680] pinctrl core: registered pin 63 (PIN63) on pinctrl-single | |
| [ 0.188696] pinctrl core: registered pin 64 (PIN64) on pinctrl-single | |
| [ 0.188709] pinctrl core: registered pin 65 (PIN65) on pinctrl-single | |
| [ 0.188725] pinctrl core: registered pin 66 (PIN66) on pinctrl-single | |
| [ 0.188738] pinctrl core: registered pin 67 (PIN67) on pinctrl-single | |
| [ 0.188750] pinctrl core: registered pin 68 (PIN68) on pinctrl-single | |
| [ 0.188764] pinctrl core: registered pin 69 (PIN69) on pinctrl-single | |
| [ 0.188776] pinctrl core: registered pin 70 (PIN70) on pinctrl-single | |
| [ 0.188788] pinctrl core: registered pin 71 (PIN71) on pinctrl-single | |
| [ 0.188801] pinctrl core: registered pin 72 (PIN72) on pinctrl-single | |
| [ 0.188813] pinctrl core: registered pin 73 (PIN73) on pinctrl-single | |
| [ 0.188826] pinctrl core: registered pin 74 (PIN74) on pinctrl-single | |
| [ 0.188839] pinctrl core: registered pin 75 (PIN75) on pinctrl-single | |
| [ 0.188851] pinctrl core: registered pin 76 (PIN76) on pinctrl-single | |
| [ 0.188863] pinctrl core: registered pin 77 (PIN77) on pinctrl-single | |
| [ 0.188876] pinctrl core: registered pin 78 (PIN78) on pinctrl-single | |
| [ 0.188888] pinctrl core: registered pin 79 (PIN79) on pinctrl-single | |
| [ 0.188901] pinctrl core: registered pin 80 (PIN80) on pinctrl-single | |
| [ 0.188913] pinctrl core: registered pin 81 (PIN81) on pinctrl-single | |
| [ 0.188926] pinctrl core: registered pin 82 (PIN82) on pinctrl-single | |
| [ 0.188938] pinctrl core: registered pin 83 (PIN83) on pinctrl-single | |
| [ 0.188951] pinctrl core: registered pin 84 (PIN84) on pinctrl-single | |
| [ 0.188963] pinctrl core: registered pin 85 (PIN85) on pinctrl-single | |
| [ 0.188975] pinctrl core: registered pin 86 (PIN86) on pinctrl-single | |
| [ 0.188988] pinctrl core: registered pin 87 (PIN87) on pinctrl-single | |
| [ 0.189001] pinctrl core: registered pin 88 (PIN88) on pinctrl-single | |
| [ 0.189013] pinctrl core: registered pin 89 (PIN89) on pinctrl-single | |
| [ 0.189025] pinctrl core: registered pin 90 (PIN90) on pinctrl-single | |
| [ 0.189038] pinctrl core: registered pin 91 (PIN91) on pinctrl-single | |
| [ 0.189051] pinctrl core: registered pin 92 (PIN92) on pinctrl-single | |
| [ 0.189063] pinctrl core: registered pin 93 (PIN93) on pinctrl-single | |
| [ 0.189075] pinctrl core: registered pin 94 (PIN94) on pinctrl-single | |
| [ 0.189088] pinctrl core: registered pin 95 (PIN95) on pinctrl-single | |
| [ 0.189101] pinctrl core: registered pin 96 (PIN96) on pinctrl-single | |
| [ 0.189113] pinctrl core: registered pin 97 (PIN97) on pinctrl-single | |
| [ 0.189130] pinctrl core: registered pin 98 (PIN98) on pinctrl-single | |
| [ 0.189142] pinctrl core: registered pin 99 (PIN99) on pinctrl-single | |
| [ 0.189155] pinctrl core: registered pin 100 (PIN100) on pinctrl-single | |
| [ 0.189168] pinctrl core: registered pin 101 (PIN101) on pinctrl-single | |
| [ 0.189181] pinctrl core: registered pin 102 (PIN102) on pinctrl-single | |
| [ 0.189193] pinctrl core: registered pin 103 (PIN103) on pinctrl-single | |
| [ 0.189206] pinctrl core: registered pin 104 (PIN104) on pinctrl-single | |
| [ 0.189218] pinctrl core: registered pin 105 (PIN105) on pinctrl-single | |
| [ 0.189231] pinctrl core: registered pin 106 (PIN106) on pinctrl-single | |
| [ 0.189243] pinctrl core: registered pin 107 (PIN107) on pinctrl-single | |
| [ 0.189256] pinctrl core: registered pin 108 (PIN108) on pinctrl-single | |
| [ 0.189268] pinctrl core: registered pin 109 (PIN109) on pinctrl-single | |
| [ 0.189281] pinctrl core: registered pin 110 (PIN110) on pinctrl-single | |
| [ 0.189294] pinctrl core: registered pin 111 (PIN111) on pinctrl-single | |
| [ 0.189306] pinctrl core: registered pin 112 (PIN112) on pinctrl-single | |
| [ 0.189319] pinctrl core: registered pin 113 (PIN113) on pinctrl-single | |
| [ 0.189331] pinctrl core: registered pin 114 (PIN114) on pinctrl-single | |
| [ 0.189344] pinctrl core: registered pin 115 (PIN115) on pinctrl-single | |
| [ 0.189356] pinctrl core: registered pin 116 (PIN116) on pinctrl-single | |
| [ 0.189369] pinctrl core: registered pin 117 (PIN117) on pinctrl-single | |
| [ 0.189381] pinctrl core: registered pin 118 (PIN118) on pinctrl-single | |
| [ 0.189394] pinctrl core: registered pin 119 (PIN119) on pinctrl-single | |
| [ 0.189406] pinctrl core: registered pin 120 (PIN120) on pinctrl-single | |
| [ 0.189419] pinctrl core: registered pin 121 (PIN121) on pinctrl-single | |
| [ 0.189432] pinctrl core: registered pin 122 (PIN122) on pinctrl-single | |
| [ 0.189444] pinctrl core: registered pin 123 (PIN123) on pinctrl-single | |
| [ 0.189457] pinctrl core: registered pin 124 (PIN124) on pinctrl-single | |
| [ 0.189469] pinctrl core: registered pin 125 (PIN125) on pinctrl-single | |
| [ 0.189482] pinctrl core: registered pin 126 (PIN126) on pinctrl-single | |
| [ 0.189494] pinctrl core: registered pin 127 (PIN127) on pinctrl-single | |
| [ 0.189509] pinctrl core: registered pin 128 (PIN128) on pinctrl-single | |
| [ 0.189522] pinctrl core: registered pin 129 (PIN129) on pinctrl-single | |
| [ 0.189539] pinctrl core: registered pin 130 (PIN130) on pinctrl-single | |
| [ 0.189552] pinctrl core: registered pin 131 (PIN131) on pinctrl-single | |
| [ 0.189565] pinctrl core: registered pin 132 (PIN132) on pinctrl-single | |
| [ 0.189577] pinctrl core: registered pin 133 (PIN133) on pinctrl-single | |
| [ 0.189590] pinctrl core: registered pin 134 (PIN134) on pinctrl-single | |
| [ 0.189603] pinctrl core: registered pin 135 (PIN135) on pinctrl-single | |
| [ 0.189616] pinctrl core: registered pin 136 (PIN136) on pinctrl-single | |
| [ 0.189628] pinctrl core: registered pin 137 (PIN137) on pinctrl-single | |
| [ 0.189640] pinctrl core: registered pin 138 (PIN138) on pinctrl-single | |
| [ 0.189653] pinctrl core: registered pin 139 (PIN139) on pinctrl-single | |
| [ 0.189665] pinctrl core: registered pin 140 (PIN140) on pinctrl-single | |
| [ 0.189678] pinctrl core: registered pin 141 (PIN141) on pinctrl-single | |
| [ 0.189716] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
| [ 0.189746] pinctrl-single 44e10800.pinmux: pinmux_clkout2_pin index: 0x1b4 value: 0x3 | |
| [ 0.189779] pinctrl core: add 1 pinctrl maps | |
| [ 0.189805] pinctrl-single 44e10800.pinmux: found group selector 0 for pinmux_clkout2_pin | |
| [ 0.189825] pinctrl-single 44e10800.pinmux: request pin 109 (PIN109) for 44e10800.pinmux | |
| [ 0.189842] pinctrl-single 44e10800.pinmux: enabling pinmux_clkout2_pin function0 | |
| [ 0.189860] pinctrl-single 44e10800.pinmux: failed to lookup the sleep state | |
| [ 0.213429] gpio gpiochip0: (gpio-0-31): created GPIO range 0->7 ==> 44e10800.pinmux PIN 0->7 | |
| [ 0.213483] gpio gpiochip0: (gpio-0-31): created GPIO range 8->11 ==> 44e10800.pinmux PIN 90->93 | |
| [ 0.213503] gpio gpiochip0: (gpio-0-31): created GPIO range 12->27 ==> 44e10800.pinmux PIN 12->27 | |
| [ 0.213521] gpio gpiochip0: (gpio-0-31): created GPIO range 28->31 ==> 44e10800.pinmux PIN 30->33 | |
| [ 0.214659] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) | |
| [ 0.214817] gpio gpiochip0: registered GPIOs 0 to 31 on gpio-0-31 | |
| [ 0.214897] OMAP GPIO hardware version 0.1 | |
| [ 0.222850] pinctrl-single 44e10800.pinmux: pinmux_i2c2_pins index: 0x178 value: 0x33 | |
| [ 0.222902] pinctrl-single 44e10800.pinmux: pinmux_i2c2_pins index: 0x17c value: 0x33 | |
| [ 0.222935] pinctrl core: add 1 pinctrl maps | |
| [ 0.222965] pinctrl-single 44e10800.pinmux: found group selector 1 for pinmux_i2c2_pins | |
| [ 0.222987] pinctrl-single 44e10800.pinmux: request pin 94 (PIN94) for 4819c000.i2c | |
| [ 0.223002] pinctrl-single 44e10800.pinmux: request pin 95 (PIN95) for 4819c000.i2c | |
| [ 0.223017] pinctrl-single 44e10800.pinmux: enabling pinmux_i2c2_pins function1 | |
| [ 0.224680] i2c i2c-2: GPIO lookup for consumer scl | |
| [ 0.224716] i2c i2c-2: using device tree for GPIO lookup | |
| [ 0.224745] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224789] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224827] i2c i2c-2: using lookup tables for GPIO lookup | |
| [ 0.224841] i2c i2c-2: No GPIO consumer scl found | |
| [ 0.224859] i2c i2c-2: GPIO lookup for consumer sda | |
| [ 0.224869] i2c i2c-2: using device tree for GPIO lookup | |
| [ 0.224886] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224923] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224955] i2c i2c-2: using lookup tables for GPIO lookup | |
| [ 0.224966] i2c i2c-2: No GPIO consumer sda found | |
| [ 0.225580] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
| [ 0.230308] gpio gpiochip1: (gpio-32-63): created GPIO range 0->17 ==> 44e10800.pinmux PIN 34->51 | |
| [ 0.230358] gpio gpiochip1: (gpio-32-63): created GPIO range 18->21 ==> 44e10800.pinmux PIN 77->80 | |
| [ 0.230378] gpio gpiochip1: (gpio-32-63): created GPIO range 22->31 ==> 44e10800.pinmux PIN 56->65 | |
| [ 0.230862] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) | |
| [ 0.230999] gpio gpiochip1: registered GPIOs 32 to 63 on gpio-32-63 | |
| [ 0.232714] gpio gpiochip2: (gpio-64-95): created GPIO range 0->4 ==> 44e10800.pinmux PIN 66->70 | |
| [ 0.232753] gpio gpiochip2: (gpio-64-95): created GPIO range 5->6 ==> 44e10800.pinmux PIN 98->99 | |
| [ 0.232773] gpio gpiochip2: (gpio-64-95): created GPIO range 7->8 ==> 44e10800.pinmux PIN 75->76 | |
| [ 0.232791] gpio gpiochip2: (gpio-64-95): created GPIO range 13->13 ==> 44e10800.pinmux PIN 141->141 | |
| [ 0.232810] gpio gpiochip2: (gpio-64-95): created GPIO range 14->21 ==> 44e10800.pinmux PIN 100->107 | |
| [ 0.233212] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) | |
| [ 0.233321] gpio gpiochip2: registered GPIOs 64 to 95 on gpio-64-95 | |
| [ 0.246745] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x110 value: 0x30 | |
| [ 0.246798] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x114 value: 0x0 | |
| [ 0.246816] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x118 value: 0x30 | |
| [ 0.246833] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x11c value: 0x0 | |
| [ 0.246848] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x120 value: 0x0 | |
| [ 0.246864] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x124 value: 0x0 | |
| [ 0.246880] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x128 value: 0x0 | |
| [ 0.246896] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x12c value: 0x30 | |
| [ 0.246912] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x130 value: 0x30 | |
| [ 0.246927] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x134 value: 0x30 | |
| [ 0.246943] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x138 value: 0x30 | |
| [ 0.246958] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x13c value: 0x30 | |
| [ 0.246974] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x140 value: 0x30 | |
| [ 0.247127] pinctrl core: add 1 pinctrl maps | |
| [ 0.247175] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x110 value: 0x27 | |
| [ 0.247196] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x114 value: 0x27 | |
| [ 0.247213] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x118 value: 0x27 | |
| [ 0.247228] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x11c value: 0x27 | |
| [ 0.247244] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x120 value: 0x27 | |
| [ 0.247259] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x124 value: 0x27 | |
| [ 0.247275] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x128 value: 0x27 | |
| [ 0.247290] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x12c value: 0x27 | |
| [ 0.247306] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x130 value: 0x27 | |
| [ 0.247321] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x134 value: 0x27 | |
| [ 0.247336] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x138 value: 0x27 | |
| [ 0.247352] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x13c value: 0x27 | |
| [ 0.247367] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x140 value: 0x27 | |
| [ 0.247392] pinctrl core: add 1 pinctrl maps | |
| [ 0.247419] pinctrl-single 44e10800.pinmux: found group selector 2 for cpsw_default | |
| [ 0.247442] pinctrl-single 44e10800.pinmux: found group selector 3 for cpsw_sleep | |
| [ 0.247462] pinctrl-single 44e10800.pinmux: request pin 68 (PIN68) for 4a100000.ethernet | |
| [ 0.247477] pinctrl-single 44e10800.pinmux: request pin 69 (PIN69) for 4a100000.ethernet | |
| [ 0.247492] pinctrl-single 44e10800.pinmux: request pin 70 (PIN70) for 4a100000.ethernet | |
| [ 0.247505] pinctrl-single 44e10800.pinmux: request pin 71 (PIN71) for 4a100000.ethernet | |
| [ 0.247518] pinctrl-single 44e10800.pinmux: request pin 72 (PIN72) for 4a100000.ethernet | |
| [ 0.247531] pinctrl-single 44e10800.pinmux: request pin 73 (PIN73) for 4a100000.ethernet | |
| [ 0.247544] pinctrl-single 44e10800.pinmux: request pin 74 (PIN74) for 4a100000.ethernet | |
| [ 0.247557] pinctrl-single 44e10800.pinmux: request pin 75 (PIN75) for 4a100000.ethernet | |
| [ 0.247570] pinctrl-single 44e10800.pinmux: request pin 76 (PIN76) for 4a100000.ethernet | |
| [ 0.247583] pinctrl-single 44e10800.pinmux: request pin 77 (PIN77) for 4a100000.ethernet | |
| [ 0.247596] pinctrl-single 44e10800.pinmux: request pin 78 (PIN78) for 4a100000.ethernet | |
| [ 0.247609] pinctrl-single 44e10800.pinmux: request pin 79 (PIN79) for 4a100000.ethernet | |
| [ 0.247622] pinctrl-single 44e10800.pinmux: request pin 80 (PIN80) for 4a100000.ethernet | |
| [ 0.247638] pinctrl-single 44e10800.pinmux: enabling cpsw_default function2 | |
| [ 0.248478] pinctrl-single 44e10800.pinmux: davinci_mdio_default index: 0x148 value: 0x30 | |
| [ 0.248516] pinctrl-single 44e10800.pinmux: davinci_mdio_default index: 0x14c value: 0x10 | |
| [ 0.248542] pinctrl core: add 1 pinctrl maps | |
| [ 0.248567] pinctrl-single 44e10800.pinmux: davinci_mdio_sleep index: 0x148 value: 0x27 | |
| [ 0.248584] pinctrl-single 44e10800.pinmux: davinci_mdio_sleep index: 0x14c value: 0x27 | |
| [ 0.248604] pinctrl core: add 1 pinctrl maps | |
| [ 0.248628] pinctrl-single 44e10800.pinmux: found group selector 4 for davinci_mdio_default | |
| [ 0.248646] pinctrl-single 44e10800.pinmux: found group selector 5 for davinci_mdio_sleep | |
| [ 0.248665] pinctrl-single 44e10800.pinmux: request pin 82 (PIN82) for 4a101000.mdio | |
| [ 0.248679] pinctrl-single 44e10800.pinmux: request pin 83 (PIN83) for 4a101000.mdio | |
| [ 0.248694] pinctrl-single 44e10800.pinmux: enabling davinci_mdio_default function4 | |
| [ 0.249246] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset | |
| [ 0.249270] mdio_bus 4a101000.mdio: using device tree for GPIO lookup | |
| [ 0.249294] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' | |
| [ 0.249339] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' | |
| [ 0.249381] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup | |
| [ 0.249394] mdio_bus 4a101000.mdio: No GPIO consumer reset found | |
| [ 0.250043] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x80 value: 0x32 | |
| [ 0.250083] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x84 value: 0x32 | |
| [ 0.250100] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x0 value: 0x31 | |
| [ 0.250116] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x4 value: 0x31 | |
| [ 0.250132] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x8 value: 0x31 | |
| [ 0.250147] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0xc value: 0x31 | |
| [ 0.250162] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x10 value: 0x31 | |
| [ 0.250178] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x14 value: 0x31 | |
| [ 0.250193] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x18 value: 0x31 | |
| [ 0.250209] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x1c value: 0x31 | |
| [ 0.250237] pinctrl core: add 1 pinctrl maps | |
| [ 0.250265] pinctrl-single 44e10800.pinmux: found group selector 6 for pinmux_emmc_pins | |
| [ 0.250284] pinctrl-single 44e10800.pinmux: request pin 32 (PIN32) for 481d8000.mmc | |
| [ 0.250300] pinctrl-single 44e10800.pinmux: request pin 33 (PIN33) for 481d8000.mmc | |
| [ 0.250313] pinctrl-single 44e10800.pinmux: request pin 0 (PIN0) for 481d8000.mmc | |
| [ 0.250326] pinctrl-single 44e10800.pinmux: request pin 1 (PIN1) for 481d8000.mmc | |
| [ 0.250339] pinctrl-single 44e10800.pinmux: request pin 2 (PIN2) for 481d8000.mmc | |
| [ 0.250352] pinctrl-single 44e10800.pinmux: request pin 3 (PIN3) for 481d8000.mmc | |
| [ 0.250364] pinctrl-single 44e10800.pinmux: request pin 4 (PIN4) for 481d8000.mmc | |
| [ 0.250377] pinctrl-single 44e10800.pinmux: request pin 5 (PIN5) for 481d8000.mmc | |
| [ 0.250390] pinctrl-single 44e10800.pinmux: request pin 6 (PIN6) for 481d8000.mmc | |
| [ 0.250403] pinctrl-single 44e10800.pinmux: request pin 7 (PIN7) for 481d8000.mmc | |
| [ 0.250418] pinctrl-single 44e10800.pinmux: enabling pinmux_emmc_pins function6 | |
| [ 0.250718] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp | |
| [ 0.250741] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup | |
| [ 0.250762] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 0.250809] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 0.250844] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup | |
| [ 0.250857] sdhci-omap 481d8000.mmc: No GPIO consumer wp found | |
| [ 0.251029] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator | |
| [ 0.307043] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 | |
| [ 0.307097] libphy: 4a101000.mdio: probed | |
| [ 0.308419] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset | |
| [ 0.308458] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup | |
| [ 0.308485] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' | |
| [ 0.308548] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' | |
| [ 0.308594] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup | |
| [ 0.308607] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found | |
| [ 0.309336] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 | |
| [ 0.309629] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 | |
| [ 0.309653] cpsw 4a100000.ethernet: ALE Table size 1024 | |
| [ 0.309768] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) | |
| [ 0.309855] cpsw 4a100000.ethernet: Detected MACID = 1c:ba:8c:9b:be:b4 | |
| [ 0.318439] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! | |
| [ 0.318494] edma 49000000.dma: TI EDMA DMA engine driver | |
| [ 0.334021] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
| [ 0.334442] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 0.334768] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 0.335025] gpio-clk clk_mcasp0: GPIO lookup for consumer enable | |
| [ 0.335048] gpio-clk clk_mcasp0: using device tree for GPIO lookup | |
| [ 0.335087] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/clk_mcasp0[0]' - status (0) | |
| [ 0.335200] gpio gpiochip0: Persistence not supported for GPIO 27 | |
| [ 0.335925] gpio-mux mux-controller: GPIO lookup for consumer mux | |
| [ 0.335951] gpio-mux mux-controller: using device tree for GPIO lookup | |
| [ 0.335982] of_get_named_gpiod_flags: parsed 'mux-gpios' property of node '/mux-controller[0]' - status (0) | |
| [ 0.336076] gpio gpiochip1: Persistence not supported for GPIO 2 | |
| [ 0.336095] gpio-mux mux-controller: GPIO lookup for consumer mux | |
| [ 0.336108] gpio-mux mux-controller: using device tree for GPIO lookup | |
| [ 0.336133] of_get_named_gpiod_flags: parsed 'mux-gpios' property of node '/mux-controller[1]' - status (0) | |
| [ 0.336161] gpio gpiochip1: Persistence not supported for GPIO 3 | |
| [ 0.336299] gpio-mux mux-controller: 4-way mux-controller registered | |
| [ 0.336655] gpio gpiochip3: (gpio-96-127): created GPIO range 0->7 ==> 44e10800.pinmux PIN 82->89 | |
| [ 0.336684] gpio gpiochip3: (gpio-96-127): created GPIO range 8->11 ==> 44e10800.pinmux PIN 52->55 | |
| [ 0.336703] gpio gpiochip3: (gpio-96-127): created GPIO range 12->15 ==> 44e10800.pinmux PIN 94->97 | |
| [ 0.336722] gpio gpiochip3: (gpio-96-127): created GPIO range 16->17 ==> 44e10800.pinmux PIN 71->72 | |
| [ 0.336740] gpio gpiochip3: (gpio-96-127): created GPIO range 18->18 ==> 44e10800.pinmux PIN 135->135 | |
| [ 0.336759] gpio gpiochip3: (gpio-96-127): created GPIO range 19->20 ==> 44e10800.pinmux PIN 108->109 | |
| [ 0.336781] gpio gpiochip3: (gpio-96-127): created GPIO range 21->21 ==> 44e10800.pinmux PIN 73->73 | |
| [ 0.336801] gpio gpiochip3: (gpio-96-127): created GPIO range 22->23 ==> 44e10800.pinmux PIN 8->9 | |
| [ 0.336820] gpio gpiochip3: (gpio-96-127): created GPIO range 26->27 ==> 44e10800.pinmux PIN 10->11 | |
| [ 0.336839] gpio gpiochip3: (gpio-96-127): created GPIO range 28->28 ==> 44e10800.pinmux PIN 74->74 | |
| [ 0.336869] gpio gpiochip3: (gpio-96-127): created GPIO range 29->29 ==> 44e10800.pinmux PIN 81->81 | |
| [ 0.336890] gpio gpiochip3: (gpio-96-127): created GPIO range 30->31 ==> 44e10800.pinmux PIN 28->29 | |
| [ 0.342313] l3-aon-clkctrl:0000:0: failed to disable | |
| [ 0.342591] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3) | |
| [ 0.342714] gpio gpiochip3: registered GPIOs 96 to 127 on gpio-96-127 | |
| [ 0.343199] pinctrl-single 44e10800.pinmux: pinmux_uart0_pins index: 0x170 value: 0x30 | |
| [ 0.343229] pinctrl-single 44e10800.pinmux: pinmux_uart0_pins index: 0x174 value: 0x0 | |
| [ 0.343265] pinctrl core: add 1 pinctrl maps | |
| [ 0.343299] pinctrl-single 44e10800.pinmux: found group selector 7 for pinmux_uart0_pins | |
| [ 0.343321] pinctrl-single 44e10800.pinmux: request pin 92 (PIN92) for 44e09000.serial | |
| [ 0.343336] pinctrl-single 44e10800.pinmux: request pin 93 (PIN93) for 44e09000.serial | |
| [ 0.343351] pinctrl-single 44e10800.pinmux: enabling pinmux_uart0_pins function7 | |
| [ 0.344158] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term | |
| [ 0.344190] omap8250 44e09000.serial: using device tree for GPIO lookup | |
| [ 0.344214] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' | |
| [ 0.344261] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' | |
| [ 0.344301] omap8250 44e09000.serial: using lookup tables for GPIO lookup | |
| [ 0.344314] omap8250 44e09000.serial: No GPIO consumer rs485-term found | |
| [ 0.344364] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 18, base_baud = 3000000) is a 8250 | |
| [ 2.492865] random: fast init done | |
| [ 3.596172] printk: console [ttyS0] enabled | |
| [ 3.601317] pinctrl-single 44e10800.pinmux: pinmux_i2c0_pins index: 0x188 value: 0x30 | |
| [ 3.609315] pinctrl-single 44e10800.pinmux: pinmux_i2c0_pins index: 0x18c value: 0x30 | |
| [ 3.617254] pinctrl core: add 1 pinctrl maps | |
| [ 3.621572] pinctrl-single 44e10800.pinmux: found group selector 8 for pinmux_i2c0_pins | |
| [ 3.629648] pinctrl-single 44e10800.pinmux: request pin 98 (PIN98) for 44e0b000.i2c | |
| [ 3.637365] pinctrl-single 44e10800.pinmux: request pin 99 (PIN99) for 44e0b000.i2c | |
| [ 3.645061] pinctrl-single 44e10800.pinmux: enabling pinmux_i2c0_pins function8 | |
| [ 3.653576] i2c i2c-0: GPIO lookup for consumer scl | |
| [ 3.658593] i2c i2c-0: using device tree for GPIO lookup | |
| [ 3.663951] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.677554] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.691051] i2c i2c-0: using lookup tables for GPIO lookup | |
| [ 3.696566] i2c i2c-0: No GPIO consumer scl found | |
| [ 3.701317] i2c i2c-0: GPIO lookup for consumer sda | |
| [ 3.706217] i2c i2c-0: using device tree for GPIO lookup | |
| [ 3.711576] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.725154] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.738641] i2c i2c-0: using lookup tables for GPIO lookup | |
| [ 3.744153] i2c i2c-0: No GPIO consumer sda found | |
| [ 3.777764] tps65217-pmic: Failed to locate of_node [id: -1] | |
| [ 3.783646] tps65217-pmic tps65217-pmic: no of_node; not parsing pinctrl DT | |
| [ 3.799906] tps65217-bl: Failed to locate of_node [id: -1] | |
| [ 3.808415] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
| [ 3.814382] i2c 0-0070: Fixing up cyclic dependency with 4830e000.lcdc | |
| [ 3.821324] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
| [ 3.827963] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 3.828012] gpio-mux-input key-mux1: GPIO lookup for consumer pin | |
| [ 3.838757] gpio-mux-input key-mux1: using device tree for GPIO lookup | |
| [ 3.845346] of_get_named_gpiod_flags: parsed 'pin-gpios' property of node '/key-mux1[0]' - status (0) | |
| [ 3.854666] gpio gpiochip1: Persistence not supported for GPIO 5 | |
| [ 3.860757] gpiochip_find_base: found new base at 508 | |
| [ 3.865848] DEBUG gpio_mux_input_get_value(): offset=0, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.865857] DEBUG gpio_mux_input_get_value(): offset=1, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.873916] DEBUG gpio_mux_input_get_value(): offset=2, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.881971] DEBUG gpio_mux_input_get_value(): offset=3, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.890569] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0x160 value: 0x2f | |
| [ 3.906555] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xfc value: 0x30 | |
| [ 3.914387] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xf8 value: 0x30 | |
| [ 3.922192] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xf4 value: 0x30 | |
| [ 3.929994] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xf0 value: 0x30 | |
| [ 3.937795] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0x104 value: 0x30 | |
| [ 3.945666] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0x100 value: 0x30 | |
| [ 3.953572] pinctrl core: add 1 pinctrl maps | |
| [ 3.957908] pinctrl-single 44e10800.pinmux: found group selector 9 for pinmux_mmc1_pins | |
| [ 3.965958] pinctrl-single 44e10800.pinmux: request pin 88 (PIN88) for 48060000.mmc | |
| [ 3.973675] pinctrl-single 44e10800.pinmux: request pin 63 (PIN63) for 48060000.mmc | |
| [ 3.981387] pinctrl-single 44e10800.pinmux: request pin 62 (PIN62) for 48060000.mmc | |
| [ 3.989096] pinctrl-single 44e10800.pinmux: request pin 61 (PIN61) for 48060000.mmc | |
| [ 3.996791] pinctrl-single 44e10800.pinmux: request pin 60 (PIN60) for 48060000.mmc | |
| [ 4.004498] pinctrl-single 44e10800.pinmux: request pin 65 (PIN65) for 48060000.mmc | |
| [ 4.012210] pinctrl-single 44e10800.pinmux: request pin 64 (PIN64) for 48060000.mmc | |
| [ 4.019921] pinctrl-single 44e10800.pinmux: enabling pinmux_mmc1_pins function9 | |
| [ 4.027583] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd | |
| [ 4.033627] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
| [ 4.040252] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' - status (0) | |
| [ 4.054173] gpio gpiochip3: Persistence not supported for GPIO 6 | |
| [ 4.060248] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
| [ 4.069017] sdhci-omap 48060000.mmc: Got CD GPIO | |
| [ 4.073659] sdhci-omap 48060000.mmc: GPIO lookup for consumer wp | |
| [ 4.079710] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
| [ 4.086276] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
| [ 4.099434] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
| [ 4.112491] sdhci-omap 48060000.mmc: using lookup tables for GPIO lookup | |
| [ 4.119245] sdhci-omap 48060000.mmc: No GPIO consumer wp found | |
| [ 4.125280] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator | |
| [ 4.134047] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x80 value: 0x32 | |
| [ 4.141943] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x84 value: 0x32 | |
| [ 4.149754] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x0 value: 0x31 | |
| [ 4.157497] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x4 value: 0x31 | |
| [ 4.165197] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x8 value: 0x31 | |
| [ 4.172911] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0xc value: 0x31 | |
| [ 4.180623] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x10 value: 0x31 | |
| [ 4.188423] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x14 value: 0x31 | |
| [ 4.196207] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x18 value: 0x31 | |
| [ 4.204005] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x1c value: 0x31 | |
| [ 4.211820] pinctrl core: add 1 pinctrl maps | |
| [ 4.216134] pinctrl-single 44e10800.pinmux: found group selector 6 for pinmux_emmc_pins | |
| [ 4.224206] pinctrl-single 44e10800.pinmux: request pin 32 (PIN32) for 481d8000.mmc | |
| [ 4.231920] pinctrl-single 44e10800.pinmux: request pin 33 (PIN33) for 481d8000.mmc | |
| [ 4.239631] pinctrl-single 44e10800.pinmux: request pin 0 (PIN0) for 481d8000.mmc | |
| [ 4.247165] pinctrl-single 44e10800.pinmux: request pin 1 (PIN1) for 481d8000.mmc | |
| [ 4.254684] pinctrl-single 44e10800.pinmux: request pin 2 (PIN2) for 481d8000.mmc | |
| [ 4.262217] pinctrl-single 44e10800.pinmux: request pin 3 (PIN3) for 481d8000.mmc | |
| [ 4.269752] pinctrl-single 44e10800.pinmux: request pin 4 (PIN4) for 481d8000.mmc | |
| [ 4.277285] pinctrl-single 44e10800.pinmux: request pin 5 (PIN5) for 481d8000.mmc | |
| [ 4.284804] pinctrl-single 44e10800.pinmux: request pin 6 (PIN6) for 481d8000.mmc | |
| [ 4.292337] pinctrl-single 44e10800.pinmux: request pin 7 (PIN7) for 481d8000.mmc | |
| [ 4.299872] pinctrl-single 44e10800.pinmux: enabling pinmux_emmc_pins function6 | |
| [ 4.307531] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp | |
| [ 4.313575] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup | |
| [ 4.320192] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 4.333790] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 4.347284] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup | |
| [ 4.354021] sdhci-omap 481d8000.mmc: No GPIO consumer wp found | |
| [ 4.360160] gpio gpiochip4: (key-mux1): added GPIO chardev (254:4) | |
| [ 4.366498] gpio gpiochip4: registered GPIOs 508 to 511 on key-mux1 | |
| [ 4.372855] gpio-mux-input key-mux1: registered 4 input GPIOs | |
| [ 4.378648] DEBUG gpio_mux_input_probe(): return 0 | |
| [ 4.378944] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 4.383784] gpio-mux-input key-mux2: GPIO lookup for consumer pin | |
| [ 4.394495] gpio-mux-input key-mux2: using device tree for GPIO lookup | |
| [ 4.401107] of_get_named_gpiod_flags: parsed 'pin-gpios' property of node '/key-mux2[0]' - status (0) | |
| [ 4.410423] gpio gpiochip1: Persistence not supported for GPIO 4 | |
| [ 4.416485] gpiochip_find_base: found new base at 504 | |
| [ 4.421599] DEBUG gpio_mux_input_get_value(): offset=0, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.421609] DEBUG gpio_mux_input_get_value(): offset=1, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.429665] DEBUG gpio_mux_input_get_value(): offset=2, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.437719] DEBUG gpio_mux_input_get_value(): offset=3, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.446045] gpio gpiochip5: (key-mux2): added GPIO chardev (254:5) | |
| [ 4.460445] gpio gpiochip5: registered GPIOs 504 to 507 on key-mux2 | |
| [ 4.466749] gpio-mux-input key-mux2: registered 4 input GPIOs | |
| [ 4.472545] DEBUG gpio_mux_input_probe(): return 0 | |
| [ 4.476250] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator | |
| [ 4.516065] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA | |
| [ 4.524336] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA | |
| [ 4.532726] Waiting for root device /dev/mmcblk0p1... | |
| [ 4.600113] mmc0: new high speed SDHC card at address aaaa | |
| [ 4.605912] mmcblk mmc0:aaaa: no of_node; not parsing pinctrl DT | |
| [ 4.612847] mmcblk0: mmc0:aaaa SL08G 7.40 GiB | |
| [ 4.619794] mmcblk0: p1 | |
| [ 4.626356] mmc1: new high speed MMC card at address 0001 | |
| [ 4.632124] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT | |
| [ 4.638977] mmcblk1: mmc1:0001 MMC04G 3.66 GiB | |
| [ 4.643907] mmcblk1boot0: mmc1:0001 MMC04G 1.00 MiB | |
| [ 4.649307] mmcblk1boot1: mmc1:0001 MMC04G 1.00 MiB | |
| [ 4.654658] mmcblk1rpmb: mmc1:0001 MMC04G 128 KiB, chardev (249:0) | |
| [ 4.678630] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. | |
| [ 4.688664] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. | |
| [ 4.696860] devtmpfs: mounted | |
| [ 4.701547] Freeing unused kernel memory: 1024K | |
| [ 4.706570] Run /sbin/init as init process | |
| [ 4.710732] with arguments: | |
| [ 4.713718] /sbin/init | |
| [ 4.716435] with environment: | |
| [ 4.719606] HOME=/ | |
| [ 4.721976] TERM=linux | |
| [ 5.249325] systemd[1]: System time before build time, advancing clock. | |
| [ 5.322379] systemd[1]: Inserted module 'autofs4' | |
| [ 5.377655] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 5.399934] systemd[1]: Detected architecture arm. | |
| [ 5.417598] systemd[1]: Set hostname to <beaglebone>. | |
| [ 6.325058] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
| [ 6.342640] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
| [ 6.741926] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.763237] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.771046] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ 6.779333] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.790329] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ 6.797644] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ 6.805574] systemd[1]: Listening on Journal Audit Socket. | |
| [ 6.812218] systemd[1]: Listening on udev Kernel Socket. | |
| [ 7.917629] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro. Quota mode: none. | |
| [ 9.876079] systemd-journald[83]: Received request to flush runtime journal from PID 1 | |
| [ 10.031347] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT | |
| [ 11.067216] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x54 value: 0x7 | |
| [ 11.074622] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x58 value: 0x17 | |
| [ 11.082126] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x5c value: 0x7 | |
| [ 11.089504] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x60 value: 0x17 | |
| [ 11.096968] pinctrl core: add 1 pinctrl maps | |
| [ 11.101312] pinctrl-single 44e10800.pinmux: found group selector 10 for user_leds_s0 | |
| [ 11.109128] pinctrl-single 44e10800.pinmux: request pin 21 (PIN21) for leds | |
| [ 11.116128] pinctrl-single 44e10800.pinmux: request pin 22 (PIN22) for leds | |
| [ 11.123146] pinctrl-single 44e10800.pinmux: request pin 23 (PIN23) for leds | |
| [ 11.130172] pinctrl-single 44e10800.pinmux: request pin 24 (PIN24) for leds | |
| [ 11.137191] pinctrl-single 44e10800.pinmux: enabling user_leds_s0 function10 | |
| [ 11.144381] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led2[0]' - status (0) | |
| [ 11.153457] gpio gpiochip0: Persistence not supported for GPIO 21 | |
| [ 11.159603] gpio-21 (?): no flags found for gpios | |
| [ 11.164581] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led3[0]' - status (0) | |
| [ 11.173661] gpio gpiochip0: Persistence not supported for GPIO 22 | |
| [ 11.179806] gpio-22 (?): no flags found for gpios | |
| [ 11.184705] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led4[0]' - status (0) | |
| [ 11.193767] gpio gpiochip0: Persistence not supported for GPIO 23 | |
| [ 11.199908] gpio-23 (?): no flags found for gpios | |
| [ 11.204781] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led5[0]' - status (0) | |
| [ 11.213848] gpio gpiochip0: Persistence not supported for GPIO 24 | |
| [ 11.219992] gpio-24 (?): no flags found for gpios | |
| [ 12.739975] omap_rtc 44e3e000.rtc: already running | |
| [ 12.745247] omap_rtc 44e3e000.rtc: try to register 4 pins ... | |
| [ 12.751221] pinctrl core: registered pin 0 (ext_wakeup0) on 44e3e000.rtc | |
| [ 12.758009] pinctrl core: registered pin 1 (ext_wakeup1) on 44e3e000.rtc | |
| [ 12.764747] pinctrl core: registered pin 2 (ext_wakeup2) on 44e3e000.rtc | |
| [ 12.771504] pinctrl core: registered pin 3 (ext_wakeup3) on 44e3e000.rtc | |
| [ 12.778271] omap_rtc 44e3e000.rtc: no hogs found | |
| [ 13.257953] alarmtimer alarmtimer.0.auto: no of_node; not parsing pinctrl DT | |
| [ 13.265402] omap_rtc 44e3e000.rtc: registered as rtc0 | |
| [ 13.270692] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T01:37:29 UTC (946690649) | |
| [ 13.279409] omap_rtc 44e3e000.rtc: GPIO lookup for consumer wp | |
| [ 13.285273] omap_rtc 44e3e000.rtc: using device tree for GPIO lookup | |
| [ 13.291702] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
| [ 13.305308] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
| [ 13.318811] omap_rtc 44e3e000.rtc: using lookup tables for GPIO lookup | |
| [ 13.325373] omap_rtc 44e3e000.rtc: No GPIO consumer wp found | |
| [ 14.020420] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 14.026298] PM: Cannot get wkup_m3_ipc handle | |
| [ 17.073224] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 17.079266] PM: Cannot get wkup_m3_ipc handle | |
| [ 17.249423] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset | |
| [ 17.256726] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
| [ 17.264453] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.275985] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.287392] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
| [ 17.295088] am335x-phy-driver 47401300.usb-phy: No GPIO consumer reset found | |
| [ 17.302194] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect | |
| [ 17.309996] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
| [ 17.317542] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.329550] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.341465] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
| [ 17.349177] am335x-phy-driver 47401300.usb-phy: No GPIO consumer vbus-detect found | |
| [ 17.356891] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator | |
| [ 17.391249] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 17.397353] PM: Cannot get wkup_m3_ipc handle | |
| [ 17.678987] usbcore: registered new interface driver usbfs | |
| [ 17.684603] usbcore: registered new interface driver hub | |
| [ 17.690218] usbcore: registered new device driver usb | |
| [ 19.208704] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset | |
| [ 19.216008] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
| [ 19.223708] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.235242] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.246649] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
| [ 19.254367] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer reset found | |
| [ 19.261468] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect | |
| [ 19.269267] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
| [ 19.276791] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.288797] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.300710] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
| [ 19.308422] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer vbus-detect found | |
| [ 19.316138] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator | |
| [ 19.325734] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 19.331682] PM: Cannot get wkup_m3_ipc handle | |
| [ 19.528149] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 19.534026] PM: Cannot get wkup_m3_ipc handle | |
| [ 21.457464] remoteproc remoteproc0: wkup_m3 is available | |
| [ 21.464684] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 21.470704] PM: Cannot get wkup_m3_ipc handle | |
| [ 21.937434] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
| [ 21.942841] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
| [ 22.336954] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 | |
| [ 22.345485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 22.352812] usb usb1: Product: MUSB HDRC host driver | |
| [ 22.357828] usb usb1: Manufacturer: Linux 5.13.0-rc2no-fix-omap2plus-r0 musb-hcd | |
| [ 22.365261] usb usb1: SerialNumber: musb-hdrc.1 | |
| [ 23.287600] hub 1-0:1.0: USB hub found | |
| [ 23.377859] hub 1-0:1.0: 1 port detected | |
| [ 23.507923] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 23.513797] PM: Cannot get wkup_m3_ipc handle | |
| [ 23.805401] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) | |
| [ 24.159280] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) | |
| [ 26.821476] at24 2-0054: supply vcc not found, using dummy regulator | |
| [ 26.828533] at24 2-0054: GPIO lookup for consumer wp | |
| [ 26.833541] at24 2-0054: using device tree for GPIO lookup | |
| [ 26.839179] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom0@54[0]' | |
| [ 26.854193] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom0@54[0]' | |
| [ 26.869097] at24 2-0054: using lookup tables for GPIO lookup | |
| [ 26.874788] at24 2-0054: No GPIO consumer wp found | |
| [ 27.962795] at24 2-0055: supply vcc not found, using dummy regulator | |
| [ 27.969666] at24 2-0055: GPIO lookup for consumer wp | |
| [ 27.974672] at24 2-0055: using device tree for GPIO lookup | |
| [ 27.980295] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom1@55[0]' | |
| [ 27.995301] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom1@55[0]' | |
| [ 28.010204] at24 2-0055: using lookup tables for GPIO lookup | |
| [ 28.015892] at24 2-0055: No GPIO consumer wp found | |
| [ 28.539654] using random self ethernet address | |
| [ 28.544162] using random host ethernet address | |
| [ 28.778240] rndis_register: configNr = 0 | |
| [ 28.938186] at24 2-0056: supply vcc not found, using dummy regulator | |
| [ 28.944921] at24 2-0056: GPIO lookup for consumer wp | |
| [ 28.950102] at24 2-0056: using device tree for GPIO lookup | |
| [ 28.955637] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom2@56[0]' | |
| [ 28.970651] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom2@56[0]' | |
| [ 28.985552] at24 2-0056: using lookup tables for GPIO lookup | |
| [ 28.991259] at24 2-0056: No GPIO consumer wp found | |
| [ 29.156616] Mass Storage Function, version: 2009/09/11 | |
| [ 29.162001] LUN: removable file: (no medium) | |
| [ 29.196588] mass_storage.usb0/lun.0: read-only status set to 1 | |
| [ 29.277523] mass_storage.usb0/lun.0: open backing file: /var/cache/doc-beaglebone-getting-started/beaglebone-getting-started-2019-10-31.img | |
| [ 30.051880] at24 2-0057: supply vcc not found, using dummy regulator | |
| [ 30.058812] at24 2-0057: GPIO lookup for consumer wp | |
| [ 30.063818] at24 2-0057: using device tree for GPIO lookup | |
| [ 30.069433] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom3@57[0]' | |
| [ 30.084453] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom3@57[0]' | |
| [ 30.099357] at24 2-0057: using lookup tables for GPIO lookup | |
| [ 30.105045] at24 2-0057: No GPIO consumer wp found | |
| Debian GNU/Linux 10 beaglebone ttyS0 | |
| BeagleBoard.org Debian Buster IoT Image 2021-01-11 | |
| Support: https://bbb.io/debian | |
| default username:password is [debian:temppwd] | |
| beaglebone login: [ 30.413830] using random self ethernet address | |
| [ 30.418509] using random host ethernet address | |
| [ 30.649529] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
| [ 30.687693] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 30.693583] PM: Cannot get wkup_m3_ipc handle | |
| [ 30.700877] remoteproc remoteproc0: powering up wkup_m3 | |
| [ 30.740147] userial_init: registered 8 ttyGS* devices | |
| [ 30.758943] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 | |
| [ 30.768650] remoteproc remoteproc0: request_firmware failed: -2 | |
| [ 30.774610] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed | |
| [ 30.872960] udc musb-hdrc.0: registering UDC driver [g_multi] | |
| [ 30.878961] configfs-gadget gadget: adding 'rndis'/(ptrval) to config 'c'/(ptrval) | |
| [ 30.887621] usb0: HOST MAC 1c:ba:8c:a2:ed:6b | |
| [ 30.892028] usb0: MAC 1c:ba:8c:a2:ed:6a | |
| [ 30.895910] rndis_set_param_medium: 0 0 | |
| [ 30.899837] configfs-gadget gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in | |
| [ 30.907829] configfs-gadget gadget: adding 'Mass Storage Function'/(ptrval) to config 'c'/(ptrval) | |
| [ 31.161308] at24 0-0050: supply vcc not found, using dummy regulator | |
| [ 31.168202] at24 0-0050: GPIO lookup for consumer wp | |
| [ 31.173211] at24 0-0050: using device tree for GPIO lookup | |
| [ 31.178834] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/baseboard_eeprom@50[0]' | |
| [ 31.194105] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/baseboard_eeprom@50[0]' | |
| [ 31.209285] at24 0-0050: using lookup tables for GPIO lookup | |
| [ 31.214974] at24 0-0050: No GPIO consumer wp found | |
| [ 31.647528] configfs-gadget gadget: I/O thread pid: 771 | |
| [ 31.652869] configfs-gadget gadget: adding 'cdc_network'/(ptrval) to config 'c'/(ptrval) | |
| [ 31.662096] usb1: HOST MAC 1c:ba:8c:a2:ed:6d | |
| [ 31.666501] usb1: MAC 1c:ba:8c:a2:ed:6e | |
| [ 31.670475] configfs-gadget gadget: CDC Network: dual speed IN/ep4in OUT/ep3out NOTIFY/ep5in | |
| [ 31.678993] configfs-gadget gadget: adding 'acm'/(ptrval) to config 'c'/(ptrval) | |
| [ 31.686442] configfs-gadget gadget: acm ttyGS0: dual speed IN/ep6in OUT/ep4out NOTIFY/ep7in | |
| [ 32.047619] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
| [ 32.056571] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 32.062587] PM: Cannot get wkup_m3_ipc handle | |
| [ 32.311126] configfs-gadget gadget: high-speed config #1: c | |
| [ 32.316856] configfs-gadget gadget: init rndis | |
| [ 32.321324] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 32.327824] usb0: qlen 10 | |
| [ 32.330461] configfs-gadget gadget: rndis_close | |
| [ 32.335013] rndis_set_param_medium: 0 0 | |
| [ 32.338878] rndis_set_param_dev: | |
| [ 32.342143] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 32.352019] configfs-gadget gadget: delayed_status count 1 | |
| [ 32.357530] configfs-gadget gadget: reset ncm control 3 | |
| [ 32.362778] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 32.367684] configfs-gadget gadget: notify speed 425984000 | |
| [ 32.373221] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 32.378210] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 32.383465] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| [ 32.389832] configfs-gadget gadget: usb_composite_setup_continue | |
| [ 32.395889] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| [ 32.404931] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 32.411243] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 32.415611] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.422072] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 32.428336] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 32.434260] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.440696] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 32.446960] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 32.453208] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.459677] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 32.465927] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 32.472974] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.481078] configfs-gadget gadget: init ncm | |
| [ 32.485406] configfs-gadget gadget: activate ncm | |
| [ 32.490070] usb1: qlen 10 | |
| [ 32.492705] configfs-gadget gadget: ncm_close | |
| [ 32.498058] configfs-gadget gadget: reset ncm | |
| [ 32.502464] usb1: gether_disconnect | |
| [ 32.506035] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 32.512578] configfs-gadget gadget: non-CRC mode selected | |
| [ 32.518020] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 32.524032] configfs-gadget gadget: NCM16 selected | |
| [ 32.528848] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 32.555031] configfs-gadget gadget: init ncm | |
| [ 32.559380] configfs-gadget gadget: activate ncm | |
| [ 32.564051] usb1: qlen 10 | |
| [ 32.566687] configfs-gadget gadget: ncm_close | |
| [ 32.572806] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| [ 32.712786] configfs-gadget gadget: notify speed 425984000 | |
| [ 32.744795] configfs-gadget gadget: notify connect false | |
| [ 33.162939] usb0: eth_open | |
| [ 33.165708] usb0: eth_start | |
| [ 33.169106] configfs-gadget gadget: rndis_open | |
| [ 33.173595] rndis_set_param_medium: 0 4259840 | |
| [ 33.361401] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
| [ 33.368640] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 33.374500] PM: Cannot get wkup_m3_ipc handle | |
| [ 33.393791] random: crng init done | |
| [ 33.397436] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ 33.493003] configfs-gadget gadget: sending command-failure status | |
| [ 33.985848] usb1: eth_open | |
| [ 33.988760] usb1: eth_start | |
| [ 33.991703] configfs-gadget gadget: ncm_open | |
| [ 33.996007] configfs-gadget gadget: notify speed 425984000 | |
| [ 34.024782] configfs-gadget gadget: notify connect true | |
| [ 35.194683] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
| [ 35.250849] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
| [ 35.327440] omap-sham 53100000.sham: will run requests pump with realtime priority | |
| [ 35.386308] omap-aes 53500000.aes: will run requests pump with realtime priority | |
| [ 35.531896] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 35.537988] PM: Cannot get wkup_m3_ipc handle | |
| [ 35.576065] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 35.582139] PM: Cannot get wkup_m3_ipc handle | |
| [ 40.945612] gs_open: start ttyGS0 | |
| [ 40.949077] gs_open: ttyGS0 (2b0d42a3,752f1706) | |
| [ 40.987510] gs_close: ttyGS0 (2b0d42a3,752f1706) ... | |
| [ 40.992570] gs_close: ttyGS0 (2b0d42a3,752f1706) done! | |
| [ 41.017679] gs_open: start ttyGS0 | |
| [ 41.021063] gs_open: ttyGS0 (2b0d42a3,38706281) | |
| [ 41.026186] gs_close: ttyGS0 (2b0d42a3,38706281) ... | |
| [ 41.031197] gs_close: ttyGS0 (2b0d42a3,38706281) done! | |
| [ 41.120079] gs_open: start ttyGS0 | |
| [ 41.123464] gs_open: ttyGS0 (2b0d42a3,e0d0b10a) | |
| [ 41.147499] gs_close: ttyGS0 (2b0d42a3,e0d0b10a) ... | |
| [ 41.152557] gs_close: ttyGS0 (2b0d42a3,e0d0b10a) done! | |
| [ 41.177646] gs_open: start ttyGS0 | |
| [ 41.181030] gs_open: ttyGS0 (2b0d42a3,6e6b1add) | |
| beaglebone login: debian | |
| Password: | |
| Last login: Mon May 31 14:27:58 UTC 2021 from 192.168.6.1 on pts/0 | |
| The programs included with the Debian GNU/Linux system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
| permitted by applicable law. | |
| uname -a | |
| debian@beaglebone:~$ uname -a | |
| Linux beaglebone 5.13.0-rc2no-fix-omap2plus-r0 #6 SMP Mon May 31 09:04:40 PDT 2021 armv7l GNU/Linux | |
| debian@beaglebone:~$ [ 50.572744] configfs-gadget gadget: reset ncm | |
| [ 50.577180] usb1: gether_disconnect | |
| [ 50.580801] configfs-gadget gadget: notify speed 425984000 | |
| [ 50.643737] configfs-gadget gadget: reset config | |
| [ 50.648436] configfs-gadget gadget: rndis deactivated | |
| [ 50.653520] usb0: gether_disconnect | |
| [ 50.657161] configfs-gadget gadget: ncm deactivated | |
| [ 50.662075] configfs-gadget gadget: acm ttyGS0 deactivated | |
| [ 50.668058] configfs-gadget gadget: bulk_out_complete --> -104, 0/31 | |
| [ 50.674482] configfs-gadget gadget: reset interface | |
| [ 50.683911] gs_close: ttyGS0 (2b0d42a3,6e6b1add) ... | |
| [ 50.688956] gs_close: ttyGS0 (2b0d42a3,6e6b1add) done! | |
| [ 50.698847] gs_open: ttyGS0 (2b0d42a3,096d9207) | |
| [ 50.703536] gs_close: ttyGS0 (2b0d42a3,096d9207) ... | |
| [ 50.708534] gs_close: ttyGS0 (2b0d42a3,096d9207) done! | |
| [ 50.737450] gs_open: ttyGS0 (2b0d42a3,72f46c97) | |
| [ 50.742360] gs_close: ttyGS0 (2b0d42a3,72f46c97) ... | |
| [ 50.747368] gs_close: ttyGS0 (2b0d42a3,72f46c97) done! | |
| [ 50.865019] configfs-gadget gadget: high-speed config #1: c | |
| [ 50.870750] configfs-gadget gadget: init rndis | |
| [ 50.875220] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 50.881713] usb0: qlen 10 | |
| [ 50.884346] configfs-gadget gadget: rndis_open | |
| [ 50.888810] rndis_set_param_medium: 0 4259840 | |
| [ 50.893192] usb0: eth_start | |
| [ 50.896050] rndis_set_param_dev: | |
| [ 50.899318] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 50.909192] configfs-gadget gadget: delayed_status count 1 | |
| [ 50.914703] configfs-gadget gadget: reset ncm control 3 | |
| [ 50.919951] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 50.924858] configfs-gadget gadget: notify speed 425984000 | |
| [ 50.930384] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 50.935372] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 50.940628] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| [ 50.946998] configfs-gadget gadget: usb_composite_setup_continue | |
| [ 50.953083] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| [ 50.961758] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 50.968047] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 50.972430] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 50.978900] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 50.985153] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 50.991118] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 50.997678] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 51.003952] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 51.010278] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 51.016864] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 51.023150] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 51.030312] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 51.038863] configfs-gadget gadget: init ncm | |
| [ 51.043187] configfs-gadget gadget: activate ncm | |
| [ 51.047851] usb1: qlen 10 | |
| [ 51.050484] configfs-gadget gadget: ncm_open | |
| [ 51.054827] usb1: eth_start | |
| [ 51.058300] configfs-gadget gadget: reset ncm | |
| [ 51.062701] usb1: gether_disconnect | |
| [ 51.066426] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 51.072599] configfs-gadget gadget: non-CRC mode selected | |
| [ 51.078031] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 51.084081] configfs-gadget gadget: NCM16 selected | |
| [ 51.088904] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 51.112933] configfs-gadget gadget: init ncm | |
| [ 51.117273] configfs-gadget gadget: activate ncm | |
| [ 51.121940] usb1: qlen 10 | |
| [ 51.124575] configfs-gadget gadget: ncm_open | |
| [ 51.128870] usb1: eth_start | |
| [ 51.134108] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| [ 51.156593] configfs-gadget gadget: sending command-failure status | |
| [ 51.171976] gs_open: start ttyGS0 | |
| [ 51.175424] gs_open: ttyGS0 (614cfa93,5aae5b5c) | |
| [ 51.192345] gs_close: ttyGS0 (614cfa93,5aae5b5c) ... | |
| [ 51.197392] gs_close: ttyGS0 (614cfa93,5aae5b5c) done! | |
| [ 51.209316] configfs-gadget gadget: notify speed 425984000 | |
| [ 51.216734] gs_open: start ttyGS0 | |
| [ 51.220097] gs_open: ttyGS0 (efe422b8,8645b950) | |
| [ 51.241330] configfs-gadget gadget: notify connect true | |
| [ 51.250484] gs_close: ttyGS0 (efe422b8,8645b950) ... | |
| [ 51.255528] gs_close: ttyGS0 (efe422b8,8645b950) done! | |
| [ 51.312526] gs_open: start ttyGS0 | |
| [ 51.315907] gs_open: ttyGS0 (614cfa93,c27ec85b) | |
| [ 51.322470] gs_close: ttyGS0 (614cfa93,c27ec85b) ... | |
| [ 51.327510] gs_close: ttyGS0 (614cfa93,c27ec85b) done! | |
| [ 51.334796] gs_open: start ttyGS0 | |
| [ 51.338169] gs_open: ttyGS0 (614cfa93,6ff216da) | |
| [ 56.250809] configfs-gadget gadget: suspend | |
| [ 56.460718] configfs-gadget gadget: reset config | |
| [ 56.465412] configfs-gadget gadget: rndis deactivated | |
| [ 56.470490] usb0: gether_disconnect | |
| [ 56.474092] configfs-gadget gadget: ncm deactivated | |
| [ 56.478996] usb1: gether_disconnect | |
| [ 56.482539] configfs-gadget gadget: acm ttyGS0 deactivated | |
| [ 56.488864] configfs-gadget gadget: bulk_out_complete --> -104, 0/31 | |
| [ 56.495298] configfs-gadget gadget: reset interface | |
| [ 56.507270] gs_close: ttyGS0 (614cfa93,6ff216da) ... | |
| [ 56.512320] gs_close: ttyGS0 (614cfa93,6ff216da) done! | |
| [ 56.698581] configfs-gadget gadget: high-speed config #1: c | |
| [ 56.704269] configfs-gadget gadget: init rndis | |
| [ 56.708735] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 56.715226] usb0: qlen 10 | |
| [ 56.717860] configfs-gadget gadget: rndis_open | |
| [ 56.722324] rndis_set_param_medium: 0 4259840 | |
| [ 56.726709] usb0: eth_start | |
| [ 56.729568] rndis_set_param_dev: | |
| [ 56.732834] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 56.742709] configfs-gadget gadget: delayed_status count 1 | |
| [ 56.748219] configfs-gadget gadget: reset ncm control 3 | |
| [ 56.753469] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 56.758375] configfs-gadget gadget: notify speed 425984000 | |
| [ 56.763899] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 56.768888] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 56.774144] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| [ 56.782179] configfs-gadget gadget: usb_composite_setup_continue | |
| [ 56.788397] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| [ 56.797284] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 56.803553] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 56.807984] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.814503] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 56.820785] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 56.826797] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.833262] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 56.839548] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 56.845851] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.852332] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 56.858593] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 56.865670] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.874229] configfs-gadget gadget: init ncm | |
| [ 56.878543] configfs-gadget gadget: activate ncm | |
| [ 56.883204] usb1: qlen 10 | |
| [ 56.885838] configfs-gadget gadget: ncm_open | |
| [ 56.890140] usb1: eth_start | |
| [ 56.894083] configfs-gadget gadget: reset ncm | |
| [ 56.898500] usb1: gether_disconnect | |
| [ 56.902161] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 56.908294] configfs-gadget gadget: non-CRC mode selected | |
| [ 56.913724] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 56.919797] configfs-gadget gadget: NCM16 selected | |
| [ 56.924617] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 56.949380] configfs-gadget gadget: init ncm | |
| [ 56.953728] configfs-gadget gadget: activate ncm | |
| [ 56.958397] usb1: qlen 10 | |
| [ 56.961031] configfs-gadget gadget: ncm_open | |
| [ 56.965364] usb1: eth_start | |
| [ 56.970605] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| [ 57.071409] gs_open: start ttyGS0 | |
| [ 57.074850] gs_open: ttyGS0 (9c1f23cd,096d9207) | |
| [ 57.084495] gs_close: ttyGS0 (9c1f23cd,096d9207) ... | |
| [ 57.089537] gs_close: ttyGS0 (9c1f23cd,096d9207) done! | |
| [ 57.101045] gs_open: start ttyGS0 | |
| [ 57.104422] gs_open: ttyGS0 (9c1f23cd,2de113a6) | |
| [ 57.114246] gs_close: ttyGS0 (9c1f23cd,2de113a6) ... | |
| [ 57.119281] gs_close: ttyGS0 (9c1f23cd,2de113a6) done! | |
| [ 57.129525] configfs-gadget gadget: notify speed 425984000 | |
| [ 57.161546] configfs-gadget gadget: notify connect true | |
| [ 57.440806] gs_open: start ttyGS0 | |
| [ 57.444190] gs_open: ttyGS0 (2b0d42a3,83568b6e) | |
| [ 57.467442] gs_close: ttyGS0 (2b0d42a3,83568b6e) ... | |
| [ 57.472497] gs_close: ttyGS0 (2b0d42a3,83568b6e) done! | |
| [ 57.487686] gs_open: start ttyGS0 | |
| [ 57.491069] gs_open: ttyGS0 (2b0d42a3,3b4f5327) | |
| [ 57.508014] gs_close: ttyGS0 (2b0d42a3,3b4f5327) ... | |
| [ 57.513065] gs_close: ttyGS0 (2b0d42a3,3b4f5327) done! | |
| [ 57.554287] gs_open: start ttyGS0 | |
| [ 57.557668] gs_open: ttyGS0 (2b0d42a3,feb5e638) | |
| [ 57.570063] gs_close: ttyGS0 (2b0d42a3,feb5e638) ... | |
| [ 57.575122] gs_close: ttyGS0 (2b0d42a3,feb5e638) done! | |
| [ 57.585506] gs_open: start ttyGS0 | |
| [ 57.588889] gs_open: ttyGS0 (2b0d42a3,972e7fa0) | |
| [ 57.877842] configfs-gadget gadget: sending command-failure status | |
| debian@beaglebone:~$ | |
| debian@beaglebone:~$ | |
| debian@beaglebone:~$ dmesg -w | |
| [ 0.002030] pid_max: default: 32768 minimum: 301 | |
| [ 0.002159] LSM: Security Framework initializing | |
| [ 0.002260] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| [ 0.002282] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| [ 0.003322] CPU: Testing write buffer coherency: ok | |
| [ 0.003420] CPU0: Spectre v2: using BPIALL workaround | |
| [ 0.003764] CPU0: thread -1, cpu 0, socket -1, mpidr 0 | |
| [ 0.004577] Setting up static identity map for 0x80100000 - 0x80100078 | |
| [ 0.004789] rcu: Hierarchical SRCU implementation. | |
| [ 0.005844] smp: Bringing up secondary CPUs ... | |
| [ 0.005872] smp: Brought up 1 node, 1 CPU | |
| [ 0.005887] SMP: Total of 1 processors activated (398.13 BogoMIPS). | |
| [ 0.005900] CPU: All CPU(s) started in SVC mode. | |
| [ 0.006619] devtmpfs: initialized | |
| [ 0.019385] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
| [ 0.019699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.019735] futex hash table entries: 256 (order: 2, 16384 bytes, linear) | |
| [ 0.021332] pinctrl core: initialized pinctrl subsystem | |
| [ 0.021929] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT | |
| [ 0.023082] NET: Registered protocol family 16 | |
| [ 0.026659] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
| [ 0.027219] audit: initializing netlink subsys (disabled) | |
| [ 0.028216] thermal_sys: Registered thermal governor 'fair_share' | |
| [ 0.028236] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.028253] thermal_sys: Registered thermal governor 'user_space' | |
| [ 0.028617] cpuidle: using governor menu | |
| [ 0.041808] No ATAGs? | |
| [ 0.041846] hw-breakpoint: debug architecture 0x4 unsupported. | |
| [ 0.047831] Kprobes globally optimized | |
| [ 0.048113] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.052769] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) | |
| [ 0.052815] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup | |
| [ 0.052843] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' | |
| [ 0.052884] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' | |
| [ 0.052907] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup | |
| [ 0.052921] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found | |
| [ 0.054116] iommu: Default domain type: Translated | |
| [ 0.055436] SCSI subsystem initialized | |
| [ 0.055745] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.055760] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.055788] PTP clock support registered | |
| [ 0.057075] clocksource: Switched to clocksource dmtimer | |
| [ 0.089733] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.089858] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.119746] NET: Registered protocol family 2 | |
| [ 0.119992] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.120854] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | |
| [ 0.120908] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
| [ 0.120961] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.121026] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.121147] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | |
| [ 0.121178] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | |
| [ 0.121363] NET: Registered protocol family 1 | |
| [ 0.122737] Initialise system trusted keyrings | |
| [ 0.123621] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
| [ 0.124566] Key type asymmetric registered | |
| [ 0.124600] Asymmetric key parser 'x509' registered | |
| [ 0.124623] io scheduler mq-deadline registered | |
| [ 0.124636] io scheduler kyber registered | |
| [ 0.128077] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled | |
| [ 0.130194] serial8250 serial8250: no of_node; not parsing pinctrl DT | |
| [ 0.141509] brd: module loaded | |
| [ 0.150503] loop: module loaded | |
| [ 0.151275] mtdoops: mtd device (mtddev=name/number) must be supplied | |
| [ 0.152480] mdio_bus fixed-0: GPIO lookup for consumer reset | |
| [ 0.152508] mdio_bus fixed-0: using lookup tables for GPIO lookup | |
| [ 0.152522] mdio_bus fixed-0: No GPIO consumer reset found | |
| [ 0.152569] libphy: Fixed MDIO Bus: probed | |
| [ 0.153575] i2c /dev entries driver | |
| [ 0.154056] ti-cpufreq ti-cpufreq: no of_node; not parsing pinctrl DT | |
| [ 0.154396] cpuidle: enable-method property 'ti,am3352' found operations | |
| [ 0.154786] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.154802] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.154981] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.155195] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.155929] Initializing XFRM netlink socket | |
| [ 0.156114] NET: Registered protocol family 10 | |
| [ 0.157590] Segment Routing with IPv6 | |
| [ 0.157699] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 0.158460] NET: Registered protocol family 17 | |
| [ 0.158515] NET: Registered protocol family 15 | |
| [ 0.158565] Key type dns_resolver registered | |
| [ 0.158643] ThumbEE CPU extension supported. | |
| [ 0.158661] Registering SWP/SWPB emulation handler | |
| [ 0.159105] omap_voltage_late_init: Voltage driver support not added | |
| [ 0.159437] SmartReflex Class3 initialized | |
| [ 0.160119] Loading compiled-in X.509 certificates | |
| [ 0.187795] pinctrl-single 44e10800.pinmux: allocating 142 pins | |
| [ 0.187853] pinctrl-single 44e10800.pinmux: try to register 142 pins ... | |
| [ 0.187875] pinctrl core: registered pin 0 (PIN0) on pinctrl-single | |
| [ 0.187894] pinctrl core: registered pin 1 (PIN1) on pinctrl-single | |
| [ 0.187915] pinctrl core: registered pin 2 (PIN2) on pinctrl-single | |
| [ 0.187928] pinctrl core: registered pin 3 (PIN3) on pinctrl-single | |
| [ 0.187941] pinctrl core: registered pin 4 (PIN4) on pinctrl-single | |
| [ 0.187953] pinctrl core: registered pin 5 (PIN5) on pinctrl-single | |
| [ 0.187965] pinctrl core: registered pin 6 (PIN6) on pinctrl-single | |
| [ 0.187978] pinctrl core: registered pin 7 (PIN7) on pinctrl-single | |
| [ 0.187990] pinctrl core: registered pin 8 (PIN8) on pinctrl-single | |
| [ 0.188002] pinctrl core: registered pin 9 (PIN9) on pinctrl-single | |
| [ 0.188014] pinctrl core: registered pin 10 (PIN10) on pinctrl-single | |
| [ 0.188027] pinctrl core: registered pin 11 (PIN11) on pinctrl-single | |
| [ 0.188039] pinctrl core: registered pin 12 (PIN12) on pinctrl-single | |
| [ 0.188052] pinctrl core: registered pin 13 (PIN13) on pinctrl-single | |
| [ 0.188064] pinctrl core: registered pin 14 (PIN14) on pinctrl-single | |
| [ 0.188076] pinctrl core: registered pin 15 (PIN15) on pinctrl-single | |
| [ 0.188089] pinctrl core: registered pin 16 (PIN16) on pinctrl-single | |
| [ 0.188101] pinctrl core: registered pin 17 (PIN17) on pinctrl-single | |
| [ 0.188114] pinctrl core: registered pin 18 (PIN18) on pinctrl-single | |
| [ 0.188127] pinctrl core: registered pin 19 (PIN19) on pinctrl-single | |
| [ 0.188139] pinctrl core: registered pin 20 (PIN20) on pinctrl-single | |
| [ 0.188152] pinctrl core: registered pin 21 (PIN21) on pinctrl-single | |
| [ 0.188164] pinctrl core: registered pin 22 (PIN22) on pinctrl-single | |
| [ 0.188177] pinctrl core: registered pin 23 (PIN23) on pinctrl-single | |
| [ 0.188189] pinctrl core: registered pin 24 (PIN24) on pinctrl-single | |
| [ 0.188201] pinctrl core: registered pin 25 (PIN25) on pinctrl-single | |
| [ 0.188214] pinctrl core: registered pin 26 (PIN26) on pinctrl-single | |
| [ 0.188226] pinctrl core: registered pin 27 (PIN27) on pinctrl-single | |
| [ 0.188239] pinctrl core: registered pin 28 (PIN28) on pinctrl-single | |
| [ 0.188252] pinctrl core: registered pin 29 (PIN29) on pinctrl-single | |
| [ 0.188264] pinctrl core: registered pin 30 (PIN30) on pinctrl-single | |
| [ 0.188276] pinctrl core: registered pin 31 (PIN31) on pinctrl-single | |
| [ 0.188290] pinctrl core: registered pin 32 (PIN32) on pinctrl-single | |
| [ 0.188302] pinctrl core: registered pin 33 (PIN33) on pinctrl-single | |
| [ 0.188319] pinctrl core: registered pin 34 (PIN34) on pinctrl-single | |
| [ 0.188332] pinctrl core: registered pin 35 (PIN35) on pinctrl-single | |
| [ 0.188344] pinctrl core: registered pin 36 (PIN36) on pinctrl-single | |
| [ 0.188357] pinctrl core: registered pin 37 (PIN37) on pinctrl-single | |
| [ 0.188370] pinctrl core: registered pin 38 (PIN38) on pinctrl-single | |
| [ 0.188383] pinctrl core: registered pin 39 (PIN39) on pinctrl-single | |
| [ 0.188396] pinctrl core: registered pin 40 (PIN40) on pinctrl-single | |
| [ 0.188408] pinctrl core: registered pin 41 (PIN41) on pinctrl-single | |
| [ 0.188421] pinctrl core: registered pin 42 (PIN42) on pinctrl-single | |
| [ 0.188433] pinctrl core: registered pin 43 (PIN43) on pinctrl-single | |
| [ 0.188446] pinctrl core: registered pin 44 (PIN44) on pinctrl-single | |
| [ 0.188458] pinctrl core: registered pin 45 (PIN45) on pinctrl-single | |
| [ 0.188470] pinctrl core: registered pin 46 (PIN46) on pinctrl-single | |
| [ 0.188482] pinctrl core: registered pin 47 (PIN47) on pinctrl-single | |
| [ 0.188495] pinctrl core: registered pin 48 (PIN48) on pinctrl-single | |
| [ 0.188508] pinctrl core: registered pin 49 (PIN49) on pinctrl-single | |
| [ 0.188520] pinctrl core: registered pin 50 (PIN50) on pinctrl-single | |
| [ 0.188533] pinctrl core: registered pin 51 (PIN51) on pinctrl-single | |
| [ 0.188545] pinctrl core: registered pin 52 (PIN52) on pinctrl-single | |
| [ 0.188557] pinctrl core: registered pin 53 (PIN53) on pinctrl-single | |
| [ 0.188570] pinctrl core: registered pin 54 (PIN54) on pinctrl-single | |
| [ 0.188582] pinctrl core: registered pin 55 (PIN55) on pinctrl-single | |
| [ 0.188594] pinctrl core: registered pin 56 (PIN56) on pinctrl-single | |
| [ 0.188607] pinctrl core: registered pin 57 (PIN57) on pinctrl-single | |
| [ 0.188619] pinctrl core: registered pin 58 (PIN58) on pinctrl-single | |
| [ 0.188631] pinctrl core: registered pin 59 (PIN59) on pinctrl-single | |
| [ 0.188644] pinctrl core: registered pin 60 (PIN60) on pinctrl-single | |
| [ 0.188656] pinctrl core: registered pin 61 (PIN61) on pinctrl-single | |
| [ 0.188668] pinctrl core: registered pin 62 (PIN62) on pinctrl-single | |
| [ 0.188680] pinctrl core: registered pin 63 (PIN63) on pinctrl-single | |
| [ 0.188696] pinctrl core: registered pin 64 (PIN64) on pinctrl-single | |
| [ 0.188709] pinctrl core: registered pin 65 (PIN65) on pinctrl-single | |
| [ 0.188725] pinctrl core: registered pin 66 (PIN66) on pinctrl-single | |
| [ 0.188738] pinctrl core: registered pin 67 (PIN67) on pinctrl-single | |
| [ 0.188750] pinctrl core: registered pin 68 (PIN68) on pinctrl-single | |
| [ 0.188764] pinctrl core: registered pin 69 (PIN69) on pinctrl-single | |
| [ 0.188776] pinctrl core: registered pin 70 (PIN70) on pinctrl-single | |
| [ 0.188788] pinctrl core: registered pin 71 (PIN71) on pinctrl-single | |
| [ 0.188801] pinctrl core: registered pin 72 (PIN72) on pinctrl-single | |
| [ 0.188813] pinctrl core: registered pin 73 (PIN73) on pinctrl-single | |
| [ 0.188826] pinctrl core: registered pin 74 (PIN74) on pinctrl-single | |
| [ 0.188839] pinctrl core: registered pin 75 (PIN75) on pinctrl-single | |
| [ 0.188851] pinctrl core: registered pin 76 (PIN76) on pinctrl-single | |
| [ 0.188863] pinctrl core: registered pin 77 (PIN77) on pinctrl-single | |
| [ 0.188876] pinctrl core: registered pin 78 (PIN78) on pinctrl-single | |
| [ 0.188888] pinctrl core: registered pin 79 (PIN79) on pinctrl-single | |
| [ 0.188901] pinctrl core: registered pin 80 (PIN80) on pinctrl-single | |
| [ 0.188913] pinctrl core: registered pin 81 (PIN81) on pinctrl-single | |
| [ 0.188926] pinctrl core: registered pin 82 (PIN82) on pinctrl-single | |
| [ 0.188938] pinctrl core: registered pin 83 (PIN83) on pinctrl-single | |
| [ 0.188951] pinctrl core: registered pin 84 (PIN84) on pinctrl-single | |
| [ 0.188963] pinctrl core: registered pin 85 (PIN85) on pinctrl-single | |
| [ 0.188975] pinctrl core: registered pin 86 (PIN86) on pinctrl-single | |
| [ 0.188988] pinctrl core: registered pin 87 (PIN87) on pinctrl-single | |
| [ 0.189001] pinctrl core: registered pin 88 (PIN88) on pinctrl-single | |
| [ 0.189013] pinctrl core: registered pin 89 (PIN89) on pinctrl-single | |
| [ 0.189025] pinctrl core: registered pin 90 (PIN90) on pinctrl-single | |
| [ 0.189038] pinctrl core: registered pin 91 (PIN91) on pinctrl-single | |
| [ 0.189051] pinctrl core: registered pin 92 (PIN92) on pinctrl-single | |
| [ 0.189063] pinctrl core: registered pin 93 (PIN93) on pinctrl-single | |
| [ 0.189075] pinctrl core: registered pin 94 (PIN94) on pinctrl-single | |
| [ 0.189088] pinctrl core: registered pin 95 (PIN95) on pinctrl-single | |
| [ 0.189101] pinctrl core: registered pin 96 (PIN96) on pinctrl-single | |
| [ 0.189113] pinctrl core: registered pin 97 (PIN97) on pinctrl-single | |
| [ 0.189130] pinctrl core: registered pin 98 (PIN98) on pinctrl-single | |
| [ 0.189142] pinctrl core: registered pin 99 (PIN99) on pinctrl-single | |
| [ 0.189155] pinctrl core: registered pin 100 (PIN100) on pinctrl-single | |
| [ 0.189168] pinctrl core: registered pin 101 (PIN101) on pinctrl-single | |
| [ 0.189181] pinctrl core: registered pin 102 (PIN102) on pinctrl-single | |
| [ 0.189193] pinctrl core: registered pin 103 (PIN103) on pinctrl-single | |
| [ 0.189206] pinctrl core: registered pin 104 (PIN104) on pinctrl-single | |
| [ 0.189218] pinctrl core: registered pin 105 (PIN105) on pinctrl-single | |
| [ 0.189231] pinctrl core: registered pin 106 (PIN106) on pinctrl-single | |
| [ 0.189243] pinctrl core: registered pin 107 (PIN107) on pinctrl-single | |
| [ 0.189256] pinctrl core: registered pin 108 (PIN108) on pinctrl-single | |
| [ 0.189268] pinctrl core: registered pin 109 (PIN109) on pinctrl-single | |
| [ 0.189281] pinctrl core: registered pin 110 (PIN110) on pinctrl-single | |
| [ 0.189294] pinctrl core: registered pin 111 (PIN111) on pinctrl-single | |
| [ 0.189306] pinctrl core: registered pin 112 (PIN112) on pinctrl-single | |
| [ 0.189319] pinctrl core: registered pin 113 (PIN113) on pinctrl-single | |
| [ 0.189331] pinctrl core: registered pin 114 (PIN114) on pinctrl-single | |
| [ 0.189344] pinctrl core: registered pin 115 (PIN115) on pinctrl-single | |
| [ 0.189356] pinctrl core: registered pin 116 (PIN116) on pinctrl-single | |
| [ 0.189369] pinctrl core: registered pin 117 (PIN117) on pinctrl-single | |
| [ 0.189381] pinctrl core: registered pin 118 (PIN118) on pinctrl-single | |
| [ 0.189394] pinctrl core: registered pin 119 (PIN119) on pinctrl-single | |
| [ 0.189406] pinctrl core: registered pin 120 (PIN120) on pinctrl-single | |
| [ 0.189419] pinctrl core: registered pin 121 (PIN121) on pinctrl-single | |
| [ 0.189432] pinctrl core: registered pin 122 (PIN122) on pinctrl-single | |
| [ 0.189444] pinctrl core: registered pin 123 (PIN123) on pinctrl-single | |
| [ 0.189457] pinctrl core: registered pin 124 (PIN124) on pinctrl-single | |
| [ 0.189469] pinctrl core: registered pin 125 (PIN125) on pinctrl-single | |
| [ 0.189482] pinctrl core: registered pin 126 (PIN126) on pinctrl-single | |
| [ 0.189494] pinctrl core: registered pin 127 (PIN127) on pinctrl-single | |
| [ 0.189509] pinctrl core: registered pin 128 (PIN128) on pinctrl-single | |
| [ 0.189522] pinctrl core: registered pin 129 (PIN129) on pinctrl-single | |
| [ 0.189539] pinctrl core: registered pin 130 (PIN130) on pinctrl-single | |
| [ 0.189552] pinctrl core: registered pin 131 (PIN131) on pinctrl-single | |
| [ 0.189565] pinctrl core: registered pin 132 (PIN132) on pinctrl-single | |
| [ 0.189577] pinctrl core: registered pin 133 (PIN133) on pinctrl-single | |
| [ 0.189590] pinctrl core: registered pin 134 (PIN134) on pinctrl-single | |
| [ 0.189603] pinctrl core: registered pin 135 (PIN135) on pinctrl-single | |
| [ 0.189616] pinctrl core: registered pin 136 (PIN136) on pinctrl-single | |
| [ 0.189628] pinctrl core: registered pin 137 (PIN137) on pinctrl-single | |
| [ 0.189640] pinctrl core: registered pin 138 (PIN138) on pinctrl-single | |
| [ 0.189653] pinctrl core: registered pin 139 (PIN139) on pinctrl-single | |
| [ 0.189665] pinctrl core: registered pin 140 (PIN140) on pinctrl-single | |
| [ 0.189678] pinctrl core: registered pin 141 (PIN141) on pinctrl-single | |
| [ 0.189716] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
| [ 0.189746] pinctrl-single 44e10800.pinmux: pinmux_clkout2_pin index: 0x1b4 value: 0x3 | |
| [ 0.189779] pinctrl core: add 1 pinctrl maps | |
| [ 0.189805] pinctrl-single 44e10800.pinmux: found group selector 0 for pinmux_clkout2_pin | |
| [ 0.189825] pinctrl-single 44e10800.pinmux: request pin 109 (PIN109) for 44e10800.pinmux | |
| [ 0.189842] pinctrl-single 44e10800.pinmux: enabling pinmux_clkout2_pin function0 | |
| [ 0.189860] pinctrl-single 44e10800.pinmux: failed to lookup the sleep state | |
| [ 0.213429] gpio gpiochip0: (gpio-0-31): created GPIO range 0->7 ==> 44e10800.pinmux PIN 0->7 | |
| [ 0.213483] gpio gpiochip0: (gpio-0-31): created GPIO range 8->11 ==> 44e10800.pinmux PIN 90->93 | |
| [ 0.213503] gpio gpiochip0: (gpio-0-31): created GPIO range 12->27 ==> 44e10800.pinmux PIN 12->27 | |
| [ 0.213521] gpio gpiochip0: (gpio-0-31): created GPIO range 28->31 ==> 44e10800.pinmux PIN 30->33 | |
| [ 0.214659] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) | |
| [ 0.214817] gpio gpiochip0: registered GPIOs 0 to 31 on gpio-0-31 | |
| [ 0.214897] OMAP GPIO hardware version 0.1 | |
| [ 0.222850] pinctrl-single 44e10800.pinmux: pinmux_i2c2_pins index: 0x178 value: 0x33 | |
| [ 0.222902] pinctrl-single 44e10800.pinmux: pinmux_i2c2_pins index: 0x17c value: 0x33 | |
| [ 0.222935] pinctrl core: add 1 pinctrl maps | |
| [ 0.222965] pinctrl-single 44e10800.pinmux: found group selector 1 for pinmux_i2c2_pins | |
| [ 0.222987] pinctrl-single 44e10800.pinmux: request pin 94 (PIN94) for 4819c000.i2c | |
| [ 0.223002] pinctrl-single 44e10800.pinmux: request pin 95 (PIN95) for 4819c000.i2c | |
| [ 0.223017] pinctrl-single 44e10800.pinmux: enabling pinmux_i2c2_pins function1 | |
| [ 0.224680] i2c i2c-2: GPIO lookup for consumer scl | |
| [ 0.224716] i2c i2c-2: using device tree for GPIO lookup | |
| [ 0.224745] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224789] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224827] i2c i2c-2: using lookup tables for GPIO lookup | |
| [ 0.224841] i2c i2c-2: No GPIO consumer scl found | |
| [ 0.224859] i2c i2c-2: GPIO lookup for consumer sda | |
| [ 0.224869] i2c i2c-2: using device tree for GPIO lookup | |
| [ 0.224886] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224923] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0[0]' | |
| [ 0.224955] i2c i2c-2: using lookup tables for GPIO lookup | |
| [ 0.224966] i2c i2c-2: No GPIO consumer sda found | |
| [ 0.225580] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
| [ 0.230308] gpio gpiochip1: (gpio-32-63): created GPIO range 0->17 ==> 44e10800.pinmux PIN 34->51 | |
| [ 0.230358] gpio gpiochip1: (gpio-32-63): created GPIO range 18->21 ==> 44e10800.pinmux PIN 77->80 | |
| [ 0.230378] gpio gpiochip1: (gpio-32-63): created GPIO range 22->31 ==> 44e10800.pinmux PIN 56->65 | |
| [ 0.230862] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) | |
| [ 0.230999] gpio gpiochip1: registered GPIOs 32 to 63 on gpio-32-63 | |
| [ 0.232714] gpio gpiochip2: (gpio-64-95): created GPIO range 0->4 ==> 44e10800.pinmux PIN 66->70 | |
| [ 0.232753] gpio gpiochip2: (gpio-64-95): created GPIO range 5->6 ==> 44e10800.pinmux PIN 98->99 | |
| [ 0.232773] gpio gpiochip2: (gpio-64-95): created GPIO range 7->8 ==> 44e10800.pinmux PIN 75->76 | |
| [ 0.232791] gpio gpiochip2: (gpio-64-95): created GPIO range 13->13 ==> 44e10800.pinmux PIN 141->141 | |
| [ 0.232810] gpio gpiochip2: (gpio-64-95): created GPIO range 14->21 ==> 44e10800.pinmux PIN 100->107 | |
| [ 0.233212] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) | |
| [ 0.233321] gpio gpiochip2: registered GPIOs 64 to 95 on gpio-64-95 | |
| [ 0.246745] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x110 value: 0x30 | |
| [ 0.246798] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x114 value: 0x0 | |
| [ 0.246816] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x118 value: 0x30 | |
| [ 0.246833] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x11c value: 0x0 | |
| [ 0.246848] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x120 value: 0x0 | |
| [ 0.246864] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x124 value: 0x0 | |
| [ 0.246880] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x128 value: 0x0 | |
| [ 0.246896] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x12c value: 0x30 | |
| [ 0.246912] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x130 value: 0x30 | |
| [ 0.246927] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x134 value: 0x30 | |
| [ 0.246943] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x138 value: 0x30 | |
| [ 0.246958] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x13c value: 0x30 | |
| [ 0.246974] pinctrl-single 44e10800.pinmux: cpsw_default index: 0x140 value: 0x30 | |
| [ 0.247127] pinctrl core: add 1 pinctrl maps | |
| [ 0.247175] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x110 value: 0x27 | |
| [ 0.247196] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x114 value: 0x27 | |
| [ 0.247213] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x118 value: 0x27 | |
| [ 0.247228] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x11c value: 0x27 | |
| [ 0.247244] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x120 value: 0x27 | |
| [ 0.247259] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x124 value: 0x27 | |
| [ 0.247275] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x128 value: 0x27 | |
| [ 0.247290] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x12c value: 0x27 | |
| [ 0.247306] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x130 value: 0x27 | |
| [ 0.247321] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x134 value: 0x27 | |
| [ 0.247336] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x138 value: 0x27 | |
| [ 0.247352] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x13c value: 0x27 | |
| [ 0.247367] pinctrl-single 44e10800.pinmux: cpsw_sleep index: 0x140 value: 0x27 | |
| [ 0.247392] pinctrl core: add 1 pinctrl maps | |
| [ 0.247419] pinctrl-single 44e10800.pinmux: found group selector 2 for cpsw_default | |
| [ 0.247442] pinctrl-single 44e10800.pinmux: found group selector 3 for cpsw_sleep | |
| [ 0.247462] pinctrl-single 44e10800.pinmux: request pin 68 (PIN68) for 4a100000.ethernet | |
| [ 0.247477] pinctrl-single 44e10800.pinmux: request pin 69 (PIN69) for 4a100000.ethernet | |
| [ 0.247492] pinctrl-single 44e10800.pinmux: request pin 70 (PIN70) for 4a100000.ethernet | |
| [ 0.247505] pinctrl-single 44e10800.pinmux: request pin 71 (PIN71) for 4a100000.ethernet | |
| [ 0.247518] pinctrl-single 44e10800.pinmux: request pin 72 (PIN72) for 4a100000.ethernet | |
| [ 0.247531] pinctrl-single 44e10800.pinmux: request pin 73 (PIN73) for 4a100000.ethernet | |
| [ 0.247544] pinctrl-single 44e10800.pinmux: request pin 74 (PIN74) for 4a100000.ethernet | |
| [ 0.247557] pinctrl-single 44e10800.pinmux: request pin 75 (PIN75) for 4a100000.ethernet | |
| [ 0.247570] pinctrl-single 44e10800.pinmux: request pin 76 (PIN76) for 4a100000.ethernet | |
| [ 0.247583] pinctrl-single 44e10800.pinmux: request pin 77 (PIN77) for 4a100000.ethernet | |
| [ 0.247596] pinctrl-single 44e10800.pinmux: request pin 78 (PIN78) for 4a100000.ethernet | |
| [ 0.247609] pinctrl-single 44e10800.pinmux: request pin 79 (PIN79) for 4a100000.ethernet | |
| [ 0.247622] pinctrl-single 44e10800.pinmux: request pin 80 (PIN80) for 4a100000.ethernet | |
| [ 0.247638] pinctrl-single 44e10800.pinmux: enabling cpsw_default function2 | |
| [ 0.248478] pinctrl-single 44e10800.pinmux: davinci_mdio_default index: 0x148 value: 0x30 | |
| [ 0.248516] pinctrl-single 44e10800.pinmux: davinci_mdio_default index: 0x14c value: 0x10 | |
| [ 0.248542] pinctrl core: add 1 pinctrl maps | |
| [ 0.248567] pinctrl-single 44e10800.pinmux: davinci_mdio_sleep index: 0x148 value: 0x27 | |
| [ 0.248584] pinctrl-single 44e10800.pinmux: davinci_mdio_sleep index: 0x14c value: 0x27 | |
| [ 0.248604] pinctrl core: add 1 pinctrl maps | |
| [ 0.248628] pinctrl-single 44e10800.pinmux: found group selector 4 for davinci_mdio_default | |
| [ 0.248646] pinctrl-single 44e10800.pinmux: found group selector 5 for davinci_mdio_sleep | |
| [ 0.248665] pinctrl-single 44e10800.pinmux: request pin 82 (PIN82) for 4a101000.mdio | |
| [ 0.248679] pinctrl-single 44e10800.pinmux: request pin 83 (PIN83) for 4a101000.mdio | |
| [ 0.248694] pinctrl-single 44e10800.pinmux: enabling davinci_mdio_default function4 | |
| [ 0.249246] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset | |
| [ 0.249270] mdio_bus 4a101000.mdio: using device tree for GPIO lookup | |
| [ 0.249294] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' | |
| [ 0.249339] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' | |
| [ 0.249381] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup | |
| [ 0.249394] mdio_bus 4a101000.mdio: No GPIO consumer reset found | |
| [ 0.250043] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x80 value: 0x32 | |
| [ 0.250083] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x84 value: 0x32 | |
| [ 0.250100] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x0 value: 0x31 | |
| [ 0.250116] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x4 value: 0x31 | |
| [ 0.250132] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x8 value: 0x31 | |
| [ 0.250147] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0xc value: 0x31 | |
| [ 0.250162] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x10 value: 0x31 | |
| [ 0.250178] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x14 value: 0x31 | |
| [ 0.250193] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x18 value: 0x31 | |
| [ 0.250209] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x1c value: 0x31 | |
| [ 0.250237] pinctrl core: add 1 pinctrl maps | |
| [ 0.250265] pinctrl-single 44e10800.pinmux: found group selector 6 for pinmux_emmc_pins | |
| [ 0.250284] pinctrl-single 44e10800.pinmux: request pin 32 (PIN32) for 481d8000.mmc | |
| [ 0.250300] pinctrl-single 44e10800.pinmux: request pin 33 (PIN33) for 481d8000.mmc | |
| [ 0.250313] pinctrl-single 44e10800.pinmux: request pin 0 (PIN0) for 481d8000.mmc | |
| [ 0.250326] pinctrl-single 44e10800.pinmux: request pin 1 (PIN1) for 481d8000.mmc | |
| [ 0.250339] pinctrl-single 44e10800.pinmux: request pin 2 (PIN2) for 481d8000.mmc | |
| [ 0.250352] pinctrl-single 44e10800.pinmux: request pin 3 (PIN3) for 481d8000.mmc | |
| [ 0.250364] pinctrl-single 44e10800.pinmux: request pin 4 (PIN4) for 481d8000.mmc | |
| [ 0.250377] pinctrl-single 44e10800.pinmux: request pin 5 (PIN5) for 481d8000.mmc | |
| [ 0.250390] pinctrl-single 44e10800.pinmux: request pin 6 (PIN6) for 481d8000.mmc | |
| [ 0.250403] pinctrl-single 44e10800.pinmux: request pin 7 (PIN7) for 481d8000.mmc | |
| [ 0.250418] pinctrl-single 44e10800.pinmux: enabling pinmux_emmc_pins function6 | |
| [ 0.250718] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp | |
| [ 0.250741] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup | |
| [ 0.250762] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 0.250809] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 0.250844] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup | |
| [ 0.250857] sdhci-omap 481d8000.mmc: No GPIO consumer wp found | |
| [ 0.251029] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator | |
| [ 0.307043] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 | |
| [ 0.307097] libphy: 4a101000.mdio: probed | |
| [ 0.308419] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset | |
| [ 0.308458] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup | |
| [ 0.308485] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' | |
| [ 0.308548] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' | |
| [ 0.308594] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup | |
| [ 0.308607] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found | |
| [ 0.309336] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 | |
| [ 0.309629] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 | |
| [ 0.309653] cpsw 4a100000.ethernet: ALE Table size 1024 | |
| [ 0.309768] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) | |
| [ 0.309855] cpsw 4a100000.ethernet: Detected MACID = 1c:ba:8c:9b:be:b4 | |
| [ 0.318439] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! | |
| [ 0.318494] edma 49000000.dma: TI EDMA DMA engine driver | |
| [ 0.334021] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
| [ 0.334442] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 0.334768] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 0.335025] gpio-clk clk_mcasp0: GPIO lookup for consumer enable | |
| [ 0.335048] gpio-clk clk_mcasp0: using device tree for GPIO lookup | |
| [ 0.335087] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/clk_mcasp0[0]' - status (0) | |
| [ 0.335200] gpio gpiochip0: Persistence not supported for GPIO 27 | |
| [ 0.335925] gpio-mux mux-controller: GPIO lookup for consumer mux | |
| [ 0.335951] gpio-mux mux-controller: using device tree for GPIO lookup | |
| [ 0.335982] of_get_named_gpiod_flags: parsed 'mux-gpios' property of node '/mux-controller[0]' - status (0) | |
| [ 0.336076] gpio gpiochip1: Persistence not supported for GPIO 2 | |
| [ 0.336095] gpio-mux mux-controller: GPIO lookup for consumer mux | |
| [ 0.336108] gpio-mux mux-controller: using device tree for GPIO lookup | |
| [ 0.336133] of_get_named_gpiod_flags: parsed 'mux-gpios' property of node '/mux-controller[1]' - status (0) | |
| [ 0.336161] gpio gpiochip1: Persistence not supported for GPIO 3 | |
| [ 0.336299] gpio-mux mux-controller: 4-way mux-controller registered | |
| [ 0.336655] gpio gpiochip3: (gpio-96-127): created GPIO range 0->7 ==> 44e10800.pinmux PIN 82->89 | |
| [ 0.336684] gpio gpiochip3: (gpio-96-127): created GPIO range 8->11 ==> 44e10800.pinmux PIN 52->55 | |
| [ 0.336703] gpio gpiochip3: (gpio-96-127): created GPIO range 12->15 ==> 44e10800.pinmux PIN 94->97 | |
| [ 0.336722] gpio gpiochip3: (gpio-96-127): created GPIO range 16->17 ==> 44e10800.pinmux PIN 71->72 | |
| [ 0.336740] gpio gpiochip3: (gpio-96-127): created GPIO range 18->18 ==> 44e10800.pinmux PIN 135->135 | |
| [ 0.336759] gpio gpiochip3: (gpio-96-127): created GPIO range 19->20 ==> 44e10800.pinmux PIN 108->109 | |
| [ 0.336781] gpio gpiochip3: (gpio-96-127): created GPIO range 21->21 ==> 44e10800.pinmux PIN 73->73 | |
| [ 0.336801] gpio gpiochip3: (gpio-96-127): created GPIO range 22->23 ==> 44e10800.pinmux PIN 8->9 | |
| [ 0.336820] gpio gpiochip3: (gpio-96-127): created GPIO range 26->27 ==> 44e10800.pinmux PIN 10->11 | |
| [ 0.336839] gpio gpiochip3: (gpio-96-127): created GPIO range 28->28 ==> 44e10800.pinmux PIN 74->74 | |
| [ 0.336869] gpio gpiochip3: (gpio-96-127): created GPIO range 29->29 ==> 44e10800.pinmux PIN 81->81 | |
| [ 0.336890] gpio gpiochip3: (gpio-96-127): created GPIO range 30->31 ==> 44e10800.pinmux PIN 28->29 | |
| [ 0.342313] l3-aon-clkctrl:0000:0: failed to disable | |
| [ 0.342591] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3) | |
| [ 0.342714] gpio gpiochip3: registered GPIOs 96 to 127 on gpio-96-127 | |
| [ 0.343199] pinctrl-single 44e10800.pinmux: pinmux_uart0_pins index: 0x170 value: 0x30 | |
| [ 0.343229] pinctrl-single 44e10800.pinmux: pinmux_uart0_pins index: 0x174 value: 0x0 | |
| [ 0.343265] pinctrl core: add 1 pinctrl maps | |
| [ 0.343299] pinctrl-single 44e10800.pinmux: found group selector 7 for pinmux_uart0_pins | |
| [ 0.343321] pinctrl-single 44e10800.pinmux: request pin 92 (PIN92) for 44e09000.serial | |
| [ 0.343336] pinctrl-single 44e10800.pinmux: request pin 93 (PIN93) for 44e09000.serial | |
| [ 0.343351] pinctrl-single 44e10800.pinmux: enabling pinmux_uart0_pins function7 | |
| [ 0.344158] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term | |
| [ 0.344190] omap8250 44e09000.serial: using device tree for GPIO lookup | |
| [ 0.344214] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' | |
| [ 0.344261] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' | |
| [ 0.344301] omap8250 44e09000.serial: using lookup tables for GPIO lookup | |
| [ 0.344314] omap8250 44e09000.serial: No GPIO consumer rs485-term found | |
| [ 0.344364] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 18, base_baud = 3000000) is a 8250 | |
| [ 2.492865] random: fast init done | |
| [ 3.596172] printk: console [ttyS0] enabled | |
| [ 3.601317] pinctrl-single 44e10800.pinmux: pinmux_i2c0_pins index: 0x188 value: 0x30 | |
| [ 3.609315] pinctrl-single 44e10800.pinmux: pinmux_i2c0_pins index: 0x18c value: 0x30 | |
| [ 3.617254] pinctrl core: add 1 pinctrl maps | |
| [ 3.621572] pinctrl-single 44e10800.pinmux: found group selector 8 for pinmux_i2c0_pins | |
| [ 3.629648] pinctrl-single 44e10800.pinmux: request pin 98 (PIN98) for 44e0b000.i2c | |
| [ 3.637365] pinctrl-single 44e10800.pinmux: request pin 99 (PIN99) for 44e0b000.i2c | |
| [ 3.645061] pinctrl-single 44e10800.pinmux: enabling pinmux_i2c0_pins function8 | |
| [ 3.653576] i2c i2c-0: GPIO lookup for consumer scl | |
| [ 3.658593] i2c i2c-0: using device tree for GPIO lookup | |
| [ 3.663951] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.677554] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.691051] i2c i2c-0: using lookup tables for GPIO lookup | |
| [ 3.696566] i2c i2c-0: No GPIO consumer scl found | |
| [ 3.701317] i2c i2c-0: GPIO lookup for consumer sda | |
| [ 3.706217] i2c i2c-0: using device tree for GPIO lookup | |
| [ 3.711576] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.725154] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0[0]' | |
| [ 3.738641] i2c i2c-0: using lookup tables for GPIO lookup | |
| [ 3.744153] i2c i2c-0: No GPIO consumer sda found | |
| [ 3.777764] tps65217-pmic: Failed to locate of_node [id: -1] | |
| [ 3.783646] tps65217-pmic tps65217-pmic: no of_node; not parsing pinctrl DT | |
| [ 3.799906] tps65217-bl: Failed to locate of_node [id: -1] | |
| [ 3.808415] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
| [ 3.814382] i2c 0-0070: Fixing up cyclic dependency with 4830e000.lcdc | |
| [ 3.821324] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
| [ 3.827963] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 3.828012] gpio-mux-input key-mux1: GPIO lookup for consumer pin | |
| [ 3.838757] gpio-mux-input key-mux1: using device tree for GPIO lookup | |
| [ 3.845346] of_get_named_gpiod_flags: parsed 'pin-gpios' property of node '/key-mux1[0]' - status (0) | |
| [ 3.854666] gpio gpiochip1: Persistence not supported for GPIO 5 | |
| [ 3.860757] gpiochip_find_base: found new base at 508 | |
| [ 3.865848] DEBUG gpio_mux_input_get_value(): offset=0, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.865857] DEBUG gpio_mux_input_get_value(): offset=1, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.873916] DEBUG gpio_mux_input_get_value(): offset=2, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.881971] DEBUG gpio_mux_input_get_value(): offset=3, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 3.890569] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0x160 value: 0x2f | |
| [ 3.906555] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xfc value: 0x30 | |
| [ 3.914387] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xf8 value: 0x30 | |
| [ 3.922192] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xf4 value: 0x30 | |
| [ 3.929994] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0xf0 value: 0x30 | |
| [ 3.937795] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0x104 value: 0x30 | |
| [ 3.945666] pinctrl-single 44e10800.pinmux: pinmux_mmc1_pins index: 0x100 value: 0x30 | |
| [ 3.953572] pinctrl core: add 1 pinctrl maps | |
| [ 3.957908] pinctrl-single 44e10800.pinmux: found group selector 9 for pinmux_mmc1_pins | |
| [ 3.965958] pinctrl-single 44e10800.pinmux: request pin 88 (PIN88) for 48060000.mmc | |
| [ 3.973675] pinctrl-single 44e10800.pinmux: request pin 63 (PIN63) for 48060000.mmc | |
| [ 3.981387] pinctrl-single 44e10800.pinmux: request pin 62 (PIN62) for 48060000.mmc | |
| [ 3.989096] pinctrl-single 44e10800.pinmux: request pin 61 (PIN61) for 48060000.mmc | |
| [ 3.996791] pinctrl-single 44e10800.pinmux: request pin 60 (PIN60) for 48060000.mmc | |
| [ 4.004498] pinctrl-single 44e10800.pinmux: request pin 65 (PIN65) for 48060000.mmc | |
| [ 4.012210] pinctrl-single 44e10800.pinmux: request pin 64 (PIN64) for 48060000.mmc | |
| [ 4.019921] pinctrl-single 44e10800.pinmux: enabling pinmux_mmc1_pins function9 | |
| [ 4.027583] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd | |
| [ 4.033627] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
| [ 4.040252] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' - status (0) | |
| [ 4.054173] gpio gpiochip3: Persistence not supported for GPIO 6 | |
| [ 4.060248] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
| [ 4.069017] sdhci-omap 48060000.mmc: Got CD GPIO | |
| [ 4.073659] sdhci-omap 48060000.mmc: GPIO lookup for consumer wp | |
| [ 4.079710] sdhci-omap 48060000.mmc: using device tree for GPIO lookup | |
| [ 4.086276] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
| [ 4.099434] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
| [ 4.112491] sdhci-omap 48060000.mmc: using lookup tables for GPIO lookup | |
| [ 4.119245] sdhci-omap 48060000.mmc: No GPIO consumer wp found | |
| [ 4.125280] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator | |
| [ 4.134047] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x80 value: 0x32 | |
| [ 4.141943] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x84 value: 0x32 | |
| [ 4.149754] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x0 value: 0x31 | |
| [ 4.157497] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x4 value: 0x31 | |
| [ 4.165197] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x8 value: 0x31 | |
| [ 4.172911] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0xc value: 0x31 | |
| [ 4.180623] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x10 value: 0x31 | |
| [ 4.188423] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x14 value: 0x31 | |
| [ 4.196207] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x18 value: 0x31 | |
| [ 4.204005] pinctrl-single 44e10800.pinmux: pinmux_emmc_pins index: 0x1c value: 0x31 | |
| [ 4.211820] pinctrl core: add 1 pinctrl maps | |
| [ 4.216134] pinctrl-single 44e10800.pinmux: found group selector 6 for pinmux_emmc_pins | |
| [ 4.224206] pinctrl-single 44e10800.pinmux: request pin 32 (PIN32) for 481d8000.mmc | |
| [ 4.231920] pinctrl-single 44e10800.pinmux: request pin 33 (PIN33) for 481d8000.mmc | |
| [ 4.239631] pinctrl-single 44e10800.pinmux: request pin 0 (PIN0) for 481d8000.mmc | |
| [ 4.247165] pinctrl-single 44e10800.pinmux: request pin 1 (PIN1) for 481d8000.mmc | |
| [ 4.254684] pinctrl-single 44e10800.pinmux: request pin 2 (PIN2) for 481d8000.mmc | |
| [ 4.262217] pinctrl-single 44e10800.pinmux: request pin 3 (PIN3) for 481d8000.mmc | |
| [ 4.269752] pinctrl-single 44e10800.pinmux: request pin 4 (PIN4) for 481d8000.mmc | |
| [ 4.277285] pinctrl-single 44e10800.pinmux: request pin 5 (PIN5) for 481d8000.mmc | |
| [ 4.284804] pinctrl-single 44e10800.pinmux: request pin 6 (PIN6) for 481d8000.mmc | |
| [ 4.292337] pinctrl-single 44e10800.pinmux: request pin 7 (PIN7) for 481d8000.mmc | |
| [ 4.299872] pinctrl-single 44e10800.pinmux: enabling pinmux_emmc_pins function6 | |
| [ 4.307531] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp | |
| [ 4.313575] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup | |
| [ 4.320192] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 4.333790] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' | |
| [ 4.347284] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup | |
| [ 4.354021] sdhci-omap 481d8000.mmc: No GPIO consumer wp found | |
| [ 4.360160] gpio gpiochip4: (key-mux1): added GPIO chardev (254:4) | |
| [ 4.366498] gpio gpiochip4: registered GPIOs 508 to 511 on key-mux1 | |
| [ 4.372855] gpio-mux-input key-mux1: registered 4 input GPIOs | |
| [ 4.378648] DEBUG gpio_mux_input_probe(): return 0 | |
| [ 4.378944] DEBUG gpio_mux_input_probe(): ENTER | |
| [ 4.383784] gpio-mux-input key-mux2: GPIO lookup for consumer pin | |
| [ 4.394495] gpio-mux-input key-mux2: using device tree for GPIO lookup | |
| [ 4.401107] of_get_named_gpiod_flags: parsed 'pin-gpios' property of node '/key-mux2[0]' - status (0) | |
| [ 4.410423] gpio gpiochip1: Persistence not supported for GPIO 4 | |
| [ 4.416485] gpiochip_find_base: found new base at 504 | |
| [ 4.421599] DEBUG gpio_mux_input_get_value(): offset=0, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.421609] DEBUG gpio_mux_input_get_value(): offset=1, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.429665] DEBUG gpio_mux_input_get_value(): offset=2, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.437719] DEBUG gpio_mux_input_get_value(): offset=3, return GPIO_LINE_DIRECTION_IN=1 | |
| [ 4.446045] gpio gpiochip5: (key-mux2): added GPIO chardev (254:5) | |
| [ 4.460445] gpio gpiochip5: registered GPIOs 504 to 507 on key-mux2 | |
| [ 4.466749] gpio-mux-input key-mux2: registered 4 input GPIOs | |
| [ 4.472545] DEBUG gpio_mux_input_probe(): return 0 | |
| [ 4.476250] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator | |
| [ 4.516065] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA | |
| [ 4.524336] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA | |
| [ 4.532726] Waiting for root device /dev/mmcblk0p1... | |
| [ 4.600113] mmc0: new high speed SDHC card at address aaaa | |
| [ 4.605912] mmcblk mmc0:aaaa: no of_node; not parsing pinctrl DT | |
| [ 4.612847] mmcblk0: mmc0:aaaa SL08G 7.40 GiB | |
| [ 4.619794] mmcblk0: p1 | |
| [ 4.626356] mmc1: new high speed MMC card at address 0001 | |
| [ 4.632124] mmcblk mmc1:0001: no of_node; not parsing pinctrl DT | |
| [ 4.638977] mmcblk1: mmc1:0001 MMC04G 3.66 GiB | |
| [ 4.643907] mmcblk1boot0: mmc1:0001 MMC04G 1.00 MiB | |
| [ 4.649307] mmcblk1boot1: mmc1:0001 MMC04G 1.00 MiB | |
| [ 4.654658] mmcblk1rpmb: mmc1:0001 MMC04G 128 KiB, chardev (249:0) | |
| [ 4.678630] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. | |
| [ 4.688664] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. | |
| [ 4.696860] devtmpfs: mounted | |
| [ 4.701547] Freeing unused kernel memory: 1024K | |
| [ 4.706570] Run /sbin/init as init process | |
| [ 4.710732] with arguments: | |
| [ 4.713718] /sbin/init | |
| [ 4.716435] with environment: | |
| [ 4.719606] HOME=/ | |
| [ 4.721976] TERM=linux | |
| [ 5.249325] systemd[1]: System time before build time, advancing clock. | |
| [ 5.322379] systemd[1]: Inserted module 'autofs4' | |
| [ 5.377655] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 5.399934] systemd[1]: Detected architecture arm. | |
| [ 5.417598] systemd[1]: Set hostname to <beaglebone>. | |
| [ 6.325058] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
| [ 6.342640] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
| [ 6.741926] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.763237] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.771046] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ 6.779333] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.790329] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ 6.797644] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ 6.805574] systemd[1]: Listening on Journal Audit Socket. | |
| [ 6.812218] systemd[1]: Listening on udev Kernel Socket. | |
| [ 7.917629] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro. Quota mode: none. | |
| [ 9.876079] systemd-journald[83]: Received request to flush runtime journal from PID 1 | |
| [ 10.031347] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT | |
| [ 11.067216] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x54 value: 0x7 | |
| [ 11.074622] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x58 value: 0x17 | |
| [ 11.082126] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x5c value: 0x7 | |
| [ 11.089504] pinctrl-single 44e10800.pinmux: user_leds_s0 index: 0x60 value: 0x17 | |
| [ 11.096968] pinctrl core: add 1 pinctrl maps | |
| [ 11.101312] pinctrl-single 44e10800.pinmux: found group selector 10 for user_leds_s0 | |
| [ 11.109128] pinctrl-single 44e10800.pinmux: request pin 21 (PIN21) for leds | |
| [ 11.116128] pinctrl-single 44e10800.pinmux: request pin 22 (PIN22) for leds | |
| [ 11.123146] pinctrl-single 44e10800.pinmux: request pin 23 (PIN23) for leds | |
| [ 11.130172] pinctrl-single 44e10800.pinmux: request pin 24 (PIN24) for leds | |
| [ 11.137191] pinctrl-single 44e10800.pinmux: enabling user_leds_s0 function10 | |
| [ 11.144381] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led2[0]' - status (0) | |
| [ 11.153457] gpio gpiochip0: Persistence not supported for GPIO 21 | |
| [ 11.159603] gpio-21 (?): no flags found for gpios | |
| [ 11.164581] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led3[0]' - status (0) | |
| [ 11.173661] gpio gpiochip0: Persistence not supported for GPIO 22 | |
| [ 11.179806] gpio-22 (?): no flags found for gpios | |
| [ 11.184705] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led4[0]' - status (0) | |
| [ 11.193767] gpio gpiochip0: Persistence not supported for GPIO 23 | |
| [ 11.199908] gpio-23 (?): no flags found for gpios | |
| [ 11.204781] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led5[0]' - status (0) | |
| [ 11.213848] gpio gpiochip0: Persistence not supported for GPIO 24 | |
| [ 11.219992] gpio-24 (?): no flags found for gpios | |
| [ 12.739975] omap_rtc 44e3e000.rtc: already running | |
| [ 12.745247] omap_rtc 44e3e000.rtc: try to register 4 pins ... | |
| [ 12.751221] pinctrl core: registered pin 0 (ext_wakeup0) on 44e3e000.rtc | |
| [ 12.758009] pinctrl core: registered pin 1 (ext_wakeup1) on 44e3e000.rtc | |
| [ 12.764747] pinctrl core: registered pin 2 (ext_wakeup2) on 44e3e000.rtc | |
| [ 12.771504] pinctrl core: registered pin 3 (ext_wakeup3) on 44e3e000.rtc | |
| [ 12.778271] omap_rtc 44e3e000.rtc: no hogs found | |
| [ 13.257953] alarmtimer alarmtimer.0.auto: no of_node; not parsing pinctrl DT | |
| [ 13.265402] omap_rtc 44e3e000.rtc: registered as rtc0 | |
| [ 13.270692] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T01:37:29 UTC (946690649) | |
| [ 13.279409] omap_rtc 44e3e000.rtc: GPIO lookup for consumer wp | |
| [ 13.285273] omap_rtc 44e3e000.rtc: using device tree for GPIO lookup | |
| [ 13.291702] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
| [ 13.305308] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
| [ 13.318811] omap_rtc 44e3e000.rtc: using lookup tables for GPIO lookup | |
| [ 13.325373] omap_rtc 44e3e000.rtc: No GPIO consumer wp found | |
| [ 14.020420] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 14.026298] PM: Cannot get wkup_m3_ipc handle | |
| [ 17.073224] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 17.079266] PM: Cannot get wkup_m3_ipc handle | |
| [ 17.249423] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset | |
| [ 17.256726] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
| [ 17.264453] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.275985] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.287392] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
| [ 17.295088] am335x-phy-driver 47401300.usb-phy: No GPIO consumer reset found | |
| [ 17.302194] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect | |
| [ 17.309996] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
| [ 17.317542] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.329550] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
| [ 17.341465] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
| [ 17.349177] am335x-phy-driver 47401300.usb-phy: No GPIO consumer vbus-detect found | |
| [ 17.356891] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator | |
| [ 17.391249] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 17.397353] PM: Cannot get wkup_m3_ipc handle | |
| [ 17.678987] usbcore: registered new interface driver usbfs | |
| [ 17.684603] usbcore: registered new interface driver hub | |
| [ 17.690218] usbcore: registered new device driver usb | |
| [ 19.208704] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset | |
| [ 19.216008] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
| [ 19.223708] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.235242] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.246649] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
| [ 19.254367] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer reset found | |
| [ 19.261468] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect | |
| [ 19.269267] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
| [ 19.276791] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.288797] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
| [ 19.300710] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
| [ 19.308422] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer vbus-detect found | |
| [ 19.316138] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator | |
| [ 19.325734] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 19.331682] PM: Cannot get wkup_m3_ipc handle | |
| [ 19.528149] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 19.534026] PM: Cannot get wkup_m3_ipc handle | |
| [ 21.457464] remoteproc remoteproc0: wkup_m3 is available | |
| [ 21.464684] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 21.470704] PM: Cannot get wkup_m3_ipc handle | |
| [ 21.937434] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
| [ 21.942841] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
| [ 22.336954] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 | |
| [ 22.345485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 22.352812] usb usb1: Product: MUSB HDRC host driver | |
| [ 22.357828] usb usb1: Manufacturer: Linux 5.13.0-rc2no-fix-omap2plus-r0 musb-hcd | |
| [ 22.365261] usb usb1: SerialNumber: musb-hdrc.1 | |
| [ 23.287600] hub 1-0:1.0: USB hub found | |
| [ 23.377859] hub 1-0:1.0: 1 port detected | |
| [ 23.507923] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 23.513797] PM: Cannot get wkup_m3_ipc handle | |
| [ 23.805401] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) | |
| [ 24.159280] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) | |
| [ 26.821476] at24 2-0054: supply vcc not found, using dummy regulator | |
| [ 26.828533] at24 2-0054: GPIO lookup for consumer wp | |
| [ 26.833541] at24 2-0054: using device tree for GPIO lookup | |
| [ 26.839179] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom0@54[0]' | |
| [ 26.854193] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom0@54[0]' | |
| [ 26.869097] at24 2-0054: using lookup tables for GPIO lookup | |
| [ 26.874788] at24 2-0054: No GPIO consumer wp found | |
| [ 27.962795] at24 2-0055: supply vcc not found, using dummy regulator | |
| [ 27.969666] at24 2-0055: GPIO lookup for consumer wp | |
| [ 27.974672] at24 2-0055: using device tree for GPIO lookup | |
| [ 27.980295] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom1@55[0]' | |
| [ 27.995301] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom1@55[0]' | |
| [ 28.010204] at24 2-0055: using lookup tables for GPIO lookup | |
| [ 28.015892] at24 2-0055: No GPIO consumer wp found | |
| [ 28.539654] using random self ethernet address | |
| [ 28.544162] using random host ethernet address | |
| [ 28.778240] rndis_register: configNr = 0 | |
| [ 28.938186] at24 2-0056: supply vcc not found, using dummy regulator | |
| [ 28.944921] at24 2-0056: GPIO lookup for consumer wp | |
| [ 28.950102] at24 2-0056: using device tree for GPIO lookup | |
| [ 28.955637] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom2@56[0]' | |
| [ 28.970651] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom2@56[0]' | |
| [ 28.985552] at24 2-0056: using lookup tables for GPIO lookup | |
| [ 28.991259] at24 2-0056: No GPIO consumer wp found | |
| [ 29.156616] Mass Storage Function, version: 2009/09/11 | |
| [ 29.162001] LUN: removable file: (no medium) | |
| [ 29.196588] mass_storage.usb0/lun.0: read-only status set to 1 | |
| [ 29.277523] mass_storage.usb0/lun.0: open backing file: /var/cache/doc-beaglebone-getting-started/beaglebone-getting-started-2019-10-31.img | |
| [ 30.051880] at24 2-0057: supply vcc not found, using dummy regulator | |
| [ 30.058812] at24 2-0057: GPIO lookup for consumer wp | |
| [ 30.063818] at24 2-0057: using device tree for GPIO lookup | |
| [ 30.069433] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom3@57[0]' | |
| [ 30.084453] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@9c000/i2c@0/cape_eeprom3@57[0]' | |
| [ 30.099357] at24 2-0057: using lookup tables for GPIO lookup | |
| [ 30.105045] at24 2-0057: No GPIO consumer wp found | |
| [ 30.413830] using random self ethernet address | |
| [ 30.418509] using random host ethernet address | |
| [ 30.649529] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
| [ 30.687693] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 30.693583] PM: Cannot get wkup_m3_ipc handle | |
| [ 30.700877] remoteproc remoteproc0: powering up wkup_m3 | |
| [ 30.740147] userial_init: registered 8 ttyGS* devices | |
| [ 30.758943] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 | |
| [ 30.768650] remoteproc remoteproc0: request_firmware failed: -2 | |
| [ 30.774610] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed | |
| [ 30.872960] udc musb-hdrc.0: registering UDC driver [g_multi] | |
| [ 30.878961] configfs-gadget gadget: adding 'rndis'/(ptrval) to config 'c'/(ptrval) | |
| [ 30.887621] usb0: HOST MAC 1c:ba:8c:a2:ed:6b | |
| [ 30.892028] usb0: MAC 1c:ba:8c:a2:ed:6a | |
| [ 30.895910] rndis_set_param_medium: 0 0 | |
| [ 30.899837] configfs-gadget gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in | |
| [ 30.907829] configfs-gadget gadget: adding 'Mass Storage Function'/(ptrval) to config 'c'/(ptrval) | |
| [ 31.161308] at24 0-0050: supply vcc not found, using dummy regulator | |
| [ 31.168202] at24 0-0050: GPIO lookup for consumer wp | |
| [ 31.173211] at24 0-0050: using device tree for GPIO lookup | |
| [ 31.178834] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/baseboard_eeprom@50[0]' | |
| [ 31.194105] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/baseboard_eeprom@50[0]' | |
| [ 31.209285] at24 0-0050: using lookup tables for GPIO lookup | |
| [ 31.214974] at24 0-0050: No GPIO consumer wp found | |
| [ 31.647528] configfs-gadget gadget: I/O thread pid: 771 | |
| [ 31.652869] configfs-gadget gadget: adding 'cdc_network'/(ptrval) to config 'c'/(ptrval) | |
| [ 31.662096] usb1: HOST MAC 1c:ba:8c:a2:ed:6d | |
| [ 31.666501] usb1: MAC 1c:ba:8c:a2:ed:6e | |
| [ 31.670475] configfs-gadget gadget: CDC Network: dual speed IN/ep4in OUT/ep3out NOTIFY/ep5in | |
| [ 31.678993] configfs-gadget gadget: adding 'acm'/(ptrval) to config 'c'/(ptrval) | |
| [ 31.686442] configfs-gadget gadget: acm ttyGS0: dual speed IN/ep6in OUT/ep4out NOTIFY/ep7in | |
| [ 32.047619] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
| [ 32.056571] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 32.062587] PM: Cannot get wkup_m3_ipc handle | |
| [ 32.311126] configfs-gadget gadget: high-speed config #1: c | |
| [ 32.316856] configfs-gadget gadget: init rndis | |
| [ 32.321324] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 32.327824] usb0: qlen 10 | |
| [ 32.330461] configfs-gadget gadget: rndis_close | |
| [ 32.335013] rndis_set_param_medium: 0 0 | |
| [ 32.338878] rndis_set_param_dev: | |
| [ 32.342143] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 32.352019] configfs-gadget gadget: delayed_status count 1 | |
| [ 32.357530] configfs-gadget gadget: reset ncm control 3 | |
| [ 32.362778] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 32.367684] configfs-gadget gadget: notify speed 425984000 | |
| [ 32.373221] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 32.378210] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 32.383465] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| [ 32.389832] configfs-gadget gadget: usb_composite_setup_continue | |
| [ 32.395889] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| [ 32.404931] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 32.411243] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 32.415611] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.422072] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 32.428336] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 32.434260] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.440696] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 32.446960] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 32.453208] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.459677] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 32.465927] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 32.472974] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 32.481078] configfs-gadget gadget: init ncm | |
| [ 32.485406] configfs-gadget gadget: activate ncm | |
| [ 32.490070] usb1: qlen 10 | |
| [ 32.492705] configfs-gadget gadget: ncm_close | |
| [ 32.498058] configfs-gadget gadget: reset ncm | |
| [ 32.502464] usb1: gether_disconnect | |
| [ 32.506035] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 32.512578] configfs-gadget gadget: non-CRC mode selected | |
| [ 32.518020] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 32.524032] configfs-gadget gadget: NCM16 selected | |
| [ 32.528848] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 32.555031] configfs-gadget gadget: init ncm | |
| [ 32.559380] configfs-gadget gadget: activate ncm | |
| [ 32.564051] usb1: qlen 10 | |
| [ 32.566687] configfs-gadget gadget: ncm_close | |
| [ 32.572806] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| [ 32.712786] configfs-gadget gadget: notify speed 425984000 | |
| [ 32.744795] configfs-gadget gadget: notify connect false | |
| [ 33.162939] usb0: eth_open | |
| [ 33.165708] usb0: eth_start | |
| [ 33.169106] configfs-gadget gadget: rndis_open | |
| [ 33.173595] rndis_set_param_medium: 0 4259840 | |
| [ 33.361401] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
| [ 33.368640] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 33.374500] PM: Cannot get wkup_m3_ipc handle | |
| [ 33.393791] random: crng init done | |
| [ 33.397436] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ 33.493003] configfs-gadget gadget: sending command-failure status | |
| [ 33.985848] usb1: eth_open | |
| [ 33.988760] usb1: eth_start | |
| [ 33.991703] configfs-gadget gadget: ncm_open | |
| [ 33.996007] configfs-gadget gadget: notify speed 425984000 | |
| [ 34.024782] configfs-gadget gadget: notify connect true | |
| [ 35.194683] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
| [ 35.250849] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
| [ 35.327440] omap-sham 53100000.sham: will run requests pump with realtime priority | |
| [ 35.386308] omap-aes 53500000.aes: will run requests pump with realtime priority | |
| [ 35.531896] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 35.537988] PM: Cannot get wkup_m3_ipc handle | |
| [ 35.576065] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
| [ 35.582139] PM: Cannot get wkup_m3_ipc handle | |
| [ 40.945612] gs_open: start ttyGS0 | |
| [ 40.949077] gs_open: ttyGS0 (2b0d42a3,752f1706) | |
| [ 40.987510] gs_close: ttyGS0 (2b0d42a3,752f1706) ... | |
| [ 40.992570] gs_close: ttyGS0 (2b0d42a3,752f1706) done! | |
| [ 41.017679] gs_open: start ttyGS0 | |
| [ 41.021063] gs_open: ttyGS0 (2b0d42a3,38706281) | |
| [ 41.026186] gs_close: ttyGS0 (2b0d42a3,38706281) ... | |
| [ 41.031197] gs_close: ttyGS0 (2b0d42a3,38706281) done! | |
| [ 41.120079] gs_open: start ttyGS0 | |
| [ 41.123464] gs_open: ttyGS0 (2b0d42a3,e0d0b10a) | |
| [ 41.147499] gs_close: ttyGS0 (2b0d42a3,e0d0b10a) ... | |
| [ 41.152557] gs_close: ttyGS0 (2b0d42a3,e0d0b10a) done! | |
| [ 41.177646] gs_open: start tty[ 69.370314] configfs-gadget gadget: suspend | |
| GS0 | |
| [ 41.181030] gs_open: ttyGS0 (2b0d42a3,6e6b1add) | |
| [ 50.572744] configfs-gadget gadget: reset ncm | |
| [ 50.577180] usb1: gether_disconnect | |
| [ 50.580801] configfs-gadget gadget: notify speed 425984000 | |
| [ 50.643737] configfs-gadget gadget: reset config | |
| [ 50.648436] configfs-gadget gadget: rndis deactivated | |
| [ 50.653520] usb0: gether_disconnect | |
| [ 50.657161] configfs-gadget gadget: ncm deactivated | |
| [ 50.662075] configfs-gadget gadget: acm ttyGS0 deactivated | |
| [ 50.668058] configfs-gadget gadget: bulk_out_complete --> -104, 0/31 | |
| [ 50.674482] configfs-gadget gadget: reset interface | |
| [ 50.683911] gs_close: ttyGS0 (2b0d42a3,6e6b1add) ... | |
| [ 50.688956] gs_close: ttyGS0 (2b0d42a3,6e6b1add) done! | |
| [ 50.698847] gs_open: ttyGS0 (2b0d42a3,096d9207) | |
| [ 50.703536] gs_close: ttyGS0 (2b0d42a3,096d9207) ... | |
| [ 50.708534] gs_close: ttyGS0 (2b0d42a3,096d9207) done! | |
| [ 50.737450] gs_open: ttyGS0 (2b0d42a3,72f46c97) | |
| [ 50.742360] gs_close: ttyGS0 (2b0d42a3,72f46c97) ... | |
| [ 50.747368] gs_close: ttyGS0 (2b0d42a3,72f46c97) done! | |
| [ 50.865019] configfs-gadget gadget: high-speed config #1: c | |
| [ 50.870750] configfs-gadget gadget: init rndis | |
| [ 50.875220] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 50.881713] usb0: qlen 10 | |
| [ 50.884346] configfs-gadget gadget: rndis_open | |
| [ 50.888810] rndis_set_param_medium: 0 4259840 | |
| [ 50.893192] usb0: eth_start | |
| [ 50.896050] rndis_set_param_dev: | |
| [ 50.899318] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 50.909192] configfs-gadget gadget: delayed_status count 1 | |
| [ 50.914703] configfs-gadget gadget: reset ncm control 3 | |
| [ 50.919951] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 50.924858] configfs-gadget gadget: notify speed 425984000 | |
| [ 50.930384] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 50.935372] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 50.940628] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| [ 50.946998] configfs-gadget gadget: usb_composite_setup_continue | |
| [ 50.953083] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| [ 50.961758] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 50.968047] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 50.972430] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 50.978900] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 50.985153] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 50.991118] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 50.997678] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 51.003952] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 51.010278] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 51.016864] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 51.023150] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 51.030312] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 51.038863] configfs-gadget gadget: init ncm | |
| [ 51.043187] configfs-gadget gadget: activate ncm | |
| [ 51.047851] usb1: qlen 10 | |
| [ 51.050484] configfs-gadget gadget: ncm_open | |
| [ 51.054827] usb1: eth_start | |
| [ 51.058300] configfs-gadget gadget: reset ncm | |
| [ 51.062701] usb1: gether_disconnect | |
| [ 51.066426] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 51.072599] configfs-gadget gadget: non-CRC mode selected | |
| [ 51.078031] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 51.084081] configfs-gadget gadget: NCM16 selected | |
| [ 51.088904] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 51.112933] configfs-gadget gadget: init ncm | |
| [ 51.117273] configfs-gadget gadget: activate ncm | |
| [ 51.121940] usb1: qlen 10 | |
| [ 51.124575] configfs-gadget gadget: ncm_open | |
| [ 51.128870] usb1: eth_start | |
| [ 51.134108] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0[ 69.714108] configfs-gadget gadget: reset config | |
| [ 69.724223] configfs-gadget gadget: rndis deactivated | |
| [ 69.729301] usb0: gether_disconnect | |
| [ 69.732900] configfs-gadget gadget: ncm deactivated | |
| [ 69.737803] usb1: gether_disconnect | |
| [ 69.741342] configfs-gadget gadget: acm ttyGS0 deactivated | |
| 005 l7 | |
| [ 51.156593] configfs-gadget gadget: sending command-f[ 69.747120] configfs-gadget gadget: bulk_out_complete --> -104, 0/31 | |
| ailure status | |
| [ 51.171976] gs_open: start ttyGS0 | |
| [ 51.1754[ 69.759028] configfs-gadget gadget: reset interface | |
| 24] gs_open: ttyGS0 (614cfa93,5aae5b5c) | |
| [ 51.192345] gs_close: ttyGS0 (614cfa93,5aae5b5c) ... | |
| [ 51.197392] gs_close: ttyGS[ 69.777421] gs_close: ttyGS0 (2b0d42a3,972e7fa0) ... | |
| [ 69.785674] gs_close: ttyGS0 (2b0d42a3,972e7fa0) done! | |
| 0 (614cfa93,5aae5b5c) done! | |
| [ 51.209316] configfs-gadget gadget: notify speed 425984000 | |
| [ 51.216734] gs_open: start ttyGS0 | |
| [ 51.220097] gs_open: ttyGS0 (efe422b8,8645b950) | |
| [ 51.241330] configfs-gadget gadget: notify connect true | |
| [ 51.250484][ 69.809887] gs_open: ttyGS0 (59dea183,27d75038) | |
| gs_close: ttyGS0 (efe422b8,8645b950) ... | |
| [ 51.255528] gs_clo[ 69.819821] gs_close: ttyGS0 (59dea183,27d75038) ... | |
| [ 69.828515] gs_close: ttyGS0 (59dea183,27d75038) done! | |
| se: ttyGS0 (efe422b8,8645b950) done! | |
| [ 51.312526] gs_open: st[ 69.835656] gs_open: ttyGS0 (59dea183,a501e5d7) | |
| art ttyGS0 | |
| [ 51.315907] gs_open: ttyGS0 (614cfa93,c27ec85b) | |
| [ 69.845508] gs_close: ttyGS0 (59dea183,a501e5d7) ... | |
| [ 69.854632] gs_close: ttyGS0 (59dea183,a501e5d7) done! | |
| [ 51.322470] gs_close: ttyGS0 (614cfa93,c27ec85b) ... | |
| [ 51.327510] gs_close: ttyGS0 (614cfa93,c27ec85b) done! | |
| [ 51.334796] gs_open: start ttyGS0 | |
| [ 51.338169] gs_open: ttyGS0 (614cfa93,6ff216da) | |
| [ 56.250809] configfs-gadget gadget: suspend | |
| [ 56.460718] configfs-gadget gadget: reset config | |
| [ 56.465412] configfs-gadget gadget: rndis deactivated | |
| [ 56.470490] usb0: gether_disconnect | |
| [ 56.474092] configfs-gadget gadget: ncm deactivated | |
| [ 56.478996] usb1: gether_disconnect | |
| [ 56.482539] configfs-gadget gadget: acm ttyGS0 deactivated | |
| [ 56.488864] configfs-gadget gadget: bulk_out_complete --> -104, 0/31 | |
| [ 56.495298] configfs-gadget gadget: reset interface | |
| [ 56.507270] gs_close: ttyGS0 (614cfa93,6ff216da) ... | |
| [ 56.512320] gs_close: ttyGS0 (614cfa93,6ff216da) done! | |
| [ 56.698581] configfs-gadget gadget: high-speed config #1: c | |
| [ 56.704269] configfs-gadget gadget: init rndis | |
| [ 56.708735] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 56.715226] usb0: qlen [ 69.946727] configfs-gadget gadget: high-speed config #1: c | |
| [ 69.955049] configfs-gadget gadget: init rndis | |
| [ 69.959515] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 69.966007] usb0: qlen 10 | |
| [ 69.968639] configfs-gadget gadget: rndis_open | |
| [ 69.973104] rndis_set_param_medium: 0 4259840 | |
| [ 69.977491] usb0: eth_start | |
| [ 69.980346] rndis_set_param_dev: | |
| [ 69.983610] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 69.993486] configfs-gadget gadget: delayed_status count 1 | |
| [ 69.998998] configfs-gadget gadget: reset ncm control 3 | |
| [ 70.004246] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 70.009153] configfs-gadget gadget: notify speed 425984000 | |
| [ 70.014679] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 70.019667] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 70.024922] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| 10 | |
| [ 56.717860] configfs-gadget gadget: rndis_open | |
| [ 56.72[ 70.031130] configfs-gadget gadget: usb_composite_setup_continue | |
| 2324] rndis_set_param_medium: 0 4259840 | |
| [ 56.726709] usb0: et[ 70.042715] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| h_start | |
| [ 56.729568] rndis_set_param_dev: | |
| [ 56.732834] con[ 70.057249] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| figfs-gadget gadget: set_config: interface 2 (Mass Storage Funct[ 70.068547] rndis_msg_parser: RNDIS_MSG_INIT | |
| ion) requested delayed status | |
| [ 56.742709] configfs-gadget ga[ 70.078487] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| dget: delayed_status count 1 | |
| [ 56.748219] configfs-gadget gad[ 70.090450] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| get: reset ncm control 3 | |
| [ 56.753469] configfs-gadget gadget:[ 70.102256] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| init ncm ctrl 3 | |
| [ 56.758375] configfs-gadget gadget: notify [ 70.113736] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| speed 425984000 | |
| [ 56.763899] configfs-gadget gadget: reset ac[ 70.125723] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| m ttyGS0 | |
| [ 56.768888] configfs-gadget gadget: activate acm tt[ 70.137557] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| yGS0 | |
| [ 56.774144] configfs-gadget gadget: acm ttyGS0 serial s[ 70.149379] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| tate 0000 | |
| [ 56.782179] configfs-gadget gadget: usb_composite_[ 70.161347] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| setup_continue | |
| [ 56.788397] configfs-gadget gadget: usb_compo[ 70.173148] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| site_setup_continue: Completing delayed status | |
| [ 56.797284] c[ 70.185763] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| onfigfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 56.80[ 70.200104] configfs-gadget gadget: init ncm | |
| [ 70.207574] configfs-gadget gadget: activate ncm | |
| [ 70.212239] usb1: qlen 10 | |
| [ 70.214874] configfs-gadget gadget: ncm_open | |
| [ 70.219201] usb1: eth_start | |
| 3553] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 56.807984] configfs-[ 70.223166] configfs-gadget gadget: reset ncm | |
| [ 70.232133] usb1: gether_disconnect | |
| gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.814503] [ 70.235819] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 56.8[ 70.247494] configfs-gadget gadget: non-CRC mode selected | |
| [ 70.258430] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| 20785] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 5[ 70.264462] configfs-gadget gadget: NCM16 selected | |
| [ 70.274797] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| 6.826797] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.833262] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 56.839548] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 56.845851] configfs-gadget gadget: rndis r[ 70.301609] configfs-gadget gadget: init ncm | |
| [ 70.307467] configfs-gadget gadget: activate ncm | |
| [ 70.312136] usb1: qlen 10 | |
| [ 70.314774] configfs-gadget gadget: ncm_open | |
| [ 70.319069] usb1: eth_start | |
| eqa1.01 v0000 i0000 l1025 | |
| [ 56.852332] configfs-gadget gadget[ 70.323887] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| : rndis req21.00 v0000 i0000 l32 | |
| [ 56.858593] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 56.865670] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 56.874229] configfs-gadget gadget: init ncm | |
| [ 56.878543] configfs-gadget gadget: activate ncm | |
| [ 56.883204] usb1: qlen 10 | |
| [ 56.885838] configfs-gadget gadget: ncm_open | |
| [ 56.890140] usb1: eth_start | |
| [ 56.894083] configfs-gadget gadget: reset ncm | |
| [ 56.898500] usb1: gether_disconnect | |
| [ 56.902161] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 56.908294] configfs-gadget gadget: non-CRC mode selected | |
| [ 56.913724] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 56.919797] configfs-gadget gadget: NCM16 selected | |
| [ 56.924617] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 56.949380] configfs-gadget gadget: init ncm | |
| [ 56.953728] configfs-gadget gadget: activate ncm | |
| [ 56.958397] usb1: qlen 10 | |
| [ 56.961031] configfs-gadget gadget: ncm_open | |
| [ 56.965364] usb1: eth_start | |
| [ 56.970605] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| [ 57.071409] gs_open: start ttyGS0 | |
| [ 57.074850] gs_open: ttyGS0 (9c1f23cd,096d9207) | |
| [ 57.084495] gs_close: ttyGS0 (9c1f23cd,096d9207) ... | |
| [ 57.089537] gs_close: ttyGS0 ([ 70.441938] configfs-gadget gadget: notify speed 425984000 | |
| 9c1f23cd,096d9207) done! | |
| [ 57.101045] gs_open: start ttyGS0 | |
| [ 57.104422] gs_open: ttyGS0 (9c1f23cd,2de113a6) | |
| [ 57.114246] gs_close: ttyGS0 (9c1f23cd,2de113a6) ... | |
| [ 57.119281] gs_close: ttyGS0 (9c1f23cd,2de113a6) done! | |
| [ 57.129525] configfs-[ 70.473960] configfs-gadget gadget: notify connect true | |
| gadget gadget: notify speed 425984000 | |
| [ 57.161546] configfs-gadget gadget: notify connect true | |
| [ 57.440806] gs_open: start ttyGS0 | |
| [ 57.444190] gs_open: ttyGS0 (2b0d42a3,83568b6e) | |
| [ 57.467442] gs_close: ttyGS0 (2b0d42a3,83568b6e) ... | |
| [ 57.472497] gs_close: ttyGS0 (2b0d42a3,83568b6e) done! | |
| [ 57.487686] [ 70.503023] gs_open: start ttyGS0 | |
| [ 70.511088] gs_open: ttyGS0 (4ba568e0,5eea5b78) | |
| gs_open: start ttyGS0 | |
| [ 57.491069] gs_open: ttyGS0 (2b0d42a3,3b4f5327) | |
| [ 57.508014] gs_close: ttyGS0 (2b0d42a3,3b4f5327) .[ 70.525946] gs_close: ttyGS0 (4ba568e0,5eea5b78) ... | |
| [ 70.532011] gs_close: ttyGS0 (4ba568e0,5eea5b78) done! | |
| .. | |
| [ 57.513065] gs_close: ttyGS0 (2b0d42a3,3b4f5327) done! | |
| [[ 70.539469] gs_open: start ttyGS0 | |
| [ 70.546264] gs_open: ttyGS0 (4ba568e0,0bbfd7ef) | |
| 57.554287] gs_open: start ttyGS0 | |
| [ 57.557668] gs_open: tty[ 70.553260] gs_close: ttyGS0 (4ba568e0,0bbfd7ef) ... | |
| [ 70.561407] gs_close: ttyGS0 (4ba568e0,0bbfd7ef) done! | |
| GS0 (2b0d42a3,feb5e638) | |
| [ 57.570063] gs_close: ttyGS0 (2b0d42a3,feb5e638) ... | |
| [ 57.575122] gs_close: ttyGS0 (2b0d42a3,feb5e638) done! | |
| [ 57.585506] gs_open: start ttyGS0 | |
| [ 57.588889] gs_open: ttyGS0 (2b0d42a3,972e7fa0) | |
| [ 57.877842] configfs-g[ 70.586169] gs_open: start ttyGS0 | |
| [ 70.592444] gs_open: ttyGS0 (4ba568e0,e946c482) | |
| adget gadget: sending command-failure status | |
| [ 69.370314] con[ 70.599191] gs_close: ttyGS0 (4ba568e0,e946c482) ... | |
| [ 70.607753] gs_close: ttyGS0 (4ba568e0,e946c482) done! | |
| figfs-gadget gadget: suspend | |
| [ 69.714108] configfs-gadget gad[ 70.615118] gs_open: start ttyGS0 | |
| [ 70.621964] gs_open: ttyGS0 (4ba568e0,818fa8a6) | |
| get: reset config | |
| [ 69.724223] configfs-gadget gadget: rndis deactivated | |
| [ 69.729301] usb0: gether_disconnect | |
| [ 69.732900] configfs-gadget gadget: ncm deactivated | |
| [ 69.737803] usb1: gether_disconnect | |
| [ 69.741342] configfs-gadget gadget: acm ttyGS0 deactivated | |
| [ 69.747120] configfs-gadget gadget: bulk_out_complete --> -104, 0/31 | |
| [ 69.759028] configfs-gadget gadget: reset interface | |
| [ 69.777421] gs_close: ttyGS0 (2b0d42a3,972e7fa0) ... | |
| [ 69.785674] gs_close: ttyGS0 (2b0d42a3,972e7fa0) done! | |
| [ 69.809887] gs_open: ttyGS0 (59dea183,27d75038) | |
| [ 69.819821] gs_close: ttyGS0 (59dea183,27d75038) ... | |
| [ 69.828515] gs_close: ttyGS0 (59dea183,27d75038) done! | |
| [ 69.835656] gs_open: ttyGS0 (59dea183,a501e5d7) | |
| [ 69.845508] gs_close: ttyGS0 (59dea183,a501e5d7) ... | |
| [ 69.854632] gs_close: ttyGS0 (59dea183,a501e5d7) done! | |
| [ 69.946727] configfs-gadget gadget: high-speed config #1: c | |
| [ 69.955049] configfs-gadget gadget: init rndis | |
| [ 69.959515] configfs-gadget gadget: RNDIS RX/TX early activation ... | |
| [ 69.966007] usb0: qlen 10 | |
| [ 69.968639] configfs-gadget gadget: rndis_open | |
| [ 69.973104] rndis_set_param_medium: 0 4259840 | |
| [ 69.977491] usb0: eth_start | |
| [ 69.980346] rndis_set_param_dev: | |
| [ 69.983610] configfs-gadget gadget: set_config: interface 2 (Mass Storage Function) requested delayed status | |
| [ 69.993486] configfs-gadget gadget: delayed_status count 1 | |
| [ 69.998998] configfs-gadget gadget: reset ncm control 3 | |
| [ 70.004246] configfs-gadget gadget: init ncm ctrl 3 | |
| [ 70.009153] configfs-gadget gadget: notify speed 425984000 | |
| [ 70.014679] configfs-gadget gadget: reset acm ttyGS0 | |
| [ 70.019667] configfs-gadget gadget: activate acm ttyGS0 | |
| [ 70.024922] configfs-gadget gadget: acm ttyGS0 serial state 0000 | |
| [ 70.031130] configfs-gadget gadget: usb_composite_setup_continue | |
| [ 70.042715] configfs-gadget gadget: usb_composite_setup_continue: Completing delayed status | |
| [ 70.057249] configfs-gadget gadget: rndis req21.00 v0000 i0000 l24 | |
| [ 70.068547] rndis_msg_parser: RNDIS_MSG_INIT | |
| [ 70.078487] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 70.090450] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 70.102256] gen_ndis_query_resp: RNDIS_OID_GEN_PHYSICAL_MEDIUM | |
| [ 70.113736] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 70.125723] configfs-gadget gadget: rndis req21.00 v0000 i0000 l76 | |
| [ 70.137557] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS | |
| [ 70.149379] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 70.161347] configfs-gadget gadget: rndis req21.00 v0000 i0000 l32 | |
| [ 70.173148] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d | |
| [ 70.185763] configfs-gadget gadget: rndis reqa1.01 v0000 i0000 l1025 | |
| [ 70.200104] configfs-gadget gadget: init ncm | |
| [ 70.207574] configfs-gadget gadget: activate ncm | |
| [ 70.212239] usb1: qlen 10 | |
| [ 70.214874] configfs-gadget gadget: ncm_open | |
| [ 70.219201] usb1: eth_start | |
| [ 70.223166] configfs-gadget gadget: reset ncm | |
| [ 70.232133] usb1: gether_disconnect | |
| [ 70.235819] configfs-gadget gadget: ncm reqa1.80 v0000 i0003 l28 | |
| [ 70.247494] configfs-gadget gadget: non-CRC mode selected | |
| [ 70.258430] configfs-gadget gadget: ncm req21.8a v0000 i0003 l0 | |
| [ 70.264462] configfs-gadget gadget: NCM16 selected | |
| [ 70.274797] configfs-gadget gadget: ncm req21.84 v0000 i0003 l0 | |
| [ 70.301609] configfs-gadget gadget: init ncm | |
| [ 70.307467] configfs-gadget gadget: activate ncm | |
| [ 70.312136] usb1: qlen 10 | |
| [ 70.314774] configfs-gadget gadget: ncm_open | |
| [ 70.319069] usb1: eth_start | |
| [ 70.323887] configfs-gadget gadget: acm ttyGS0 req21.20 v0000 i0005 l7 | |
| [ 70.441938] configfs-gadget gadget: notify speed 425984000 | |
| [ 70.473960] configfs-gadget gadget: notify connect true | |
| [ 70.503023] gs_open: start ttyGS0 | |
| [ 70.511088] gs_open: ttyGS0 (4ba568e0,5eea5b78) | |
| [ 70.525946] gs_close: ttyGS0 (4ba568e0,5eea5b78) ... | |
| [ 70.532011] gs_close: ttyGS0 (4ba568e0,5eea5b78) done! | |
| [ 70.539469] gs_open: start ttyGS0 | |
| [ 70.546264] gs_open: ttyGS0 (4ba568e0,0bbfd7ef) | |
| [ 70.553260] gs_close: ttyGS0 (4ba568e0,0bbfd7ef) ... | |
| [ 70.561407] gs_close: ttyGS0 (4ba568e0,0bbfd7ef) done! | |
| [ 70.586169] gs_open: start ttyGS0 | |
| [ 70.592444] gs_open: ttyGS0 (4ba568e0,e946c482) | |
| [ 70.599191] gs_close: ttyGS0 (4ba568e0,e946c482) ... | |
| [ 70.607753] gs_close: ttyGS0 (4ba568e0,e946c482) done! | |
| [ 70.615118] gs_open: start ttyGS0 | |
| [ 70.621964] gs_open: ttyGS0 (4ba568e0,818fa8a6) | |
| [ 71.223550] configfs-gadget gadget: sending command-failure status |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment