Created
May 29, 2020 17:41
-
-
Save pdp7/fc5186f46e34c3acc1b1a169be85d3a9 to your computer and use it in GitHub Desktop.
boot after force num_maps=1
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2019.04-00002-g3d8c979660 (Nov 01 2019 - 09:14:23 -0500) | |
Trying to boot from MMC1 | |
Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
U-Boot 2019.04-00002-g3d8c979660 (Nov 01 2019 - 09:14:23 -0500), Build: jenkins-github_Bootloader-Builder-134 | |
CPU : AM335X-GP rev 2.1 | |
I2C: ready | |
DRAM: 512 MiB | |
No match for driver 'omap_hsmmc' | |
No match for driver 'omap_hsmmc' | |
Some drivers were not found | |
Reset Source: Power-on reset has occurred. | |
RTC 32KCLK Source: Internal. | |
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 | |
Loading Environment from EXT4... ** File not found /boot/uboot.env ** | |
** Unable to read "/boot/uboot.env" from mmc0:1 ** | |
Model: BeagleBoard.org PocketBeagle | |
<ethaddr> not set. Validating first E-fuse MAC | |
Net: usb_ether | |
Press SPACE to abort autoboot in 0 seconds | |
board_name=[A335PBGL] ... | |
switch to partitions #0, OK | |
mmc0 is current device | |
SD/MMC found on device 0 | |
switch to partitions #0, OK | |
mmc0 is current device | |
Scanning mmc 0:1... | |
gpio: pin 56 (gpio 56) value is 0 | |
gpio: pin 55 (gpio 55) value is 0 | |
gpio: pin 54 (gpio 54) value is 0 | |
gpio: pin 53 (gpio 53) value is 1 | |
switch to partitions #0, OK | |
mmc0 is current device | |
gpio: pin 54 (gpio 54) value is 1 | |
Checking for: /uEnv.txt ... | |
Checking for: /boot.scr ... | |
Checking for: /boot/boot.scr ... | |
Checking for: /boot/uEnv.txt ... | |
gpio: pin 55 (gpio 55) value is 1 | |
3425 bytes read in 36 ms (92.8 KiB/s) | |
Loaded environment from /boot/uEnv.txt | |
Checking if uname_r is set in /boot/uEnv.txt... | |
gpio: pin 56 (gpio 56) value is 1 | |
Running uname_boot ... | |
loading /boot/vmlinuz-5.7.0-rc6-omap2plus-r0 ... | |
8789840 bytes read in 609 ms (13.8 MiB/s) | |
debug: [enable_uboot_overlays=] ... | |
loading /boot/dtbs/5.7.0-rc6-omap2plus-r0/am335x-pocketbeagle.dtb ... | |
57527 bytes read in 87 ms (645.5 KiB/s) | |
uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable... | |
debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 earlyprintk ftrace=function ftrace_filter=pcs*,pinconf*,pinctrl*,gpio*,omap_gpio* ftrace_notrace=gpio_omap_cpu_notifier,gpiod_set_value,pinctrl_pm_select_idle_state,pinctrl_select_bound_state,pinctrl_select_default_state] ... | |
debug: [bootz 0x82000000 - 0x88000000] ... | |
## Flattened Device Tree blob at 88000000 | |
Booting using the fdt blob at 0x88000000 | |
Loading Device Tree to 8ffee000, end 8ffff0b6 ... OK | |
Starting kernel ... | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 5.7.0-rc6-omap2plus-r0 (pdp7@x1) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)), GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #29 PREEMPT Fri May 29 19:26:08 CEST 2020 | |
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] OF: fdt: Machine model: TI AM335x PocketBeagle | |
[ 0.000000] printk: bootconsole [earlycon0] enabled | |
[ 0.000000] Memory policy: Data cache writeback | |
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000 | |
[ 0.000000] On node 0 totalpages: 130816 | |
[ 0.000000] Normal zone: 1150 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 130816 pages, LIFO batch:31 | |
[ 0.000000] CPU: All CPU(s) started in SVC mode. | |
[ 0.000000] AM335X ES2.1 (sgx neon) | |
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
[ 0.000000] pcpu-alloc: [0] 0 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129666 | |
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 earlyprintk ftrace=function ftrace_filter=pcs*,pinconf*,pinctrl*,gpio*,omap_gpio* ftrace_notrace=gpio_omap_cpu_notifier,gpiod_set_value,pinctrl_pm_select_idle_state,pinctrl_select_bound_state,pinctrl_select_default_state | |
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 452688K/523264K available (9216K kernel code, 1382K rwdata, 3252K rodata, 1024K init, 327K bss, 21424K reserved, 49152K cma-reserved, 0K highmem) | |
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2f/0x2f4 with crng_init=0 | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] ftrace: allocating 40954 entries in 80 pages | |
[ 0.000000] ftrace: allocated 80 pages with 2 groups | |
[ 0.000000] Starting tracer 'function' | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts | |
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz | |
[ 0.000014] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
[ 0.008051] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
[ 0.017503] OMAP clocksource: timer1 at 24000000 Hz | |
[ 0.023032] timer_probe: no matching timers found | |
[ 0.028118] Console: colour dummy device 80x30 | |
[ 0.032711] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
[ 0.039411] This ensures that you still see kernel messages. Please | |
[ 0.045841] update your kernel commandline. | |
[ 0.050174] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) | |
[ 0.079996] pid_max: default: 32768 minimum: 301 | |
[ 0.085035] LSM: Security Framework initializing | |
[ 0.089906] Yama: becoming mindful. | |
[ 0.093642] AppArmor: AppArmor initialized | |
[ 0.097863] TOMOYO Linux initialized | |
[ 0.101626] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.109138] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.118211] CPU: Testing write buffer coherency: ok | |
[ 0.123298] CPU0: Spectre v2: using BPIALL workaround | |
[ 0.129531] Setting up static identity map for 0x80100000 - 0x80100054 | |
[ 0.136460] rcu: Hierarchical SRCU implementation. | |
[ 0.144654] devtmpfs: initialized | |
[ 0.160918] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
[ 0.169445] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ 0.179501] futex hash table entries: 256 (order: -1, 3072 bytes, linear) | |
[ 0.190199] xor: measuring software checksum speed | |
[ 0.233558] arm4regs : 1221.000 MB/sec | |
[ 0.277554] 8regs : 1094.000 MB/sec | |
[ 0.321551] 32regs : 1054.000 MB/sec | |
[ 0.365551] neon : 1681.000 MB/sec | |
[ 0.369847] xor: using function: neon (1681.000 MB/sec) | |
[ 0.375238] pinctrl core: initialized pinctrl subsystem | |
[ 0.381066] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT | |
[ 0.387843] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.387849] thermal_sys: Registered thermal governor 'bang_bang' | |
[ 0.394126] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.401260] NET: Registered protocol family 16 | |
[ 0.416461] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
[ 0.446729] l3-aon-clkctrl:0000:0: failed to disable | |
[ 0.452797] audit: initializing netlink subsys (disabled) | |
[ 0.459499] cpuidle: using governor menu | |
[ 0.463594] audit: type=2000 audit(0.368:1): state=initialized audit_enabled=0 res=1 | |
[ 0.491629] hw-breakpoint: debug architecture 0x4 unsupported. | |
[ 0.525518] raid6: skip pq benchmark and using algorithm neonx8 | |
[ 0.532392] raid6: using neon recovery algorithm | |
[ 0.539027] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) | |
[ 0.546572] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup | |
[ 0.554242] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' | |
[ 0.563280] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' | |
[ 0.572216] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup | |
[ 0.579994] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found | |
[ 0.588183] iommu: Default domain type: Translated | |
[ 0.594630] SCSI subsystem initialized | |
[ 0.598574] libata version 3.00 loaded. | |
[ 0.602779] usbcore: registered new interface driver usbfs | |
[ 0.608472] usbcore: registered new interface driver hub | |
[ 0.614045] usbcore: registered new device driver usb | |
[ 0.620113] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.625238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.634632] PTP clock support registered | |
[ 0.639587] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.646587] NetLabel: Initializing | |
[ 0.650114] NetLabel: domain hash size = 128 | |
[ 0.654590] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ 0.660476] NetLabel: unlabeled traffic allowed by default | |
[ 0.667063] clocksource: Switched to clocksource timer1 | |
[ 1.167067] random: fast init done | |
[ 1.653750] VFS: Disk quotas dquot_6.6.0 | |
[ 1.657930] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 1.666004] AppArmor: AppArmor Filesystem Enabled | |
[ 1.680848] NET: Registered protocol family 2 | |
[ 1.686288] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) | |
[ 1.694964] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
[ 1.702956] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
[ 1.710355] TCP: Hash tables configured (established 4096 bind 4096) | |
[ 1.717063] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 1.723851] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) | |
[ 1.731299] NET: Registered protocol family 1 | |
[ 1.736639] RPC: Registered named UNIX socket transport module. | |
[ 1.742825] RPC: Registered udp transport module. | |
[ 1.747667] RPC: Registered tcp transport module. | |
[ 1.752501] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 1.759122] NET: Registered protocol family 44 | |
[ 1.764678] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
[ 1.775307] Initialise system trusted keyrings | |
[ 1.780250] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
[ 1.793279] zbud: loaded | |
[ 1.798666] NFS: Registering the id_resolver key type | |
[ 1.804003] Key type id_resolver registered | |
[ 1.808315] Key type id_legacy registered | |
[ 1.812452] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 1.819624] fuse: init (API version 7.31) | |
[ 1.858801] Key type asymmetric registered | |
[ 1.863216] Asymmetric key parser 'x509' registered | |
[ 1.868387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
[ 1.876235] io scheduler mq-deadline registered | |
[ 1.887515] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) | |
[ 1.894109] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31) | |
[ 1.902554] OMAP GPIO hardware version 0.1 | |
[ 1.921641] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) | |
[ 1.928327] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63) | |
[ 1.939263] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
[ 1.950406] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) | |
[ 1.957093] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95) | |
[ 1.967369] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3) | |
[ 1.974118] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio-96-127) | |
[ 1.993696] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! | |
[ 2.001900] edma 49000000.dma: TI EDMA DMA engine driver | |
[ 2.016588] pinctrl-single 44e10800.pinmux: allocating 142 pins | |
[ 2.022743] pinctrl-single 44e10800.pinmux: try to register 142 pins ... | |
[ 2.029641] pinctrl core: registered pin 0 (PIN0) on pinctrl-single | |
[ 2.036084] pinctrl core: registered pin 1 (PIN1) on pinctrl-single | |
[ 2.042525] pinctrl core: registered pin 2 (PIN2) on pinctrl-single | |
[ 2.048963] pinctrl core: registered pin 3 (PIN3) on pinctrl-single | |
[ 2.055402] pinctrl core: registered pin 4 (PIN4) on pinctrl-single | |
[ 2.061840] pinctrl core: registered pin 5 (PIN5) on pinctrl-single | |
[ 2.068278] pinctrl core: registered pin 6 (PIN6) on pinctrl-single | |
[ 2.074716] pinctrl core: registered pin 7 (PIN7) on pinctrl-single | |
[ 2.081155] pinctrl core: registered pin 8 (PIN8) on pinctrl-single | |
[ 2.087592] pinctrl core: registered pin 9 (PIN9) on pinctrl-single | |
[ 2.094030] pinctrl core: registered pin 10 (PIN10) on pinctrl-single | |
[ 2.100647] pinctrl core: registered pin 11 (PIN11) on pinctrl-single | |
[ 2.107264] pinctrl core: registered pin 12 (PIN12) on pinctrl-single | |
[ 2.113880] pinctrl core: registered pin 13 (PIN13) on pinctrl-single | |
[ 2.120497] pinctrl core: registered pin 14 (PIN14) on pinctrl-single | |
[ 2.127113] pinctrl core: registered pin 15 (PIN15) on pinctrl-single | |
[ 2.133730] pinctrl core: registered pin 16 (PIN16) on pinctrl-single | |
[ 2.140346] pinctrl core: registered pin 17 (PIN17) on pinctrl-single | |
[ 2.146961] pinctrl core: registered pin 18 (PIN18) on pinctrl-single | |
[ 2.153580] pinctrl core: registered pin 19 (PIN19) on pinctrl-single | |
[ 2.160196] pinctrl core: registered pin 20 (PIN20) on pinctrl-single | |
[ 2.166812] pinctrl core: registered pin 21 (PIN21) on pinctrl-single | |
[ 2.173428] pinctrl core: registered pin 22 (PIN22) on pinctrl-single | |
[ 2.180044] pinctrl core: registered pin 23 (PIN23) on pinctrl-single | |
[ 2.186661] pinctrl core: registered pin 24 (PIN24) on pinctrl-single | |
[ 2.193277] pinctrl core: registered pin 25 (PIN25) on pinctrl-single | |
[ 2.199893] pinctrl core: registered pin 26 (PIN26) on pinctrl-single | |
[ 2.206510] pinctrl core: registered pin 27 (PIN27) on pinctrl-single | |
[ 2.213127] pinctrl core: registered pin 28 (PIN28) on pinctrl-single | |
[ 2.219743] pinctrl core: registered pin 29 (PIN29) on pinctrl-single | |
[ 2.226360] pinctrl core: registered pin 30 (PIN30) on pinctrl-single | |
[ 2.232991] pinctrl core: registered pin 31 (PIN31) on pinctrl-single | |
[ 2.239610] pinctrl core: registered pin 32 (PIN32) on pinctrl-single | |
[ 2.246227] pinctrl core: registered pin 33 (PIN33) on pinctrl-single | |
[ 2.252843] pinctrl core: registered pin 34 (PIN34) on pinctrl-single | |
[ 2.259540] pinctrl core: registered pin 35 (PIN35) on pinctrl-single | |
[ 2.266165] pinctrl core: registered pin 36 (PIN36) on pinctrl-single | |
[ 2.272783] pinctrl core: registered pin 37 (PIN37) on pinctrl-single | |
[ 2.279401] pinctrl core: registered pin 38 (PIN38) on pinctrl-single | |
[ 2.286018] pinctrl core: registered pin 39 (PIN39) on pinctrl-single | |
[ 2.292635] pinctrl core: registered pin 40 (PIN40) on pinctrl-single | |
[ 2.299252] pinctrl core: registered pin 41 (PIN41) on pinctrl-single | |
[ 2.305869] pinctrl core: registered pin 42 (PIN42) on pinctrl-single | |
[ 2.312486] pinctrl core: registered pin 43 (PIN43) on pinctrl-single | |
[ 2.319102] pinctrl core: registered pin 44 (PIN44) on pinctrl-single | |
[ 2.325719] pinctrl core: registered pin 45 (PIN45) on pinctrl-single | |
[ 2.332336] pinctrl core: registered pin 46 (PIN46) on pinctrl-single | |
[ 2.338953] pinctrl core: registered pin 47 (PIN47) on pinctrl-single | |
[ 2.345576] pinctrl core: registered pin 48 (PIN48) on pinctrl-single | |
[ 2.352193] pinctrl core: registered pin 49 (PIN49) on pinctrl-single | |
[ 2.358809] pinctrl core: registered pin 50 (PIN50) on pinctrl-single | |
[ 2.365425] pinctrl core: registered pin 51 (PIN51) on pinctrl-single | |
[ 2.372042] pinctrl core: registered pin 52 (PIN52) on pinctrl-single | |
[ 2.378658] pinctrl core: registered pin 53 (PIN53) on pinctrl-single | |
[ 2.385276] pinctrl core: registered pin 54 (PIN54) on pinctrl-single | |
[ 2.391893] pinctrl core: registered pin 55 (PIN55) on pinctrl-single | |
[ 2.398509] pinctrl core: registered pin 56 (PIN56) on pinctrl-single | |
[ 2.405126] pinctrl core: registered pin 57 (PIN57) on pinctrl-single | |
[ 2.411742] pinctrl core: registered pin 58 (PIN58) on pinctrl-single | |
[ 2.418359] pinctrl core: registered pin 59 (PIN59) on pinctrl-single | |
[ 2.424976] pinctrl core: registered pin 60 (PIN60) on pinctrl-single | |
[ 2.431592] pinctrl core: registered pin 61 (PIN61) on pinctrl-single | |
[ 2.438208] pinctrl core: registered pin 62 (PIN62) on pinctrl-single | |
[ 2.444834] pinctrl core: registered pin 63 (PIN63) on pinctrl-single | |
[ 2.451455] pinctrl core: registered pin 64 (PIN64) on pinctrl-single | |
[ 2.458071] pinctrl core: registered pin 65 (PIN65) on pinctrl-single | |
[ 2.464688] pinctrl core: registered pin 66 (PIN66) on pinctrl-single | |
[ 2.471304] pinctrl core: registered pin 67 (PIN67) on pinctrl-single | |
[ 2.477921] pinctrl core: registered pin 68 (PIN68) on pinctrl-single | |
[ 2.484537] pinctrl core: registered pin 69 (PIN69) on pinctrl-single | |
[ 2.491154] pinctrl core: registered pin 70 (PIN70) on pinctrl-single | |
[ 2.497770] pinctrl core: registered pin 71 (PIN71) on pinctrl-single | |
[ 2.504388] pinctrl core: registered pin 72 (PIN72) on pinctrl-single | |
[ 2.511005] pinctrl core: registered pin 73 (PIN73) on pinctrl-single | |
[ 2.517621] pinctrl core: registered pin 74 (PIN74) on pinctrl-single | |
[ 2.524238] pinctrl core: registered pin 75 (PIN75) on pinctrl-single | |
[ 2.530855] pinctrl core: registered pin 76 (PIN76) on pinctrl-single | |
[ 2.537472] pinctrl core: registered pin 77 (PIN77) on pinctrl-single | |
[ 2.544088] pinctrl core: registered pin 78 (PIN78) on pinctrl-single | |
[ 2.550704] pinctrl core: registered pin 79 (PIN79) on pinctrl-single | |
[ 2.557320] pinctrl core: registered pin 80 (PIN80) on pinctrl-single | |
[ 2.563937] pinctrl core: registered pin 81 (PIN81) on pinctrl-single | |
[ 2.570552] pinctrl core: registered pin 82 (PIN82) on pinctrl-single | |
[ 2.577168] pinctrl core: registered pin 83 (PIN83) on pinctrl-single | |
[ 2.583785] pinctrl core: registered pin 84 (PIN84) on pinctrl-single | |
[ 2.590401] pinctrl core: registered pin 85 (PIN85) on pinctrl-single | |
[ 2.597018] pinctrl core: registered pin 86 (PIN86) on pinctrl-single | |
[ 2.603634] pinctrl core: registered pin 87 (PIN87) on pinctrl-single | |
[ 2.610251] pinctrl core: registered pin 88 (PIN88) on pinctrl-single | |
[ 2.616867] pinctrl core: registered pin 89 (PIN89) on pinctrl-single | |
[ 2.623483] pinctrl core: registered pin 90 (PIN90) on pinctrl-single | |
[ 2.630099] pinctrl core: registered pin 91 (PIN91) on pinctrl-single | |
[ 2.636715] pinctrl core: registered pin 92 (PIN92) on pinctrl-single | |
[ 2.643331] pinctrl core: registered pin 93 (PIN93) on pinctrl-single | |
[ 2.649947] pinctrl core: registered pin 94 (PIN94) on pinctrl-single | |
[ 2.656572] pinctrl core: registered pin 95 (PIN95) on pinctrl-single | |
[ 2.663190] pinctrl core: registered pin 96 (PIN96) on pinctrl-single | |
[ 2.669807] pinctrl core: registered pin 97 (PIN97) on pinctrl-single | |
[ 2.676424] pinctrl core: registered pin 98 (PIN98) on pinctrl-single | |
[ 2.683040] pinctrl core: registered pin 99 (PIN99) on pinctrl-single | |
[ 2.689658] pinctrl core: registered pin 100 (PIN100) on pinctrl-single | |
[ 2.696453] pinctrl core: registered pin 101 (PIN101) on pinctrl-single | |
[ 2.703247] pinctrl core: registered pin 102 (PIN102) on pinctrl-single | |
[ 2.710042] pinctrl core: registered pin 103 (PIN103) on pinctrl-single | |
[ 2.716837] pinctrl core: registered pin 104 (PIN104) on pinctrl-single | |
[ 2.723632] pinctrl core: registered pin 105 (PIN105) on pinctrl-single | |
[ 2.730427] pinctrl core: registered pin 106 (PIN106) on pinctrl-single | |
[ 2.737222] pinctrl core: registered pin 107 (PIN107) on pinctrl-single | |
[ 2.744017] pinctrl core: registered pin 108 (PIN108) on pinctrl-single | |
[ 2.750811] pinctrl core: registered pin 109 (PIN109) on pinctrl-single | |
[ 2.757606] pinctrl core: registered pin 110 (PIN110) on pinctrl-single | |
[ 2.764402] pinctrl core: registered pin 111 (PIN111) on pinctrl-single | |
[ 2.771199] pinctrl core: registered pin 112 (PIN112) on pinctrl-single | |
[ 2.777993] pinctrl core: registered pin 113 (PIN113) on pinctrl-single | |
[ 2.784789] pinctrl core: registered pin 114 (PIN114) on pinctrl-single | |
[ 2.791582] pinctrl core: registered pin 115 (PIN115) on pinctrl-single | |
[ 2.798377] pinctrl core: registered pin 116 (PIN116) on pinctrl-single | |
[ 2.805172] pinctrl core: registered pin 117 (PIN117) on pinctrl-single | |
[ 2.811967] pinctrl core: registered pin 118 (PIN118) on pinctrl-single | |
[ 2.818762] pinctrl core: registered pin 119 (PIN119) on pinctrl-single | |
[ 2.825557] pinctrl core: registered pin 120 (PIN120) on pinctrl-single | |
[ 2.832352] pinctrl core: registered pin 121 (PIN121) on pinctrl-single | |
[ 2.839147] pinctrl core: registered pin 122 (PIN122) on pinctrl-single | |
[ 2.845941] pinctrl core: registered pin 123 (PIN123) on pinctrl-single | |
[ 2.852736] pinctrl core: registered pin 124 (PIN124) on pinctrl-single | |
[ 2.859532] pinctrl core: registered pin 125 (PIN125) on pinctrl-single | |
[ 2.866326] pinctrl core: registered pin 126 (PIN126) on pinctrl-single | |
[ 2.873129] pinctrl core: registered pin 127 (PIN127) on pinctrl-single | |
[ 2.879927] pinctrl core: registered pin 128 (PIN128) on pinctrl-single | |
[ 2.886723] pinctrl core: registered pin 129 (PIN129) on pinctrl-single | |
[ 2.893518] pinctrl core: registered pin 130 (PIN130) on pinctrl-single | |
[ 2.900313] pinctrl core: registered pin 131 (PIN131) on pinctrl-single | |
[ 2.907109] pinctrl core: registered pin 132 (PIN132) on pinctrl-single | |
[ 2.913904] pinctrl core: registered pin 133 (PIN133) on pinctrl-single | |
[ 2.920699] pinctrl core: registered pin 134 (PIN134) on pinctrl-single | |
[ 2.927493] pinctrl core: registered pin 135 (PIN135) on pinctrl-single | |
[ 2.934287] pinctrl core: registered pin 136 (PIN136) on pinctrl-single | |
[ 2.941081] pinctrl core: registered pin 137 (PIN137) on pinctrl-single | |
[ 2.947876] pinctrl core: registered pin 138 (PIN138) on pinctrl-single | |
[ 2.954671] pinctrl core: registered pin 139 (PIN139) on pinctrl-single | |
[ 2.961465] pinctrl core: registered pin 140 (PIN140) on pinctrl-single | |
[ 2.968260] pinctrl core: registered pin 141 (PIN141) on pinctrl-single | |
[ 2.975099] pinctrl-single 44e10800.pinmux: 142 pins, size 568 | |
[ 2.981111] pinctrl-single 44e10800.pinmux: no hogs found | |
[ 2.988918] pinctrl-single 44e10800.pinmux: pinmux-ehrpwm0-pins index: 0x190 value: 0x1 | |
[ 2.997212] pinctrl core: add 1 pinctrl maps | |
[ 3.001631] pinctrl-single 44e10800.pinmux: found group selector 0 for pinmux-ehrpwm0-pins | |
[ 3.010139] pinctrl-single 44e10800.pinmux: request pin 100 (PIN100) for 48300200.pwm | |
[ 3.018189] pinctrl-single 44e10800.pinmux: enabling (null) function0 | |
[ 3.025288] pinctrl-single 44e10800.pinmux: pinmux-ehrpwm1-pins index: 0x48 value: 0x6 | |
[ 3.033490] pinctrl core: add 1 pinctrl maps | |
[ 3.037905] pinctrl-single 44e10800.pinmux: found group selector 1 for pinmux-ehrpwm1-pins | |
[ 3.046409] pinctrl-single 44e10800.pinmux: request pin 18 (PIN18) for 48302200.pwm | |
[ 3.054279] pinctrl-single 44e10800.pinmux: enabling (null) function1 | |
[ 3.070398] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle | |
[ 3.079610] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled | |
[ 3.088504] serial8250 serial8250: no of_node; not parsing pinctrl DT | |
[ 3.095874] pinctrl-single 44e10800.pinmux: pinmux-uart0-pins index: 0x170 value: 0x30 | |
[ 3.104103] pinctrl-single 44e10800.pinmux: pinmux-uart0-pins index: 0x174 value: 0x0 | |
[ 3.112222] pinctrl core: add 1 pinctrl maps | |
[ 3.116642] pinctrl-single 44e10800.pinmux: found group selector 2 for pinmux-uart0-pins | |
[ 3.124968] pinctrl-single 44e10800.pinmux: request pin 92 (PIN92) for 44e09000.serial | |
[ 3.133106] pinctrl-single 44e10800.pinmux: request pin 93 (PIN93) for 44e09000.serial | |
[ 3.141243] pinctrl-single 44e10800.pinmux: enabling (null) function2 | |
[ 3.148562] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 21, base_baud = 3000000) is a 8250 | |
[ 3.157701] printk: console [ttyS0] enabled | |
[ 3.157701] printk: console [ttyS0] enabled | |
[ 3.166241] printk: bootconsole [earlycon0] disabled | |
[ 3.166241] printk: bootconsole [earlycon0] disabled | |
[ 3.177105] pinctrl-single 44e10800.pinmux: pinmux-uart4-pins index: 0x70 value: 0x36 | |
[ 3.185033] pinctrl-single 44e10800.pinmux: pinmux-uart4-pins index: 0x74 value: 0x6 | |
[ 3.192945] pinctrl core: add 1 pinctrl maps | |
[ 3.197294] pinctrl-single 44e10800.pinmux: found group selector 3 for pinmux-uart4-pins | |
[ 3.205454] pinctrl-single 44e10800.pinmux: request pin 28 (PIN28) for 481a8000.serial | |
[ 3.213426] pinctrl-single 44e10800.pinmux: request pin 29 (PIN29) for 481a8000.serial | |
[ 3.221398] pinctrl-single 44e10800.pinmux: enabling (null) function3 | |
[ 3.228522] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 37, base_baud = 3000000) is a 8250 | |
[ 3.240794] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
[ 3.247287] random: crng init done | |
[ 3.261560] mdio_bus fixed-0: GPIO lookup for consumer reset | |
[ 3.267342] mdio_bus fixed-0: using lookup tables for GPIO lookup | |
[ 3.273487] mdio_bus fixed-0: No GPIO consumer reset found | |
[ 3.279036] libphy: Fixed MDIO Bus: probed | |
[ 3.283915] CAN device driver interface | |
[ 3.289820] usbcore: registered new interface driver smsc95xx | |
[ 3.297168] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset | |
[ 3.304513] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
[ 3.312079] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 3.323558] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 3.334935] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
[ 3.342649] am335x-phy-driver 47401300.usb-phy: No GPIO consumer reset found | |
[ 3.349748] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect | |
[ 3.357541] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup | |
[ 3.365089] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 3.377083] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1300[0]' | |
[ 3.388979] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup | |
[ 3.396686] am335x-phy-driver 47401300.usb-phy: No GPIO consumer vbus-detect found | |
[ 3.404410] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator | |
[ 3.419902] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset | |
[ 3.427289] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
[ 3.434859] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 3.446336] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 3.457712] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
[ 3.465423] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer reset found | |
[ 3.472523] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect | |
[ 3.480315] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup | |
[ 3.487861] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 3.499857] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/target-module@47400000/usb-phy@1b00[0]' | |
[ 3.511752] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup | |
[ 3.519460] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer vbus-detect found | |
[ 3.527168] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator | |
[ 3.540018] usbcore: registered new interface driver uas | |
[ 3.545553] usbcore: registered new interface driver usb-storage | |
[ 3.551690] usbcore: registered new interface driver ums-alauda | |
[ 3.557720] usbcore: registered new interface driver ums-cypress | |
[ 3.563805] usbcore: registered new interface driver ums-datafab | |
[ 3.569882] usbcore: registered new interface driver ums_eneub6250 | |
[ 3.576134] usbcore: registered new interface driver ums-freecom | |
[ 3.582224] usbcore: registered new interface driver ums-isd200 | |
[ 3.588216] usbcore: registered new interface driver ums-jumpshot | |
[ 3.594379] usbcore: registered new interface driver ums-karma | |
[ 3.600282] usbcore: registered new interface driver ums-onetouch | |
[ 3.606458] usbcore: registered new interface driver ums-realtek | |
[ 3.612535] usbcore: registered new interface driver ums-sddr09 | |
[ 3.618525] usbcore: registered new interface driver ums-sddr55 | |
[ 3.624513] usbcore: registered new interface driver ums-usbat | |
[ 3.636489] musb-hdrc musb-hdrc.0: MUSB HDRC host driver | |
[ 3.641901] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1 | |
[ 3.649671] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 | |
[ 3.658007] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.665279] usb usb1: Product: MUSB HDRC host driver | |
[ 3.670281] usb usb1: Manufacturer: Linux 5.7.0-rc6-omap2plus-r0 musb-hcd | |
[ 3.677115] usb usb1: SerialNumber: musb-hdrc.0 | |
[ 3.682463] hub 1-0:1.0: USB hub found | |
[ 3.686389] hub 1-0:1.0: 1 port detected | |
[ 3.700912] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
[ 3.706328] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2 | |
[ 3.714062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 | |
[ 3.722397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 3.729668] usb usb2: Product: MUSB HDRC host driver | |
[ 3.734670] usb usb2: Manufacturer: Linux 5.7.0-rc6-omap2plus-r0 musb-hcd | |
[ 3.741502] usb usb2: SerialNumber: musb-hdrc.1 | |
[ 3.746811] hub 2-0:1.0: USB hub found | |
[ 3.750729] hub 2-0:1.0: 1 port detected | |
[ 3.762083] omap_rtc 44e3e000.rtc: try to register 4 pins ... | |
[ 3.767952] pinctrl core: registered pin 0 (ext_wakeup0) on 44e3e000.rtc | |
[ 3.774704] pinctrl core: registered pin 1 (ext_wakeup1) on 44e3e000.rtc | |
[ 3.781450] pinctrl core: registered pin 2 (ext_wakeup2) on 44e3e000.rtc | |
[ 3.788195] pinctrl core: registered pin 3 (ext_wakeup3) on 44e3e000.rtc | |
[ 3.795242] omap_rtc 44e3e000.rtc: no hogs found | |
[ 3.800468] alarmtimer alarmtimer.1.auto: no of_node; not parsing pinctrl DT | |
[ 3.807823] omap_rtc 44e3e000.rtc: registered as rtc0 | |
[ 3.812961] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) | |
[ 3.821650] omap_rtc 44e3e000.rtc: GPIO lookup for consumer wp | |
[ 3.827591] omap_rtc 44e3e000.rtc: using device tree for GPIO lookup | |
[ 3.834034] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
[ 3.847611] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@3e000/rtc@0[0]' | |
[ 3.861255] omap_rtc 44e3e000.rtc: using lookup tables for GPIO lookup | |
[ 3.867850] omap_rtc 44e3e000.rtc: No GPIO consumer wp found | |
[ 3.874397] i2c /dev entries driver | |
[ 3.881680] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
[ 3.889275] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
[ 3.898823] ti-cpufreq ti-cpufreq: no of_node; not parsing pinctrl DT | |
[ 3.905696] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT | |
[ 3.912350] cpuidle: enable-method property 'ti,am3352' found operations | |
[ 3.920484] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0x160 value: 0x2f | |
[ 3.928420] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0xfc value: 0x30 | |
[ 3.936224] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0xf8 value: 0x30 | |
[ 3.944026] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0xf4 value: 0x30 | |
[ 3.951826] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0xf0 value: 0x30 | |
[ 3.959627] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0x104 value: 0x30 | |
[ 3.967515] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0x100 value: 0x30 | |
[ 3.975403] pinctrl-single 44e10800.pinmux: pinmux-mmc0-pins index: 0x1a0 value: 0x2c | |
[ 3.983318] pinctrl core: add 1 pinctrl maps | |
[ 3.987653] pinctrl-single 44e10800.pinmux: found group selector 4 for pinmux-mmc0-pins | |
[ 3.995723] pinctrl-single 44e10800.pinmux: request pin 88 (PIN88) for 48060000.mmc | |
[ 4.003434] pinctrl-single 44e10800.pinmux: request pin 63 (PIN63) for 48060000.mmc | |
[ 4.011141] pinctrl-single 44e10800.pinmux: request pin 62 (PIN62) for 48060000.mmc | |
[ 4.018847] pinctrl-single 44e10800.pinmux: request pin 61 (PIN61) for 48060000.mmc | |
[ 4.026633] pinctrl-single 44e10800.pinmux: request pin 60 (PIN60) for 48060000.mmc | |
[ 4.034351] pinctrl-single 44e10800.pinmux: request pin 65 (PIN65) for 48060000.mmc | |
[ 4.042065] pinctrl-single 44e10800.pinmux: request pin 64 (PIN64) for 48060000.mmc | |
[ 4.049774] pinctrl-single 44e10800.pinmux: request pin 104 (PIN104) for 48060000.mmc | |
[ 4.057662] pinctrl-single 44e10800.pinmux: enabling (null) function4 | |
[ 4.064370] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd | |
[ 4.070437] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup | |
[ 4.077062] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' - status (0) | |
[ 4.090947] gpio gpiochip0: Persistence not supported for GPIO 6 | |
[ 4.097020] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) | |
[ 4.105774] omap_hsmmc 48060000.mmc: Got CD GPIO | |
[ 4.110432] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp | |
[ 4.116481] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup | |
[ 4.123086] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
[ 4.136220] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@60000/mmc@0[0]' | |
[ 4.149251] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup | |
[ 4.156001] omap_hsmmc 48060000.mmc: No GPIO consumer wp found | |
[ 4.188147] omap_hsmmc 47810000.mmc: GPIO lookup for consumer cd | |
[ 4.194323] omap_hsmmc 47810000.mmc: using device tree for GPIO lookup | |
[ 4.200955] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/target-module@47810000/mmc@0[0]' | |
[ 4.211591] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/target-module@47810000/mmc@0[0]' | |
[ 4.222123] omap_hsmmc 47810000.mmc: using lookup tables for GPIO lookup | |
[ 4.228900] omap_hsmmc 47810000.mmc: No GPIO consumer cd found | |
[ 4.234812] omap_hsmmc 47810000.mmc: GPIO lookup for consumer wp | |
[ 4.240914] omap_hsmmc 47810000.mmc: using device tree for GPIO lookup | |
[ 4.247557] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/target-module@47810000/mmc@0[0]' | |
[ 4.258211] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/target-module@47810000/mmc@0[0]' | |
[ 4.268770] omap_hsmmc 47810000.mmc: using lookup tables for GPIO lookup | |
[ 4.275547] omap_hsmmc 47810000.mmc: No GPIO consumer wp found | |
[ 4.281776] omap_hsmmc 47810000.mmc: RX DMA channel request failed | |
[ 4.289105] pinctrl-single 44e10800.pinmux: pinmux-usr-leds-pins index: 0x54 value: 0xf | |
[ 4.297340] pinctrl-single 44e10800.pinmux: pinmux-usr-leds-pins index: 0x58 value: 0xf | |
[ 4.305479] pinctrl-single 44e10800.pinmux: pinmux-usr-leds-pins index: 0x5c value: 0xf | |
[ 4.313618] pinctrl-single 44e10800.pinmux: pinmux-usr-leds-pins index: 0x60 value: 0xf | |
[ 4.321873] pinctrl core: add 1 pinctrl maps | |
[ 4.326250] pinctrl-single 44e10800.pinmux: found group selector 5 for pinmux-usr-leds-pins | |
[ 4.334675] pinctrl-single 44e10800.pinmux: request pin 21 (PIN21) for leds | |
[ 4.341717] pinctrl-single 44e10800.pinmux: request pin 22 (PIN22) for leds | |
[ 4.348759] pinctrl-single 44e10800.pinmux: request pin 23 (PIN23) for leds | |
[ 4.355794] pinctrl-single 44e10800.pinmux: request pin 24 (PIN24) for leds | |
[ 4.362809] pinctrl-single 44e10800.pinmux: enabling (null) function5 | |
[ 4.369454] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/usr0[0]' - status (0) | |
[ 4.378589] gpio gpiochip1: Persistence not supported for GPIO 21 | |
[ 4.384908] no flags found for gpios | |
[ 4.388755] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/usr1[0]' - status (0) | |
[ 4.397847] gpio gpiochip1: Persistence not supported for GPIO 22 | |
[ 4.404021] no flags found for gpios | |
[ 4.407822] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/usr2[0]' - status (0) | |
[ 4.416950] gpio gpiochip1: Persistence not supported for GPIO 23 | |
[ 4.423154] no flags found for gpios | |
[ 4.426964] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/usr3[0]' - status (0) | |
[ 4.436093] gpio gpiochip1: Persistence not supported for GPIO 24 | |
[ 4.442267] mmc0: host does not support reading read-only switch, assuming write-enable | |
[ 4.450331] no flags found for gpios | |
[ 4.454429] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 4.461402] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
[ 4.467424] mmc0: new high speed SDHC card at address aaaa | |
[ 4.473276] omap-aes 53500000.aes: will run requests pump with realtime priority | |
[ 4.481012] mmcblk mmc0:aaaa: no of_node; not parsing pinctrl DT | |
[ 4.488461] mmcblk0: mmc0:aaaa SC16G 14.8 GiB | |
[ 4.498073] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
[ 4.504359] mmcblk0: p1 | |
[ 4.514161] hid: raw HID events driver (C) Jiri Kosina | |
[ 4.519999] usbcore: registered new interface driver usbhid | |
[ 4.525981] usbhid: USB HID core driver | |
[ 4.530387] remoteproc remoteproc0: wkup_m3 is available | |
[ 4.541098] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT | |
[ 4.549224] drop_monitor: Initializing network drop monitor service | |
[ 4.556595] NET: Registered protocol family 10 | |
[ 4.564914] Segment Routing with IPv6 | |
[ 4.568915] mip6: Mobile IPv6 | |
[ 4.572019] NET: Registered protocol family 17 | |
[ 4.576685] can: controller area network core (rev 20170425 abi 9) | |
[ 4.583161] NET: Registered protocol family 29 | |
[ 4.587960] Key type dns_resolver registered | |
[ 4.592373] mpls_gso: MPLS GSO support | |
[ 4.596462] ThumbEE CPU extension supported. | |
[ 4.600784] Registering SWP/SWPB emulation handler | |
[ 4.605622] omap_voltage_late_init: Voltage driver support not added | |
[ 4.612281] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
[ 4.618147] PM: Cannot get wkup_m3_ipc handle | |
[ 4.623183] registered taskstats version 1 | |
[ 4.627391] Loading compiled-in X.509 certificates | |
[ 4.632442] zswap: loaded using pool lzo/zbud | |
[ 4.637486] Key type ._fscrypt registered | |
[ 4.641602] Key type .fscrypt registered | |
[ 4.645561] Key type fscrypt-provisioning registered | |
[ 4.654343] Btrfs loaded, crc32c=crc32c-generic | |
[ 4.659175] AppArmor: AppArmor sha1 policy hashing enabled | |
[ 4.680415] pinctrl-single 44e10800.pinmux: pinmux-i2c0-pins index: 0x188 value: 0x30 | |
[ 4.688414] pinctrl-single 44e10800.pinmux: pinmux-i2c0-pins index: 0x18c value: 0x30 | |
[ 4.696349] pinctrl core: add 1 pinctrl maps | |
[ 4.700693] pinctrl-single 44e10800.pinmux: found group selector 6 for pinmux-i2c0-pins | |
[ 4.708768] pinctrl-single 44e10800.pinmux: request pin 98 (PIN98) for 44e0b000.i2c | |
[ 4.716479] pinctrl-single 44e10800.pinmux: request pin 99 (PIN99) for 44e0b000.i2c | |
[ 4.724191] pinctrl-single 44e10800.pinmux: enabling (null) function6 | |
[ 4.755982] tps65217-pmic tps65217-pmic: no of_node; not parsing pinctrl DT | |
[ 4.773462] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set | |
[ 4.780619] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 | |
[ 4.799382] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
[ 4.805229] at24 0-0050: supply vcc not found, using dummy regulator | |
[ 4.811792] at24 0-0050: GPIO lookup for consumer wp | |
[ 4.816810] at24 0-0050: using device tree for GPIO lookup | |
[ 4.822368] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/eeprom@50[0]' | |
[ 4.836731] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/eeprom@50[0]' | |
[ 4.851005] at24 0-0050: using lookup tables for GPIO lookup | |
[ 4.856712] at24 0-0050: No GPIO consumer wp found | |
[ 4.861956] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ 4.869031] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
[ 4.874899] pinctrl-single 44e10800.pinmux: pinmux-i2c2-pins index: 0x17c value: 0x33 | |
[ 4.882815] pinctrl-single 44e10800.pinmux: pinmux-i2c2-pins index: 0x178 value: 0x33 | |
[ 4.890745] pinctrl core: add 1 pinctrl maps | |
[ 4.895096] pinctrl-single 44e10800.pinmux: found group selector 7 for pinmux-i2c2-pins | |
[ 4.903167] pinctrl-single 44e10800.pinmux: request pin 95 (PIN95) for 4819c000.i2c | |
[ 4.910877] pinctrl-single 44e10800.pinmux: request pin 94 (PIN94) for 4819c000.i2c | |
[ 4.918587] pinctrl-single 44e10800.pinmux: enabling (null) function7 | |
[ 4.926188] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz | |
[ 4.933275] cpufreq-dt cpufreq-dt: no of_node; not parsing pinctrl DT | |
[ 4.939840] remoteproc remoteproc0: powering up wkup_m3 | |
[ 4.945930] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 | |
[ 4.956637] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
[ 4.962555] remoteproc remoteproc0: request_firmware failed: -2 | |
[ 4.968683] PM: Cannot get wkup_m3_ipc handle | |
[ 4.973102] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed | |
[ 4.979293] pm33xx pm33xx: no of_node; not parsing pinctrl DT | |
[ 4.985196] PM: Cannot get wkup_m3_ipc handle | |
[ 4.991664] ALSA device list: | |
[ 4.994663] No soundcards found. | |
[ 5.015235] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
[ 5.023542] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. | |
[ 5.040685] devtmpfs: mounted | |
[ 5.049615] Freeing unused kernel memory: 1024K | |
[ 5.054674] Run /sbin/init as init process | |
[ 5.058812] with arguments: | |
[ 5.061808] /sbin/init | |
[ 5.064538] with environment: | |
[ 5.067706] HOME=/ | |
[ 5.070073] TERM=linux | |
[ 5.091416] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. | |
[ 5.485287] systemd[1]: System time before build time, advancing clock. | |
[ 5.648860] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) | |
[ 5.667847] systemd[1]: Detected architecture arm. | |
Welcome to [1mDebian GNU/Linux 9 (stretch)[0m! | |
[ 5.698399] systemd[1]: Set hostname to <beaglebone>. | |
[ 6.382837] systemd[1]: Listening on Journal Audit Socket. | |
[[0;32m OK [0m] Listening on Journal Audit Socket. | |
[ 6.399862] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[[0;32m OK [0m] Started Forward Password Requests to Wall Directory Watch. | |
[ 6.424820] systemd[1]: Created slice System Slice. | |
[[0;32m OK [0m] Created slice System Slice. | |
[ 6.440542] systemd[1]: Listening on Syslog Socket. | |
[[0;32m OK [0m] Listening on Syslog Socket. | |
[ 6.455695] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[[0;32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe. | |
[ 6.480532] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[[0;32m OK [0m] Set up automount Arbitrary Executab…rmats File System Automount Point. | |
[ 6.508693] systemd[1]: Created slice system-getty.slice. | |
[[0;32m OK [0m] Created slice system-getty.slice. | |
[[0;32m OK [0m] Listening on udev Control Socket. | |
Mounting /sys/kernel/debug... | |
[[0;32m OK [0m] Reached target Remote File Systems. | |
[[0;32m OK [0m] Listening on udev Kernel Socket. | |
[[0;32m OK [0m] Reached target Swap. | |
Mounting POSIX Message Queue File System... | |
[[0;32m OK [0m] Created slice User and Session Slice. | |
[[0;32m OK [0m] Reached target Slices. | |
[[0;32m OK [0m] Created slice system-serial\x2dgetty.slice. | |
[[0;32m OK [0m] Listening on Journal Socket (/dev/log). | |
[[0;32m OK [0m] Started Dispatch Password Requests to Console Directory Watch. | |
[[0;32m OK [0m] Reached target Encrypted Volumes. | |
[[0;32m OK [0m] Reached target Paths. | |
[[0;32m OK [0m] Listening on Journal Socket. | |
Starting Journal Service... | |
Starting Create list of required st…ce nodes for the current kernel... | |
Starting Load Kernel Modules... | |
Starting Set the console keyboard layout... | |
[[0;32m OK [0m] Listening on fsck to fsckd communication Socket. | |
Starting File System Check on Root Device... | |
[[0;32m OK [0m] Mounted POSIX Message Queue File System. | |
[[0;32m OK [0m] Mounted /sys/kernel/debug. | |
[[0;32m OK [0m] Started Create list of required sta…vice nodes for the current kernel. | |
[[0;1;31mFAILED[0m] Failed to start Load Kernel Modules. | |
See 'systemctl status systemd-modules-load.service' for details. | |
[[0;1;33mDEPEND[0m] Dependency failed for robotcontrol. | |
[[0;32m OK [0m] Started File System Check Daemon to report status. | |
Mounting FUSE Control File System... | |
Mounting Configuration File System... | |
Starting Apply Kernel Variables... | |
Starting Create Static Device Nodes in /dev... | |
[[0;32m OK [0m] Mounted Configuration File System. | |
[[0;32m OK [0m] Mounted FUSE Control File System. | |
[[0;32m OK [0m] Started File System Check on Root Device. | |
[[0;32m OK [0m] Started Apply Kernel Variables. | |
Starting Remount Root and Kernel File Systems... | |
[[0;32m OK [0m] Started Create Static Device Nodes in /dev. | |
Starting udev Kernel Device Manager... | |
[ 7.794721] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro | |
[[0;32m OK [0m] Started Remount Root and Kernel File Systems. | |
Starting udev Coldplug all Devices... | |
Starting Load/Save Random Seed... | |
[[0;32m OK [0m] Started Load/Save Random Seed. | |
[[0;32m OK [0m] Started udev Kernel Device Manager. | |
[[0;32m OK [0m] Started Journal Service. | |
Starting Flush Journal to Persistent Storage... | |
[ 8.828310] systemd-journald[183]: Received request to flush runtime journal from PID 1 | |
[[0;32m OK [0m] Started Flush Journal to Persistent Storage. | |
[[0;32m OK [0m] Started Set the console keyboard layout. | |
[[0;32m OK [0m] Reached target Local File Systems (Pre). | |
[[0;32m OK [0m] Reached target Local File Systems. | |
Starting Raise network interfaces... | |
Starting Set console font and keymap... | |
Starting Create Volatile Files and Directories... | |
[[0;32m OK [0m] Started Set console font and keymap. | |
[[0;32m OK [0m] Started Create Volatile Files and Directories. | |
[[0;32m OK [0m] Started Entropy daemon using the HAVEGE algorithm. | |
Starting Update UTMP about System Boot/Shutdown... | |
Starting Network Time Synchronization... | |
[[0;32m OK [0m] Started Update UTMP about System Boot/Shutdown. | |
[[0;32m OK [0m] Started Network Time Synchronization. | |
[[0;32m OK [0m] Reached target System Time Synchronized. | |
[[0;32m OK [0m] Started Raise network interfaces. | |
[[0;32m OK [0m] Started udev Coldplug all Devices. | |
[[0;32m OK [0m] Reached target System Initialization. | |
[[0;32m OK [0m] Listening on Node-RED Socket. | |
[[0;32m OK [0m] Listening on D-Bus System Message Bus Socket. | |
[[0;32m OK [0m] Listening on bonescript.socket. | |
[[0;32m OK [0m] Started Daily Cleanup of Temporary Directories. | |
[[0;32m OK [0m] Reached target Timers. | |
[[0;32m OK [0m] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
[[0;32m OK [0m] Listening on cloud9.socket. | |
[[0;32m OK [0m] Reached target Sockets. | |
[[0;32m OK [0m] Reached target Basic System. | |
Starting Avahi mDNS/DNS-SD Stack... | |
Starting Login Service... | |
Starting LSB: Start busybox udhcpd at boot time... | |
Starting LSB: Start daemon at boot time... | |
[[0;32m OK [0m] Started D-Bus System Message Bus. | |
[[0;32m OK [0m] Started Avahi mDNS/DNS-SD Stack. | |
Starting Connection service... | |
Starting LSB: Start daemon at boot time... | |
Starting LSB: Load kernel modules needed to enable cpufreq scaling... | |
Starting BBAI brcmfmac tether Service... | |
[[0;32m OK [0m] Started Bonescript autorun. | |
[[0;32m OK [0m] Started Deferred execution scheduler. | |
Starting BB WL18xx wlan0 Service... | |
Starting System Logging Service... | |
[[0;32m OK [0m] Started Regular background program processing daemon. | |
Starting rc_battery_monitor... | |
[[0;32m OK [0m] Started System Logging Service. | |
[[0;32m OK [0m] Started rc_battery_monitor. | |
[[0;32m OK [0m] Started BB WL18xx wlan0 Service. | |
[[0;32m OK [0m] Started BBAI brcmfmac tether Service. | |
[[0;32m OK [0m] Started LSB: Start busybox udhcpd at boot time. | |
[[0;32m OK [0m] Started LSB: Start daemon at boot time. | |
[[0;32m OK [0m] Started LSB: Start daemon at boot time. | |
[[0;32m OK [0m] Started Connection service. | |
[[0;32m OK [0m] Started Login Service. | |
Starting Hostname Service... | |
Starting WPA supplicant... | |
[[0;32m OK [0m] Started WPA supplicant. | |
[[0;32m OK [0m] Reached target Network. | |
[[0;32m OK [0m] Reached target Network is Online. | |
Starting LSB: Advanced IEEE 802.11 management daemon... | |
Starting A high performance web server and a reverse proxy server... | |
Starting OpenBSD Secure Shell server... | |
Starting Generic Board Startup... | |
Starting Permit User Sessions... | |
[[0;32m OK [0m] Started LSB: Advanced IEEE 802.11 management daemon. | |
[[0;32m OK [0m] Started Hostname Service. | |
[[0;32m OK [0m] Started Permit User Sessions. | |
[[0;32m OK [0m] Started LSB: Load kernel modules needed to enable cpufreq scaling. | |
Starting LSB: set CPUFreq kernel parameters... | |
[[0;32m OK [0m] Started Getty on tty1. | |
[[0;32m OK [0m] Started OpenBSD Secure Shell server. | |
[[0;32m OK [0m] Started LSB: set CPUFreq kernel parameters. | |
[[0;32m OK [0m] Started A high performance web server and a reverse proxy server. | |
[ 18.923409] using random self ethernet address | |
[ 18.931193] using random host ethernet address | |
[ 19.371414] using random self ethernet address | |
[ 19.380802] using random host ethernet address | |
[ 19.679185] usb0: HOST MAC 1c:ba:8c:a2:ed:6c | |
[ 19.708004] usb0: MAC 1c:ba:8c:a2:ed:70 | |
[ 19.734600] usb1: HOST MAC 1c:ba:8c:a2:ed:6c | |
[ 19.764732] usb1: MAC 1c:ba:8c:a2:ed:6d | |
[ 20.543045] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready | |
[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (3 of 3) A start job is running for dev-ttyS0.device (31s / 1min 30s) | |
[K[[0;32m OK [0m] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
[[0;32m OK [0m] Found device /dev/ttyGS0. | |
[[0;32m OK [0m] Started Serial Getty on ttyGS0. | |
[[0;32m OK [0m] Started Generic Board Startup. | |
[[0;32m OK [0m] Found device /dev/ttyS0. | |
[[0;32m OK [0m] Started Serial Getty on ttyS0. | |
[[0;32m OK [0m] Reached target Login Prompts. | |
Starting BB WL18xx Bluetooth Service... | |
Debian GNU/Linux 9 beaglebone ttyS0 | |
BeagleBoard.org Debian Image 2019-12-01 | |
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian | |
default username:password is [debian:temppwd] | |
beaglebone login: |
Author
pdp7
commented
May 29, 2020
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment