diff -ur SDInstall/config.txt SDInstall_DMG/config.txt
--- SDInstall/config.txt 2022-03-24 16:13:42.000000000 -0700
+++ SDInstall_DMG/config.txt 2021-01-01 14:18:02.000000000 -0800
@@ -11,15 +11,14 @@
#over_voltage=6
#hdmi_enable_4kp60=1
-gpu_mem=512
-initial_turbo=60
site: |
#!/bin/bash | |
# !!WARNING!! | |
# This will DELETE all efforts you have put into configuring nix | |
# Have a look through everything that gets deleted / copied over | |
nix-env -e '.*' | |
rm -rf $HOME/.nix-* | |
rm -rf $HOME/.config/nixpkgs |
#!/usr/bin/php -d open_basedir=/usr/syno/bin/ddns | |
<?php | |
/* | |
Usage Instructions ( Obviously your domain has to be hosted on Namecheap ) | |
1) Copy this file to /usr/syno/bin/ddns/namecheap.php | |
2) Add the following entry in /etc.defaults/ddns_provider.conf | |
[Custom - Namecheap] | |
modulepath=/usr/syno/bin/ddns/namecheap.php |
128676 [Thread-3] INFO com.fs.starfarer.campaign.save.CampaignGameManager - Error loading | |
128676 [Thread-3] ERROR com.fs.starfarer.campaign.save.CampaignGameManager - Failed calling method | |
---- Debugging information ---- | |
message : Failed calling method | |
cause-exception : java.lang.NullPointerException | |
cause-message : null | |
method : com.fs.starfarer.campaign.fleet.FleetMember.readResolve() | |
class : com.fs.starfarer.campaign.fleet.FleetMember | |
required-type : com.fs.starfarer.campaign.fleet.FleetMember | |
converter-type : com.thoughtworks.xstream.converters.reflection.ReflectionConverter |
{ | |
"plugins":{ | |
"newGameSectorProcGen":"data.scripts.SectorProcGenMod", | |
"newGameCreationEntryPoint":"data.scripts.world.SectorGenMod", | |
}, | |
#Change the number below to increase or decrease the size of the Sector | |
#"sectorWidth":164000, | |
#"sectorHeight":104000, | |
#"sectorConstellationSize":100, |
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int