pepe2k/xiaomi_mijia_360_uart_bootlog

## xiaomi_mijia_360_uart_bootlog
             ___  ___  _________                _
            / _ \ |  \/  || ___ \              | |
           / /_\ \| .  . || |_/ /  ___    ___  | |_
           |  _  || |\/| || ___ \ / _ \  / _ \ | __|
           | | | || |  | || |_/ /| (_) || (_) || |_
           \_| |_/\_|  |_/\____/  \___/  \___/  \__|
----------------------------------------------------------
Amboot(R) Ambarella(R) Copyright (C) 2004-2014
Boot From: NAND 2048 RC BCH 6bit
SYS_CONFIG: 0x3007009A POC: 101
Cortex freq: 600000000
iDSP freq: 144000000
Dram freq: 528000000
Core freq: 144000000
AHB freq: 72000000
APB freq: 36000000
UART freq: 24000000
SD freq: 48000000
SDIO freq: 48000000
SDXC freq: 48000000
amboot> boot console=ttyS0 ubi.mtd=add root=ubi0:rootfs rw rootfstype=ubifs init=/linuxrcfdt is in the PTB block
CmdLine :
kernel cur : 00000002
linux cur : 00000002
update flag : 00000010
fail cnt : 00000000
bst: 0xF94307F5 1.3     (2016/7/12)     0x00000000 0x00000001 (2048)
bld: 0xD1E8C97A 1.3     (2016/7/12)     0x00000000 0x00000000 (177052)
pri: 0x3AED7285 0.1     (2016/7/12)     0x00208000 0x00000000 (5426960)
sec: 0x3AED7285 0.1     (2016/7/12)     0x00208000 0x00000000 (5426960)
rmd: 0x108D199D 0.1     (2016/7/12)     0x00000000 0x00000001 (2097152)
add: 0xF8322F82 0.1     (2016/7/12)     0x00000000 0x00000001 (59375616)

#####Print FDT MAGIC#####
D00DFEED#########################
$$$$$$$$$$$$$No Update$$$$$$$$$$$$
kernel sec load******
loading sec to 0x00208000
kernel ram addr : 00208000
rmd has no-load flag set... skipping
Jumping to 0x00208000 ...
cmdline: console=ttyS0 ubi.mtd=add root=ubi0:rootfs rw rootfstype=ubifs init=/linuxrcfdt is in the PTB block
cpux_jump: 0x00000000
initrd2_start: 0x00000000 initrd2_size: 0x00000000
kernelp: 0x00200000 kernels: 0x06A00000
idspp: 0x06C00000 idsps: 0x09400000
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.10.50 (version@ubuntu) (gcc version 4.9.1 20140625 (prerelease) (crosstool-NG - Ambarella Linaro Multilib GCC [CortexA9 & ARMv6k] 2014.06) ) #1 PREEMPT Tue Jul 12 17:10:16 CST 2016
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Ambarella S2L (Flattened Device Tree), model: Ambarella S2LM Ipc002 Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Ambarella:      AHB = 0xe0000000[0xe0000000],0x01000000 0
[    0.000000] Ambarella:      APB = 0xe8000000[0xe8000000],0x01000000 0
[    0.000000] Ambarella:      PPM = 0x00000000[0xdfe00000],0x00200000 9
[    0.000000] Ambarella:      AXI = 0xf0000000[0xf0000000],0x00030000 0
[    0.000000] Ambarella:    DRAMC = 0xdffe0000[0xef000000],0x00020000 0
[    0.000000] Ambarella:   DBGBUS = 0xec000000[0xec000000],0x00200000 0
[    0.000000] Ambarella:  DBGFMEM = 0xee000000[0xee000000],0x01000000 0
[    0.000000] Ambarella:   IAVMEM = 0x06c00000[          ],0x09400000
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 26924
[    0.000000] Kernel command line: console=ttyS0 ubi.mtd=add root=ubi0:rootfs rw rootfstype=ubifs init=/linuxrcfdt is in the PTB block
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 106MB = 106MB total
[    0.000000] Memory: 102028k/102028k available, 6516k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0x87000000 - 0xff000000   (1920 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x86a00000   ( 106 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x804d7f1c   (4928 kB)
[    0.000000]       .init : 0x804d8000 - 0x804fba4c   ( 143 kB)
[    0.000000]       .data : 0x804fc000 - 0x80534f10   ( 228 kB)
[    0.000000]        .bss : 0x80534f10 - 0x80555438   ( 130 kB)
[    0.000000] NR_IRQS:240
[    0.000000] sched_clock: 32 bits at 36MHz, resolution 27ns, wraps every 119304ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.234934] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.292609] pid_max: default: 32768 minimum: 301
[    0.297297] Mount-cache hash table entries: 512
[    0.304266] CPU: Testing write buffer coherency: ok
[    0.309411] Setting up static identity map for 0x80395e68 - 0x80395ed8
[    0.318343] devtmpfs: initialized
[    0.323123] pinctrl core: initialized pinctrl subsystem
[    0.328554] NET: Registered protocol family 16
[    0.333810] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.341246] L310 cache controller enabled
[    0.345248] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32020000, Cache size: 131072 B
[    0.354752] ambarella-pinctrl e8009000.pinctrl: Ambarella pinctrl driver registered
[    0.362784] ambarella-gpio gpio.0: Ambarella GPIO driver registered
[    0.373205] bio: create slab <bio-0> at 0
[    0.378371] ambarella-dma e0005000.dma: Ambarella DMA Engine
[    0.385540] ambarella-i2c e8003000.i2c: Ambarella I2C adapter[0] probed!
[    0.392603] Advanced Linux Sound Architecture Driver Initialized.
[    0.399829] Switching to clocksource ambarella-cs-timer
[    0.405134] cfg80211: Calling CRDA to update world regulatory domain
[    0.419509] ambarella-sd e0002000.sdmmc0: Slot0 use bounce buffer[0x86340000<->0x06540000]
[    0.427824] ambarella-sd e0002000.sdmmc0: Slot0 req_size=0x00020000, segs=32, seg_size=0x00020000
[    0.436692] ambarella-sd e0002000.sdmmc0: Slot0 use ADMA
[    0.521639] ambarella-sd e0002000.sdmmc0: 1 slots @ 24000000Hz
[    0.527617] NET: Registered protocol family 2
[    0.532521] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.539487] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.546890] TCP: Hash tables configured (established 1024 bind 1024)
[    0.553302] TCP: reno registered
[    0.556522] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.562366] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.568793] NET: Registered protocol family 1
[    0.573445] RPC: Registered named UNIX socket transport module.
[    0.579346] RPC: Registered udp transport module.
[    0.584080] RPC: Registered tcp transport module.
[    0.588763] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.595617] ambarella-adc e801d000.adc: Ambarella ADC driver init
[    0.603358] msgmni has been set to 199
[    0.608330] NET: Registered protocol family 38
[    0.612968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.620345] io scheduler noop registered
[    0.624326] io scheduler deadline registered
[    0.628590] io scheduler cfq registered (default)
[    0.634334] e8005000.uart: ttyS0 at MMIO 0xe8005000 (irq = 9) is a ambuart
[    0.642116] brd: module loaded
[    0.647874] loop: module loaded
[    0.653674] ambarella-nand e0001000.nand: in ecc-[6]bit mode
[    0.659318] ambarella_nand: Use On Flash BBT
[    0.663682] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xda (Unknown NAND 256MiB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64
[    0.675905] Bad block table found at page 131008, version 0x01
[    0.681902] Bad block table found at page 130944, version 0x01
[    0.687983] 10 ofpart partitions found on MTD device amba_nand
[    0.693818] Creating 10 MTD partitions on "amba_nand":
[    0.698939] 0x000000000000-0x000000020000 : "bst"
[    0.704497] 0x000000020000-0x000000160000 : "bld"
[    0.709973] 0x000000160000-0x0000002a0000 : "ptb"
[    0.715393] 0x0000002a0000-0x0000008a0000 : "pri"
[    0.720748] 0x0000008a0000-0x000000ea0000 : "sec"
[    0.726187] 0x000000ea0000-0x0000014a0000 : "rmd"
[    0.731628] 0x0000014a0000-0x0000078a0000 : "lnx"
[    0.737132] 0x0000078a0000-0x000007ea0000 : "swp"
[    0.742605] 0x000007ea0000-0x00000e2a0000 : "add"
[    0.748100] 0x00000e2a0000-0x00000f6a0000 : "adc"
[    0.754210] ambarella-spi e0020000.spi: Ambarella spi controller 0 created.
[    0.761513] ambarella-rtc e8015000.rtc: =====RTC ever lost power=====
[    0.841802] ambarella-rtc e8015000.rtc: rtc core: registered rtc-ambarella as rtc0
[    0.849476] i2c /dev entries driver
[    0.853566] ambarella-wdt e800c000.wdt: Ambarella Watchdog Timer Probed.
[    0.861241] snd_soc_card_s2lmkiwi sound.2: ASoC: CODEC (null) not registered
[    0.868350] snd_soc_card_s2lmkiwi sound.2: snd_soc_register_card failed (-517)
[    0.875587] platform sound.2: Driver snd_soc_card_s2lmkiwi requests probe deferral
[    0.883321] dbg: rt5670_i2c_probe line 4157
[    0.887751] TCP: cubic registered
[    0.891049] Initializing XFRM netlink socket
[    0.895345] NET: Registered protocol family 17
[    0.899886] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.907540] ThumbEE CPU extension supported.
[    0.912998] dbg: rt5670_probe line 3921
[    0.916820] Codec driver version 0.0.7 alsa 1.0.25
[    1.932693] v_id = 5
[    1.980044] rt5670 0-001c: ASoC: no source widget found for I2S1 ASRC
[    1.986509] rt5670 0-001c: ASoC: Failed to add route I2S1 ASRC -> direct -> I2S1
[    1.993922] rt5670 0-001c: ASoC: no source widget found for I2S2 ASRC
[    2.000340] rt5670 0-001c: ASoC: Failed to add route I2S2 ASRC -> direct -> I2S2
[    2.009847] rt5670 0-001c: ASoC: no source widget found for I2S2 ASRC
[    2.016295] rt5670 0-001c: ASoC: Failed to add route I2S2 ASRC -> direct -> I2S DSP
[    2.028037] rt5670 0-001c: ASoC: mux Mono ADC R Mux has no paths
[    2.034106] rt5670 0-001c: ASoC: mux Mono ADC L Mux has no paths
[    2.040884] rt5670 0-001c: ASoC: mux INR Mux has no paths
[    2.046307] rt5670 0-001c: ASoC: mux INL Mux has no paths
[    2.054647] snd_soc_card_s2lmkiwi sound.2:  rt5670-aif1 <-> e001a000.i2s mapping ok
[    2.063960] UBI: attaching mtd8 to ubi0
[    2.315620] UBI: scanning is finished
[    2.325096] UBI: attached mtd8 (name "add", size 100 MiB) to ubi0
[    2.331174] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.337991] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.344684] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.351544] UBI: good PEBs: 800, bad PEBs: 0, corrupted PEBs: 0
[    2.357440] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    2.364560] UBI: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1198872225
[    2.373587] UBI: available PEBs: 0, total reserved PEBs: 800, PEBs reserved for bad PEB handling: 40
[    2.382708] UBI: background thread "ubi_bgt0d" started, PID 41
[    2.388565] ambarella-rtc e8015000.rtc: setting system clock to 1970-01-01 00:00:02 UTC (2)
[    2.396992] ALSA device list:
[    2.399945]   #0: rt5670 @ S2LMKIWI
[    2.404511] UBIFS: background thread "ubifs_bgt0_0" started, PID 42
[    2.430968] UBIFS: recovery needed
[    2.483870] UBIFS: recovery completed
[    2.487708] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.493781] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.502909] UBIFS: FS size: 94597120 bytes (90 MiB, 745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.512543] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.517579] UBIFS: media format: w4/r0 (latest is w4/r0), UUID AD4D90C4-8521-4D34-A632-4EC231851103, small LPT model
[    2.529014] VFS: Mounted root (ubifs filesystem) on device 0:12.
[    2.536254] devtmpfs: mounted
[    2.539383] Freeing unused kernel memory: 140K (804d8000 - 804fb000)
[    2.545980] Failed to execute /linuxrcfdt.  Attempting defaults...

Welcome to Linux!

         Expecting device dev-ttyS0.device...
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Swap.
[  OK  ] Created slice Root Slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting POSIX Message Queue File System...
         Starting Create list of required static device nodes...rrent kernel...
         Starting udev Coldplug all Devices...
         Mounting Debug File System...
         Starting Setup Virtual Console...
         Starting Load Kernel Modules...
         Starting Apply Ambarella Specific Kernel Variables...
         Starting Journal Service...
[  OK  ] Started Journal Service.
[  OK  ] Reached target Slices.
         Starting Remount Root and Kernel File Systems...
         Mounting Temporary Directory...
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Create list of required static device nodes ...current kernel.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Apply Ambarella Specific Kernel Variables.
[  OK  ] Mounted Temporary Directory.
[    3.385970] dsp: module license 'Proprietary' taints kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[    3.406245] Disabling lock debugging due to kernel taint
[    3.465916] IT66121 inited
[    3.496056] Vout notice: vout0:0 probed!
[    3.500321] Vout notice: vout1:1 probed!
[  OK  ] Started udev Coldplug all Devices.
[    3.577497] VIN: vin0: probed!
[    3.580547] VIN: vin1: probed!
[    3.604559] amba_debug_init 248:248.
[    3.615412] Vout notice: CVBS:0@1 probed!
[    3.638664] Vout notice: DBus-All:1@0 probed!
[    3.648284] Vout notice: DBus-LCD:2@1 probed!
[  OK  ] Started Load Kernel Modules.
         Mounting Configuration File System...
         Starting Load/Save Random Seed...
         Starting Apply Kernel Variables...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
[    4.074069] systemd-udevd[87]: starting version 215
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting Create Volatile Files and Directories...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[    4.335719] systemd-journald[58]: Received request to flush runtime journal from PID 1
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[    4.436989] ambarella-udc e0006000.udc: ambarella_udc: version 2 August 2011
[    4.480075] rt5670_dsp_fw_loaded
[    4.502309] ambarella-spi-slave e0026000.spi_slave: Ambarella SPI Slave Controller 0 created!
[  OK  ] Found device /dev/ttyS0.
[    4.572989] ambarella-crypto f0020000.crypto: Ambarella Media Processor Cryptography Engine probed(interrupt mode).
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on Journal Gateway Service Socket.
[  OK  ] Listening on Telnet Server Activation Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
         Starting Restore Sound Card State...
[  OK  ] Reached target Basic System.
         Starting Network Name Resolution...
         Starting /etc/rc.local Compatibility...
         Starting Login Service...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
         Starting PulseAudio Sound System...
         Starting Permit User Sessions...
[  OK  ] Started Network Name Resolution.
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started /etc/rc.local Compatibility.
[    5.585864] UBI: attaching mtd9 to ubi1
[  OK  ] Started Permit User Sessions.
[    5.670889] UBI: scanning is finished
         Starting Serial Getty on ttyS0...
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[    5.723659] UBI: attached mtd9 (name "adc", size 20 MiB) to ubi1
[    5.731021] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.741348] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[  OK  ][    5.753800] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
 Started Login S[    5.761170] UBI: good PEBs: 160, bad PEBs: 0, corrupted PEBs: 0
ervice.
[    5.769031] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.776646] UBI: max/mean erase counter: 46/31, WL threshold: 4096, image sequence number: 1601197842
[    5.788871] UBI: available PEBs: 33, total reserved PEBs: 127, PEBs reserved for bad PEB handling: 40
[    5.798453] UBI: background thread "ubi_bgt1d" started, PID 137
[    5.877509] UBI error: ubi_create_volume: volume 0 already exists
[    5.891615] UBI error: ubi_create_volume: cannot create volume 0, error -17
[    5.925464] UBIFS: background thread "ubifs_bgt1_0" started, PID 140
[    6.001857] UBIFS: mounted UBI device 1, volume 0, name "usr_a"
[    6.007887] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.017284] UBIFS: FS size: 9269248 bytes (8 MiB, 73 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    6.026736] UBIFS: reserved for root: 437809 bytes (427 KiB)
[    6.032858] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 82CD7518-177F-42F4-B98B-FEAC4DA33DF9, small LPT model
[    6.184178] enter rt5670_shutdown
[    6.189056] enter rt5670_shutdown
[    6.198008] enter rt5670_shutdown
[    6.204272] enter rt5670_shutdown
[    6.896131] Vout error: ambhdmi_probe, 601
[    6.931580] SYSCLK:SO[74175824]
[    8.516011] rt5670 0-001c: AEC
[    8.809560] enter rt5670_shutdown
[    8.829881] enter rt5670_shutdown
[    8.834924] enter rt5670_shutdown
[    8.840087] enter rt5670_shutdown
[    8.847144] enter rt5670_shutdown
[    8.853495] enter rt5670_shutdown
[    8.857996] enter rt5670_shutdown
[    8.863364] enter rt5670_shutdown
[    8.869039] enter rt5670_shutdown
[    8.931718] rt5670_hp_power_event SND_SOC_DAPM_POST_PMU
[    9.024684] VIN: OV4689 init(4-lane mipi)
[    9.128512] usbcore: registered new interface driver usbfs
[    9.135420] usbcore: registered new interface driver hub
[    9.142279] usbcore: registered new device driver usb
[    9.165854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.172779] ambarella-ehci e0018000.ehci: EHCI Host Controller
[    9.178675] ambarella-ehci e0018000.ehci: new USB bus registered, assigned bus number 1
[    9.188326] ambarella-ehci e0018000.ehci: irq 39, io mem 0xe0018000
[    9.211572] ambarella-ehci e0018000.ehci: USB 2.0 started, EHCI 1.00
[    9.218022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.225832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.233334] usb usb1: Product: EHCI Host Controller
[    9.238206] usb usb1: Manufacturer: Linux 3.10.50 ehci_hcd
[    9.244031] usb usb1: SerialNumber: AmbUSB
[    9.254702] hub 1-0:1.0: USB hub found
[    9.258481] hub 1-0:1.0: 2 ports detected
[    9.280013] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.372609] rt5670 0-001c: AEC
[    9.581576] usb 1-2: new high-speed USB device number 2 using ambarella-ehci
[    9.734089] usb 1-2: New USB device found, idVendor=1286, idProduct=2049
[    9.740795] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.749364] usb 1-2: Product: Marvell Wireless Device
[    9.755036] usb 1-2: Manufacturer: Marvell
[    9.759160] usb 1-2: SerialNumber: 0000000000000000
[    9.771398] enter rt5670_shutdown
[    9.782157] enter rt5670_shutdown
[  OK  ] Started PulseAudio Sound System.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Sound Card.


Welcome to Ambarella
Ambarella login: root (automatic login)

# [   11.396159] wlan: Loading MWLAN driver
[   11.400497] VID/PID = 1286/2049, Boot2 version = 4000
[   11.406010] rx_work=0 cpu_num=1
[   11.806463] WLAN FW is downloaded
[   12.003023] usb 1-2: USB disconnect, device number 2
[   12.322025] usb_reset_device() successful.
[   12.327890] usbcore: registered new interface driver usb8xxx
[   12.338520] wlan: Driver loaded successfully
[   12.611595] usb 1-2: new high-speed USB device number 3 using ambarella-ehci
[   12.762602] usb 1-2: New USB device found, idVendor=1286, idProduct=204a
[   12.769474] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.777141] usb 1-2: Product: Marvell Wireless Device
[   12.782616] usb 1-2: Manufacturer: Marvell
[   12.786859] usb 1-2: SerialNumber: 00504302FE01
[   12.800141] VID/PID = 1286/204A, Boot2 version = 3117
[   12.805934] rx_work=0 cpu_num=1
[   12.811760] WLAN FW is active
[   12.840484] fw_cap_info=0xbab, dev_cap_mask=0xffffffff
[   12.871411] wlan: version = USB8801-14.68.36.p93-C3X14C118-GPL-(FP68)
[   14.984113] enter rt5670_shutdown
[   14.995268] enter rt5670_shutdown
[   18.005408] Vout info: CVBS-0 switch to mode 131072!
[   18.010447] SYSCLK:VOUT[27000000]
[   18.014062] ambarella_vout_clk_set_rate: rate = 27000000
[   18.133602] VIN: 4 lane 4M
[   18.136344] VIN: Linear mode
[   65.111095] wlan: SCAN COMPLETED: scanned AP count=1
[   65.121540] supplicantQueryPassphraseAndEnable RSNEnabled=0 ssid=Yennefer
[   65.409189] wlan: mlan0 START SCAN
[   67.059061] wlan: SCAN COMPLETED: scanned AP count=3
[   67.328542] wlan: mlan0 START SCAN
[   68.979382] wlan: SCAN COMPLETED: scanned AP count=3
[   71.869917] wlan: mlan0 START SCAN
[   73.489570] wlan: SCAN COMPLETED: scanned AP count=3
[   73.511328] supplicantQueryPassphraseAndEnable RSNEnabled=0 ssid=Yennefer
[   73.522589] supplicantQueryPassphraseAndEnable RSNEnabled=0 ssid=Yennefer
[   73.546495] wlan: Connected to bssid 00:XX:XX:XX:b5:91 successfully

# uname -a
Linux Ambarella 3.10.50 #1 PREEMPT Tue Jul 12 17:10:16 CST 2016 armv7l GNU/Linux