Skip to content

Instantly share code, notes, and snippets.

@pequet
Created September 8, 2018 19:00
Show Gist options
  • Save pequet/10ee5d0a36f2a18bea07d72ce8ab9262 to your computer and use it in GitHub Desktop.
Save pequet/10ee5d0a36f2a18bea07d72ce8ab9262 to your computer and use it in GitHub Desktop.
# avrdude -p usb1286 -c arduino -U flash:w:pro_micro_ISP_B6_10.hex -v -P /dev/ttyACM0
avrdude: Version 6.3, compiled on Aug 9 2017 at 12:31:56
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/root/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyACM0
Using Programmer : arduino
AVR Part : AT90USB1286
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 10 8 0 no 4096 8 0 9000 9000 0x00 0x00
flash 65 6 256 0 yes 131072 256 512 4500 4500 0x00 0x00
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : Arduino
Description : Arduino
avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x15
avrdude: stk500_recv(): programmer is not responding
Hardware Version: 2
Firmware Version: 0.0
Topcard : Unknown
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9782 (probably usb1287)
avrdude: safemode: hfuse reads as 99
avrdude: safemode: efuse reads as F3
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "pro_micro_ISP_B6_10.hex"
avrdude: input file pro_micro_ISP_B6_10.hex auto detected as Intel Hex
avrdude: writing flash (5756 bytes):
Writing | ################################################## | 100% 2.42s
avrdude: 5756 bytes of flash written
avrdude: verifying flash memory against pro_micro_ISP_B6_10.hex:
avrdude: load data flash data from input file pro_micro_ISP_B6_10.hex:
avrdude: input file pro_micro_ISP_B6_10.hex auto detected as Intel Hex
avrdude: input file pro_micro_ISP_B6_10.hex contains 5756 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 1.75s
avrdude: verifying ...
avrdude: 5756 bytes of flash verified
avrdude: safemode: hfuse reads as 99
avrdude: safemode: efuse reads as F3
avrdude: safemode: Fuses OK (E:F3, H:99, L:5E)
avrdude done. Thank you.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment