Created
March 28, 2020 15:06
-
-
Save petruchito/82d2780239f819ac87cb56ef382d7f7e to your computer and use it in GitHub Desktop.
dmesg nexcom ndis-166
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Copyright (c) 1992-2019 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 12.1-RELEASE r354233 GENERIC amd64 | |
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) | |
VT(vga): resolution 640x480 | |
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2494.39-MHz K8-class CPU) | |
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 | |
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | |
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> | |
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> | |
AMD Features2=0x1<LAHF> | |
XSAVE Features=0x1<XSAVEOPT> | |
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID | |
TSC: P-state invariant, performance statistics | |
real memory = 17179869184 (16384 MB) | |
avail memory = 16508755968 (15743 MB) | |
Event timer "LAPIC" quality 600 | |
ACPI APIC Table: <ALASKA A M I> | |
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs | |
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads | |
random: unblocking device. | |
ioapic0 <Version 2.0> irqs 0-23 on motherboard | |
Launching APs: 1 2 3 | |
Timecounter "TSC-low" frequency 1247195662 Hz quality 1000 | |
random: entropy device external interface | |
000.000017 [4335] netmap_init netmap: loaded module | |
[ath_hal] loaded | |
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19 | |
kbd1 at kbdmux0 | |
nexus0 | |
vtvga0: <VT VGA driver> on motherboard | |
cryptosoft0: <software crypto> on motherboard | |
acpi0: <ALASKA A M I> on motherboard | |
acpi0: Power Button (fixed) | |
cpu0: <ACPI CPU> on acpi0 | |
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | |
Timecounter "HPET" frequency 14318180 Hz quality 950 | |
Event timer "HPET" frequency 14318180 Hz quality 550 | |
Event timer "HPET1" frequency 14318180 Hz quality 440 | |
Event timer "HPET2" frequency 14318180 Hz quality 440 | |
Event timer "HPET3" frequency 14318180 Hz quality 440 | |
Event timer "HPET4" frequency 14318180 Hz quality 440 | |
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 | |
atrtc0: Warning: Couldn't map I/O. | |
atrtc0: registered as a time-of-day clock, resolution 1.000000s | |
Event timer "RTC" frequency 32768 Hz quality 0 | |
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 | |
Timecounter "i8254" frequency 1193182 Hz quality 0 | |
Event timer "i8254" frequency 1193182 Hz quality 100 | |
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 | |
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 | |
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | |
pci0: <ACPI PCI bus> on pcib0 | |
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf5000000-0xf53fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 | |
vgapci0: Boot video device | |
pci0: <simple comms> at device 22.0 (no driver attached) | |
uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d26000-0xf7d26fff irq 19 at device 22.3 on pci0 | |
uart2: Using 1 MSI message | |
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d25000-0xf7d25fff irq 20 at device 25.0 on pci0 | |
em0: Using 1024 TX descriptors and 1024 RX descriptors | |
em0: Using an MSI interrupt | |
em0: Ethernet address: 00:10:f3:2a:8b:ac | |
em0: netmap queues/slots: TX 1/1024, RX 1/1024 | |
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7d24000-0xf7d243ff irq 16 at device 26.0 on pci0 | |
usbus0: EHCI version 1.0 | |
usbus0 on ehci0 | |
usbus0: 480Mbps High Speed USB v2.0 | |
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 | |
pcib1: [GIANT-LOCKED] | |
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 | |
pcib2: [GIANT-LOCKED] | |
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 | |
pcib3: [GIANT-LOCKED] | |
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 | |
pcib4: [GIANT-LOCKED] | |
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 | |
pci1: <ACPI PCI bus> on pcib5 | |
em1: <Intel(R) PRO/1000 Network Connection> port 0xa000-0xa01f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 16 at device 0.0 on pci1 | |
em1: Using 1024 TX descriptors and 1024 RX descriptors | |
em1: Using 2 RX queues 2 TX queues | |
em1: Using MSI-X interrupts with 3 vectors | |
em1: Ethernet address: 00:10:f3:2a:8b:ad | |
em1: netmap queues/slots: TX 2/1024, RX 2/1024 | |
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7d23000-0xf7d233ff irq 23 at device 29.0 on pci0 | |
usbus1: EHCI version 1.0 | |
usbus1 on ehci1 | |
usbus1: 480Mbps High Speed USB v2.0 | |
isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |
isa0: <ISA bus> on isab0 | |
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d22000-0xf7d227ff irq 19 at device 31.2 on pci0 | |
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported | |
ahcich0: <AHCI channel> at channel 0 on ahci0 | |
ahcich3: <AHCI channel> at channel 3 on ahci0 | |
ahcich4: <AHCI channel> at channel 4 on ahci0 | |
ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0 | |
device_attach: ahciem0 attach returned 6 | |
acpi_button0: <Power Button> on acpi0 | |
acpi_tz0: <Thermal Zone> on acpi0 | |
acpi_tz1: <Thermal Zone> on acpi0 | |
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 | |
atkbd0: <AT Keyboard> irq 1 on atkbdc0 | |
kbd0 at atkbd0 | |
atkbd0: [GIANT-LOCKED] | |
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 | |
coretemp0: <CPU On-Die Thermal Sensors> on cpu0 | |
est0: <Enhanced SpeedStep Frequency Control> on cpu0 | |
Timecounters tick every 1.000 msec | |
ugen0.1: <Intel EHCI root HUB> at usbus0 | |
ugen1.1: <Intel EHCI root HUB> at usbus1 | |
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | |
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 | |
ada0: <Samsung SSD 850 PRO 512GB EXM04B6Q> ACS-2 ATA SATA 3.x device | |
ada0: Serial Number S1SXNSAF917631W | |
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) | |
ada0: Command Queueing enabled | |
ada0: 488386MB (1000215216 512 byte sectors) | |
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> | |
Trying to mount root from ufs:/dev/ada0p1 [rw]... | |
ZFS filesystem version: 5 | |
ZFS storage pool version: features support (5000) | |
bridge0: Ethernet address: 02:35:33:b6:c1:00 | |
bridge1: Ethernet address: 02:35:33:b6:c1:01 | |
bridge2: Ethernet address: 02:35:33:b6:c1:02 | |
em0: changing name to 'int0' | |
lo0: link state changed to UP | |
uhub1: 3 ports with 3 removable, self powered | |
uhub0: 3 ports with 3 removable, self powered | |
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 | |
uhub2 on uhub1 | |
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 | |
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 | |
uhub3 on uhub0 | |
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 | |
vlan0: changing name to 'ext0' | |
vlan1: changing name to 'guest0' | |
uhub3: 6 ports with 6 removable, self powered | |
uhub2: 8 ports with 8 removable, self powered |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment