Skip to content

Instantly share code, notes, and snippets.

@petsam

petsam/dmesg

Created June 19, 2016 15:37
Show Gist options
  • Save petsam/c0f40a75938259bd240833aadb4be0da to your computer and use it in GitHub Desktop.
Save petsam/c0f40a75938259bd240833aadb4be0da to your computer and use it in GitHub Desktop.
Download ZIP
intelpower
Raw
dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.13-1-MANJARO (builduser@manjaro) (gcc version 6.1.1 20160501 (GCC) ) #1 SMP PREEMPT Wed Jun 8 09:21:59 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4-x86_64 root=UUID=051d4026-2922-4307-8264-b53306e4bf82 rw acpi_osi=Linux acpi=force acpi_enforce_resources=lax quiet resume=UUID=4cd16de0-b38c-4a6c-a960-bbe86994864d
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b3680fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3681000-0x00000000b36befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b36bf000-0x00000000b3735fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3736000-0x00000000b37befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b37bf000-0x00000000b37ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b37de000-0x00000000b37fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b37ff000-0x00000000b37fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 5733/Aspire 5733, BIOS V1.07 11/07/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0B3800000 mask FFF800000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FC0000000 write-back
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
[ 0.000000] BRK [0x01b46000, 0x01b46fff] PGTABLE
[ 0.000000] BRK [0x01b47000, 0x01b47fff] PGTABLE
[ 0.000000] BRK [0x01b48000, 0x01b48fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37551000-0x37a9ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000B37FE120 00007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000B37FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 0x00000000B37E9000 00F221 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 0x00000000B375A000 000040
[ 0.000000] ACPI: FACS 0x00000000B375A000 000040
[ 0.000000] ACPI: ASF! 0x00000000B37FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: HPET 0x00000000B37FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 0x00000000B37FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 0x00000000B37F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 0x00000000B37E8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 0x00000000B37E5000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASPT 0x00000000B37E1000 000034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B37E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000B37DF000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000B37DE000 00049F (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23bff7000-0x23bffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b3680fff]
[ 0.000000] node 0: [mem 0x00000000b36bf000-0x00000000b3735fff]
[ 0.000000] node 0: [mem 0x00000000b37bf000-0x00000000b37ddfff]
[ 0.000000] node 0: [mem 0x00000000b37ff000-0x00000000b37fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001fbffffff]
[ 0.000000] node 0: [mem 0x0000000200000000-0x000000023bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
[ 0.000000] On node 0 totalpages: 2012852
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11421 pages used for memmap
[ 0.000000] DMA32 zone: 730904 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xb8000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3681000-0xb36befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3736000-0xb37befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb37de000-0xb37fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88023bc00000 s92696 r8192 d30184 u262144
[ 0.000000] pcpu-alloc: s92696 r8192 d30184 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1981122
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4-x86_64 root=UUID=051d4026-2922-4307-8264-b53306e4bf82 rw acpi_osi=Linux acpi=force acpi_enforce_resources=lax quiet resume=UUID=4cd16de0-b38c-4a6c-a960-bbe86994864d
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7837944K/8051408K available (5804K kernel code, 953K rwdata, 1832K rodata, 1196K init, 1156K bss, 213464K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2527.531 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 5057.68 BogoMIPS (lpj=8425103)
[ 0.000038] pid_max: default: 32768 minimum: 301
[ 0.000045] ACPI: Core revision 20150930
[ 0.015169] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.015194] Security Framework initialized
[ 0.015196] Yama: becoming mindful.
[ 0.015705] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017710] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018546] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018559] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018818] Initializing cgroup subsys io
[ 0.018823] Initializing cgroup subsys memory
[ 0.018830] Initializing cgroup subsys devices
[ 0.018833] Initializing cgroup subsys freezer
[ 0.018836] Initializing cgroup subsys net_cls
[ 0.018838] Initializing cgroup subsys pids
[ 0.018858] CPU: Physical Processor ID: 0
[ 0.018859] CPU: Processor Core ID: 0
[ 0.018865] mce: CPU supports 9 MCE banks
[ 0.018876] CPU0: Thermal monitoring enabled (TM1)
[ 0.018883] process: using mwait in idle threads
[ 0.018887] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.018888] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.019215] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.185325] ftrace: allocating 23015 entries in 90 pages
[ 0.196839] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.334003] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x5)
[ 0.334031] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.334049] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.334052] ... version: 3
[ 0.334053] ... bit width: 48
[ 0.334054] ... generic registers: 4
[ 0.334055] ... value mask: 0000ffffffffffff
[ 0.334056] ... max period: 000000007fffffff
[ 0.334057] ... fixed-purpose events: 3
[ 0.334058] ... event mask: 000000070000000f
[ 0.364035] x86: Booting SMP configuration:
[ 0.364041] .... node #0, CPUs: #1
[ 0.366560] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.374033] #2
[ 0.374561] microcode: CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.384031] #3
[ 0.386381] x86: Booted up 1 node, 4 CPUs
[ 0.386386] smpboot: Total of 4 processors activated (20228.75 BogoMIPS)
[ 0.388956] devtmpfs: initialized
[ 0.391802] PM: Registering ACPI NVS region [mem 0xb3736000-0xb37befff] (561152 bytes)
[ 0.391899] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.391984] pinctrl core: initialized pinctrl subsystem
[ 0.392035] RTC time: 12:23:15, date: 06/19/16
[ 0.392155] NET: Registered protocol family 16
[ 0.407341] cpuidle: using governor ladder
[ 0.420672] cpuidle: using governor menu
[ 0.420738] Simple Boot Flag at 0x44 set to 0x1
[ 0.420777] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.420779] ACPI: bus type PCI registered
[ 0.420781] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.420853] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.420856] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.420869] PCI: Using configuration type 1 for base access
[ 0.434368] ACPI: Added _OSI(Module Device)
[ 0.434370] ACPI: Added _OSI(Processor Device)
[ 0.434371] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.434372] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.434374] ACPI: Added _OSI(Linux)
[ 0.438272] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.442039] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.464220] ACPI: Dynamic OEM Table Load:
[ 0.464228] ACPI: SSDT 0xFFFF880232139800 000474 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.464861] ACPI: Dynamic OEM Table Load:
[ 0.464868] ACPI: SSDT 0xFFFF88023218A000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.465780] ACPI: Dynamic OEM Table Load:
[ 0.465786] ACPI: SSDT 0xFFFF8802321D0C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.466412] ACPI: Dynamic OEM Table Load:
[ 0.466417] ACPI: SSDT 0xFFFF880232162400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.467468] ACPI : EC: EC started
[ 0.474110] ACPI: Interpreter enabled
[ 0.474120] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.474126] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.474148] ACPI: (supports S0 S3 S4 S5)
[ 0.474149] ACPI: Using IOAPIC for interrupt routing
[ 0.474180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.884915] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.884922] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.884955] \_SB_.PCI0:_OSC invalid UUID
[ 0.884956] _OSC request data:1 1f 0
[ 0.884960] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.885488] PCI host bridge to bus 0000:00
[ 0.885492] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.885494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.885496] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.885497] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.885499] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.885508] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.885532] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.885649] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.885663] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.885669] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.885674] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057]
[ 0.885849] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.885889] pci 0000:00:16.0: reg 0x10: [mem 0xd4406100-0xd440610f 64bit]
[ 0.885966] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.886099] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.886364] pci 0000:00:1a.0: reg 0x10: [mem 0xd4405c00-0xd4405fff]
[ 0.887833] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.887964] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.887990] pci 0000:00:1b.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.888051] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.888141] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.888183] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.888248] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.888336] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.888376] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.888442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.888575] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.888835] pci 0000:00:1d.0: reg 0x10: [mem 0xd4405800-0xd4405bff]
[ 0.890301] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.890402] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.890443] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.890572] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.890613] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.890834] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.890866] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f]
[ 0.890875] pci 0000:00:1f.2: reg 0x14: [io 0x305c-0x305f]
[ 0.890884] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047]
[ 0.890893] pci 0000:00:1f.2: reg 0x1c: [io 0x3058-0x305b]
[ 0.890903] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
[ 0.890913] pci 0000:00:1f.2: reg 0x24: [mem 0xd4405000-0xd44057ff]
[ 0.890954] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.891072] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.891089] pci 0000:00:1f.3: reg 0x10: [mem 0xd4406000-0xd44060ff 64bit]
[ 0.891108] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 0.891242] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.891272] pci 0000:00:1f.6: reg 0x10: [mem 0xd4404000-0xd4404fff 64bit]
[ 0.891524] pci 0000:01:00.0: [14e4:1692] type 00 class 0x020000
[ 0.891579] pci 0000:01:00.0: reg 0x10: [mem 0xd3400000-0xd340ffff 64bit]
[ 0.891711] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.891806] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.891810] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.891814] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.891819] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.891881] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[ 0.891933] pci 0000:02:00.0: reg 0x10: [mem 0xd2400000-0xd247ffff 64bit]
[ 0.891999] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.892070] pci 0000:02:00.0: supports D1 D2
[ 0.892072] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.892164] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.892168] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.892172] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 0.892177] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.892240] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.892251] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.892252] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.892254] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.892256] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 1.094572] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.094625] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.094674] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.094725] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.094774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.094824] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.094873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.094923] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.094943] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 1.094948] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.094952] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.095001] PCI host bridge to bus 0000:ff
[ 1.095004] pci_bus 0000:ff: root bus resource [bus ff]
[ 1.095009] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 1.095057] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 1.095109] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 1.095153] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 1.095197] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 1.095241] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 1.095334] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.095383] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.095487] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.095490] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.095493] vgaarb: loaded
[ 1.095494] vgaarb: bridge control possible 0000:00:02.0
[ 1.095605] PCI: Using ACPI for IRQ routing
[ 1.103800] PCI: pci_cache_line_size set to 64 bytes
[ 1.103878] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.103880] e820: reserve RAM buffer [mem 0xb3681000-0xb3ffffff]
[ 1.103881] e820: reserve RAM buffer [mem 0xb3736000-0xb3ffffff]
[ 1.103883] e820: reserve RAM buffer [mem 0xb37de000-0xb3ffffff]
[ 1.103884] e820: reserve RAM buffer [mem 0xb3800000-0xb3ffffff]
[ 1.104018] NetLabel: Initializing
[ 1.104020] NetLabel: domain hash size = 128
[ 1.104021] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.104034] NetLabel: unlabeled traffic allowed by default
[ 1.104070] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.104075] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.106102] clocksource: Switched to clocksource hpet
[ 1.112197] pnp: PnP ACPI init
[ 1.312909] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 1.312959] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.312962] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 1.312964] system 00:00: [io 0x0800-0x080f] has been reserved
[ 1.312966] system 00:00: [io 0xffff] has been reserved
[ 1.312968] system 00:00: [io 0xffff] has been reserved
[ 1.312970] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 1.312972] system 00:00: [io 0x0500-0x057f] has been reserved
[ 1.312977] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.313008] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.313047] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.313092] pnp 00:03: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[ 1.313388] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.313390] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.313392] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.313394] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.313396] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.313398] system 00:04: [mem 0xd4500000-0xd4500fff] has been reserved
[ 1.313400] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.313402] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.313404] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.313406] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.313409] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.313521] pnp: PnP ACPI: found 5 devices
[ 1.319884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.319892] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.319918] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.319922] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.319927] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 1.319931] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 1.319940] pci 0000:02:00.0: BAR 6: assigned [mem 0xd2480000-0xd248ffff pref]
[ 1.319942] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.319945] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.319949] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 1.319953] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 1.319959] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 1.319970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.319972] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.319973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.319975] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 1.319977] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.319979] pci_bus 0000:01: resource 1 [mem 0xd3400000-0xd43fffff]
[ 1.319981] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 1.319982] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.319984] pci_bus 0000:02: resource 1 [mem 0xd2400000-0xd33fffff]
[ 1.319986] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 1.319988] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 1.319990] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 1.319992] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.319993] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 1.320030] NET: Registered protocol family 2
[ 1.320237] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.320394] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.320599] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.320640] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.320673] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.320755] NET: Registered protocol family 1
[ 1.320775] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.346306] PCI: CLS 64 bytes, default 64
[ 1.346371] Unpacking initramfs...
[ 1.426668] Freeing initrd memory: 5436K (ffff880037551000 - ffff880037aa0000)
[ 1.426680] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.426683] software IO TLB [mem 0xaf681000-0xb3681000] (64MB) mapped at [ffff8800af681000-ffff8800b3680fff]
[ 1.426881] Scanning for low memory corruption every 60 seconds
[ 1.427229] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.427543] Initialise system trusted keyring
[ 1.427681] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.429109] zbud: loaded
[ 1.429312] VFS: Disk quotas dquot_6.6.0
[ 1.429347] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.429518] Key type big_key registered
[ 1.429767] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.429809] io scheduler noop registered
[ 1.429812] io scheduler deadline registered
[ 1.429842] io scheduler cfq registered
[ 1.429892] io scheduler bfq registered (default)
[ 1.429893] BFQ I/O-scheduler: v7r11
[ 1.430264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.430271] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.430283] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.430285] vesafb: scrolling: redraw
[ 1.430286] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.430300] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
[ 1.636106] Console: switching to colour frame buffer device 160x64
[ 1.841671] fb0: VESA VGA frame buffer device
[ 1.841688] intel_idle: MWAIT substates: 0x1120
[ 1.841690] intel_idle: v0.4.1 model 0x25
[ 1.841691] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.841869] GHES: HEST is not enabled!
[ 1.841935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.842371] Linux agpgart interface v0.103
[ 1.842696] rtc_cmos 00:01: RTC can wake from S4
[ 1.842848] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.842878] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.842892] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.843283] NET: Registered protocol family 10
[ 1.843489] NET: Registered protocol family 17
[ 1.843691] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[ 1.843701] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[ 1.843706] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[ 1.843714] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[ 1.843789] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.844169] registered taskstats version 1
[ 1.844196] Loading compiled-in X.509 certificates
[ 1.844238] zswap: loaded using pool lzo/zbud
[ 1.844998] Magic number: 4:522:380
[ 1.845033] pci_bus 0000:ff: hash matches
[ 1.845161] rtc_cmos 00:01: setting system clock to 2016-06-19 12:23:16 UTC (1466338996)
[ 1.845352] PM: Checking hibernation image partition UUID=4cd16de0-b38c-4a6c-a960-bbe86994864d
[ 1.845359] PM: Hibernation image not present or could not be loaded.
[ 1.847707] Freeing unused kernel memory: 1196K (ffffffff818f0000 - ffffffff81a1b000)
[ 1.847712] Write protecting the kernel read-only data: 8192k
[ 1.848274] Freeing unused kernel memory: 328K (ffff8800015ae000 - ffff880001600000)
[ 1.849772] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 1.861090] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 1.912932] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.929245] ACPI: bus type USB registered
[ 1.929283] usbcore: registered new interface driver usbfs
[ 1.929297] usbcore: registered new interface driver hub
[ 1.929337] usbcore: registered new device driver usb
[ 1.930171] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.930251] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.931569] SCSI subsystem initialized
[ 1.933473] libata version 3.00 loaded.
[ 1.933922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.934238] ehci-pci: EHCI PCI platform driver
[ 1.934469] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.934480] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.934503] ehci-pci 0000:00:1a.0: debug port 2
[ 1.938426] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.938534] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4405c00
[ 1.946093] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.946362] hub 1-0:1.0: USB hub found
[ 1.946375] hub 1-0:1.0: 2 ports detected
[ 1.946676] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.946683] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.946695] ehci-pci 0000:00:1d.0: debug port 2
[ 1.950601] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.950615] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4405800
[ 1.959473] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.959820] hub 2-0:1.0: USB hub found
[ 1.959839] hub 2-0:1.0: 2 ports detected
[ 1.960002] ahci 0000:00:1f.2: version 3.0
[ 1.960224] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.960264] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.960272] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.967200] scsi host0: ahci
[ 1.967498] scsi host1: ahci
[ 1.967706] scsi host2: ahci
[ 1.967813] scsi host3: ahci
[ 1.967862] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 24
[ 1.967864] ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 24
[ 1.967866] ata3: DUMMY
[ 1.967867] ata4: DUMMY
[ 1.971459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.252813] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.266149] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.286137] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.288056] ata1.00: ATA-9: SanDisk SDSSDA120G, Z22000RL, max UDMA/133
[ 2.288061] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.298992] ata1.00: configured for UDMA/133
[ 2.299606] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDA12 00RL PQ: 0 ANSI: 5
[ 2.376890] hub 1-1:1.0: USB hub found
[ 2.376964] hub 1-1:1.0: 6 ports detected
[ 2.390611] hub 2-1:1.0: USB hub found
[ 2.390766] hub 2-1:1.0: 8 ports detected
[ 2.429501] tsc: Refined TSC clocksource calibration: 2527.437 MHz
[ 2.429507] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246e78c209f, max_idle_ns: 440795316396 ns
[ 2.619491] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.622827] ata2.00: ATAPI: HL-DT-ST DVDRAM GT51N, 1.00, max UDMA/100
[ 2.625854] ata2.00: configured for UDMA/100
[ 2.633664] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT51N 1.00 PQ: 0 ANSI: 5
[ 2.642796] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.647720] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.647780] sd 0:0:0:0: [sda] Write Protect is off
[ 2.647784] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.647806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.648158] sda: sda1 sda2 sda3
[ 2.648419] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.656126] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.660816] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.660823] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.661091] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.740654] hub 2-1.3:1.0: USB hub found
[ 2.740823] hub 2-1.3:1.0: 4 ports detected
[ 3.019457] usb 2-1.3.3: new low-speed USB device number 4 using ehci-pci
[ 3.126186] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.134474] usbcore: registered new interface driver usbhid
[ 3.134477] usbhid: USB HID core driver
[ 3.135330] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.0/0003:062A:0201.0001/input/input2
[ 3.186399] hid-generic 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.0-1.3.3/input0
[ 3.186668] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.1/0003:062A:0201.0002/input/input3
[ 3.202774] usb 2-1.3.4: new low-speed USB device number 5 using ehci-pci
[ 3.239692] hid-generic 0003:062A:0201.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.0-1.3.3/input1
[ 3.310219] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.4/2-1.3.4:1.0/0003:046D:C045.0003/input/input4
[ 3.310405] hid-generic 0003:046D:C045.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3.4/input0
[ 3.429632] clocksource: Switched to clocksource tsc
[ 13.501744] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.657637] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.663197] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 13.663339] systemd[1]: Detected architecture x86-64.
[ 13.663551] systemd[1]: Set hostname to <acpsmanjaro>.
[ 13.834480] systemd[1]: Reached target Login Prompts.
[ 13.835362] systemd[1]: Created slice System Slice.
[ 13.835680] systemd[1]: Created slice system-getty.slice.
[ 13.835924] systemd[1]: Created slice User and Session Slice.
[ 13.836001] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 13.836098] systemd[1]: Listening on Journal Socket.
[ 13.849176] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.850659] systemd[1]: Starting Load Kernel Modules...
[ 13.852282] systemd[1]: Listening on Process Core Dump Socket.
[ 13.853284] systemd[1]: Mounting Huge Pages File System...
[ 13.853580] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.855545] systemd[1]: Starting Set Up Additional Binary Formats...
[ 13.856241] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 13.856852] systemd[1]: Starting Setup Virtual Console...
[ 13.856976] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.857002] systemd[1]: Reached target Remote File Systems.
[ 13.857064] systemd[1]: Listening on udev Kernel Socket.
[ 13.857117] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.857132] systemd[1]: Reached target Slices.
[ 13.857200] systemd[1]: Listening on udev Control Socket.
[ 13.857827] systemd[1]: Mounting Debug File System...
[ 13.858305] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 13.858391] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.860120] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.860209] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.860235] systemd[1]: Reached target Encrypted Volumes.
[ 13.868321] EXT4-fs (sda1): re-mounted. Opts: discard
[ 13.868426] systemd[1]: Starting Journal Service...
[ 13.870856] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.870971] systemd[1]: Mounted Debug File System.
[ 13.871041] systemd[1]: Mounted Huge Pages File System.
[ 13.871570] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 13.871998] vboxdrv: Found 4 processor cores
[ 13.872014] systemd[1]: Started Remount Root and Kernel File Systems.
[ 13.872178] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 197 (systemd-binfmt)
[ 13.892514] vboxdrv: TSC mode is Invariant, tentative frequency 2527432756 Hz
[ 13.892519] vboxdrv: Successfully loaded version 5.0.20_OSE (interface 0x00240000)
[ 13.897760] VBoxNetAdp: Successfully started.
[ 13.898681] VBoxNetFlt: Successfully started.
[ 13.904580] VBoxPciLinuxInit
[ 13.909083] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 13.909824] systemd[1]: Starting Load/Save Random Seed...
[ 13.916769] systemd[1]: Starting udev Coldplug all Devices...
[ 13.917327] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.918351] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 13.922318] vboxpci: IOMMU not found (not registered)
[ 13.923137] systemd[1]: Started Set Up Additional Binary Formats.
[ 13.928756] systemd[1]: Started Load/Save Random Seed.
[ 13.949362] FS-Cache: Loaded
[ 13.960417] RPC: Registered named UNIX socket transport module.
[ 13.960422] RPC: Registered udp transport module.
[ 13.960423] RPC: Registered tcp transport module.
[ 13.960424] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.976008] systemd[1]: Started Setup Virtual Console.
[ 13.981800] FS-Cache: Netfs 'nfs' registered for caching
[ 13.994006] systemd[1]: Started udev Coldplug all Devices.
[ 14.009163] systemd[1]: Starting Show Plymouth Boot Screen...
[ 14.010116] systemd[1]: Started Load Kernel Modules.
[ 14.010751] systemd[1]: Started Create Static Device Nodes in /dev.
[ 14.034335] systemd[1]: Starting udev Kernel Device Manager...
[ 14.034355] systemd[1]: Reached target Local File Systems (Pre).
[ 14.037611] systemd[1]: Mounting /tmp...
[ 14.038346] systemd[1]: Mounting Configuration File System...
[ 14.039134] systemd[1]: Starting Apply Kernel Variables...
[ 14.041972] systemd[1]: Mounted /tmp.
[ 14.045712] systemd[1]: Mounted Configuration File System.
[ 14.054334] systemd[1]: Started Apply Kernel Variables.
[ 14.073399] systemd[1]: Started Journal Service.
[ 14.092249] systemd-journald[214]: Received request to flush runtime journal from PID 1
[ 14.170596] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0C:00/input/input5
[ 14.170605] ACPI: Power Button [PWRB]
[ 14.170674] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0D:00/input/input6
[ 14.170724] ACPI: Lid Switch [LID0]
[ 14.170789] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0E:00/input/input7
[ 14.170793] ACPI: Sleep Button [SLPB]
[ 14.170899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 14.170902] ACPI: Power Button [PWRF]
[ 14.177774] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 14.181224] wmi: Mapper loaded
[ 14.214654] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.215560] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 14.215836] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 14.215939] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 14.216402] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 14.216411] ACPI: This conflict may cause random problems and system instability
[ 14.216414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.216420] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 14.216426] ACPI: This conflict may cause random problems and system instability
[ 14.216427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.216429] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 14.216434] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20150930/utaddress-254)
[ 14.216439] ACPI: This conflict may cause random problems and system instability
[ 14.216440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.216441] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 14.216446] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20150930/utaddress-254)
[ 14.216451] ACPI: This conflict may cause random problems and system instability
[ 14.216452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.216987] ACPI Warning: SystemIO range 0x0000000000003000-0x000000000000301F conflicts with OpRegion 0x0000000000003000-0x000000000000300F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[ 14.216994] ACPI: This conflict may cause random problems and system instability
[ 14.216997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.217025] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 14.247070] [drm] Initialized drm 1.1.0 20060810
[ 14.247212] pps_core: LinuxPPS API ver. 1 registered
[ 14.247215] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 14.250303] PTP clock support registered
[ 14.264943] tg3.c:v3.137 (May 11, 2014)
[ 14.283205] libphy: tg3 mdio bus: probed
[ 14.351771] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address dc:0e:a1:98:84:04
[ 14.351777] tg3 0000:01:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=100:01)
[ 14.351779] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 14.351781] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 14.419857] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 14.419893] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 14.420407] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 14.420633] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 14.424311] [drm] Memory usable by graphics device = 2048M
[ 14.424317] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[ 14.424319] fb: switching to inteldrmfb from VESA VGA
[ 14.424357] Console: switching to colour dummy device 80x25
[ 14.424425] [drm] Replacing VGA console driver
[ 14.432985] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.432989] [drm] Driver supports precise vblank timestamp query.
[ 14.433452] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 14.457361] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 14.470429] Adding 3935992k swap on /dev/sda3. Priority:-1 extents:1 across:3935992k SSDscFS
[ 14.475907] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 14.475914] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.475918] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 14.475921] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.475923] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.475927] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 14.475929] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 14.491030] ath: phy0: Enable LNA combining
[ 14.494382] ath: phy0: ASPM enabled: 0x43
[ 14.494392] ath: EEPROM regdomain: 0x65
[ 14.494396] ath: EEPROM indicates we should expect a direct regpair map
[ 14.494402] ath: Country alpha2 being used: 00
[ 14.494405] ath: Regpair used: 0x65
[ 14.500328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.500564] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.500693] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.523702] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 14.523720] acer_wmi: Function bitmap for Communication Button: 0x1
[ 14.526006] input: Acer WMI hotkeys as /devices/virtual/input/input13
[ 14.527367] input: Acer BMA150 accelerometer as /devices/virtual/input/input14
[ 14.535662] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.536177] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001700000, irq=17
[ 14.538697] iTCO_vendor_support: vendor-support=0
[ 14.539678] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 14.540349] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.540390] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 14.540554] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.544268] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
[ 14.570040] cfg80211: World regulatory domain updated:
[ 14.570045] cfg80211: DFS Master region: unset
[ 14.570047] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.570050] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.570053] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.570056] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.570059] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 14.570063] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 14.570065] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 14.570068] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.570071] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.578112] tg3 0000:01:00.0 enp1s0: renamed from eth0
[ 14.580110] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.616630] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 14.654501] fbcon: inteldrmfb (fb0) is primary device
[ 14.685798] ACPI: AC Adapter [AC] (on-line)
[ 14.755202] Console: switching to colour frame buffer device 170x48
[ 14.919239] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 15.022517] acpi device:03: registered as cooling_device5
[ 15.022700] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 15.022920] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 15.322528] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[ 15.382197] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[ 15.443479] psmouse serio1: elantech: Elan sample query result 0e, 00, 00
[ 15.609315] random: nonblocking pool is initialized
[ 15.752245] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 15.900739] media: Linux media interface: v0.10
[ 15.907085] Linux video capture interface: v2.00
[ 16.042507] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (1bcf:288a)
[ 16.060310] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input16
[ 16.060895] usbcore: registered new interface driver uvcvideo
[ 16.060899] USB Video Class driver (1.1.1)
[ 16.132307] ACPI: Battery Slot [BAT0] (battery present)
[ 16.172287] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.187038] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.193064] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 16.216978] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 16.266575] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 16.317657] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.356324] tg3 0000:01:00.0 enp1s0: Link is down
[ 16.385065] mousedev: PS/2 mouse device common for all mice
[ 16.748592] Non-volatile memory driver v1.3
[ 16.968864] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 16.977142] fuse init (API version 7.23)
[ 17.591686] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 19.415635] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 26.925736] wlp2s0: authenticate with 00:25:86:d0:af:f4
[ 26.948513] wlp2s0: send auth to 00:25:86:d0:af:f4 (try 1/3)
[ 26.950385] wlp2s0: authenticated
[ 26.960371] ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[ 26.960390] ath9k 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
[ 26.960392] ath9k 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
[ 26.961697] wlp2s0: associate with 00:25:86:d0:af:f4 (try 1/3)
[ 26.964531] wlp2s0: RX AssocResp from 00:25:86:d0:af:f4 (capab=0x431 status=0 aid=2)
[ 26.964650] wlp2s0: associated
[ 26.964730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 27.582563] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
[ 27.582604] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder B FIFO underrun
[ 27.584112] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 27.585420] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 28.824065] msm_notifier[1019]: segfault at 8 ip 00007fbb8d8e1671 sp 00007ffc06ab6a90 error 4 in libQt5XcbQpa.so.5.6.0[7fbb8d8aa000+f0000]
[ 28.898224] traps: xfsettingsd[1175] trap int3 ip:7feb6250070b sp:7ffffedabec0 error:0
[ 29.013811] wlp2s0: deauthenticating from 00:25:86:d0:af:f4 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 29.059881] cfg80211: World regulatory domain updated:
[ 29.059887] cfg80211: DFS Master region: unset
[ 29.059889] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 29.059892] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 29.059895] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 29.059898] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 29.059901] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 29.059904] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 29.059907] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 29.059910] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 29.059912] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 37.170092] wlp2s0: authenticate with 00:25:86:d0:af:f4
[ 37.185076] wlp2s0: send auth to 00:25:86:d0:af:f4 (try 1/3)
[ 37.187020] wlp2s0: authenticated
[ 37.187361] ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[ 37.187365] ath9k 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
[ 37.187367] ath9k 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
[ 37.188094] wlp2s0: associate with 00:25:86:d0:af:f4 (try 1/3)
[ 37.190956] wlp2s0: RX AssocResp from 00:25:86:d0:af:f4 (capab=0x431 status=0 aid=2)
[ 37.191091] wlp2s0: associated
[ 9313.639505] soffice.bin[4907]: segfault at 1bdaa30 ip 0000000001bdaa30 sp 00007ffc144fe168 error 15
Raw
tlp
# ------------------------------------------------------------------------------
# tlp - Parameters for power save
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
# Hint: some features are disabled by default, remove the leading # to enable
# them.
# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1
# Operation mode when no power supply can be detected: AC, BAT
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=AC
# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.
# Select a CPU frequency scaling governor:
# ondemand, powersave, performance, conservative
# Intel Core i processor with intel_pstate driver:
# powersave, performance
# Important:
# You *must* disable your distribution's governor settings or conflicts will
# occur. ondemand is sufficient for *almost all* workloads, you should know
# what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=ondemand
#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# tlp-stat output, Section "+++ Processor".
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0
# Set Intel P-state performance: 0..100 (%)
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
#CPU_MIN_PERF_ON_AC=0
#CPU_MAX_PERF_ON_AC=100
#CPU_MIN_PERF_ON_BAT=0
#CPU_MAX_PERF_ON_BAT=30
# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Minimize number of used CPU cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog:
# 0=disable (default, saves power), 1=enable (for kernel debugging only)
NMI_WATCHDOG=0
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Frequency voltage pairs are written to:
# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"
# Set CPU performance versus energy savings policy:
# performance, normal, powersave
# Requires kernel module msr and x86_energy_perf_policy from linux-tools
ENERGY_PERF_POLICY_ON_AC=normal
ENERGY_PERF_POLICY_ON_BAT=powersave
# Hard disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"
# Hard disk advanced power management level: 1..254, 255 (max saving, min, off)
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
# Hard disk spin down timeout:
# 0: spin down disabled
# 1..240: timeouts from 5s to 20min (in units of 5s)
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select IO scheduler for the disk devices: noop, deadline, cfq (Default: cfq);
# Separate values for multiple devices with spaces.
#DISK_IOSCHED="cfq cfq"
# SATA aggressive link power management (ALPM):
# min_power, medium_power, max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
# PCI Express Active State Power Management (PCIe ASPM):
# default, performance, powersave
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
# (Kernel >= 2.6.35 only, open-source radeon driver explicitly)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
# Radeon dynamic power management method (DPM): battery, performance
# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
# WiFi power saving mode: 1=disable, 5=enable; not supported by all adapters.
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
# Disable wake on LAN: Y/N
WOL_DISABLE=Y
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power save.
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y
# Set to 1 to power off optical drive in UltraBay/MediaBay when running on
# battery. A value of 0 disables this feature (Default).
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"
# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
# Runtime PM for *all* PCI(e) bus devices, except blacklisted ones:
# 0=disable, 1=enable
RUNTIME_PM_ALL=1
# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM
# (should prevent accidential power on of hybrid graphics' discrete part).
# Default is "radeon nouveau"; use "" to disable the feature completely.
# Separate multiple drivers with spaces.
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1
# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically (see below)
#USB_BLACKLIST="1111:2222 3333:4444"
# WWAN devices are excluded from USB autosuspend:
# 0=do not exclude / 1=exclude
USB_BLACKLIST_WWAN=1
# Include listed devices into USB autosuspend even if already excluded
# by the driver or WWAN blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"
# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0
# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth, wifi, wwan
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
# Radio devices to enable on shutdown: bluetooth, wifi, wwan
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
# Radio devices to enable on AC: bluetooth, wifi, wwan
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
# Radio devices to disable on battery: bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
# Radio devices to disable on battery when not in use (not connected):
# bluetooth, wifi, wwan
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_TRESH value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main / Internal battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80
# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan
# Hints:
# - Parameters are disabled by default, remove the leading # to enable them.
# - Separate multiple radio devices with spaces.
# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""
# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment