IDASEN to Home Assistant.yaml

esphome:
  name: idasen
  platform: esp32
  board: esp32dev # Replace with your board
  # Starting with ESPHome 2021.10, libraries need to be included manually
  libraries:
    - "ESP32 BLE Arduino"

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Idasen Fallback Hotspot"
    password: aaaaaaaa

captive_portal:

# BEGIN BLUETOOTH DISCOVERY INTEGRATION
esp32_ble_tracker:

# globals:
#  # To store the Desk Connection Status
#  - id: ble_client_connected
#    type: bool
#    initial_value: 'false'

#ble_client:
#  - mac_address: "D1:88:9C:81:3F:05"
#    id: idasen_desk
#    on_connect:
#      then:
#        # Update the Desk Connection Status
#        - lambda: |-
#            id(ble_client_connected) = true;
#        - delay: 5s
#        # Update desk height and speed sensors after bluetooth is connected
#        - lambda: |-
#            id(desk_height).update();
#            id(desk_speed).update();
#    on_disconnect:
#      then:
#        # Update the Desk Connection Status
#        - lambda: |-
#            id(ble_client_connected) = false;

#sensor:
#  # Desk Height Sensor
#  - platform: ble_client
#    ble_client_id: idasen_desk
#    id: desk_height
#    name: 'Desk Height'
#    service_uuid: '99fa0020-338a-1024-8a49-009c0215f78a'
#    characteristic_uuid: '99fa0021-338a-1024-8a49-009c0215f78a'
#    icon: 'mdi:arrow-up-down'
#    unit_of_measurement: 'cm'
#    accuracy_decimals: 1
#    update_interval: 10s
#    notify: true
#    lambda: |-
#      uint16_t raw_height = ((uint16_t)x[1] << 8) | x[0];
#      unsigned short height_mm = raw_height / 10;

#      return (float) height_mm / 10;

#  # Desk Speed Sensor
#  - platform: ble_client
#    ble_client_id: idasen_desk
#    id: desk_speed
#    name: 'Desk Speed'
#    service_uuid: '99fa0020-338a-1024-8a49-009c0215f78a'
#    characteristic_uuid: '99fa0021-338a-1024-8a49-009c0215f78a'
#    icon: 'mdi:speedometer'
#    unit_of_measurement: 'cm/min' # I'm not sure this unit is correct
#    accuracy_decimals: 0
#    update_interval: 10s
#    notify: true
#    lambda: |-
#      uint16_t raw_speed = ((uint16_t)x[3] << 8) | x[2];
#      return raw_speed / 100;
  
#button:
#  - platform: template
#    name: Update Desk Information
#    id: update_desk_data
#    on_press:
#        # Update desk height and speed sensors on button press
#        - lambda: |-
#            id(desk_height).update();
#            id(desk_speed).update();


# END BLUETOOTH DISCOVERY INTEGRATION

# BEGIN IDASEN DESK CONTROLLER INTEGRATION
# https://github.com/j5lien/esphome-idasen-desk-controller/tree/v1.2.3
external_components:
  - source: github://j5lien/esphome-idasen-desk-controller@v1.2.3

idasen_desk_controller:
    # Desk controller bluetooth mac address
    # -----------
    # Required
    mac_address: "D1:88:9C:81:3F:05"
    # Use bluetooth callback to update sensors and cover entities
    # Deactivate this option when data are not correctly updated when using the cover entity
    # -----------
    # Optionnal (default true)
    bluetooth_callback: false
  
cover:
  - platform: idasen_desk_controller
    name: "IDASEN Desk"
  
binary_sensor:
  # Desk bluetooth connection
  - platform: idasen_desk_controller
    name: "IDASEN Desk Connection"
    type: CONNECTION
  # Desk moving status
  - platform: idasen_desk_controller
    name: "IDASEN Desk Moving"
    type: MOVING
# END IDASEN DESK CONTROLLER INTEGRATION