Last active
May 12, 2024 11:56
-
-
Save peyanski/5d46c7323385b38c64235f88e43df8c4 to your computer and use it in GitHub Desktop.
Use this code to make your LD2410 sensor to work with ESP32 or ESP8266 board
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
esphome: | |
name: ld2410-esp32 | |
friendly_name: ld2410-esp32 | |
esp32: | |
board: esp32dev | |
framework: | |
type: arduino | |
# Enable logging | |
logger: | |
# Enable Home Assistant API | |
api: | |
encryption: | |
key: "IArm3ZGuqL1HLZXXbu4/L0ciw1TDSagu6THKP8LnFdo=" | |
ota: | |
password: "3373716c7967d461cf4bd0ce1ba42e9a" | |
wifi: | |
ssid: !secret wifi_ssid | |
password: !secret wifi_password | |
# Enable fallback hotspot (captive portal) in case wifi connection fails | |
ap: | |
ssid: "Ld2410-Esp32 Fallback Hotspot" | |
password: "AhxmD317i7r1" | |
captive_portal: | |
light: | |
- platform: binary | |
name: "Blue Status Light" | |
output: light_output | |
id: led_light | |
restore_mode: ALWAYS_OFF | |
output: | |
- platform: gpio | |
pin: GPIO2 | |
id: light_output | |
i2c: | |
sda: 21 | |
scl: 22 | |
scan: true | |
id: bus_a | |
uart: | |
id: ld2410_uart | |
tx_pin: RX | |
rx_pin: TX | |
baud_rate: 256000 | |
parity: NONE | |
stop_bits: 1 | |
ld2410: | |
uart_id: ld2410_uart | |
throttle: 1500ms | |
id: ld2410_comp | |
select: | |
- platform: ld2410 | |
distance_resolution: | |
name: distance resolution | |
baud_rate: | |
name: baud rate | |
light_function: | |
name: light function | |
out_pin_level: | |
name: out pin level | |
button: | |
- platform: ld2410 | |
factory_reset: | |
name: "factory reset" | |
restart: | |
name: "restart" | |
query_params: | |
name: query params | |
number: | |
- platform: ld2410 | |
timeout: | |
name: timeout | |
max_move_distance_gate: | |
name: max move distance gate | |
max_still_distance_gate: | |
name: max still distance gate | |
g0: | |
move_threshold: | |
name: g0 move threshold | |
still_threshold: | |
name: g0 still threshold | |
g1: | |
move_threshold: | |
name: g1 move threshold | |
still_threshold: | |
name: g1 still threshold | |
g2: | |
move_threshold: | |
name: g2 move threshold | |
still_threshold: | |
name: g2 still threshold | |
g3: | |
move_threshold: | |
name: g3 move threshold | |
still_threshold: | |
name: g3 still threshold | |
g4: | |
move_threshold: | |
name: g4 move threshold | |
still_threshold: | |
name: g4 still threshold | |
g5: | |
move_threshold: | |
name: g5 move threshold | |
still_threshold: | |
name: g5 still threshold | |
g6: | |
move_threshold: | |
name: g6 move threshold | |
still_threshold: | |
name: g6 still threshold | |
g7: | |
move_threshold: | |
name: g7 move threshold | |
still_threshold: | |
name: g7 still threshold | |
g8: | |
move_threshold: | |
name: g8 move threshold | |
still_threshold: | |
name: g8 still threshold | |
light_threshold: | |
name: light threshold | |
text_sensor: | |
- platform: ld2410 | |
version: | |
name: "presenece sensor version" | |
mac_address: | |
name: "presenece sensor mac address" | |
switch: | |
- platform: ld2410 | |
engineering_mode: | |
name: "engineering mode" | |
bluetooth: | |
name: control Bluetooth | |
sensor: | |
- platform: ld2410 | |
moving_distance: | |
name: "Moving distance (cm)" | |
still_distance: | |
name: "Still Distance (cm)" | |
moving_energy: | |
name: "Move Energy (%)" | |
still_energy: | |
name: "Still Energy (%)" | |
detection_distance: | |
name: "Distance Detection (cm)" | |
g0: | |
move_energy: | |
name: g0 move energy | |
still_energy: | |
name: g0 still energy | |
g1: | |
move_energy: | |
name: g1 move energy | |
still_energy: | |
name: g1 still energy | |
g2: | |
move_energy: | |
name: g2 move energy | |
still_energy: | |
name: g2 still energy | |
g3: | |
move_energy: | |
name: g3 move energy | |
still_energy: | |
name: g3 still energy | |
g4: | |
move_energy: | |
name: g4 move energy | |
still_energy: | |
name: g4 still energy | |
g5: | |
move_energy: | |
name: g5 move energy | |
still_energy: | |
name: g5 still energy | |
g6: | |
move_energy: | |
name: g6 move energy | |
still_energy: | |
name: g6 still energy | |
g7: | |
move_energy: | |
name: g7 move energy | |
still_energy: | |
name: g7 still energy | |
g8: | |
move_energy: | |
name: g8 move energy | |
still_energy: | |
name: g8 still energy | |
light: | |
name: light | |
- platform: bh1750 | |
name: "Illuminance" | |
address: 0x23 | |
update_interval: 30s | |
binary_sensor: | |
- platform: ld2410 | |
has_target: | |
name: Presence | |
has_moving_target: | |
name: Moving Target | |
has_still_target: | |
name: Still Target |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I get this message, I can count on help,
ERROR Running command failed: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
ERROR Please try running esptool.py --before default_reset --after hard_reset --baud 460800 --port /dev/ttyUSB0 --chip esp32 write_flash -z --flash_size detect 0x10000 /data/build/ld2410-esp32/.pioenvs/ld2410-esp32/firmware.bin 0x1000 /data/build/ld2410-esp32/.pioenvs/ld2410-esp32/bootloader.bin 0x8000 /data/build/ld2410-esp32/.pioenvs/ld2410-esp32/partitions.bin 0xe000 /data/cache/platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin locally.
INFO Upload with baud rate 460800 failed. Trying again with baud rate 115200.