phasetr/tex-memo.md

## tex-memo.md

      
    Raw
  

              tex-memo.md
            
          
    大規模TeXのコンパイルを通す

このドキュメントのメモ


あとでブログに移すが、とりあえずやったことを気軽にメモしつつ、公開であわよくば識者からのコメントを頂く。
前も別PCで同じエラーが出てちょっと対処したがもうほとんど何も覚えていないから、とりあえず記録を取って再発時または PC 交換時の再設定用に役立てる。
規模感

texファイル： 8MB 程度
PDF：およそ 7000 ページで 23MB
label：3500 個程度で ref もそれなりにたくさんしている。


ファイル編集環境（念のため）

Emacs の org がメイン
細かい経緯は忘れたが、いろいろな都合によって org を適当なスクリプトを使って md にしたうえで、pandoc で md to tex をやり、latexmk で PDF にしている。


いま問題と思っているところ

コンパイルしたときのログの最終部が次のようになっている。
``
./math_expedition.tex:170580: TeX capacity exceeded, sorry [main memory size=50
00000].
 \copy \z@
l.170580 \end{align}
Here is how much of TeX's memory you used:
59506 strings out of 481525
1423771 string characters out of 5927989
5000000 words of memory out of 5000000
74166 multiletter control sequences out of 15000+600000
611048 words of font info for 205 fonts, out of 8000000 for 9000
934 hyphenation exceptions out of 8191
66i,22n,100p,6466b,1084s stack positions out of 5000i,500n,10000p,200000b,80000s
``
5000000 words of memory out of 5000000 が邪悪な印象がある。
以前 texmf.cnf の main_memory をいじったら少し良くなった気がしたので、それをもう一度やりたい。
前は ptex を使っていたが、いまは uplatex を使っているので、uplatex での対策を調べている。
メモ


https://twitter.com/wtsnjp/status/1297897674260090898 というコメントを頂く。
texlive-ja.pdf
とりあえず試験的に main_memory を増やそうと思い、いろいろ調べる。
https://texwiki.texjp.org/?texmf.cnf%20%E3%83%95%E3%82%A1%E3%82%A4%E3%83%AB#r5008864

以前の記憶をもとにとりあえず main_memory を増やそうとして見て断念

sh kpsewhich -all texmf.cnf 

最近の TeX Live の場合は，次の例（これは Windows の TeX Live 2020）のように 2 つのパスを返します。
c:/texlive/2020/texmf.cnf
c:/texlive/2020/texmf-dist/web2c/texmf.cnf

（面倒だから転記しないが、インストールパスが違うのと 2019 をインストールしている分、ローカルとの差異がある。）
とりあえず 2 つ目の方をいじってみて uplatex -ini uplatex.ini とした。
次のエラーが出る：元が ptex 用のコマンドなので機械的に uplatex にしたのがよろしくない可能性大。
``sh
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
This is e-upTeX, Version 3.14159265-p3.8.2-u1.25-190131-2.6 (utf8.uptex) (TeX Live 2019/W32TeX) (INITEX)
restricted \write18 enabled.
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/config/uplatex.ini
<<< making "uplatex with Babel" format >>>
(c:/ap/texlive/2019/texmf-dist/tex/uplatex/base/uplatex.ltx
(c:/ap/texlive/2019/texmf-dist/tex/latex/base/latex.ltx
! LaTeX requires e-TeX.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
l.100     {LaTeX requires e-TeX}
)
! Undefined control sequence.
l.20 \typeout
{**************************^^J%
! Undefined control sequence.
l.25 \makeatletter
(c:/ap/texlive/2019/texmf-dist/tex/platex/base/plcore.ltx
! This cannot happen!^^JYour file `latex.ltx' might be broken.
l.22                 might be broken}
@@end
! Undefined control sequence.
l.22                 might be broken}@
@end
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.43 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.48 ...fter\expandafter\expandafter{\platexBANNER
}
! Use of \platexNILa doesn't match its definition.
\platexBANNER ->\platexNILa \platexNILb
l.62 ...fter\expandafter\expandafter{\platexBANNER
}
! Undefined control sequence.
l.67 \newif
\if@plincludeinrelease
! Undefined control sequence.
l.303         \xdef\ffam@list{\ffam
@list\fam@elt<#2>}%
! Too many }'s.
l.312     }
%
! Too many }'s.
l.313 }
! Undefined control sequence.
l.354 @
onlypreamble\DeclareKanjiSubstitution
! Use of \DeclareKanjiSubstitution doesn't match its definition.
l.355 \def
\DeclareErrorKanjiFont#1#2#3#4#5{%
! Undefined control sequence.
l.355 \def\DeclareErrorKanjiFont
#1#2#3#4#5{%
! Undefined control sequence.
l.364 @
onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.364 @onlypreamble\DeclareErrorKanjiFont
! Undefined control sequence.
l.408 @
onlypreamble\reDeclareMathAlphabet
! Use of \reDeclareMathAlphabet doesn't match its definition.
l.409 \def
\DualLang@mathalph@bet#1#2{%
! Undefined control sequence.
l.409 \def\DualLang
@mathalph@bet#1#2{%
! Undefined control sequence.
l.425     \let\DualLang@Mfontsw@
firstoftwo
! Undefined control sequence.
l.459 \newif
\if@knjcmd
! Undefined control sequence.
 \inlist
...
l.472     \inlist@
\expandafter\tmp@item\expandafter{\ktenc@list}%
! Undefined control sequence.
 \tmp
...
l.472     \inlist@\expandafter\tmp@
item\expandafter{\ktenc@list}%
! Undefined control sequence.
l.472 ...@\expandafter\tmp@item\expandafter{\ktenc
@list}%
! Undefined control sequence.
l.473     \ifin
@
! Undefined control sequence.
l.474       \let\ct@encoding\k
@encoding
! Undefined control sequence.
l.475       \edef\cy@encoding{\csname y@enc@\k
@encoding\endcsname}%
! Extra \else.
l.476     \else
! Undefined control sequence.
l.477       @
latex@error{KANJI Encoding scheme \k@encoding' unknown}\@eha ! Undefined control sequence. l.477 ...  \@latex@error{KANJI Encoding scheme \k
@encoding' unknown}@eha
! Undefined control sequence.
l.477 ... Encoding scheme `\k@encoding' unknown}@
eha
! Extra \fi.
l.479   \fi
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.482   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.483   \pickup
@font
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr
@kfontshape/\f@size\endcsname}%
! Undefined control sequence.
l.487   \xdef\font@name{\csname\curr@kfontshape/\f
@size\endcsname}%
! Undefined control sequence.
l.488   \pickup
@font
! Undefined control sequence.
l.507   \pickup
@font
! Undefined control sequence.
l.509   \enc
@update
! Undefined control sequence.
l.511     \set
@fontsize\baselinestretch\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch
\f@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f
@size\f@baselineskip
! Undefined control sequence.
l.511     \set@fontsize\baselinestretch\f@size\f
@baselineskip
! Undefined control sequence.
l.513   \size
@update}
! Too many }'s.
l.513   \size@update}
! Undefined control sequence.
l.536 \newbox
\adjust@box
! Undefined control sequence.
l.536 \newbox\adjust
@box
! Undefined control sequence.
l.537 \newdimen
\adjust@dimen
! Undefined control sequence.
l.537 \newdimen\adjust
@dimen
! Undefined control sequence.
l.538 \DeclareRobustCommand
\adjustbaseline{%
! Undefined control sequence.
l.538 \DeclareRobustCommand\adjustbaseline
{%
! Undefined control sequence.
l.539     \setbox\adjust
@box\hbox{\char\jis"3441}%"
! Missing number, treated as zero.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! A  was supposed to be here.

@
l.539     \setbox\adjust@
box\hbox{\char\jis"3441}%"
! Undefined control sequence.
l.540     \cht
\ht\adjust@box
! Undefined control sequence.
l.540     \cht\ht\adjust
@box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Missing number, treated as zero.

@
l.540     \cht\ht\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.540     \cht\ht\adjust@
box
! Undefined control sequence.
l.541     \cdp
\dp\adjust@box
! Undefined control sequence.
l.541     \cdp\dp\adjust
@box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Missing number, treated as zero.

@
l.541     \cdp\dp\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.541     \cdp\dp\adjust@
box
! Undefined control sequence.
l.542     \cwd
\wd\adjust@box
! Undefined control sequence.
l.542     \cwd\wd\adjust
@box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Missing number, treated as zero.

@
l.542     \cwd\wd\adjust@
box
! Illegal unit of measure (pt inserted).

@
l.542     \cwd\wd\adjust@
box
! Undefined control sequence.
l.543     \cvs
\normalbaselineskip
! Undefined control sequence.
l.543     \cvs\normalbaselineskip
! Undefined control sequence.
l.544     \chs
\cwd
! Undefined control sequence.
l.544     \chs\cwd
! Undefined control sequence.
l.545     \cHT
\cht \advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht
\advance\cHT\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT
\cdp
! Undefined control sequence.
l.545     \cHT\cht \advance\cHT\cdp
! You can't use `end-group character }' after \advance.
l.555   \fi}
! Undefined control sequence.
l.556 \DeclareRobustCommand
\romanencoding[1]{%
! Undefined control sequence.
l.556 \DeclareRobustCommand\romanencoding
[1]{%
! Undefined control sequence.
l.558       @
latex@error{Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.558 ...tex@error{Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.568 \DeclareRobustCommand
\kanjiencoding[1]{%
! Undefined control sequence.
l.568 \DeclareRobustCommand\kanjiencoding
[1]{%
! Undefined control sequence.
l.570       @
latex@error{KANJI Encoding scheme #1' unknown}\@eha ! Undefined control sequence. l.570 ...ror{KANJI Encoding scheme #1' unknown}@
eha
! Undefined control sequence.
l.580 \DeclareRobustCommand
\fontencoding[1]{%
! Undefined control sequence.
l.580 \DeclareRobustCommand\fontencoding
[1]{%
! Undefined control sequence.
 \inlist
...
l.583   \inlist@
\expandafter\tmp@item\expandafter{\kenc@list}%
! Undefined control sequence.
l.583 ...t@\expandafter\tmp@item\expandafter{\kenc
@list}%
! Undefined control sequence.
l.584   \ifin
@ \kanjiencoding{#1}\else\romanencoding{#1}\fi}
! Undefined control sequence.
l.584   \ifin@ \kanjiencoding
{#1}\else\romanencoding{#1}\fi}
! Extra \else.
l.584   \ifin@ \kanjiencoding{#1}\else
\romanencoding{#1}\fi}
! Undefined control sequence.
l.584 ...in@ \kanjiencoding{#1}\else\romanencoding
{#1}\fi}
! Extra \fi.
l.584 ...njiencoding{#1}\else\romanencoding{#1}\fi
}
! Undefined control sequence.
l.623 \newif
\if@notkfam
! Undefined control sequence.
 \inlist
...
l.659     \inlist@
\expandafter\tmp@item\expandafter{\notffam@list}%
! Undefined control sequence.
 \tmp
...
l.659     \inlist@\expandafter\tmp@
item\expandafter{\notffam@list}%
(That makes 100 errors; please try again.)
No pages of output.
Transcript written on uplatex.log.
``
問題のファイルを再コンパイルしてログを見る

長いからとりあえず最後だけコピペ。
``sh
./math_expedition.tex:170580: TeX capacity exceeded, sorry [main memory size=50
00000].
 \copy \z@
l.170580 \end{align}
Here is how much of TeX's memory you used:
59506 strings out of 481525
1423771 string characters out of 5927989
5000000 words of memory out of 5000000
74166 multiletter control sequences out of 15000+600000
611048 words of font info for 205 fonts, out of 8000000 for 9000
934 hyphenation exceptions out of 8191
66i,22n,100p,6466b,1084s stack positions out of 5000i,500n,10000p,200000b,80000s
Output written on math_expedition.dvi (5411 pages, 27918852 bytes).
``
とりあえず 5000000 words of memory out of 5000000 が気になる。
あと次のようなエラーも死ぬほど吐いている。
``sh
LaTeX Font Warning: Font shape J20/mc/b/n' undefined (Font)              using J20/mc/bx/n' instead on input line 170506.
LaTeX Font Warning: Font shape J20/mc/b/n' undefined (Font)              using J20/mc/bx/n' instead on input line 170519.
``
この辺、いったんつぶしたような気もするが、もう覚えていないので、メモリ問題が解決したらまた見てみる気分がある。