Skip to content

Instantly share code, notes, and snippets.

@phpdude
Created Apr 10, 2015
Embed
What would you like to do?
smart.log
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 094 094 050 Pre-fail Always - 0/227337587
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 1
9 Power_On_Hours_and_Msec 0x0032 073 073 000 Old_age Always - 23964h+45m+20.150s
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1123
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 15
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 8
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/227337587
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 1
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/227337587
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/227337587
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 098 098 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 23286
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 25197
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 25197
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 23117
SMART Error Log not supported
SMART Self-test Log not supported
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment