server

/**
 * An Mirf example which copies back the data it recives.
 *
 * Pins:
 * Hardware SPI:
 * MISO -> 12
 * MOSI -> 11
 * SCK -> 13
 *
 * Configurable:
 * CE -> 8
 * CSN -> 7
 *
 */

#include <SPI.h>
#include <Mirf.h>
#include <nRF24L01.h>
#include <MirfHardwareSpiDriver.h>

void setup(){
  Serial.begin(9600);
  Mirf.cePin=8;
  Mirf.csnPin=7;
  /*
   * Set the SPI Driver.
   */

  Mirf.spi = &MirfHardwareSpi;
  
  /*
   * Setup pins / SPI.
   */
   
  Mirf.init();
  
  /*
   * Configure reciving address.
      */
  Mirf.channel=10;
  
  Mirf.setRADDR((byte *)"serv1");
  
  /*
   * Set the payload length to sizeof(unsigned long) the
   * return type of millis().
   *
   * NB: payload on client and server must be the same.
   */
  
  Mirf.payload = sizeof( long);
  
  /*
   * Write channel and payload config then power up reciver.
   */
   
  Mirf.config();
  
  Serial.println("Listening..."); 
}

void loop(){
  /*
   * A buffer to store the data.
   */
  int i; 
 byte data[Mirf.payload];
  
  /*
   * If a packet has been recived.
   *
   * isSending also restores listening mode when it 
   * transitions from true to false.
   */
   
  if(!Mirf.isSending() && Mirf.dataReady()){
    Serial.println("Got packet");
    
    /*
     * Get load the packet into the buffer.
     */
    for(i==1;i>5;i++){
        Serial.println(data[i]);
        }
     
    Mirf.getData(data);
    
    /*
     * Set the send address.
     */
     
     
    Mirf.setTADDR((byte *)"clie1");
    
    /*
     * Send the data back to the client.
     */
     //Serial.println(data);
    Mirf.send(data);
    
    /*
     * Wait untill sending has finished
     *
     * NB: isSending returns the chip to receving after returning true.
     */
      
    //Serial.println("Reply sent.");
  }
}