Created
August 8, 2012 19:13
-
-
Save ploubser/3297752 to your computer and use it in GitHub Desktop.
hpacu output
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Smart Array P212 in Slot 1 | |
| Bus Interface: PCI | |
| Slot: 1 | |
| Serial Number: PACCPID1130064H | |
| Cache Serial Number: PACCQID1140110N | |
| RAID 6 (ADG) Status: Disabled | |
| Controller Status: OK | |
| Chassis Slot: | |
| Hardware Revision: Rev C | |
| Firmware Version: 5.12 | |
| Rebuild Priority: Medium | |
| Expand Priority: Medium | |
| Surface Scan Delay: 15 secs | |
| Surface Scan Mode: Idle | |
| Queue Depth: Automatic | |
| Monitor and Performance Delay: 60 min | |
| Elevator Sort: Enabled | |
| Degraded Performance Optimization: Disabled | |
| Inconsistency Repair Policy: Disabled | |
| Wait for Cache Room: Disabled | |
| Surface Analysis Inconsistency Notification: Disabled | |
| Post Prompt Timeout: 0 secs | |
| Cache Board Present: True | |
| Cache Status: OK | |
| Accelerator Ratio: 25% Read / 75% Write | |
| Drive Write Cache: Disabled | |
| Total Cache Size: 256 MB | |
| No-Battery Write Cache: Disabled | |
| Cache Backup Power Source: Batteries | |
| Battery/Capacitor Count: 1 | |
| Battery/Capacitor Status: OK | |
| SATA NCQ Supported: True | |
| Array: A | |
| Interface Type: SAS | |
| Unused Space: 0 MB | |
| Status: OK | |
| Logical Drive: 1 | |
| Size: 33.9 GB | |
| Fault Tolerance: RAID 1 | |
| Heads: 255 | |
| Sectors Per Track: 32 | |
| Cylinders: 8709 | |
| Strip Size: 256 KB | |
| Status: OK | |
| Array Accelerator: Enabled | |
| Unique Identifier: 600508B1001C18D0F2A9C2992A941EFA | |
| Disk Name: /dev/cciss/c0d0 | |
| Mount Points: /boot 250 MB | |
| OS Status: LOCKED | |
| Logical Drive Label: AF6C9833PACCPID1130064HE8E2 | |
| Mirror Group 0: | |
| physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 36 GB, OK) | |
| Mirror Group 1: | |
| physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 36 GB, OK) | |
| physicaldrive 1I:1:1 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 1 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SAS | |
| Size: 36 GB | |
| Rotational Speed: 15000 | |
| Firmware Revision: HPD0 | |
| Serial Number: DQL2P640023G0615 | |
| Model: HP DF036A9843 | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| physicaldrive 1I:1:2 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 2 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SAS | |
| Size: 36 GB | |
| Rotational Speed: 15000 | |
| Firmware Revision: HPD0 | |
| Serial Number: DRL2P6B002780646 | |
| Model: HP DF036A9843 | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| Array: B | |
| Interface Type: SATA | |
| Unused Space: 0 MB | |
| Status: OK | |
| Logical Drive: 2 | |
| Size: 5.5 TB | |
| Fault Tolerance: RAID 1+0 | |
| Heads: 255 | |
| Sectors Per Track: 32 | |
| Cylinders: 65535 | |
| Strip Size: 256 KB | |
| Status: OK | |
| Array Accelerator: Enabled | |
| Unique Identifier: 600508B1001CF7BA6DA95B10EB883E9B | |
| Disk Name: /dev/cciss/c0d1 | |
| Mount Points: None | |
| OS Status: LOCKED | |
| Logical Drive Label: AF6C8839PACCPID1130064H80E1 | |
| Mirror Group 0: | |
| physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 2 TB, OK) | |
| physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 2 TB, OK) | |
| physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SATA, 2 TB, OK) | |
| Mirror Group 1: | |
| physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SATA, 2 TB, OK) | |
| physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SATA, 2 TB, OK) | |
| physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SATA, 2 TB, OK) | |
| physicaldrive 1I:1:3 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 3 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SATA | |
| Size: 2 TB | |
| Firmware Revision: MK7OHPG0 | |
| Serial Number: YFG25AYA | |
| Model: ATA MB2000EBUCF | |
| SATA NCQ Capable: True | |
| SATA NCQ Enabled: True | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| physicaldrive 1I:1:4 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 4 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SATA | |
| Size: 2 TB | |
| Firmware Revision: HPG1 | |
| Serial Number: WMAY02631142 | |
| Model: ATA MB2000EAZNL | |
| SATA NCQ Capable: True | |
| SATA NCQ Enabled: True | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| physicaldrive 1I:1:5 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 5 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SATA | |
| Size: 2 TB | |
| Firmware Revision: HPG1 | |
| Serial Number: WMAY02649040 | |
| Model: ATA MB2000EAZNL | |
| SATA NCQ Capable: True | |
| SATA NCQ Enabled: True | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| physicaldrive 1I:1:6 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 6 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SATA | |
| Size: 2 TB | |
| Firmware Revision: HPG1 | |
| Serial Number: WMAY02631431 | |
| Model: ATA MB2000EAZNL | |
| SATA NCQ Capable: True | |
| SATA NCQ Enabled: True | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| physicaldrive 1I:1:7 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 7 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SATA | |
| Size: 2 TB | |
| Firmware Revision: HPG1 | |
| Serial Number: WMAY02662627 | |
| Model: ATA MB2000EAZNL | |
| SATA NCQ Capable: True | |
| SATA NCQ Enabled: True | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| physicaldrive 1I:1:8 | |
| Port: 1I | |
| Box: 1 | |
| Bay: 8 | |
| Status: OK | |
| Drive Type: Data Drive | |
| Interface Type: SATA | |
| Size: 2 TB | |
| Firmware Revision: HPG1 | |
| Serial Number: WMAY02577180 | |
| Model: ATA MB2000EAZNL | |
| SATA NCQ Capable: True | |
| SATA NCQ Enabled: True | |
| PHY Count: 1 | |
| PHY Transfer Rate: 3.0GBPS | |
| Expander 250 | |
| Device Number: 250 | |
| Firmware Version: 2.18 | |
| WWID: 500143801445B350 | |
| Port: 1I | |
| Box: 1 | |
| Vendor ID: HP | |
| Enclosure SEP (Vendor ID HP, Model DL18xG6BP) 248 | |
| Device Number: 248 | |
| Firmware Version: 2.18 | |
| WWID: 500143801445B363 | |
| Port: 1I | |
| Box: 1 | |
| Vendor ID: HP | |
| Model: DL18xG6BP | |
| SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 249 | |
| Device Number: 249 | |
| Firmware Version: RevC | |
| WWID: 50014380168E39BF | |
| Vendor ID: PMCSIERA | |
| Model: SRC 8x6G |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
The latest firmware release for the DL18xG6BP backplane is v2.20 ;-)