Skip to content

Instantly share code, notes, and snippets.

@preble

preble/autostart

Created August 15, 2018 01:53
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save preble/75b4da2f36f39d48ff6ed2a175b66fd5 to your computer and use it in GitHub Desktop.
Save preble/75b4da2f36f39d48ff6ed2a175b66fd5 to your computer and use it in GitHub Desktop.
Download ZIP
Autostart JMRI PanelPro on a Raspberry Pi -- without launching two instances.
Raw
autostart
# Full path: /home/pi/.config/lxsession/LXDE-pi/autostart
@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@xset s off
@xset -dpms
@xset s noblank
@/home/pi/jmri-runner.sh
Raw
jmri-runner.sh
#!/bin/bash
# Full path: /home/pi/jmri-runner.sh
# Sleep to hopefully wait until the window manager is fully started.
# Added because I would sometimes start up the RPi and find that PanelPro was running,
# but not visible in the window manager. Maybe there is a better way?
sleep 10
lock=/tmp/jmri-runner.lock
flock --nonblock $lock ~/JMRI/PanelPro
if [ $? -ne 0 ]; then
echo "PanelPro is already running. $lock is locked."
exit 1
fi
@Erik84750
Copy link

Erik84750 commented Feb 11, 2023 •
edited

Even with 20 seconds delay the program (PanelPro) does not show up on the desktop even though the Taskmanager shows it running.
What to do?

EDIT: I have TightVNC server running from startup. Could that be the reason for not showing on a hdmi-connected monitor?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment