- https://www.thingiverse.com/thing:3645422/files
- https://www.thingiverse.com/thing:2424013/files for the 2 front knobs only; or https://www.thingiverse.com/thing:2746414/files (print at 101-102%)
- Belt tensioners https://www.thingiverse.com/thing:3074280/files
- Petsfang https://cdn.thingiverse.com/assets/52/d1/39/84/b1/CR10_STOCK_MANUAL_BASE_V11.3.stl and https://cdn.thingiverse.com/assets/6a/fc/27/1f/ad/CR10TEVO_5015_DUCT_V7.5....stl, for additional blower fan
- Idler teeth https://www.thingiverse.com/thing:2772136/files
- Connect USBASP to 6-pin header, DO NOT connect VCC. Have the printer powered by its PSU
- Backup with
sudo avrdude -p atmega1284p -c usbasp -F -U flash:r:factory.hex:i
- Write https://www.creality3d.cn/ender-2-p00093p1.html firmware with
sudo avrdude -p m1284p -c usbasp -F -U flash:w:'/home/me/Desktop/Ender-2公司英文.hex':i
- Write self-compiled Marlin firmware from https://github.com/probonopd/marlin-for-ender-2/releases/tag/continuous with
sudo avrdude -p m1284p -c usbasp -F -U flash:w:'/home/me/Downloads/Marlin.ino.hex':i
. A bootloader is not needed!
- Ender-3 profile
- Change to 150x150 bed size
- Change start Gcode so that the prime line is shorter: 120 instead of 200 mm (edit in 2 places)