Skip to content

Instantly share code, notes, and snippets.

@projectgus
Created February 12, 2012 08:31
Show Gist options
  • Save projectgus/1807319 to your computer and use it in GitHub Desktop.
Save projectgus/1807319 to your computer and use it in GitHub Desktop.
openwrt-zipit 3.2 libertas problem
scripted as;
sleep 15
ifconfig wlan0 up &
sleep 10
dmesg > after.log
/sbin/poweroff
ie 'ifconfig wlan0 up' is run @ 82
[ 0.000000] Linux version 3.2.0 (gus@gorgon) (gcc version 4.5.4 20120105 (prerelease) (Linaro GCC 4.5-2012.01) ) #1 Sun Feb 12 16:27:08 EST 2012
[ 0.000000] CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Zipit Z2
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Run Mode clock: 208.00MHz (*16)
[ 0.000000] Turbo Mode clock: 312.00MHz (*1.5, inactive)
[ 0.000000] Memory clock: 104.00MHz (/2)
[ 0.000000] System bus clock: 104.00MHz
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat c02c0040, node_mem_map c02ed000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=tty0 console=ttyS2,115200 fbcon=rotate:3 root=/dev/mmcblk0p1 rootwait init=/etc/preinit loglevel=7
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 32MB = 32MB total
[ 0.000000] Memory: 29452k/29452k available, 3316k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc2800000 - 0xe8000000 ( 600 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc02892f8 (2565 kB)
[ 0.000000] .init : 0xc028a000 - 0xc02a7000 ( 116 kB)
[ 0.000000] .data : 0xc02a8000 - 0xc02c06c0 ( 98 kB)
[ 0.000000] .bss : 0xc02c06e4 - 0xc02ecd2c ( 178 kB)
[ 0.000000] NR_IRQS:288 nr_irqs:288 288
[ 0.000000] sched_clock: 32 bits at 3250kHz, resolution 307ns, wraps every 1321528ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.002399] Calibrating delay loop... 207.25 BogoMIPS (lpj=1036288)
[ 0.070475] pid_max: default: 32768 minimum: 301
[ 0.071220] Mount-cache hash table entries: 512
[ 0.072658] CPU: Testing write buffer coherency: ok
[ 0.083855] NET: Registered protocol family 16
[ 0.201102] bio: create slab <bio-0> at 0
[ 0.221780] I2C: i2c-0: PXA I2C adapter
[ 0.235624] Switching to clocksource oscr0
[ 0.345430] NET: Registered protocol family 2
[ 0.346631] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.348374] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.348661] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.348839] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.348953] TCP reno registered
[ 0.349054] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.349217] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.350280] NET: Registered protocol family 1
[ 0.351366] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.351604] PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with 416000kHz maxfreq
[ 0.351799] PXA CPU frequency change support initialized
[ 0.369599] JFFS2 version 2.2 (NAND) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.374653] msgmni has been set to 57
[ 0.377627] io scheduler noop registered
[ 0.377820] io scheduler deadline registered
[ 0.378338] io scheduler cfq registered (default)
[ 0.849464] Console: switching to colour frame buffer device 80x40
[ 0.864992] PXA Overlay driver loaded successfully!
[ 0.878373] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
[ 0.881603] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
[ 0.884903] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
[ 1.225442] console [ttyS2] enabled
[ 1.306437] brd: module loaded
[ 1.347791] loop: module loaded
[ 1.358922] physmap platform flash device: 00800000 at 00000000
[ 1.366338] physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x008865
[ 1.380584] Intel/Sharp Extended Query Table at 0x0039
[ 1.389368] Intel/Sharp Extended Query Table at 0x0039
[ 1.397952] Intel/Sharp Extended Query Table at 0x0039
[ 1.406419] Intel/Sharp Extended Query Table at 0x0039
[ 1.414711] Intel/Sharp Extended Query Table at 0x0039
[ 1.423070] Using auto-unlock on power-up/resume
[ 1.430835] cfi_cmdset_0001: Erase suspend on write enabled
[ 1.439456] erase region 0: offset=0x0,size=0x2000,blocks=8
[ 1.439516] erase region 1: offset=0x10000,size=0x10000,blocks=127
[ 1.439646] physmap-flash: 1 set(s) of 1 interleaved chips --> 16 partitions of 512 KiB
[ 1.442571] Creating 4 MTD partitions on "physmap-flash":
[ 1.451668] 0x000000000000-0x000000040000 : "U-Boot Bootloader"
[ 1.470615] 0x000000040000-0x000000060000 : "U-Boot Environment"
[ 1.489964] 0x000000060000-0x0000007e0000 : "Flash"
[ 1.509050] 0x0000007e0000-0x000000800000 : "U-Boot Logo"
[ 1.532733] mousedev: PS/2 mouse device common for all mice
[ 1.547606] input: pxa27x-keypad as /devices/platform/pxa27x-keypad/input/input0
[ 1.568508] pxa-rtc pxa-rtc: rtc core: registered pxa-rtc as rtc0
[ 1.580104] i2c /dev entries driver
[ 1.592113] APM Battery Driver
[ 1.629354] Registered led device: z2:green:wifi
[ 1.631231] Registered led device: z2:green:charged
[ 1.632962] Registered led device: z2:amber:charging
[ 1.637073] TCP cubic registered
[ 1.643694] NET: Registered protocol family 17
[ 1.651711] NET: Registered protocol family 15
[ 1.659268] XScale iWMMXt coprocessor detected.
[ 1.677208] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 1.695118] pxa-rtc pxa-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
[ 1.712227] Waiting for root device /dev/mmcblk0p1...
[ 1.757064] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.772116] mmc0: new SD card at address 0007
[ 1.783343] mmcblk0: mmc0:0007 SD02G 1.84 GiB
[ 1.800218] mmcblk0: p1
[ 1.840770] EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[ 1.893530] VFS: Mounted root (ext2 filesystem) on device 179:1.
[ 1.904982] Freeing init memory: 116K
[ 17.666847] lib80211: common routines for IEEE802.11 drivers
[ 17.680440] lib80211_crypt: registered algorithm 'NULL'
[ 17.731982] lib80211_crypt: registered algorithm 'WEP'
[ 17.784062] lib80211_crypt: registered algorithm 'CCMP'
[ 17.837416] lib80211_crypt_tkip: Unknown symbol wireless_send_event (err 0)
[ 17.899455] Compat-wireless backport release: compat-wireless-2012-01-16-14-g02166d5
[ 17.915226] Backport based on wireless-testing.git master-2012-02-06
[ 18.053142] cfg80211: Calling CRDA to update world regulatory domain
[ 18.635262] cfg80211: World regulatory domain updated:
[ 18.645036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.661000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.676776] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.692647] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.708678] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.724814] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.971684] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.561308] nf_conntrack version 0.5.0 (462 buckets, 1848 max)
[ 20.232770] libertas_spi: Libertas SPI driver
[ 21.817004] libertas_spi spi1.0: (unregistered net_device): 00:50:43:02:fe:01, fw 9.70.10p0, cap 0x0000030b
[ 21.853299] libertas_spi spi1.0: wlan0: Marvell WLAN 802.11 adapter
[ 21.866309] cfg80211: Calling CRDA for country: US
[ 83.931864] cfg80211: Regulatory domain changed to country: US
[ 83.946140] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 83.962034] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 83.977487] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 83.993036] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 84.008827] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 84.025375] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 84.042586] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 86.782493] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 86.850320] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 86.910114] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 86.980453] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.049339] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.120117] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.189396] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.250132] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.319096] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.390773] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.469866] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.539616] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.599422] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.669192] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.734628] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.809477] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.879783] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 87.944352] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.019173] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.079683] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.149302] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.209283] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.279748] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.330785] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.399352] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.470025] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.539281] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.611373] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.689915] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.760623] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.834376] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 88.929776] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.009336] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.079161] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.149210] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.209219] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.274224] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.339973] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.409324] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.465418] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.529426] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.596963] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.659170] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.739160] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.807284] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.877822] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 89.939853] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.004231] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.070154] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.150183] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.226757] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.289253] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.359367] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.429242] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.480469] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.549185] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.619338] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.679191] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.749360] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.819708] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.875367] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.939403] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 90.999440] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.069138] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.139401] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.209332] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.269272] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.349678] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.418610] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.480320] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.550188] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.613579] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.679188] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.759247] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.819637] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.890787] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 91.969408] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.047158] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.119508] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.191126] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.259918] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.320059] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.388367] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.460480] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.526970] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
[ 92.609594] libertas_spi spi1.0: wlan0: PREP_CMD: command 0x001f failed: 1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment