Following https://github.com/antonialoytorrens/TF101-linux-images in another order
https://github.com/antonialoytorrens/TF101-linux-images#2-u-boot-for-tf101-wheelie-and-nvflash My Transfomer as the serial C30* thus implies SBK2
ToDo
Following https://github.com/antonialoytorrens/TF101-linux-images in another order
https://github.com/antonialoytorrens/TF101-linux-images#2-u-boot-for-tf101-wheelie-and-nvflash My Transfomer as the serial C30* thus implies SBK2
ToDo
---------------------------------------- | |
--- Definitions | |
---------------------------------------- | |
--- Huawei protocol used in Wireshark to dissect packets | |
--- @class Proto | |
local huawei_proto = {} | |
--- @class hpFields | |
local hpFields = {} |
How-to to install bluetooth and run huawei-lpv2 on the Rapsberry Pi 3B (v1.2).
Read the whole guide before proceeding.
Follow this guide to install Arch on a SDCard.
To install it on a USB stick, you need to :
Lots of works have been made to communicate with the Honor Band 3/4 in order to be used with GadgetBridge.
RE is followed in issue 1021
BTW, communication where not complete and the RE was done on BLE LPv2.
A new protocol LPv3 appeared.
RE the LPv3 BLE protocol and integrate Honor devices in GadgetBridge.
If you haven't, enable Travis CI for your repository by going to your Travis CI profile page and flicking the repository switch on.
I hereby claim:
To claim this, I am signing this object:
# All multiplicators are the same for example purpose | |
# Change them to suit your needs with | |
# https://gist.github.com/psolyca/722b9b9e32e6c66e29f9b4c5788ea50f to choose a base bitrate | |
# https://gist.github.com/psolyca/57a4025b0bba5216db728e1054c04a2d to choose bitrate multiplicators | |
# https://gist.github.com/psolyca/d83bd3594c94c6e3fd17d7ae636678ff to choose a resolution and the number associate | |
# Resolution depend on the choice between NTSC and PAL on the cam. | |
# Following resolutions are NTSC format. | |
# Only one base multiplicator for all presets |
0x49742400 #1.00 Mbps | |
0x49927C00 #1.20 Mbps | |
0x49989680 #1.25 Mbps | |
0x49B71B00 #1.50 Mbps | |
0x49D59F80 #1.75 Mbps | |
0x49F42400 #2.00 Mbps |
The values in the video bitrate table are stored as 32 bit floating point values : | |
0x3D4CCCCD #0.05 | |
0x3DCCCCCD #0.1 | |
0x3E19999A #0.15 | |
0x3E4CCCCD #0.2 | |
0x3E800000 #0.25 | |
0x3E99999A #0.3 | |
0x3EB33333 #0.35 | |
0x3ECCCCCD #0.4 |
Addresses | Resolutions |
---|---|
0xA06E50BC | 1920x1080p |
0xA06E50FC | 1280x720p |
0xA06E513C | 848x480p |
0xA06E517C | 640x360p |