model cuh-ZEY2 firmware 5.05

gistfile1.txt

model cuh-ZEY2 16/06 S/N13310660043160
firmware 5.05
---------------------------------------
<118>[SceShellCore] Libc Heap Status: free 51%, in-use 2990.2 KB, trend +0.9 KB/min, peak 3055.2 KB, when 187 [sec]
ugen2.2: <OmniVision Technologies, Inc., USB Boot, >(VID=0x05a9 PID=0x0580 depth=1 port=2 speed=4) at usbus2
<118>#LOGIN MGR# Receive Event : SCE_MBUS_EVENT_CAMERA_EVENT
ugen2.2: <OmniVision Technologies, Inc., USB Boot, > at usbus2 (disconnected)
camera0: at uhub2, port 2, addr 1 (disconnected)
ugen2.2: <Omnivision Technologies, Inc., USB Camera-OV580, >(VID=0x05a9 PID=0x058b depth=1 port=2 speed=4) at usbus2
 CameraID   [10 45]
 BridgeID [03]
camera : lenzID:3 SensorID:3
camera : KINKO 1G4P Setting
camera : Detect AK5703
<118>* registerDevice:L1540 getAttachDeviceUsbPortInfo error. ret = 0xfffffff6
<118>@ connectDeviceByFunction:L1254
<118>@ checkAudioOutHandleStatus:L2483
<118>ScePsP[TID:0x18851]: sceMbusEvent has been received. (eventId=1 ADD, deviceId=0x5000000000001)
<118>#LOGIN MGR# Receive Event : SCE_MBUS_EVENT_DEVICE_ADDED [DeviceId:0x5000000000001][type:0][subType:5]
<118>D/125878 X
<118>#LOGIN MGR# : \mbus_if.cpp(3218) : SetLukeFromUserValue : ERROR : sceUserServiceGetMicLevel() failed. -2137652987(0x80960105)
<118>#LOGIN MGR# [NotifyMorpheusConnectStatusChangedForHmuSetupDialog] deviceId : 0xffffffffffffffff / userId : 0xffffffff / avSettingPuType : 0 / connectStatus : 6
<118>#LOGIN MGR# Receive Event : SCE_MBUS_EVENT_CAMERA_EVENT
<118>ScePsP[TID:0x18851]: sceMbusEvent has been received. (eventId=16 OWNERCHG, deviceId=0x5000000000001)
<118>#LOGIN MGR# Receive Event : SCE_MBUS_EVENT_DEVICE_OWNER_CHANGED [DeviceId:0x5000000000001][UserId:0x000000ff]
<118>#LOGIN MGR# [OnDeviceOwnerChanged] deviceId : 0x5000000000001 / userId : 0x000000ff
<118>#LOGIN MGR# [IsLukeMicEnable] GetDeviceList : 1
<118>#LOGIN MGR# : \mbus_utility.cpp(53) : GetMbusDeviceInfo : ERROR : sceMbusGetDeviceInfo( 0xffffffffffffffff) failed. -2137325440(0x809b0080)
<118>#LOGIN MGR# [AudioMessageMgr] userId : 0x10000000 / messageType : 148 / _deviceId : 0x0005000000000001
<118>#LOGIN MGR# Receive Event : SCE_MBUS_EVENT_CAMERA_EVENT
<118>[SceShellCore] Libc Heap Status: free 51%, in-use 2992.9 KB, trend +3.7 KB/min, peak 3055.2 KB, when 226 [sec]
<118>[mbus] onNewClient. clientNum 9 over 8
<118>#LOGIN MGR# Receive Event : SCE_MBUS_EVENT_CAMERA_EVENT
sx_xlock(/dev/notification lock): SceSwd has nonsleeping lock
<118>[SceShellCore] VM Stats: RSS 748.6, kernel 269.8, wire count 335.2, swap out 0.0, page table CPU 2559/6144 GPU 1091/2048