dmesg

<5>[    0.000000] Linux version 2.6.32.9-perf (conn@virtual) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-42) ) #75 PREEMPT Sat Jul 9 21:22:01 IST 2011

<4>[    0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f

<4>[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache

<4>[    0.000000] Machine: GT-I5500 Board

<6>[    0.000000] Partition (from atag) mibib -- Offset:0 Size:6

<6>[    0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2

<6>[    0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3

<6>[    0.000000] Partition (from atag) amss -- Offset:b Size:64

<6>[    0.000000] Partition (from atag) efs2 -- Offset:6f Size:61

<6>[    0.000000] Partition (from atag) nv_backup -- Offset:d0 Size:14

<6>[    0.000000] Partition (from atag) fota -- Offset:e4 Size:64

<6>[    0.000000] Partition (from atag) arm11boot -- Offset:148 Size:8

<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback

<7>[    0.000000] On node 0 totalpages: 54528

<7>[    0.000000] free_area_init_node: node 0, pgdat c06db428, node_mem_map c08f7000

<7>[    0.000000]   Normal zone: 426 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 54102 pages, LIFO batch:15

<6>[    0.000000] allocating 10485760 bytes at c1414000 (1614000 physical) for mdp pmem arena

<6>[    0.000000] allocating 7860224 bytes at c1e14000 (2014000 physical) for adsp pmem arena

<6>[    0.000000] allocating 372736 bytes (at 80000 physical) for audio pmem arena

<6>[    0.000000] allocating 655360 bytes at c2593000 (2793000 physical) for fb

<6>[    0.000000] allocating 114688 bytes at c2700000 (2900000 physical) for kernel ebi1 pmem arena

<6>[    0.000000] allocating 2097152 bytes (at d700000 physical) for KGSL

<6>[    0.000000] L210 cache controller enabled

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 54102

<5>[    0.000000] Kernel command line: mem=213M console=NULL hw=4 fbaddr=0xd4000

<4>[    0.000000] Europa H/W revision : 0x04

<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

<6>[    0.000000] Memory: 213MB = 213MB total

<5>[    0.000000] Memory: 183868KB available (6492K code, 2467K data, 160K init, 0K highmem)

<6>[    0.000000] Hierarchical RCU implementation.

<6>[    0.000000] NR_IRQS:261

<4>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000000] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)

<4>[    0.220145] Mount-cache hash table entries: 512

<6>[    0.220695] CPU: Testing write buffer coherency: 

<1>[    0.220796] Initialized Zero page successfully

<4>[    0.220845] ok

<6>[    0.223461] NET: Registered protocol family 16

<3>[    0.224160] smem_find(137, 64): wrong size 56

<6>[    0.224266] socinfo_init: v2, id=67, ver=1.2, raw_id=961, raw_ver=2

<6>[    0.224313] acpu_clock_init()

<6>[    0.224328] Shared PLL control available.

<6>[    0.224495] L val: PLL0: 50, PLL1: 12, PLL2: 62

<6>[    0.224590] ACPU running at 600000 KHz

<6>[    0.224608] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2

<6>[    0.224638]  0   19200  -1   1   19200    1   30720 -1 -1 -1  5  4  6

<6>[    0.224666]  1  120000   0   8   60000    2   61440 -1 -1 -1  7  4  6

<6>[    0.224696]  2  122880   1   2   61440    2   61440  1 -1 -1  7  4  6

<6>[    0.224725]  3  200000   2   6   66667    3   61440  1  2 -1  7  4  8

<6>[    0.224755]  4  245760   1   1  122880    2   61440  1  2  3  7 -1  8

<6>[    0.224783]  5  320000   0   3  160000    2  160000  1  2  3  7 -1  8

<6>[    0.224813]  6  400000   2   3  133333    3  160000  1  2  3  7 -1  8

<6>[    0.224841]  7  480000   0   2  160000    3  160000  1  2  3 -1 -1  8

<6>[    0.224871]  8  600000   2   2  200000    3  200000  5  4  3 -1 -1 -1

<6>[    0.224888] 5 scaling frequencies supported.

<6>[    0.226880] msm7x2x_init : msm7x2x_init #####

<4>[    0.235316] bio: create slab <bio-0> at 0

<5>[    0.236383] SCSI subsystem initialized

<6>[    0.236665] usbcore: registered new interface driver usbfs

<6>[    0.236791] usbcore: registered new interface driver hub

<6>[    0.236938] usbcore: registered new device driver usb

<6>[    0.237096] msm_i2c_probe

<6>[    0.237200] msm_i2c_probe: clk_ctl 316, 384000 Hz

<6>[    0.238708] Bluetooth: Core ver 2.15

<6>[    0.238861] NET: Registered protocol family 31

<6>[    0.238876] Bluetooth: HCI device and connection manager initialized

<6>[    0.238898] Bluetooth: HCI socket layer initialized

<6>[    0.239068] Switching to clocksource dg_timer

<6>[    0.248235] NET: Registered protocol family 2

<6>[    0.248485] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.249040] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

<6>[    0.249410] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

<6>[    0.249635] TCP: Hash tables configured (established 8192 bind 8192)

<6>[    0.249655] TCP reno registered

<6>[    0.249883] NET: Registered protocol family 1

<6>[    0.250256] RPC: Registered udp transport module.

<6>[    0.250273] RPC: Registered tcp transport module.

<6>[    0.250288] RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>[    0.250571] Trying to unpack rootfs image as initramfs...

<6>[    0.781798] Freeing initrd memory: 4172K

<4>[    0.784838] [DP] drop_caches_registerd

<6>[    0.784921] smd probe

<6>[    0.784938] smd_core_init()

<6>[    0.785036] smd_core_init() done

<6>[    0.785056] smd_alloc_loopback_channel: 'local_loopback' cid=100

<6>[    0.786201] smd_alloc_channel() 'DS' cid=0

<6>[    0.786336] smd_alloc_channel() 'DIAG' cid=1

<6>[    0.786446] smd_alloc_channel() 'RPCCALL' cid=2

<6>[    0.786548] smd_alloc_channel() 'DATA1' cid=7

<6>[    0.786646] smd_alloc_channel() 'DATA2' cid=8

<6>[    0.786743] smd_alloc_channel() 'DATA3' cid=9

<6>[    0.786840] smd_alloc_channel() 'DATA4' cid=10

<6>[    0.786938] smd_alloc_channel() 'DATA5' cid=11

<6>[    0.787056] smd_alloc_channel() 'DATA6' cid=12

<6>[    0.787163] smd_alloc_channel() 'DATA7' cid=13

<6>[    0.787275] smd_alloc_channel() 'DATA11' cid=17

<6>[    0.787386] smd_alloc_channel() 'DAL00' cid=38

<6>[    0.787498] smd_alloc_channel() 'DATA5_CNTL' cid=39

<6>[    0.787603] smd_alloc_channel() 'DATA6_CNTL' cid=40

<6>[    0.787710] smd_alloc_channel() 'DATA7_CNTL' cid=41

<3>[    0.787901] Notify: smsm init

<6>[    0.788850] SMD Packet Port Driver Initialized.

<6>[    0.789500] SMD: ch 2 0 -> 1

<6>[    0.789613] SMD: ch 2 1 -> 2

<6>[    0.789978] [adsp.c:adsp_init] rs3000000a -- 0

<6>[    0.790688] [audpp.c:audpp_probe] Number of decoder supported 5

<6>[    0.790708] [audpp.c:audpp_probe] Number of concurrency supported 7

<6>[    0.790728] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK

<6>[    0.790745] [audpp.c:audpp_probe] queueid:13

<6>[    0.790760] [audpp.c:audpp_probe] decid:0

<6>[    0.790775] [audpp.c:audpp_probe] nr_codec_support:11

<6>[    0.790790] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK

<6>[    0.790806] [audpp.c:audpp_probe] queueid:14

<6>[    0.790821] [audpp.c:audpp_probe] decid:1

<6>[    0.790835] [audpp.c:audpp_probe] nr_codec_support:4

<6>[    0.790851] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK

<6>[    0.790868] [audpp.c:audpp_probe] queueid:15

<6>[    0.790881] [audpp.c:audpp_probe] decid:2

<6>[    0.790896] [audpp.c:audpp_probe] nr_codec_support:4

<6>[    0.790911] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK

<6>[    0.790928] [audpp.c:audpp_probe] queueid:16

<6>[    0.790943] [audpp.c:audpp_probe] decid:3

<6>[    0.790958] [audpp.c:audpp_probe] nr_codec_support:4

<6>[    0.790973] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK

<6>[    0.790990] [audpp.c:audpp_probe] queueid:17

<6>[    0.791005] [audpp.c:audpp_probe] decid:4

<6>[    0.791018] [audpp.c:audpp_probe] nr_codec_support:1

<4>[    0.808180] THNAK YOU!!

<4>[    0.808198] fe2f, b9c40000, 100

<4>[    0.808278] [VIB] platform driver register result : 0

<6>[    0.808298] [H2W] h2w_init JACK_S_35(28), SEND_END(29)


<6>[    0.808553] [H2W] Registering H2W (headset) driver

<6>[    0.818070] RPC_TIME_TOD_SET_APPS_BASES:

<6>[    0.818080] 	tick = 77613

<6>[    0.818086] 	stamp = 808464432

<4>[    0.818108] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

<6>[    0.822966] RPC_TIME_TOD_SET_APPS_BASES:

<6>[    0.822976] 	tick = 239854

<6>[    0.822983] 	stamp = 52129629829677919

<4>[    0.823003] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

<6>[    0.823246] [H2W] detect_irq_handler 


<6>[    0.823270] [H2W] detect_irq_handler GPIO_JACK_S_35 is LOW


<6>[    0.823391] Headset Driver: Start gpio inputs for h2w in interrupt mode

<6>[    0.823748] input: europa_headset as /devices/virtual/input/input0

<6>[    0.832911] ashmem: initialized

<6>[    0.834845] msgmni has been set to 367

<6>[    0.835073] alg: No test for cipher_null (cipher_null-generic)

<6>[    0.835245] alg: No test for ecb(cipher_null) (ecb-cipher_null)

<6>[    0.835378] alg: No test for digest_null (digest_null-generic)

<6>[    0.835496] alg: No test for compress_null (compress_null-generic)

<6>[    0.840058] alg: No test for stdrng (krng)

<6>[    0.843301] [H2W] detect_event_timer_func 


<6>[    0.843353] [H2W] detection_work 


<6>[    0.921818] alg: No test for ghash (ghash-generic)

<6>[    0.921898] io scheduler noop registered

<6>[    0.921913] io scheduler deadline registered (default)

<6>[    0.922703] fbaddr cmdline is 0xd4000

<6>[    0.983813] msm_fb_probe:  phy_Addr = 0x2793000 virt = 0xcd900000

<6>[    0.984490] MDP HW Base phy_Address = 0xaa200000 virt = 0xcda00000

<4>[    0.984606] MDP CLK ON

<4>[    0.985056] s6d04m0 start lcdc_s6d04m0_panel_init

<4>[    0.985111] s6d04m0 start s6d04m0_probe

<4>[    0.985220] lcdc_s6d04m0_panel_init

<4>[    1.009125] [HSIL] mdp_lcdc_on(111)  mdp_lcdc_on start

<4>[    1.009150] ==============++minhyodebug : LCD CONTROLLER Registers Setting

<4>[    1.009165] display_hctl = 0x1030014

<4>[    1.009176] display_v_start = 0x14f0

<4>[    1.009186] display_v_end = 0x163ef

<4>[    1.009196] lcdc_border_clr = 0x0

<4>[    1.009206] lcdc_underflow_clr = 0xff

<4>[    1.009218] lcdc_hsync_skew = 0x0

<4>[    1.009226] ctrl_polarity = 0x0

<4>[    1.009236] active_hctl = 0x0

<4>[    1.009246] active_v_start = 0x0

<4>[    1.009255] active_v_end = 0x0

<4>[    1.009906] pc_clk_set_rate id : 42, rate : 8192000

<4>[    1.009976] pc_clk_set_rate id : 0, rate : 8192000

<4>[    1.009986] , rc : 0

<4>[    1.009996] pc_clk_set_rate id : 43, rate : 8192000

<4>[    1.010035] pc_clk_set_rate id : -1, rate : 8192000

<4>[    1.010043] , rc : 0

<4>[    1.010088] s6d04m0 start lcdc_s6d04m0_panel_on

<4>[    1.010103] [HSIL] mdp_lcdc_on(322)  mdp_lcdc_on end

<4>[    1.039125] s6d04m0 lcdc_s6d04m0_set_backlight:255,30

<4>[    1.039306] ldi mtpdata: 51 1c 11

<5>[    1.039316] lcd type is sharp

<4>[    1.047231] Console: switching to colour frame buffer device 30x40

<6>[    1.058471] FrameBuffer[0] 240x320 size=655360 bytes is registered successfully!

<6>[    1.058820] Registered led device: lcd-backlight

<6>[    1.067193] diagfwd initializing ..

<6>[    1.067628] SMD: ch 1 0 -> 1

<6>[    1.067645] diag opened SMD port ; r = 0

<6>[    1.067736] SMD: ch 1 1 -> 2

<6>[    1.067840] diagchar initializing ..

<6>[    1.068095] diagchar initialized

<6>[    1.068216] [drm] Initialized drm 1.1.0 20060810

<6>[    1.068456] msm_serial: driver initialized

<6>[    1.068661] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART

<6>[    1.069073] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART

<6>[    1.069506] msm_serial_hs module loaded

<6>[    1.072586] brd: module loaded

<6>[    1.075830] loop: module loaded

<6>[    1.076010] pmem: Initializing pmem_kernel_ebi1 (in-kernel)

<6>[    1.076115] pmem: Initializing pmem (user-space) as cached

<6>[    1.076821] pmem: Initializing pmem_adsp (user-space) as non-cached

<6>[    1.077401] pmem: Initializing pmem_audio (user-space) as non-cached

<6>[    1.078270] PPP generic driver version 2.4.2

<6>[    1.078526] PPP Deflate Compression module registered

<6>[    1.078545] PPP BSD Compression module registered

<6>[    1.082908] PPP MPPE Compression module registered

<6>[    1.082935] NET: Registered protocol family 24

<6>[    1.083008] PPPoL2TP kernel driver, V1.0

<6>[    1.083030] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

<6>[    1.083051] CSLIP: code copyright 1989 Regents of the University of California.

<6>[    1.083698] tun: Universal TUN/TAP device driver, 1.6

<6>[    1.083716] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<4>[    1.084091] smc91x: not found (-19).

<4>[    1.084286] rmnet_init

<6>[    1.085881] msm_otg_probe: rpc_connect(0)

<4>[    1.085921] pc_clk_set_rate id : 36, rate : 60000000

<4>[    1.085965] pc_clk_set_rate id : -1, rate : 60000000

<4>[    1.085975] , rc : 0

<6>[    1.219381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[    1.219493] msm_hsusb_rpc_connect: usb_ep already connected

<6>[    1.220201] host driver registered w/ tranceiver

<6>[    1.220428] usbcore: registered new interface driver cdc_acm

<6>[    1.220453] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[    1.220966] peripheral driver registered w/ tranceiver

<6>[    1.221036] msm_otg_suspend: usb in low power mode

<6>[    1.221178] adb_function_init

<6>[    1.221820] DUN is registerd

<4>[    1.221918] android_usb gadget: using random self ethernet address

<4>[    1.221950] android_usb gadget: using random host ethernet address

<6>[    1.222473] usb0: MAC a2:c7:cb:d1:16:52

<6>[    1.222491] usb0: HOST MAC 0e:ef:45:3a:25:f5

<6>[    1.222508] mass_storage_function_add

<6>[    1.222816] android_usb gadget: Number of LUNs=1

<6>[    1.223018] android_usb gadget: android_usb ready

<6>[    1.223048] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'

<6>[    1.223821] input: msm_touchscreen as /devices/platform/msm_touchscreen.0/input/input1

<4>[    1.224126] [TSP] synaptics_ts_init

<4>[    1.224418] [gpio_event_matrix_func:571] hw rev = 4

<6>[    1.224711] GPIO Matrix Keypad Driver: Start keypad matrix for europa_keypad0 in interrupt mode

<6>[    1.225026] input: europa_keypad0 as /devices/virtual/input/input2

<7>[    1.225993] RTC Registering with rs30000048

<3>[    1.227266] msm_rpc_client_req: RPC call was not successful (3)

<7>[    1.227291] msmrtc_setup_cb: RPC client registration for PROC:12 failed

<7>[    1.227310] msmrtc_probe: Could not initialize RPC callback

<6>[    1.227820] using rtc device, msm_rtc, for alarms

<7>[    1.227843] msm_rtc: dev (254:0)

<6>[    1.227886] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0

<7>[    1.228085] msm_rtc_secure: dev (254:1)

<6>[    1.228103] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1

<6>[    1.228208] i2c /dev entries driver

<4>[    1.228948] [TSP] synaptics_ts_probe, 277

<6>[    1.339978] synaptics_ts_probe: max_x: 240, max_y: 320

<6>[    1.340301] input: synaptics-rmi-touchscreen as /devices/virtual/input/input3

<4>[    1.340500] [TSP] synaptics_ts_probe, irq=83

<6>[    1.340616] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode

<4>[    1.340788] [TSP] synaptics_ts_probe, ver CY=a0

<4>[    1.340805] [TSP] synaptics_ts_probe, ver HW=2

<4>[    1.340820] [TSP] synaptics_ts_probe, ver SW=9

<6>[    1.340835] synaptics_ts_probe: Manufacturer ID: a0, HW ver=2

<6>[    1.341020] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)

<6>[    1.341503] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)

<6>[    1.341810] i2c-gpio i2c-gpio.4: using pins 37 (SDA) and 36 (SCL)

<6>[    1.341995] [FSA9280]: probe

<6>[    1.342010] [FSA9280]: init

<4>[    1.343020] [FSA9280]: Initial control reg 0x02 : 0x1e

<6>[    1.359140] [FSA9280]: fsa9280 sensor init sequence done

<6>[    1.359216] [FSA9280]: probe complete

<6>[    1.359295] BMA_init

<6>[    1.359545] bma_probe

<4>[    1.359560] [bma_probe] slave addr = 38

<6>[    1.359793] Bosch Sensortec Device detected!

<6>[    1.359803] BMA023 registered I2C driver!

<6>[    1.359983] bma accel device create ok

<6>[    1.361086] mmc31xx driver: init

<3>[    1.361290] [mmc31xx_probe] +

<3>[    1.379125] [mmc31xx_probe] -

<6>[    1.379203] ecompass driver: init

<6>[    1.379516] input: ecompass_data as /devices/virtual/input/input4

<6>[    1.379816] taos_opt_init

<4>[    1.379876] [taos_opt_probe] slave addr = 39

<4>[    1.392580] [HSS] opt_i2c_write 233 i2c transfer error : reg = [80]

<4>[    1.393256] [HSS] opt_i2c_write 233 i2c transfer error : reg = [81]

<4>[    1.393928] [HSS] opt_i2c_write 233 i2c transfer error : reg = [82]

<4>[    1.394601] [HSS] opt_i2c_write 233 i2c transfer error : reg = [83]

<4>[    1.395275] [HSS] opt_i2c_write 233 i2c transfer error : reg = [8E]

<4>[    1.395948] [HSS] opt_i2c_write 233 i2c transfer error : reg = [8F]

<4>[    1.396620] [HSS] opt_i2c_write 233 i2c transfer error : reg = [80]

<3>[    1.409316] [TAOS] i2c_smbus_read_byte error!!

<6>[    1.409391] Linux video capture interface: v2.00

<4>[    1.410178] pc_clk_set_rate id : 41, rate : 24000000

<4>[    1.410341] pc_clk_set_rate id : 0, rate : 24000000

<4>[    1.410351] , rc : 0

<4>[    1.415358] <=PCAM=> cam_pw start

<4>[    1.416363] [Battery] msm_batt_init

<3>[    1.416596] [Battery] msm_batt_probe 

<6>[    1.417903] batt_clnt_handle = 0

<6>[    1.418560] msm_batt_enable_filter: vbatt Filter enabled successfully.

<3>[    1.451176] [Battery] get_charger_type charger_type is (0)

<4>[    1.451198] [Battery] get_charger_type : wake_lock_timeout!!! !!!!

<4>[    1.451421] [Battery] get_charging_status : event_flag =0 

<4>[    1.451631] [Battery] Charging state is changed [ff]=>[0]   Batt Level [3550]   Percent [100]

<6>[    1.452921] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com

<6>[    1.453226] device-mapper: multipath: version 1.1.0 loaded

<6>[    1.453248] device-mapper: multipath round-robin: version 1.0.0 loaded

<6>[    1.453268] device-mapper: multipath queue-length: version 0.1.0 loaded

<6>[    1.453288] device-mapper: multipath service-time: version 0.2.0 loaded

<6>[    1.453601] Bluetooth: HCI UART driver ver 2.2

<6>[    1.453620] Bluetooth: HCI H4 protocol initialized

<6>[    1.453635] Bluetooth: HCI BCSP protocol initialized

<7>[    1.453650] bluetooth_power_init

<7>[    1.453743] bt_power_probe

<6>[    1.454038] Bluetooth: MSM Sleep Mode Driver Ver 1.1

<4>[    1.454831] pc_clk_set_rate id : 19, rate : 144000

<4>[    1.454891] pc_clk_set_rate id : 0, rate : 144000

<4>[    1.454901] , rc : 0

<6>[    1.455375] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8

<6>[    1.455393] mmc0: 8 bit data mode disabled

<6>[    1.455408] mmc0: 4 bit data mode enabled

<6>[    1.455421] mmc0: polling status mode disabled

<6>[    1.455440] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz

<6>[    1.455456] mmc0: Slot eject status = 0

<6>[    1.455470] mmc0: Power save feature enable = 1

<6>[    1.455488] mmc0: DM non-cached buffer at ffc12000, dma_addr 0x0100d000

<6>[    1.455510] mmc0: DM cmd busaddr 0x0100d000, cmdptr busaddr 0x0100d300

<4>[    1.455670] pc_clk_set_rate id : 21, rate : 144000

<4>[    1.455718] pc_clk_set_rate id : 0, rate : 144000

<4>[    1.455726] , rc : 0

<6>[    1.456095] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8

<6>[    1.456113] mmc1: 8 bit data mode disabled

<6>[    1.456126] mmc1: 4 bit data mode enabled

<6>[    1.456140] mmc1: polling status mode disabled

<6>[    1.456158] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz

<6>[    1.456175] mmc1: Slot eject status = 1

<6>[    1.456188] mmc1: Power save feature enable = 1

<6>[    1.456206] mmc1: DM non-cached buffer at ffc13000, dma_addr 0x0100f000

<6>[    1.456226] mmc1: DM cmd busaddr 0x0100f000, cmdptr busaddr 0x0100f300

<6>[    1.458101] usbcore: registered new interface driver usbhid

<6>[    1.458126] usbhid: v2.6:USB HID core driver

<6>[    1.559263] 

<6>[    1.559270] ========== kernel thread : gaf-proc ==========

<6>[    1.559288] task_struct at cc5b2040

<6>[    1.559301] thread_info at c0e24000

<6>[    1.559308] 

<6>[    1.559320] saved_cpu_context at c0e2401c

<6>[    1.559340] c0e2401c r4 :cc5b2040 r5 :cc5b21cc r6 :c068b000 r7 :00000000

<6>[    1.559363] c0e2402c r8 :cc5bac60 r9 :00000000 r10:c04b52f0 r11:c0e25f04

<6>[    1.559383] c0e2403c sp :c0e25ee0 pc :c04b4b54 

<6>[    1.559393] 

<6>[    1.559406] searching saved pc which is stopped in schedule_timeout() from c0e25ee0 to c0e26000

<6>[    1.559428] schedule_timeout() is from c04b52cc to c04b55dc

<6>[    1.559440] 

<6>[    1.559453] pc (c04b52f0) is found at c0e25f00

<6>[    1.559471] c0e25ed4 r4 :xxxxxxxx r5 :c0030e84 r6 :c00c337c r7 :7fffffff

<6>[    1.559495] c0e25ee4 r8 :cc5b2040 r9 :c04b64d4 r10:00000000 r11:00000000

<6>[    1.559518] c0e25ef4 r12:00000000 sp :c0e25f64 lr :c0e25f08 pc :c04b52f0

<6>[    1.559535] ===================

<6>[    1.559541] 

<6>[    1.559728] logger: created 512K log 'log_main'

<6>[    1.559883] logger: created 256K log 'log_events'

<6>[    1.560028] logger: created 256K log 'log_radio'

<6>[    1.560191] logger: created 64K log 'log_system'

<4>[    1.561866] [Silent Value] : 0

<6>[    1.562110] Advanced Linux Sound Architecture Driver Version 1.0.21.

<4>[    1.562543] No device for DAI CODEC_DAI

<4>[    1.562561] No device for DAI CPU_DAI

<3>[    1.562780] msm_soc: create pcms

<6>[    1.563105] asoc: CODEC_DAI <-> CPU_DAI mapping ok

<3>[    1.563121] msm_soc: ALSA MSM Mixer Setting

<6>[    1.563888] ALSA device list:

<6>[    1.563905]   #0: msm-audio (MSM-CARD)

<4>[    1.564033] Netfilter messages via NETLINK v0.30.

<4>[    1.564143] nf_conntrack version 0.5.0 (2943 buckets, 11772 max)

<4>[    1.564421] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

<4>[    1.564441] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

<4>[    1.564460] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

<6>[    1.564706] xt_time: kernel timezone is -0000

<6>[    1.565001] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    1.565203] TCP cubic registered

<6>[    1.565561] NET: Registered protocol family 10

<6>[    1.567115] IPv6 over IPv4 tunneling driver

<6>[    1.567926] NET: Registered protocol family 17

<6>[    1.567981] Bluetooth: L2CAP ver 2.14

<6>[    1.567993] Bluetooth: L2CAP socket layer initialized

<6>[    1.568016] Bluetooth: SCO (Voice Link) ver 0.6

<6>[    1.568030] Bluetooth: SCO socket layer initialized

<6>[    1.568235] Bluetooth: RFCOMM TTY layer initialized

<6>[    1.568260] Bluetooth: RFCOMM socket layer initialized

<6>[    1.568275] Bluetooth: RFCOMM ver 1.11

<6>[    1.568291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[    1.568306] Bluetooth: BNEP filters: protocol multicast

<6>[    1.568323] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[    1.568883] clock_late_init() disabled 17 unused clocks

<6>[    1.569676] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

<6>[    1.581973] [drm] Initialized kgsl 2.1.1 20100127 on minor 0

<7>[    1.583740] msmrtc_tod_proc_result: 07/10/2011 00:42:42 (06)

<6>[    1.583790] rs30000048 rs30000048.65536: setting system clock to 2011-07-10 00:42:42 UTC (1310258562)

<6>[    1.583820] msm_v4l2: msm_v4l2_init

<4>[    1.586518] multipdp_init:multipdp_rx_noti_regi calling

<6>[    1.586778] Freeing init memory: 160K

<4>[    1.586843] Warning: unable to open an initial console.

<4>[    1.701558] pdp_activate(): ttyCSD(id: 1) serial device is created.

<4>[    1.701841] pdp_activate(): ttyEFS(id: 8) serial device is created.

<4>[    1.702073] pdp_activate(): ttyGPS(id: 5) serial device is created.

<4>[    1.702293] pdp_activate(): ttyXTRA(id: 6) serial device is created.

<4>[    1.702521] pdp_activate(): ttySMD(id: 25) serial device is created.

<3>[    1.736428] init: cannot open '/initlogo.rle'

<4>[    1.789628] fsr: module license 'Samsung Proprietary' taints kernel.

<4>[    1.789669] Disabling lock debugging due to kernel taint

<4>[    1.842141] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)


<4>[    1.842169] [PAM:aaaaaaaa   ] ++FSR_PAM_Init


<4>[    1.842229] [PAM:   ] --FSR_PAM_Init


<4>[    1.842413] [BIF:   ]   FSR VERSION: FSR_1.2.1p1_b139_RTM


<4>[    1.842456] [OND:INF]   FSR_OND_4K_Open(nDev:0, pParam:0xcd4e3e18, nFlag:0x00000000) / 1095 line


<4>[    1.842481]             pstOND4kCxt->nBaseAddr: 0x00000000


<4>[    1.842508]             nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x013e


<4>[    1.842531] [OND:INF]   pstOND4kCxt->nSysConf1:0xc0e2 / 1178 line


<4>[    1.842553] [OND:INF]   pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1195 line


<4>[    1.842588] [OND:INF]   pstOND4kCxt->nIntID   :0x0000 / 1298 line


<4>[    1.842606] [OND:INF]   1X_CACHEPGM CMD : 0x007f


<4>[    1.842621] [OND:INF]   1X_PLOAD    CMD : 0x0003


<4>[    1.843121] [BBM:INF]   Scan from 2004 to 2047 to find BML meta blocks (die: 0)


<4>[    1.843508] [BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff 


<4>[    1.847054] [BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff 


<4>[    1.850709] [BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff 


<4>[    1.854266] [BBM:INF]   ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff 


<4>[    1.857811] [BBM:INF]   a5a5 a5a5 ffff 


<4>[    1.920559] [BBM:   ]  << DevNO:0, DieNO: 0 MAPPING INFORMATION >>


<4>[    1.920579] [BBM:   ]   Bad Mark Information


<4>[    1.920596] [BBM:   ]      - Bad Mark (0x2222) by erase error


<4>[    1.920614] [BBM:   ]      - Bad Mark (0x4444) by write error


<4>[    1.920664] [BBM:   ]   << Total : 0 BAD-MAPPING INFORMATION >>


<4>[    1.920683] [BIF:   ]   nPartition Information (nVol : 0)


<4>[    1.920699]             nVer : 0x10000


<4>[    1.920721]             00 / nID:0x01 / nAttr:0x00001012 / 1stVun:    0 / Units:    6


<4>[    1.920748]             01 / nID:0x02 / nAttr:0x00001012 / 1stVun:    6 / Units:    2


<4>[    1.920773]             02 / nID:0x03 / nAttr:0x00001012 / 1stVun:    8 / Units:    3


<4>[    1.920801]             03 / nID:0x04 / nAttr:0x00001012 / 1stVun:   11 / Units:  100


<4>[    1.920826]             04 / nID:0x23 / nAttr:0x00001101 / 1stVun:  111 / Units:   97


<4>[    1.920853]             05 / nID:0x25 / nAttr:0x00001101 / 1stVun:  208 / Units:   20


<4>[    1.920879]             06 / nID:0x05 / nAttr:0x00001001 / 1stVun:  228 / Units:  100


<4>[    1.920906]             07 / nID:0x06 / nAttr:0x00001012 / 1stVun:  328 / Units:    8


<4>[    1.920933]             08 / nID:0x07 / nAttr:0x00001012 / 1stVun:  336 / Units:   40


<4>[    1.920959]             09 / nID:0x08 / nAttr:0x00001012 / 1stVun:  376 / Units:   40


<4>[    1.920986]             10 / nID:0x09 / nAttr:0x00001012 / 1stVun:  416 / Units:    3


<4>[    1.921013]             11 / nID:0x21 / nAttr:0x00001101 / 1stVun:  419 / Units:  710


<4>[    1.921039]             12 / nID:0x22 / nAttr:0x00001101 / 1stVun: 1129 / Units:  775


<4>[    1.921066]             13 / nID:0x24 / nAttr:0x00001101 / 1stVun: 1904 / Units:  100


<4>[    1.921113] [BBM:INF]   The registered blocks in ERL are handled


<4>[    1.921131] [BBM:INF]   (number of blocks: 0)


<4>[    1.931909] BML: Registered BML Driver.

<4>[    1.931933] [fsr_init] BML functions for DGS are initialized

<4>[    1.978044] pc_clk_set_rate id : 19, rate : 49152000

<4>[    1.978133] pc_clk_set_rate id : 0, rate : 49152000

<4>[    1.978141] , rc : 0

<4>[    1.978303] mmc0: host does not support reading read-only switch. assuming write-enable.

<6>[    1.978341] mmc0: new high speed SDHC card at address 1234

<6>[    1.989218] mmcblk0: mmc0:1234 SA04G 3.68 GiB 

<6>[    1.989539]  mmcblk0: p1 p2 p3

<4>[    1.995551] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)


<4>[    1.995583] [BIF:   ]   FSR_BML_Init(nFlag:0x0, nRe:FSR_BML_ALREADY_INITIALIZED) / 1034 line


<4>[    2.005769] FSR: Registered STL Driver.

<3>[    2.288073] init: Unable to open persistent property directory /data/property errno: 2

<6>[    2.296443] acmdata_register

<6>[    2.296468] diag_function_add

<6>[    2.296489] mass_storage_function_add

<6>[    2.297044] android_usb gadget: Number of LUNs=1

<6>[    2.297071] android_usb gadget: adb_function_add

<6>[    2.297386] android_usb gadget: android_usb ready

<6>[    2.297419] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'

<4>[    2.370799] [BIF:   ]   FSR VERSION: FSR_1.2.1p1_b139_RTM


<4>[    2.370839] [BIF:   ]   FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1178 line


<4>[    2.370943] [SIF:INF]   ===> STL Clst[ 4] Scan Root Info


<4>[    2.372321] [SIF:INF]   ===> STL Zone[ 4, 0] Open Zone Meta


<4>[    2.374569] [SIF:INF]   Latest Header Index        (    1)  Vbn    (    3) 


<4>[    2.378079] [SIF:INF]   Latest Header Clean Page Offset          (    9) 


<4>[    2.378099] [SIF:INF]   POR write timer     : 0xc


<4>[    2.378478] [SIF:INF]   Latest Context BlockIdx    (    1)  Offset (    8)  Vpn (  200) 


<4>[    2.378856] [SIF:INF]   Number of Free Block       (   11) 


<4>[    2.378874] [SIF:INF]   Active Log List     : Num  (    7) 


<4>[    2.378896] [SIF:INF]   ===> STL Zone[ 4, 0] Open Zone Post


<4>[    2.381246] [SIF:INF]   ===> STL Zone[ 4, 0] Validity check


<4>[    2.381286] [SIF:INF]   Partition [0, 24] open is success


<4>[    2.388638] [SIF:INF]   Zone[ 4, 0]: nDgn(    0) nVbn(   66) S(  0)-E( 15) nCPOffs( 16)


<4>[    2.411034] [SIF:INF]   Zone[ 4, 0]: nDgn(    1) nVbn(   67) S(  0)-E( 19) nCPOffs( 20)


<4>[    2.433646] [SIF:INF]   Zone[ 4, 0]: nDgn(    2) nVbn(   39) S(  0)-E( 24) nCPOffs( 25)


<6>[    2.444989] EXT4-fs (stl14): recovery complete

<6>[    2.445329] EXT4-fs (stl14): mounted filesystem with writeback data mode

<4>[    2.446783] [SIF:INF]   Zone[ 4, 0]: nDgn(   17) nVbn(   62) S(  0)-E(  0) nCPOffs(  1)


<4>[    2.481799] [SIF:INF]   Zone[ 4, 0]: nDgn(   24) nVbn(   69) S(  0)-E(  1) nCPOffs(  2)


<4>[    2.485481] [SIF:INF]   Zone[ 4, 0]: nDgn(   72) nVbn(   68) S(  0)-E(  1) nCPOffs(  2)


<4>[    2.490619] JBD: barrier-based sync failed on stl14-8 - disabling barriers

<3>[   18.333678] [Battery] battery_restart

<6>[   18.333958] msm_otg_resume: usb exited from low power mode

<6>[   18.335796] VBUS - (ON)

<6>[   18.336264] msm_hsusb msm_hsusb: msm72k_udc: OFFLINE -> ONLINE

<6>[   18.492584] msm_hsusb msm_hsusb: suspend

<6>[   18.603314] msm_hsusb msm_hsusb: reset

<6>[   18.605559] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH

<6>[   18.647561] msm_hsusb msm_hsusb: reset

<6>[   18.649828] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH

<6>[   18.738794] android_usb gadget: high speed config #1: android

<4>[   18.738909] acm_disconnected

<7>[   18.740171] diag: USB connected

<3>[   18.742659] msm_hsusb_send_serial_number: rpc call failed! error: -22

<6>[   19.489286] 

<6>[   19.489323] Charger Type: STD DOWNSTREAM PORT

<4>[   20.617016] key event (keycode:103, pressed:1), wlan_debug_step=0

<4>[   20.799419] key event (keycode:103, pressed:0), wlan_debug_step=0

<4>[   20.945948] key event (keycode:103, pressed:1), wlan_debug_step=0

<4>[   21.067768] key event (keycode:103, pressed:0), wlan_debug_step=0

<4>[   21.361668] key event (keycode:103, pressed:1), wlan_debug_step=0

<4>[   21.483488] key event (keycode:103, pressed:0), wlan_debug_step=0

<4>[   21.650516] key event (keycode:232, pressed:1), wlan_debug_step=0

<4>[   21.792401] key event (keycode:232, pressed:0), wlan_debug_step=0

<4>[   22.005654] key event (keycode:103, pressed:1), wlan_debug_step=0

<4>[   22.147714] key event (keycode:103, pressed:0), wlan_debug_step=0

<4>[   22.350164] key event (keycode:232, pressed:1), wlan_debug_step=0

<4>[   22.471949] key event (keycode:232, pressed:0), wlan_debug_step=0

<4>[   45.779301] [DP] do drop_caches

<4>[  346.306674] PARAM booting_now : 0

<4>[  346.306749] PARAM fota_mode   : 0

<4>[  346.306806] PARAM efs_info	  : CTI

<4>[  346.307511] PARAM booting_now : 0

<4>[  346.307568] PARAM fota_mode   : 0

<4>[  346.307623] PARAM efs_info	  : CTI

<4>[  346.308474] PARAM booting_now : 0

<4>[  346.308536] PARAM fota_mode   : 0

<4>[  346.308591] PARAM efs_info	  : CTI

<4>[  346.308644] PARAM keystr	  : 

<4>[  346.310328] PARAM booting_now : 0

<4>[  346.310396] PARAM fota_mode   : 0

<4>[  346.310451] PARAM efs_info	  : CTI

<4>[  346.310506] PARAM keystr	  : 

<4>[  346.312384] LinuStoreIII_NERR: stl_seq_start[931] out of input value

<4>[  346.312446]