ptpt52/qsdk mp03.5-c1 256M ipq5018+qcn61xx boot log

## qsdk mp03.5-c1 256M ipq5018+qcn61xx boot log
Hit any key within 10s to stop dump activity...resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00059
S - IMAGE_VARIANT_STRING=MAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c1
B -       128 - PBL, Start
B -      1562 - bootable_media_detect_entry, Start
B -      1739 - bootable_media_detect_success, Start
B -      1744 - elf_loader_entry, Start
B -     10164 - auth_hash_seg_entry, Start
B -     10525 - auth_hash_seg_exit, Start
B -    174921 - elf_segs_hash_verify_entry, Start
B -    237561 - PBL, End
B -    192638 - SBL1, Start
B -    254034 - GCC [RstStat:0x10, RstDbg:0x400100] WDog Stat : 0x4
B -    262330 - clock_init, Start
D -      7289 - clock_init, Delta
B -    269803 - boot_flash_init, Start
D -      2775 - boot_flash_init, Delta
B -    273890 - boot_config_data_table_init, Start
D -       793 - boot_config_data_table_init, Delta - (575 Bytes)
B -    287035 - Boot Setting :  0x00023ecc
B -    289902 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:4
B -    300303 - sbl1_ddr_set_params, Start
B -    305427 - Pre_DDR_clock_init, Start
B -    307226 - Pre_DDR_clock_init, End
B -    951600 - do ddr sanity test, Start
D -        30 - do ddr sanity test, Delta
B -    956266 - Image Load, Start
D -    132828 - QSEE Image Loaded, Delta - (578956 Bytes)
B -   1090009 - Image Load, Start
D -      5734 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B -   1095956 - Image Load, Start
D -    100528 - APPSBL Image Loaded, Delta - (417230 Bytes)
B -   1196576 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -   1203042 - SBL1, End
D -   1012905 - SBL1, Delta
S - Flash Throughput, 4764 KB/s  (1011025 Bytes,  212210 us)
S - DDR Frequency, 666 MHz
S - Core 0 Frequency, 800 MHz


U-Boot 2016.01 (Aug 12 2021 - 09:21:56 +0000)

DRAM:  smem ram ptable found: ver: 1 len: 4
256 MiB
NAND:  QPIC controller support serial NAND
ID = 41c841c8
Vendor = c8
Device = 41
Serial Nand Device Found With ID : 0xc8 0x41
Serial NAND device Manufacturer:GD5F1GQ5REYIG
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit
qpic_nand: changing oobsize to 80 from 128 bytes
SPI_ADDR_LEN=3
SF: Detected GD25LQ128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x1000000
272 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI Link Intialized
In:    serial@78AF000
Out:   serial@78AF000
Err:   serial@78AF000
machid: 8040004
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Hit any key to stop autoboot:  0

Net:   cmbblk is stable 5
MAC0 addr:0:11:22:33:44:55
PHY ID1: 0x4d
PHY ID2: 0xd0c0
MAC1 addr:0:11:22:33:44:56
athrs17_reg_init: complete
athrs17_vlan_config ...done
S17c init  done
eth0, eth1
IPQ5018#
IPQ5018#
IPQ5018#
IPQ5018# tftpboot xx.bin
eth0  Down Speed :10 Half duplex
Port1 Down Speed :10M Half duplex
Port2 Up Speed :1000M Full duplex
Using eth1 device
TFTP from server 192.168.10.19; our IP address is 192.168.10.10
Filename 'xx.bin'.
Load address: 0x44000000
Loading: *
Got TFTP_OACK: TFTP remote port: changes from 69 to 63490
#################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #####################
         4.7 MiB/s
done
Bytes transferred = 33700092 (20238fc hex)
IPQ5018# imgaddr=0x44000000 && source $imgaddr:script
## Executing script at 44000000
crc32+ SPI_ADDR_LEN=3
SF: Detected GD25LQ128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
soc_hw_version : Validation success
machid : Validation success
Flashing sbl1:                          [ done ]
Flashing mibib:                         [ done ]
Flashing bootconfig:                    [ done ]
Flashing bootconfig1:                   [ done ]
Flashing tz:                            [ done ]
Flashing devcfg:                        [ done ]
Flashing ddr-AP-MP03.5-C1_128M16_DDR3:  [ done ]
Flashing u-boot:                        [ done ]
Flashing ubi:                           [ done ]
Flashing wifi_fw_ipq5018_qcn6122cs:     [ done ]
IPQ5018# reset
resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00059
S - IMAGE_VARIANT_STRING=MAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c1
B -       128 - PBL, Start
B -      1562 - bootable_media_detect_entry, Start
B -      1739 - bootable_media_detect_success, Start
B -      1744 - elf_loader_entry, Start
B -     10169 - auth_hash_seg_entry, Start
B -     10524 - auth_hash_seg_exit, Start
B -    174841 - elf_segs_hash_verify_entry, Start
B -    237477 - PBL, End
B -    192577 - SBL1, Start
B -    253973 - GCC [RstStat:0x10, RstDbg:0x500100] WDog Stat : 0x4
B -    262269 - clock_init, Start
D -      7350 - clock_init, Delta
B -    269803 - boot_flash_init, Start
D -      2775 - boot_flash_init, Delta
B -    273859 - boot_config_data_table_init, Start
D -       762 - boot_config_data_table_init, Delta - (575 Bytes)
B -    287035 - Boot Setting :  0x00033ecc
B -    289872 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:4
B -    300303 - sbl1_ddr_set_params, Start
B -    305427 - Pre_DDR_clock_init, Start
B -    307226 - Pre_DDR_clock_init, End
B -    951569 - do ddr sanity test, Start
D -        61 - do ddr sanity test, Delta
B -    956236 - Image Load, Start
D -    132827 - QSEE Image Loaded, Delta - (578956 Bytes)
B -   1089978 - Image Load, Start
D -      5734 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B -   1095956 - Image Load, Start
D -    100528 - APPSBL Image Loaded, Delta - (417230 Bytes)
B -   1196576 - QSEE Execution, Start
D -        30 - QSEE Execution, Delta
B -   1203011 - SBL1, End
D -   1012935 - SBL1, Delta
S - Flash Throughput, 4765 KB/s  (1011025 Bytes,  212147 us)
S - DDR Frequency, 666 MHz
S - Core 0 Frequency, 800 MHz


U-Boot 2016.01 (Aug 12 2021 - 09:21:56 +0000)

DRAM:  smem ram ptable found: ver: 1 len: 4
256 MiB
NAND:  QPIC controller support serial NAND
ID = 41c841c8
Vendor = c8
Device = 41
Serial Nand Device Found With ID : 0xc8 0x41
Serial NAND device Manufacturer:GD5F1GQ5REYIG
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit
qpic_nand: changing oobsize to 80 from 128 bytes
SPI_ADDR_LEN=3
SF: Detected GD25LQ128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x1000000
272 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI Link Intialized
In:    serial@78AF000
Out:   serial@78AF000
Err:   serial@78AF000
machid: 8040004
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Hit any key to stop autoboot:  0
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "mtd=0", size 62 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 496, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 766247865
ubi0: available PEBs: 0, total reserved PEBs: 496, PEBs reserved for bad PEB handling: 40
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (3840744)
## Loading kernel from FIT Image at 44000000 ...
   Using 'config@mp03.5-c1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-4.4.60
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x440000e4
     Data Size:    2411168 Bytes = 2.3 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x41208000
     Entry Point:  0x41208000
     Hash algo:    crc32
     Hash value:   c1125cb7
     Hash algo:    sha1
     Hash value:   bb0b41b9d141e95d88ef14e757c9a832c5174695
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
   Using 'config@mp03.5-c1' configuration
   Trying 'fdt@mp03.5-c1' fdt subimage
     Description:  ARM OpenWrt qcom-ipq50xx-mpxx device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x442d01b0
     Data Size:    59559 Bytes = 58.2 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   f0dc6a69
     Hash algo:    sha1
     Hash value:   d6df5cb5a7a6896be4124540bea198b24e848c09
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x442d01b0
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 4a3ee000, end 4a3ff8a6 ... OK
Using machid 0x8040004 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.60 (ptpt52@SC-GAME) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 3e1428c+r49254) ) #297 SMP PREEMPT Fri Aug 13 06:45:00 UTC 2021
[    0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[    0.000000] Reserved memory: OVERLAP DETECTED!
[    0.000000] q6_mem_regions@4B000000 (0x4b000000--0x4e400000) overlaps with q6_code_data@4B000000 (0x4b000000--0x4b060000)
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 11 pages/cpu @8fd7d000 s14592 r8192 d22272 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 47552
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 182428K/192512K available (4915K kernel code, 281K rwdata, 1032K rodata, 1024K init, 323K bss, 10084K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0x90800000 - 0xff800000   (1776 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x90000000   ( 256 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .text : 0x81208000 - 0x818cef38   (6940 kB)
[    0.000000]       .init : 0x81900000 - 0x81a00000   (1024 kB)
[    0.000000]       .data : 0x81a00000 - 0x81a465d8   ( 282 kB)
[    0.000000]        .bss : 0x81a49000 - 0x81a99df8   ( 324 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] GICv2m: Node v2m: range[0xb00a000:0xb00affc], SPI[448:480]
[    0.000000] GICv2m: Node v2m: range[0xb00b000:0xb00bffc], SPI[480:512]
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000018] Switching to timer-based delay loop, resolution 41ns
[    0.000505] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000521] pid_max: default: 32768 minimum: 301
[    0.000628] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000640] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001297] Initializing cgroup subsys io
[    0.001324] Initializing cgroup subsys memory
[    0.001358] Initializing cgroup subsys devices
[    0.001374] Initializing cgroup subsys freezer
[    0.001395] Initializing cgroup subsys net_cls
[    0.001408] Initializing cgroup subsys pids
[    0.001444] CPU: Testing write buffer coherency: ok
[    0.001885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001925] Setting up static identity map for 0x41300000 - 0x41300058
[    0.050078] MSM Memory Dump base table set up
[    0.050110] MSM Memory Dump apps data table set up
[    0.090439] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.090570] Brought up 2 CPUs
[    0.090588] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.090595] CPU: All CPU(s) started in SVC mode.
[    0.104856] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4
[    0.105192] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.105216] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.105414] pinctrl core: initialized pinctrl subsystem
[    0.106554] NET: Registered protocol family 16
[    0.108014] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.130229] cpuidle: using governor ladder
[    0.160253] cpuidle: using governor menu
[    0.160509] NET: Registered protocol family 42
[    0.165258] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[    0.169812] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.171326] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.184684] CPU: IPQ5018, SoC Version: 1.1
[    0.186429] IPC logging disabled
[    0.186439] IPC logging disabled
[    0.186444] IPC logging disabled
[    0.186449] IPC logging disabled
[    0.186453] IPC logging disabled
[    0.186697] sps:sps is ready.
[    0.222231] pps_core: LinuxPPS API ver. 1 registered
[    0.222244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.222278] PTP clock support registered
[    0.224160] Advanced Linux Sound Architecture Driver Initialized.
[    0.224968] clocksource: Switched to clocksource arch_sys_counter
[    0.227251] NET: Registered protocol family 2
[    0.228060] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.228096] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.228139] TCP: Hash tables configured (established 2048 bind 2048)
[    0.228200] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.228225] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.228418] NET: Registered protocol family 1
[    0.237064] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.237078] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.241621] Key type asymmetric registered
[    0.241637] Asymmetric key parser 'x509' registered
[    0.241669] io scheduler noop registered
[    0.241677] io scheduler deadline registered (default)
[    0.250282] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    0.250786] bt_driver 1943008.bt: bt_parse_ipc
[    0.250844] bt_driver 1943008.bt: bt_parse_mem
[    0.250892] bt_driver 1943008.bt: bt_parse_dt operating in secure mode
[    0.252049] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 154, base_baud = 0) is a EUD UART
[    0.253525] Registered Sucessfully
[    0.254093] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.254151] msm_serial 78af000.serial: uartclk = 1843199
[    0.254204] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 20, base_baud = 115199) is a MSM
[    0.254235] msm_serial: console setup on port #0
[    0.900107] console [ttyMSM0] enabled
[    0.905325] msm_serial: driver initialized
[    0.908704] msm_serial_hsl_init: driver initialized
[    0.919841] loop: module loaded
[    0.920285] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.923755] m25p80 spi32766.0: found gd25lb128d, expected n25q128a11
[    0.929126] m25p80 spi32766.0: gd25lb128d (16384 Kbytes)
[    0.935497] 14 ofpart partitions found on MTD device spi32766.0
[    0.940706] Creating 14 MTD partitions on "spi32766.0":
[    0.946373] 0x000000000000-0x000000030000 : "0:SBL1"
[    0.952680] 0x000000030000-0x000000040000 : "0:MIBIB"
[    0.957892] 0x000000040000-0x000000050000 : "0:BOOTCONFIG"
[    0.962843] 0x000000050000-0x000000060000 : "0:BOOTCONFIG1"
[    0.968232] 0x000000060000-0x000000100000 : "0:QSEE"
[    0.973569] 0x000000100000-0x0000001a0000 : "0:QSEE_1"
[    0.978818] 0x0000001a0000-0x0000001b0000 : "0:DEVCFG"
[    0.983721] 0x0000001b0000-0x0000001c0000 : "0:DEVCFG_1"
[    0.988906] 0x0000001c0000-0x0000001d0000 : "0:CDT"
[    0.994366] 0x0000001d0000-0x0000001e0000 : "0:CDT_1"
[    0.999032] 0x0000001e0000-0x0000001f0000 : "0:APPSBLENV"
[    1.004164] 0x0000001f0000-0x000000290000 : "0:APPSBL"
[    1.009667] 0x000000290000-0x000000330000 : "0:APPSBL_1"
[    1.014593] 0x000000330000-0x0000003a0000 : "0:ART"
[    1.021094] QPIC controller hw version Major:2, Minor:1
[    1.023603] QPIC controller support serial nand.
[    1.029174] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x41
[    1.033676] nand: GigaDevice GD5F1GQ5REYIG SPI NAND 1G
[    1.040044] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    1.045616] 3 ofpart partitions found on MTD device qcom_nand.0
[    1.052513] Creating 3 MTD partitions on "qcom_nand.0":
[    1.058449] 0x000000000000-0x000000080000 : "0:TRAINING"
[    1.075573] 0x000000080000-0x000003e80000 : "rootfs"
[    1.120567] mtd: device 15 (rootfs) set to be root filesystem
[    1.120811] mtdsplit: no squashfs found in "rootfs"
[    1.125342] 0x000003e80000-0x000007c80000 : "rootfs_1"
[    1.186194] libphy: Fixed MDIO Bus: probed
[    1.404975] qca-mdio 88000.mdio: Could not find phy-reset-gpio
[    1.405155] libphy: qca_mdio: probed
[    1.425417] qca-mdio 88000.mdio: qca-mdio driver was registered
[    1.864993] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[    1.865174] libphy: qca_mdio: probed
[    1.871350] qca-mdio 90000.mdio: qca-mdio driver was registered
[    1.975259] cnss: INFO: IPC Logging is disabled!
[    1.975933] cnss[2]: INFO: Platform driver probed successfully. plat 8f298010 tgt 0xfffc
[    1.979343] cnss[41]: INFO: Platform driver probed successfully. plat 8f2a0010 tgt 0xfffb
[    1.987427] i2c /dev entries driver
[    1.996327] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    2.000139] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[    2.005149] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz
[    2.012381] sdhci: Secure Digital Host Controller Interface driver
[    2.020940] sdhci: Copyright(c) Pierre Ossman
[    2.026918] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.032410]
[    2.032410] Version Rollback Feature Disabled
[    2.039484] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss
[    2.042758] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available
[    2.051403] q6v5_wcss_userpd1(8fda387c) node found
[    2.058921] platform q6v5_wcss_userpd1: ssr registeration success q6v5_wcss_userpd1
[    2.062810] remoteproc remoteproc1: q6v5_wcss_userpd1 is available
[    2.070366] q6v5_wcss_userpd2(8fda3b20) node found
[    2.077534] platform q6v5_wcss_userpd2: ssr registeration success q6v5_wcss_userpd2
[    2.081374] remoteproc remoteproc2: q6v5_wcss_userpd2 is available
[    2.089367] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[    2.095243] coresight-csr 6001000.csr: CSR initialized
[    2.102869] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[    2.107831] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[    2.115374] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[    2.122694] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[    2.130114] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[    2.137486] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[    2.144827] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[    2.152239] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[    2.159622] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[    2.166987] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[    2.174342] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[    2.181762] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[    2.189148] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[    2.196508] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[    2.203855] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[    2.211282] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[    2.218660] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
[    2.226208] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
[    2.233509] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
[    2.241033] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06064000
[    2.247987] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06064000
[    2.263658] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06064000
[    2.278165] sps:BAM 0x06064000 is registered.[    2.285344] coresight-tmc 6048000.tmc: TMC initialized
[    2.289453] coresight-tmc 6047000.tmc: TMC initialized
[    2.294549] coresight-funnel 6041000.funnel: FUNNEL initialized
[    2.299636] coresight-funnel 6100000.funnel: FUNNEL initialized
[    2.305439] coresight-funnel 6120000.funnel: FUNNEL initialized
[    2.311269] coresight-funnel 6130000.funnel: FUNNEL initialized
[    2.317249] coresight-funnel 61a1000.funnel: FUNNEL initialized
[    2.323854] coresight-etm4x 619c000.etm: ETM 4.0 initialized
[    2.329499] coresight-etm4x 619d000.etm: ETM 4.0 initialized
[    2.335007] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
[    2.340772] coresight-stm 6002000.stm: STM initialized
[    2.349595] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
[    2.352952] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[    2.364723] NET: Registered protocol family 10
[    2.369037] NET: Registered protocol family 17
[    2.372393] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.376836] Bridge firewalling registered
[    2.389540] 8021q: 802.1Q VLAN Support v1.8
[    2.393652] Registering SWP/SWPB emulation handler
[    2.416498] ubi0: attaching mtd15
[    2.564929] random: nonblocking pool is initialized
[    2.615645] ubi0: scanning is finished
[    2.619845] ubi0: attached mtd15 (name "rootfs", size 62 MiB)
[    2.619870] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.624563] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.631369] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.638208] ubi0: good PEBs: 496, bad PEBs: 0, corrupted PEBs: 0
[    2.644972] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
[    2.651213] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 766247865
[    2.658257] ubi0: available PEBs: 20, total reserved PEBs: 476, PEBs reserved for bad PEB handling: 20
[    2.667225] ubi0: background thread "ubi_bgt0d" started, PID 90
[    2.775469] hctosys: unable to open rtc device (rtc0)
[    2.782249] ALSA device list:
[    2.782270]   No soundcards found.
[    2.786712] VFS: Mounted root (squashfs filesystem) readonly on device 31:20.
[    2.789142] Freeing unused kernel memory: 1024K (81900000 - 81a00000)
[    3.117932] init: Console is alive
[    3.118136] init: - watchdog -
[    3.873969] usbcore: registered new interface driver usbfs
[    3.874063] usbcore: registered new interface driver hub
[    3.878534] usbcore: registered new device driver usb
[    3.885826] Button Hotplug driver version 0.4.1
[    3.892977] remoteproc remoteproc3: bt_rproc_driver is available
[    3.893159] bt_rproc_driver bt_rproc_driver: Probed
[    4.125166] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Before mount_root
[    6.422370] UBIFS (ubi0:4): default file-system created
[    6.422858] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 124
[    6.447356] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "rootfs_data"
[    6.447383] UBIFS (ubi0:4): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.454161] UBIFS (ubi0:4): FS size: 31997952 bytes (30 MiB, 252 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
[    6.464145] UBIFS (ubi0:4): reserved for root: 1511341 bytes (1475 KiB)
[    6.474322] UBIFS (ubi0:4): media format: w4/r0 (latest is w4/r0), UUID 8C38F51D-9372-4B55-8E20-D025F7446D6D, small LPT model
[    6.482500] mount_root: overlay filesystem has not been fully initialized yet
[    6.492542] mount_root: switching to jffs2 overlay
After mount_root
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.589575 seconds, 217.1KB/s
ln: /lib/firmware/IPQ5018/caldata.bin: No such file or directory
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.563794 seconds, 227.0KB/s
ln: /lib/firmware/qcn9100/caldata_1.bin: No such file or directory
ln: /lib/firmware/qcn6122/caldata_1.bin: No such file or directory
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.551341 seconds, 232.2KB/s
ln: /lib/firmware/qcn9100/caldata_2.bin: No such file or directory
ln: /lib/firmware/qcn6122/caldata_2.bin: No such file or directory
[    8.317395] procd: - early -
[    8.317502] procd: - watchdog -
[    8.975239] procd: - ubus -
[    9.987939] procd: - init -
Please press Enter to activate this console.
[   10.503635] ubi: mtd15 is already attached to ubi0BT FW mount is successful

[   10.668510] ubi: mtd15 is already attached to ubi0 WIFI FW mount is successful
ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 2
[   13.100500] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[   13.105561] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus
[   13.111599] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x39c00000
[   13.118815] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x200000
[   13.125932] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xf
[   13.132864] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[   13.138169] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[   13.144774] ssdk_dt_parse_port_bmp[757]:INFO:port_bmp doesn't exist!
[   13.151135] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist!
[   13.157451] ssdk_dt_parse_led[943]:INFO:current dts led_source_num is 1
[   13.163090] ssdk_plat_init start
[   15.574975] ssdk_mp_reset_init[739]:INFO:MP reset successfully!
[   15.575037] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully!
[   15.580848] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded!
[   15.587393] regi_init[3598]:INFO:Initializing SCOMPHY!
[   16.718992] _adpt_mp_uniphy_clk_output_ctrl_set[236]:INFO:uniphy will output clock as 25000000Hz
[   16.719103] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:0
[   16.726965] ssdk_switch_register[1710]:INFO:Chip version 0xee
[   16.734958] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
[   16.740550] ssdk_switch_register[1744]:INFO:polling is selected
[   16.748717] regi_init[3608]:INFO:Initializing SCOMPHY Done!!
[   16.754384] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[   16.760272] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: mdio
[   16.766254] ssdk_dt_parse_mac_mode[292]:INFO:mac mode doesn't exit!
[   16.773100] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[   16.779099] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[   16.785726] ssdk_dt_parse[1061]:INFO:switch node is qca83xx!
[   16.792023] ssdk_plat_init start
[   16.861701] f1_phy_api_ops_init[1517]:INFO:qca probe f1 phy driver succeeded!
[   16.861722] regi_init[3556]:INFO:Initializing ISISC!!
[   16.867846] /soc/ess-instance/ess-switch1@1: could not get #gpio-cells for /soc/pinctrl@1000000/audio_pinmux
[   17.074964] qca_ar8327_gpio_reset[3489]:INFO:GPIO39 reset switch done
[   17.075144] ssdk_switch_register[1718]:INFO:Chip version 0x1302
[   17.080400] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
[   17.086120] ssdk_switch_register[1744]:INFO:polling is selected
[   18.734959] regi_init[3561]:INFO:Initializing ISISC Done!!
[   18.735071] regi_init[3631]:INFO:qca-ssdk module init succeeded!
[   18.746703] **********************************************************
[   18.746737] * NSS Data Plane driver
[   18.752122] **********************************************************
[   18.787179] qca-nss 7a00000.nss: Direct firmware load for qca-nss0.bin failed with error -2
[   18.787208] qca-nss 7a00000.nss: Falling back to user helper
/lib/firmware/qca-nss0.bin 33
[   19.387138] nss_driver - fw of size 759276  bytes copied to load addr: 40000000, nss_id : 0
[   19.389086] Supported Frequencies -
[   19.394285] 850 MHz 1 GHz
[   19.399935]
[   19.400892] 7f10fc40: set sdma 8e8e6000
[   19.402667] node size 2 # items 4
[   19.407190] memory: 40000000 268435456 (avl 199741440) items 4 active_cores 1
[   19.409317] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000
[   19.416485] 7f10fc40: NSS core 0 DDR from 40000000 to 40800000
[   19.423286] 7f10fc40: meminfo init succeed
[   19.451941] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.459847] node size 2 # items 4
[   19.459872] memory: 40000000 268435456 (avl 199741440) items 4 active_cores 1
[   19.462138] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000
[   19.469295] 7f10fc40: nss core 0 booted successfully
[   19.482827] nf_conntrack version 0.5.0 (2866 buckets, 11464 max)
[   19.489991] QCA Hy-Fi multicast installation successfully
[   19.492595] PPP generic driver version 2.4.2
[   19.495494] NET: Registered protocol family 24
[   19.502344] QCA multicast snooping installed successfully
[   19.515895] cannot find nss-macsec0 node
[   19.515982] cannot find nss-macsec1 node
[   19.518982] cannot find nss-macsec2 node
[   19.522821] nss_macsec init success
[   19.529257] arp_tables: (C) 2002 David S. Miller
[   19.532614] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.630146] nf_conntrack_rtsp v0.6.21 loading
[   19.728787] nf_nat_rtsp v0.6.21 loading
[   19.761986] xt_time: kernel timezone is -0000
qcawifi configuration is disable
[   26.392495] configuring additional NSS pbufs
[   26.396324] additional pbufs of size 802816 got added to NSS
[   26.444309] mem_manager: module license 'Proprietary' taints kernel.
[   26.444336] Disabling lock debugging due to kernel taint
[   26.476846] qdf: unknown parameter 'mem_debug_disabled' ignored
[   30.677580] wlan: [975:I:RPTR] qca_multi_link_init_module:
[   30.677580] ******QCA Repeater Initialization Done***********
[   30.677580]
***** starting cnssdaemon  -i integrated -i integrated1 -i integrated2 *****
*****cnssdaemon pid=1043*********
[   32.023637] cnss[41]: INFO: Setting daemon_support=1 for instance_id 0x41
[   32.051149] cnss: ERR: Failed to get plat_priv for instance_id 0x42
[   32.075852] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2
******No cold_boot_support*****
[   33.158083] wlan: [1088:I:ANY] =======ol_if_register_wifi3_0==========
[   33.158083]
[   33.158121] wlan: [1088:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:7f7686e0
[   33.165068] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss
[   33.201793] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   34.960373] Subsystem error monitoring/handling services are up
[   34.960755] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up
[   34.961083] rpmsg_dev_probe: No pm domain
[   34.961421] rpmsg_dev_probe: No pm domain
[   34.977464] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   34.981093] remoteproc remoteproc1: powering up q6v5_wcss_userpd1
[   34.996991] q6v5_wcss_userpd1 wcss powered up successfully
[   34.998975] Subsystem error monitoring/handling services are up
[   35.001570] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[   35.001807] remoteproc remoteproc1: remote processor q6v5_wcss_userpd1 is now up
[   35.001869] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   35.001889] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 15 seconds
[   35.029792] cnss[2]: INFO: device_id : 65532 mem mode : [2]
[   35.037640] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[   35.047441] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2502826e, fw_build_timestamp: 2021-05-05 16:28, otp_version: s
[   35.051192] cnss[2]: INFO: Boardid from dts:24,FW:ff
[   35.080851] cnss[2]: INFO: BDF location : 0x4c400000
[   35.080877] cnss[2]: INFO: BDF IPQ5018/bdwlan.b24 size 131072
[   35.085956] cnss[2]: INFO: per device BDF location : 0x4c420000
[   35.090708] cnss[2]: INFO: CALDATA IPQ5018/caldata.bin size 131072 offset 0x20000
[   35.105024] cnss[2]: INFO: FW ready received for device 0xfffc
[   35.105427] wlan: [1088:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode
[   35.110052] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   35.121056] wlan: [1088:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4
[   35.124300] wlan: [1088:I:ANY] __ol_ath_attach: Allocated soc 89080500
[   35.133132] wlan: [1088:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   35.139742] wlan: [1088:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4
[   35.150912] wlan: [1088:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc
[   35.160187] wlan: [1088:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 7 Target Type 1d
[   35.170555] wlan: [1088:I:ANY] __ol_ath_attach: dev name soc0
[   35.179082] wlan: [1088:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 8efa7c00
[   35.188535] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.192261] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.202203] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.212185] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.222262] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.232305] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.242392] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   35.252460] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   35.262506] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   35.273873] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   35.282827] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.292745] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.302801] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   35.312858] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   35.322943] wlan: [1088:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   35.333040] wlan: [1088:I:ANY] htc_wmi_init: HT Create . 89207000
[   35.343080] wlan: [1088:I:ANY] htc_wmi_init: Skipping BMI Done
[   35.349289] wlan: [1088:I:ANY] htc_wmi_init: host_enable 0
[   35.363853] wlan: [1088:I:ANY] ol_target_init_complete: CDP soc attach success
[   35.363884] wlan: [1088:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[   35.371516] wlan: [1088:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 89207000, ep 2, value 1
[   35.379541] wlan: [81:I:TIF] HE_CAP Info = 9a08010d
[   35.387392] wlan: [81:I:TIF] Num HW modes = 1
[   35.392050] wlan: [81:I:TIF] Num PHY = 1
[   35.396583] wlan: [81:I:TIF] FW Build Version (Ext.) = 0
[   35.400534] wlan: [81:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   35.405852] wlan: [81:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   35.412567] wlan: [81:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   35.418655] wlan: [81:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   35.432742] wlan: [81:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   35.441241] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   35.448334] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   35.455432] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   35.462965] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   35.472090] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   35.477827] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   35.485378] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   35.493006] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   35.500242] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   35.507774] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   35.515407] wlan: [81:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   35.522608] wlan: [81:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   35.530170] wlan: [81:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:8efa7c00
[   35.539609] wlan: [81:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9
[   35.546454] wlan: [81:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   35.656263] wlan: [81:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[   35.695209] wlan: [81:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   35.695245] wlan: [81:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528
[   35.695245]
[   35.702549] wlan: [1088:I:ANY] ol_ath_connect_htc: WMI is ready
[   35.721214] wlan: [1088:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   35.721250] wlan: [1088:E:NSS] [nss-wifili]: pdev:87980500 radio_ifnum:28 scheme_id:1 radio_priority:0
[   35.732722] wlan: [1088:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   35.740620] wlan: [1088:I:ANY] ol_ath_soc_attach: connect HTC
[   35.746353] wlan: [1088:I:ANY] ol_ath_soc_attach: bypasswmi : 0
[   35.752161] wlan: [1088:I:MSCS] qca_mscs_module_init:
[   35.752161] ****QCA MSCS Initialization Done**** SoC 89080500
[   35.757517] wlan: [1088:I:ANY] ol_ath_soc_attach: UMAC attach
[   35.769990] wlan: [1088:I:ANY] __ol_ath_attach: pdev_netdev name wifi0
[   35.774230] wlan: [1088:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target
[   35.780688] wlan: [1088:I:ANY] __ol_ath_attach: BURSTING enabled by default
[   35.788084] wlan: [1088:I:ANY] ol_ath_pdev_attach: interface_id 0
[   35.794584] wlan: [1088:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   35.800823] wlan: [1088:I:TIF] ol_ath_pdev_regdmn_init:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[   35.808484] wlan: [1088:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[   35.818030] wlan: [1088:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update
[   35.832166] wlan: [1088:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update
[   35.840932] wlan: [1088:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case
[   35.850086] wlan: [1088:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:38:38 soc: soc0 pdev: wifi0
[   35.857334] wlan: [1088:I:MBSSIE] ieee80211_mbss_attach: :>
[   35.870110] wlan: [1088:I:MBSSIE] ieee80211_mbss_attach: :<
[   35.874311] wlan: [1088:I:ANY] ol_resmgr_create: OL Resmgr Init-ed
[   35.880196] wlan: [1088:I:ANY] acfg_attach: acfg_attach: 3323: Netlink socket created:8917d000
[   35.886178] wlan: [1088:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1
[   35.895264] wlan: [1088:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   35.901853] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:7f5b5e9c
[   35.908441] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(8917c408) Enabling DBDC Repeater 0  soc_lag 8915f180
[   35.915712] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   35.925425] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(8917c408) is_primary 0
[   35.933649] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled
[   35.941340] wlan: [1088:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   35.948779] wlan: [1088:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 4096
[   35.958032] wlan: [1088:I:ANY] __ol_ath_attach: needed_headroom reservation 44
[   35.968351] wlan: [1088:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41
[   35.974263] wlan: [1088:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11
[   35.984641] wlan: [1088:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x87980500, wdev: 0x87997c40, wiphy: 0x87077960, netdev: 0x87980000
[   35.992677] wlan: [1088:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   36.005062] wlan: [1088:E:QLD] qld_register: Handle or address is NULL
[   36.013213] wlan: [1088:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = 87980500_radio_type = 2
[   36.019896] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   36.029709] remoteproc remoteproc2: powering up q6v5_wcss_userpd2
[   36.040711] Subsystem error monitoring/handling services are up
[   36.043607] remoteproc remoteproc2: remote processor q6v5_wcss_userpd2 is now up
[   36.049667] wlan: [1088:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   36.057053] cnss[41]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 15 seconds
[   52.774982] cnss[41]: ERR: FW ready timed-out 15 seconds
[   52.775006] qmi_history_index [27]
[   52.779376] qmi_history[0]:timestamp[35023] instance_id [0x2] msg_id[0x20] err[0] resp_err[0]
[   52.782587] qmi_history[1]:timestamp[35024] instance_id [0x2] msg_id[0x20] err[0] resp_err[0]
[   52.791232] qmi_history[2]:timestamp[35037] instance_id [0x2] msg_id[0x34] err[0] resp_err[0]
[   52.799738] qmi_history[3]:timestamp[35038] instance_id [0x2] msg_id[0x34] err[0] resp_err[0]
[   52.808226] qmi_history[4]:timestamp[35040] instance_id [0x2] msg_id[0xD020] err[0] resp_err[0]
[   52.816901] qmi_history[5]:timestamp[35041] instance_id [0x2] msg_id[0x35] err[0] resp_err[0]
[   52.825248] qmi_history[6]:timestamp[35041] instance_id [0x2] msg_id[0x36] err[0] resp_err[0]
[   52.833913] qmi_history[7]:timestamp[35041] instance_id [0x2] msg_id[0xD020] err[0] resp_err[0]
[   52.842431] qmi_history[8]:timestamp[35042] instance_id [0x2] msg_id[0x36] err[0] resp_err[0]
[   52.850929] qmi_history[9]:timestamp[35042] instance_id [0x2] msg_id[0xD037] err[0] resp_err[0]
[   52.859618] qmi_history[10]:timestamp[35042] instance_id [0x2] msg_id[0x37] err[0] resp_err[0]
[   52.869384] qmi_history[11]:timestamp[35042] instance_id [0x2] msg_id[0xD024] err[0] resp_err[0]
[   52.876802] qmi_history[12]:timestamp[35042] instance_id [0x2] msg_id[0x24] err[0] resp_err[0]
[   52.885752] qmi_history[13]:timestamp[35042] instance_id [0x2] msg_id[0x24] err[0] resp_err[0]
[   52.894163] qmi_history[14]:timestamp[35042] instance_id [0x2] msg_id[0xD024] err[0] resp_err[0]
[   52.902761] qmi_history[15]:timestamp[35042] instance_id [0x2] msg_id[0xD026] err[0] resp_err[0]
[   52.911869] qmi_history[16]:timestamp[35046] instance_id [0x2] msg_id[0x25] err[0] resp_err[0]
[   52.920486] qmi_history[17]:timestamp[35046] instance_id [0x2] msg_id[0xD026] err[0] resp_err[0]
[   52.928876] qmi_history[18]:timestamp[35080] instance_id [0x2] msg_id[0x25] err[0] resp_err[0]
[   52.937828] qmi_history[19]:timestamp[35080] instance_id [0x2] msg_id[0x25] err[0] resp_err[0]
[   52.946254] qmi_history[20]:timestamp[35091] instance_id [0x2] msg_id[0x25] err[0] resp_err[0]
[   52.954817] qmi_history[21]:timestamp[35091] instance_id [0x2] msg_id[0x3C] err[0] resp_err[0]
[   52.963445] qmi_history[22]:timestamp[35091] instance_id [0x2] msg_id[0x3C] err[0] resp_err[0]
[   52.973287] qmi_history[23]:timestamp[35091] instance_id [0x2] msg_id[0x38] err[0] resp_err[0]
[   52.980620] qmi_history[24]:timestamp[35104] instance_id [0x2] msg_id[0x23] err[0] resp_err[0]
[   52.989217] qmi_history[25]:timestamp[35105] instance_id [0x2] msg_id[0x23] err[0] resp_err[0]
[   52.997834] qmi_history[26]:timestamp[35112] instance_id [0x2] msg_id[0x22] err[0] resp_err[0]
[   53.006569] qmi_history[27]:timestamp[35115] instance_id [0x2] msg_id[0x22] err[0] resp_err[0]
[   53.015010] cnss[41]: ERR: ASSERT at line 718
[   53.023613] ------------[ cut here ]------------
[   53.027960] Kernel BUG at 815f5044 [verbose debug info unavailable]
[   53.032649] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[   53.038637] Modules linked in: wifi_3_0(+) qca_ol umac asf(P) qdf mem_manager(P) iptable_nat nf_nat_pptp nf_nat_ipv4 nf_nat_amanda nf_conntrack_pptp nf_conntrack_ipv6 nf_conntrack_ipv4 nf_cn
[   53.179000] CPU: 0 PID: 1088 Comm: insmod Tainted: P                4.4.60 #297
[   53.179264] Hardware name: Generic DT based system
[   53.186381] task: 8ef72400 ti: 88d68000 task.ti: 88d68000
[   53.191244] pc : [<815f5044>]    lr : [<815f5044>]    psr: 60000013
[   53.191244] sp : 88d69c30  ip : 00000000  fp : 8f94c810
[   53.196717] r10: 8efa98a8  r9 : 0000000a  r8 : 81a2ef9c
[   53.207995] r7 : 81a2efb4  r6 : 00000097  r5 : 8f2a0010  r4 : 8f2a2010
[   53.213204] r3 : 00000004  r2 : 00000000  r1 : 60000013  r0 : 00000021
[   53.219803] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   53.226313] Control: 10c0383d  Table: 4922c06a  DAC: 00000055
[   53.233516] Process insmod (pid: 1088, stack limit = 0x88d68210)
[   53.239247] Stack: (0x88d69c30 to 0x88d6a000)
[   53.245323] 9c20:                                     00000000 8185950c 7f68ee4c 8f94c800
[   53.249583] 9c40: 00000001 7f68ee5c 8efa98a8 7f648a84 00000001 7f68ee5c 8efa98a8 81644c80
[   53.257742] 9c60: 81a83104 7f690208 a0000013 8fda4214 00000001 81644ce4 8f94c810 00000000
[   53.265901] 9c80: 7f68ee4c 8f94c800 00000001 00000000 00000003 7f68ee4c 8f94c800 00000001
[   53.274062] 9ca0: 7f68ee5c 8efa98a8 817c17a0 7f64952c 7f68ee5c 00000003 00000001 8efa98a8
[   53.282222] 9cc0: 8185950c 7f3366ac 2e180f3f 00000008 89df4e80 7f6062bc 8f94c800 8f94c810
[   53.290380] 9ce0: 8185950c 8f2a02a8 00000000 7f6bf9a8 88d69d7c 00000000 815f528c 8efa98a8
[   53.298540] 9d00: 817c17a0 815f52b0 ffffffff 00000000 00000003 88d69d7c 00000000 81335d9c
[   53.306700] 9d20: 8f2c724c 8f2c7234 00000000 00000003 88d69d7c ffffffff 8efa98a8 81336184
[   53.314859] 9d40: 00000000 00000003 88d69d7c 00000001 88d69db0 00000003 81a7bfe0 81a7bffc
[   53.323020] 9d60: 8f2a5010 813361b4 00000000 00000003 88d69d7c 81566534 8f2cbb90 00000000
[   53.331179] 9d80: 00000000 00000000 8f28d000 8f297600 8f28d000 8f28d0ec 88d69dac 00000000
[   53.339339] 9da0: 00000000 81567234 8a3f3124 8f28d000 8f2a0010 00000001 7f6bf9a8 81a7d204
[   53.347499] 9dc0: 81a7d22c 815f8944 89df4e80 7f76892c 00000000 7f7687cc 00000000 7f768808
[   53.355658] 9de0: 8efa98a8 7f60641c 7f76a000 7f76892c 00000000 7f741c4c 00000001 7f7686e0
[   53.363818] 9e00: 7f76a000 7f76a044 00000000 816f5848 ff0a0004 8130be2c 00000000 8f905000
[   53.371978] 9e20: 8fef71ec 813950ac 00000000 81a05a10 8fd82b0c 8fd82b00 8fd82b00 00000000
[   53.380137] 9e40: 8fef6d00 00000001 8fef6d10 8fdb9000 8fef6d00 00000000 00040000 00000000
[   53.388297] 9e60: 81a701f4 7f7687c0 7f76892c 7f7687c0 7f76892c 89252100 7f7687cc 00000000
[   53.396458] 9e80: 7f768808 8137ad50 7f7687c0 60000013 88d69f48 7f76892c 7f7687c0 8137bff8
[   53.404617] 9ea0: 7f7687cc 00007fff 7f7687c0 81379fc0 90803000 81a02434 81303ca0 20000013
[   53.412777] 9ec0: 95495084 817c177c 7f768934 76f3a4f0 954c3d60 76ef9d84 00009220 00065d2b
[   53.420936] 9ee0: 0005c968 7f742fc0 0000000a 00000000 00000000 00000000 00000000 00000000
[   53.429095] 9f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   53.437256] 9f20: 00000000 000038fc 76f0690c 00000000 954d08fc 76f3a4f0 88d68000 00000000
[   53.445415] 9f40: 00000000 8137c258 953fd000 000d38fc 95494abc 9549493d 954a4794 00000000
[   53.453574] 9f60: 00000000 00000000 00000000 00000000 00000025 00000026 0000001b 00000000
[   53.461734] 9f80: 00000017 00000000 000d38fc 00000000 00000000 00000003 00000080 81301d24
[   53.469895] 9fa0: 88d68000 81301b80 00000000 00000000 76e33010 000d38fc 76f3a4f0 00001f14
[   53.478053] 9fc0: 00000000 00000000 00000003 00000080 000d38fc 00000000 54b42f20 00000000
[   53.486214] 9fe0: 7edf8d14 7edf8cf8 54b31d5c 76f73674 60000010 76e33010 0000012a 00004c58
[   53.494376] Function entered at [<815f5044>] from [<7f648a84>]
[   53.502613] Function entered at [<7f648a84>] from [<7f64952c>]
[   53.508257] Function entered at [<7f64952c>] from [<815f52b0>]
[   53.514071] Function entered at [<815f52b0>] from [<81335d9c>]
[   53.519890] Function entered at [<81335d9c>] from [<81336184>]
[   53.525704] Function entered at [<81336184>] from [<813361b4>]
[   53.531519] Function entered at [<813361b4>] from [<81566534>]
[   53.537336] Function entered at [<81566534>] from [<81567234>]
[   53.543151] Function entered at [<81567234>] from [<815f8944>]
[   53.548967] Function entered at [<815f8944>] from [<7f60641c>]
[   53.554784] Function entered at [<7f60641c>] from [<7f741c4c>]
[   53.560629] Function entered at [<7f741c4c>] from [<7f76a044>]
[   53.566430] Function entered at [<7f76a044>] from [<8130be2c>]
[   53.572232] Function entered at [<8130be2c>] from [<8137ad50>]
[   53.578049] Function entered at [<8137ad50>] from [<8137bff8>]
[   53.583864] Function entered at [<8137bff8>] from [<8137c258>]
[   53.589679] Function entered at [<8137c258>] from [<81301b80>]
[   53.595499] Code: e30022ce e59411d4 e59f0040 ebf5809a (e7f001f2)
[   53.601314] ---[ end trace c2f9a58808160442 ]---
[   53.607475] Kernel panic - not syncing: Fatal exception
[   53.612168] CPU1: stopping
[   53.617112] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P      D         4.4.60 #297
[   53.619888] Hardware name: Generic DT based system
[   53.627096] Function entered at [<813168dc>] from [<81313498>]
[   53.631954] Function entered at [<81313498>] from [<814ec698>]
[   53.637770] Function entered at [<814ec698>] from [<81315ca8>]
[   53.643585] Function entered at [<81315ca8>] from [<813013a0>]
[   53.649401] Function entered at [<813013a0>] from [<813024c0>]
[   53.655218] Exception stack(0x8f871f98 to 0x8f871fe0)
[   53.661034] 1f80:                                                       00000001 00000000
[   53.666162] 1fa0: 00000000 81303360 00000000 8f870000 00000000 819322cc 8f871ff0 51af8014
[   53.674321] 1fc0: 00000000 00000000 00000000 8f871fe8 81310fd8 81310fdc 60000013 ffffffff
[   53.682479] Function entered at [<813024c0>] from [<81310fdc>]
[   53.690634] Function entered at [<81310fdc>] from [<813502fc>]
[   53.696365] Function entered at [<813502fc>] from [<4130144c>]
[   58.702399] bt_driver 1943008.bt: IPQ crashed, inform BT to prepare dump
[   58.702419] bt_driver 1943008.bt: BT IPC not initialized, no message sent
[   59.308192] Rebooting in 5 seconds..