Skip to content

Instantly share code, notes, and snippets.

View ptpt52's full-sized avatar
The only way out is through.

PTPT52 ptpt52

The only way out is through.
View GitHub Profile
U-Boot 1.1.4-dirty (Oct 12 2017 - 17:31:36)(COMPRESSED)
ap151 - Dragonfly 1.0
DRAM: 64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 212k for U-Boot at: 83fc8000
Reserving 132k for malloc() at: 83fa7000
Reserving 44 Bytes for Board Info at: 83fa6fd4
Reserving 36 Bytes for Global Data at: 83fa6fb0
@ptpt52
ptpt52 / config.ramips-mt7620nand-nosymbol
Created January 4, 2018 18:23
config for mir3 build
#
# Automatically generated file; DO NOT EDIT.
# OpenWrt Configuration
#
CONFIG_MODULES=y
CONFIG_HAVE_DOT_CONFIG=y
CONFIG_DEFAULT_TARGET_ramips_mt7620nand=y
# CONFIG_TARGET_sunxi is not set
# CONFIG_TARGET_apm821xx is not set
# CONFIG_TARGET_ath25 is not set
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 48be188..7fa135d 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -62,6 +62,12 @@
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points-v2 = <&cpu0_opp_table>;
+
+ L2: l2-cache {
[ 673.265551] ath10k_pci 0000:01:00.0: failed to send pdev bss chan info request
[ 682.385879] ath10k_pci 0000:01:00.0: failed to set beacon mode for vdev 0: -11
[ 685.425953] ath10k_pci 0000:01:00.0: failed to set dtim period for vdev 0: -11
[ 694.546065] ath10k_pci 0000:01:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[ 697.586100] ath10k_pci 0000:01:00.0: failed to set cts protection for vdev 0: -11
[ 700.626161] ath10k_pci 0000:01:00.0: failed to set preamble for vdev 0: -11
Press Meta-Z for help on special keys
?????????~???<27 8 (1~53)27
1 (1~54)27 9 (1~55)28
2 (1~53)27 10 (1~57)29
3 (2~58)30 11 (1~55)28
4 (1~55)28 12 (1~56)28
5 (1~57)29 13 (1~56)28
6 (1~52)26 14 (1~57)29
7 (2~57)29ࣅ??5
Loading: checksum bad
checksum bad
Got ARP REPLY, set server/gtwy eth addr (00:e0:4c:68:00:7a)
Got it
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
TIMEOUT_COUNT=10,Load address: 0x80a00000
Loading: checksum bad
Got ARP REPLY, set server/gtwy eth addr (00:e0:4c:68:00:7a)
Got it
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
## Booting image at 80a00000 ...
Image Name: MIPS OpenWrt Linux-5.4.24
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 7676357 Bytes = 7.3 MB
Load Address: 80001000
Entry Point: 80001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80001000) ...
Starting kernel ...
[ 0.000000] Linux version 5.4.24 (LGA1150@Haswell) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r12425-d83150e3fb)) #0 SMP Mon Mar 9 17:20:43 2020
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is UBNT-ERX-SFP
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
===================================================================
MT7621 stage1 code done
CPU=50000000 HZ BUS=16666666 HZ
===================================================================
U-Boot 1.1.3 (UBNT Build Version: e51_001_1e49c) (Jul 27 2018 - 04:44:57)
Board: Ralink APSoC DRAM: 256 MB
relocate_code Pointer at: 8ffac000