pwicherski/gist:4ca90188b8d65c2eb99bcc47f7cc1317

## gistfile1.txt
PlayStore: Does the device supports Google Play?
PlayStore.enabled [no]:

avd home that was used during the construction of this hardware.ini: This can be used by post processing tools to migrate snapshots
android.avd.home []:

sdk root that was used during the construction of this hardware.ini: This can be used by post processing tools to migrate snapshots
android.sdk.root []:

ID of the AVD being run:
avd.id [<build>]:

Name of the AVD being run:
avd.name [<build>]:

Cache partition support: Whether we use a /cache partition on the device.
disk.cachePartition [yes]:

Cache partition: Cache partition to use on the device. Ignored if disk.cachePartition is not 'yes'.
disk.cachePartition.path []:

Cache partition size:
disk.cachePartition.size [66MB]:

Initial data partition: If not empty, its content will be copied to the disk.dataPartition.path file at boot-time.
disk.dataPartition.initPath []:

Path to data partition file: Path to data partition file. Cannot be empty. Special value <temp> means using a temporary file. If disk.dataPartition.initPath is not empty, its content will be copied to the disk.dataPartition.path file at boot-time.
disk.dataPartition.path [<temp>]:

Ideal size of data partition:
disk.dataPartition.size [0]:

Path to encryption key partition file: Path to encryption key partition file. Should be at least 16K bytes empty disk without any filesystem on it.
disk.encryptionKeyPartition.path []:

Path to the ramdisk image: Path to the ramdisk image.
disk.ramdisk.path []:

Path to snapshot storage: Path to a 'snapshot storage' file, where all snapshots are stored.
disk.snapStorage.path []:

Initial system partition image:
disk.systemPartition.initPath []:

Path to runtime system partition image:
disk.systemPartition.path []:

Ideal size of system partition:
disk.systemPartition.size [0]:

Initial vendor partition image:
disk.vendorPartition.initPath []:

Path to runtime vendor partition image:
disk.vendorPartition.path []:

Ideal size of vendor partition:
disk.vendorPartition.size [0]:

Always use cold boot: If set, AVD will always use the full cold boot instead of snapshot-based quick boot process
fastboot.forceColdBoot [no]:

Accelerometer: Whether there is an accelerometer in the device.
hw.accelerometer [yes]:

Chrome OS device (App Runtime for Chrome): The emulated device is a Chrome OS machine.
hw.arc [no]:

Auto login for Chrome OS devices: Used to enable auto login into Chrome OS devices
hw.arc.autologin [no]:

Audio recording support: Whether the device can record audio
hw.audioInput [yes]:

Audio playback support: Whether the device can play audio
hw.audioOutput [yes]:

Battery support: Whether the device can run on a battery.
hw.battery [yes]:

Configures camera facing back: Must be 'emulated' for a fake camera, 'webcam<N>' for a web camera, or 'none' if back camera is disabled.
hw.camera.back [emulated]:

Configures camera facing front: Must be 'emulated' for a fake camera, 'webcam<N>' for a web camera, or 'none' if front camera is disabled.
hw.camera.front [none]:

CPU Architecture: The CPU Architecture to emulator
hw.cpu.arch [arm]:

CPU model: The CPU model (QEMU-specific string)
hw.cpu.model []:

SMP CPU core count: Number of cores in a simulated SMP CPU.
hw.cpu.ncore [2]:

DPad support: Whether the device has DPad keys
hw.dPad [yes]:

Screen density of the second display:
hw.display1.density [0]:

the flag to use when the second display is initialized in the Android system.:
hw.display1.flag [0]:

Pixel height of the second display:
hw.display1.height [0]:

Pixel width of the second display:
hw.display1.width [0]:

the horizontal offset of the second display with respect to the host QT window.:
hw.display1.xOffset [-1]:

the veritcal offset of the second display with respect to the host QT window.:
hw.display1.yOffset [-1]:

Screen density of the third display:
hw.display2.density [0]:

the flag to use when the third display is initialized in the Android system.:
hw.display2.flag [0]:

Pixel height of the third display:
hw.display2.height [0]:

Pixel width of the third display:
hw.display2.width [0]:

the horizontal offset of the third display with respect to the host QT window.:
hw.display2.xOffset [-1]:

the veritcal offset of the third display with respect to the host QT window.:
hw.display2.yOffset [-1]:

Screen density of the fourth display:
hw.display3.density [0]:

the flag touse when the fourth display is initialized in the Android system.:
hw.display3.flag [0]:

Pixel height of the fourth display:
hw.display3.height [0]:

Pixel width of the fourth display:
hw.display3.width [0]:

the horizontal offset of the fourth display with respect to the host QT window.:
hw.display3.xOffset [-1]:

the veritcal offset of the fourth display with respect to the host QT window.:
hw.display3.yOffset [-1]:

Vertical size of the sub-region:
hw.displayRegion.0.1.height [0]:

Horizontal size of the sub-region:
hw.displayRegion.0.1.width [0]:

Horizontal offset of the sub-region:
hw.displayRegion.0.1.xOffset [-1]:

Vertical offset of the sub-region:
hw.displayRegion.0.1.yOffset [-1]:

Feature flags: A comma-separated list of feature flags to enable or disable, such as 'Enabled,-Disabled'.
hw.featureflags []:

Adjust display window to folded size:
hw.fold.adjust [no]:

Transport used to run graphics:
hw.gltransport [pipe]:

For address space graphics, the size of the ring used to transfer larger buffers.:
hw.gltransport.asg.dataRingSize [32768]:

For address space graphics, the total size of the write buffer the guest can write into:
hw.gltransport.asg.writeBufferSize [1048576]:

For address space graphics, the max size of each guest-to-host transaction.:
hw.gltransport.asg.writeStepSize [4096]:

Interval over which to flush draw calls (balance host gpu starve vs pipe notif overhead):
hw.gltransport.drawFlushInterval [800]:

GPS support: Whether there is a GPS in the device.
hw.gps [yes]:

GPU emulation: Enable/Disable emulated OpenGLES GPU
hw.gpu.enabled [no]:

GPU emulation mode: This value determines how GPU emulation is implemented.
hw.gpu.mode [auto]:

GSM modem support: Whether there is a GSM modem in the device.
hw.gsmModem [yes]:

Gyroscope: Whether there is a gyroscope in the device.
hw.gyroscope [yes]:

Initial screen orientation: Setup initial screen orientation, can be rotated later on.
hw.initialOrientation [portrait]:

Keyboard support: Whether the device has a QWERTY keyboard.
hw.keyboard [no]:

Keyboard charmap name: Name of the system keyboard charmap file.
hw.keyboard.charmap [qwerty2]:

Keyboard lid support: Whether the QWERTY keyboard can be opened/closed.
hw.keyboard.lid [yes]:

LCD backlight: Enable/Disable LCD backlight simulation,yes-enabled,no-disabled.
hw.lcd.backlight [yes]:

Abstracted LCD density: A value used to roughly describe the density of the LCD screen for automatic resource/asset selection.
hw.lcd.density [160]:

LCD color depth: Color bit depth of emulated framebuffer.
hw.lcd.depth [16]:

LCD pixel height:
hw.lcd.height [640]:

LCD VSYNC rate:
hw.lcd.vsync [60]:

LCD pixel width:
hw.lcd.width [320]:

Logcat Output File Path:
hw.logcatOutput.path []:

Hardware Back/Home keys: Whether there are hardware back/home keys on the device.
hw.mainKeys [yes]:

Device ram size: The amount of physical RAM on the device, in megabytes.
hw.ramSize [0]:

Rotary input support: Whether the device has rotary input
hw.rotaryInput [no]:

Touch screen type: Defines type of the screen.
hw.screen [multi-touch]:

SD Card support: Whether the device supports insertion/removal of virtual SD Cards.
hw.sdCard [yes]:

SD Card image path:
hw.sdCard.path []:

Uncalibrated gyroscope support: Provides uncalibrated gyroscope sensor values.
hw.sensors.gyroscope_uncalibrated [yes]:

Humidity support: Whether there is a relative humidity sensor in the device
hw.sensors.humidity [yes]:

Light support: Whether there is a light sensor in the device
hw.sensors.light [yes]:

Magnetic field support: Provides magnetic field sensor values.
hw.sensors.magnetic_field [yes]:

Uncalibrated magnetic field suport: Provides uncalibrated magnetic field sensor values.
hw.sensors.magnetic_field_uncalibrated [yes]:

Orientation support: Provides orientation sensor values.
hw.sensors.orientation [yes]:

Pressure support: Whether there is a pressure sensor in the device
hw.sensors.pressure [yes]:

Proximity support: Whether there is an proximity in the device.
hw.sensors.proximity [yes]:

Temperature support: Provides temperature sensor values.
hw.sensors.temperature [yes]:

Track-ball support: Whether there is a trackball on the device.
hw.trackBall [yes]:

Deprecated option. Ignored.: Used to specify the Ext4 partition image type. This is now autodetected.
hw.useext4 [yes]:

Does the kernel require a new device naming scheme?: Used to specify whether the kernel requires a new device naming scheme. Typically for Linux 3.10 and above.
kernel.newDeviceNaming [autodetect]:

kernel boot parameters string.:
kernel.parameters []:

Path to the kernel image: Path to the kernel image.
kernel.path []:

Does the kernel supports YAFFS2 partitions?: Used to specify whether the kernel supports YAFFS2 partition images. Typically before 3.10 only.
kernel.supportsYaffs2 [autodetect]:

Delay sending data to guest adb until guest completed booting:
test.delayAdbTillBootComplete [0]:

Monitor Adb messages between guest and host. Default: Disabled.:
test.monitorAdb [0]:

Quit emulator after guest boots completely, or after time out. Default: end of universe.:
test.quitAfterBootTimeOut [-1]:

Max VM application heap size: The maximum heap size a Dalvik application might allocate before being killed by the system. Value is in megabytes.
vm.heapSize [0]:
	PlayStore: Does the device supports Google Play?
	PlayStore.enabled [no]:

	avd home that was used during the construction of this hardware.ini: This can be used by post processing tools to migrate snapshots
	android.avd.home []:

	sdk root that was used during the construction of this hardware.ini: This can be used by post processing tools to migrate snapshots
	android.sdk.root []:

	ID of the AVD being run:
	avd.id [<build>]:

	Name of the AVD being run:
	avd.name [<build>]:

	Cache partition support: Whether we use a /cache partition on the device.
	disk.cachePartition [yes]:

	Cache partition: Cache partition to use on the device. Ignored if disk.cachePartition is not 'yes'.
	disk.cachePartition.path []:

	Cache partition size:
	disk.cachePartition.size [66MB]:

	Initial data partition: If not empty, its content will be copied to the disk.dataPartition.path file at boot-time.
	disk.dataPartition.initPath []:

	Path to data partition file: Path to data partition file. Cannot be empty. Special value <temp> means using a temporary file. If disk.dataPartition.initPath is not empty, its content will be copied to the disk.dataPartition.path file at boot-time.
	disk.dataPartition.path [<temp>]:

	Ideal size of data partition:
	disk.dataPartition.size [0]:

	Path to encryption key partition file: Path to encryption key partition file. Should be at least 16K bytes empty disk without any filesystem on it.
	disk.encryptionKeyPartition.path []:

	Path to the ramdisk image: Path to the ramdisk image.
	disk.ramdisk.path []:

	Path to snapshot storage: Path to a 'snapshot storage' file, where all snapshots are stored.
	disk.snapStorage.path []:

	Initial system partition image:
	disk.systemPartition.initPath []:

	Path to runtime system partition image:
	disk.systemPartition.path []:

	Ideal size of system partition:
	disk.systemPartition.size [0]:

	Initial vendor partition image:
	disk.vendorPartition.initPath []:

	Path to runtime vendor partition image:
	disk.vendorPartition.path []:

	Ideal size of vendor partition:
	disk.vendorPartition.size [0]:

	Always use cold boot: If set, AVD will always use the full cold boot instead of snapshot-based quick boot process
	fastboot.forceColdBoot [no]:

	Accelerometer: Whether there is an accelerometer in the device.
	hw.accelerometer [yes]:

	Chrome OS device (App Runtime for Chrome): The emulated device is a Chrome OS machine.
	hw.arc [no]:

	Auto login for Chrome OS devices: Used to enable auto login into Chrome OS devices
	hw.arc.autologin [no]:

	Audio recording support: Whether the device can record audio
	hw.audioInput [yes]:

	Audio playback support: Whether the device can play audio
	hw.audioOutput [yes]:

	Battery support: Whether the device can run on a battery.
	hw.battery [yes]:

	Configures camera facing back: Must be 'emulated' for a fake camera, 'webcam<N>' for a web camera, or 'none' if back camera is disabled.
	hw.camera.back [emulated]:

	Configures camera facing front: Must be 'emulated' for a fake camera, 'webcam<N>' for a web camera, or 'none' if front camera is disabled.
	hw.camera.front [none]:

	CPU Architecture: The CPU Architecture to emulator
	hw.cpu.arch [arm]:

	CPU model: The CPU model (QEMU-specific string)
	hw.cpu.model []:

	SMP CPU core count: Number of cores in a simulated SMP CPU.
	hw.cpu.ncore [2]:

	DPad support: Whether the device has DPad keys
	hw.dPad [yes]:

	Screen density of the second display:
	hw.display1.density [0]:

	the flag to use when the second display is initialized in the Android system.:
	hw.display1.flag [0]:

	Pixel height of the second display:
	hw.display1.height [0]:

	Pixel width of the second display:
	hw.display1.width [0]:

	the horizontal offset of the second display with respect to the host QT window.:
	hw.display1.xOffset [-1]:

	the veritcal offset of the second display with respect to the host QT window.:
	hw.display1.yOffset [-1]:

	Screen density of the third display:
	hw.display2.density [0]:

	the flag to use when the third display is initialized in the Android system.:
	hw.display2.flag [0]:

	Pixel height of the third display:
	hw.display2.height [0]:

	Pixel width of the third display:
	hw.display2.width [0]:

	the horizontal offset of the third display with respect to the host QT window.:
	hw.display2.xOffset [-1]:

	the veritcal offset of the third display with respect to the host QT window.:
	hw.display2.yOffset [-1]:

	Screen density of the fourth display:
	hw.display3.density [0]:

	the flag touse when the fourth display is initialized in the Android system.:
	hw.display3.flag [0]:

	Pixel height of the fourth display:
	hw.display3.height [0]:

	Pixel width of the fourth display:
	hw.display3.width [0]:

	the horizontal offset of the fourth display with respect to the host QT window.:
	hw.display3.xOffset [-1]:

	the veritcal offset of the fourth display with respect to the host QT window.:
	hw.display3.yOffset [-1]:

	Vertical size of the sub-region:
	hw.displayRegion.0.1.height [0]:

	Horizontal size of the sub-region:
	hw.displayRegion.0.1.width [0]:

	Horizontal offset of the sub-region:
	hw.displayRegion.0.1.xOffset [-1]:

	Vertical offset of the sub-region:
	hw.displayRegion.0.1.yOffset [-1]:

	Feature flags: A comma-separated list of feature flags to enable or disable, such as 'Enabled,-Disabled'.
	hw.featureflags []:

	Adjust display window to folded size:
	hw.fold.adjust [no]:

	Transport used to run graphics:
	hw.gltransport [pipe]:

	For address space graphics, the size of the ring used to transfer larger buffers.:
	hw.gltransport.asg.dataRingSize [32768]:

	For address space graphics, the total size of the write buffer the guest can write into:
	hw.gltransport.asg.writeBufferSize [1048576]:

	For address space graphics, the max size of each guest-to-host transaction.:
	hw.gltransport.asg.writeStepSize [4096]:

	Interval over which to flush draw calls (balance host gpu starve vs pipe notif overhead):
	hw.gltransport.drawFlushInterval [800]:

	GPS support: Whether there is a GPS in the device.
	hw.gps [yes]:

	GPU emulation: Enable/Disable emulated OpenGLES GPU
	hw.gpu.enabled [no]:

	GPU emulation mode: This value determines how GPU emulation is implemented.
	hw.gpu.mode [auto]:

	GSM modem support: Whether there is a GSM modem in the device.
	hw.gsmModem [yes]:

	Gyroscope: Whether there is a gyroscope in the device.
	hw.gyroscope [yes]:

	Initial screen orientation: Setup initial screen orientation, can be rotated later on.
	hw.initialOrientation [portrait]:

	Keyboard support: Whether the device has a QWERTY keyboard.
	hw.keyboard [no]:

	Keyboard charmap name: Name of the system keyboard charmap file.
	hw.keyboard.charmap [qwerty2]:

	Keyboard lid support: Whether the QWERTY keyboard can be opened/closed.
	hw.keyboard.lid [yes]:

	LCD backlight: Enable/Disable LCD backlight simulation,yes-enabled,no-disabled.
	hw.lcd.backlight [yes]:

	Abstracted LCD density: A value used to roughly describe the density of the LCD screen for automatic resource/asset selection.
	hw.lcd.density [160]:

	LCD color depth: Color bit depth of emulated framebuffer.
	hw.lcd.depth [16]:

	LCD pixel height:
	hw.lcd.height [640]:

	LCD VSYNC rate:
	hw.lcd.vsync [60]:

	LCD pixel width:
	hw.lcd.width [320]:

	Logcat Output File Path:
	hw.logcatOutput.path []:

	Hardware Back/Home keys: Whether there are hardware back/home keys on the device.
	hw.mainKeys [yes]:

	Device ram size: The amount of physical RAM on the device, in megabytes.
	hw.ramSize [0]:

	Rotary input support: Whether the device has rotary input
	hw.rotaryInput [no]:

	Touch screen type: Defines type of the screen.
	hw.screen [multi-touch]:

	SD Card support: Whether the device supports insertion/removal of virtual SD Cards.
	hw.sdCard [yes]:

	SD Card image path:
	hw.sdCard.path []:

	Uncalibrated gyroscope support: Provides uncalibrated gyroscope sensor values.
	hw.sensors.gyroscope_uncalibrated [yes]:

	Humidity support: Whether there is a relative humidity sensor in the device
	hw.sensors.humidity [yes]:

	Light support: Whether there is a light sensor in the device
	hw.sensors.light [yes]:

	Magnetic field support: Provides magnetic field sensor values.
	hw.sensors.magnetic_field [yes]:

	Uncalibrated magnetic field suport: Provides uncalibrated magnetic field sensor values.
	hw.sensors.magnetic_field_uncalibrated [yes]:

	Orientation support: Provides orientation sensor values.
	hw.sensors.orientation [yes]:

	Pressure support: Whether there is a pressure sensor in the device
	hw.sensors.pressure [yes]:

	Proximity support: Whether there is an proximity in the device.
	hw.sensors.proximity [yes]:

	Temperature support: Provides temperature sensor values.
	hw.sensors.temperature [yes]:

	Track-ball support: Whether there is a trackball on the device.
	hw.trackBall [yes]:

	Deprecated option. Ignored.: Used to specify the Ext4 partition image type. This is now autodetected.
	hw.useext4 [yes]:

	Does the kernel require a new device naming scheme?: Used to specify whether the kernel requires a new device naming scheme. Typically for Linux 3.10 and above.
	kernel.newDeviceNaming [autodetect]:

	kernel boot parameters string.:
	kernel.parameters []:

	Path to the kernel image: Path to the kernel image.
	kernel.path []:

	Does the kernel supports YAFFS2 partitions?: Used to specify whether the kernel supports YAFFS2 partition images. Typically before 3.10 only.
	kernel.supportsYaffs2 [autodetect]:

	Delay sending data to guest adb until guest completed booting:
	test.delayAdbTillBootComplete [0]:

	Monitor Adb messages between guest and host. Default: Disabled.:
	test.monitorAdb [0]:

	Quit emulator after guest boots completely, or after time out. Default: end of universe.:
	test.quitAfterBootTimeOut [-1]:

	Max VM application heap size: The maximum heap size a Dalvik application might allocate before being killed by the system. Value is in megabytes.
	vm.heapSize [0]: