gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

joyrexus

Nice answer on stackoverflow to the question of when to use one or the other content-types for POSTing data, viz. application/x-www-form-urlencoded and multipart/form-data.

“The moral of the story is, if you have binary (non-alphanumeric) data (or a significantly sized payload) to transmit, use multipart/form-data. Otherwise, use application/x-www-form-urlencoded.”

---

Matt Bridges' answer in full:

The MIME types you mention are the two Content-Type headers for HTTP POST requests that user-agents (browsers) must support. The purpose of both of those types of requests is to send a list of name/value pairs to the server. Depending on the type and amount of data being transmitted, one of the methods will be more efficient than the other. To understand why, you have to look at what each is doing

staltz

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

---

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

---

jackgris

buildscript {
    repositories {
        mavenCentral()
        maven {
            url 'https://oss.sonatype.org/content/repositories/snapshots/'
        }
    }
    dependencies {
        classpath 'com.android.tools.build:gradle:0.9.+'
        classpath 'com.squareup.gradle:gradle-android-test-plugin:0.9.1-SNAPSHOT'

lttlrck

git branch -m old_branch new_branch         # Rename branch locally    
git push origin :old_branch                 # Delete the old branch    
git push --set-upstream origin new_branch   # Push the new branch, set local branch to track the new remote