Last active
June 22, 2021 15:17
-
-
Save quequotion/4e664a793063fef7dd60824cbc78f8c1 to your computer and use it in GitHub Desktop.
Audio dotfiles
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# Alsa Resampler | |
defaults.pcm.rate_converter "speexrate_best" | |
# Use PulseAudio by default | |
pcm.!default { | |
type pulse | |
fallback "sysdefault" | |
hint { | |
show on | |
description "Default ALSA Output (currently PulseAudio Sound Server)" | |
} | |
} | |
ctl.!default { | |
type pulse | |
fallback "sysdefault" | |
} | |
defaults.namehint.showall on | |
defaults.namehint.extended on |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
options snd_hda_intel enable_msi=1 enable=1,0 powersave=0 | |
install snd-hda-codec-hdmi /bin/false | |
blacklist snd-hda-codec-hdmi | |
blacklist snd-hda-codec-nvhdmi | |
blacklist pcspkr |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# This file is part of PulseAudio. | |
# | |
# PulseAudio is free software; you can redistribute it and/or modify | |
# it under the terms of the GNU Lesser General Public License as published by | |
# the Free Software Foundation; either version 2 of the License, or | |
# (at your option) any later version. | |
# | |
# PulseAudio is distributed in the hope that it will be useful, but | |
# WITHOUT ANY WARRANTY; without even the implied warranty of | |
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
# General Public License for more details. | |
# | |
# You should have received a copy of the GNU Lesser General Public License | |
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. | |
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for | |
## more information. Default values are commented out. Use either ; or # for | |
## commenting. | |
; daemonize = no | |
; fail = yes | |
; allow-module-loading = yes | |
; allow-exit = yes | |
; use-pid-file = yes | |
; system-instance = no | |
; local-server-type = user | |
; enable-shm = yes | |
; enable-memfd = yes | |
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB | |
; lock-memory = no | |
; cpu-limit = no | |
; high-priority = yes | |
; nice-level = -11 | |
; realtime-scheduling = yes | |
; realtime-priority = 5 | |
; exit-idle-time = 20 | |
; scache-idle-time = 20 | |
; dl-search-path = (depends on architecture) | |
; load-default-script-file = yes | |
; default-script-file = /etc/pulse/default.pa | |
; log-target = auto | |
; log-level = notice | |
; log-meta = no | |
; log-time = no | |
; log-backtrace = 0 | |
resample-method = speex-float-10 | |
avoid-resampling = true | |
enable-remixing = yes | |
; remixing-use-all-sink-channels = yes | |
remixing-use-all-sink-channels = no | |
remixing-produce-lfe = yes | |
remixing-consume-lfe = no | |
;lfe-crossover-freq = 250 | |
lfe-crossover-freq = 200 | |
; flat-volumes = yes | |
flat-volumes = no | |
; rlimit-fsize = -1 | |
; rlimit-data = -1 | |
; rlimit-stack = -1 | |
; rlimit-core = -1 | |
; rlimit-as = -1 | |
; rlimit-rss = -1 | |
; rlimit-nproc = -1 | |
; rlimit-nofile = 256 | |
; rlimit-memlock = -1 | |
; rlimit-locks = -1 | |
; rlimit-sigpending = -1 | |
; rlimit-msgqueue = -1 | |
; rlimit-nice = 31 | |
; rlimit-rtprio = 9 | |
; rlimit-rttime = 200000 | |
; default-sample-format = s16le | |
default-sample-rate = 48000 | |
; alternate-sample-rate = 48000 | |
default-sample-channels = 6 | |
; default-channel-map = front-left,front-right | |
default-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe | |
; default-fragments = 4 | |
; default-fragment-size-msec = 25 | |
; enable-deferred-volume = yes | |
; deferred-volume-safety-margin-usec = 8000 | |
; deferred-volume-extra-delay-usec = 0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/usr/bin/pulseaudio -nF | |
# | |
# This file is part of PulseAudio. | |
# | |
# PulseAudio is free software; you can redistribute it and/or modify it | |
# under the terms of the GNU Lesser General Public License as published by | |
# the Free Software Foundation; either version 2 of the License, or | |
# (at your option) any later version. | |
# | |
# PulseAudio is distributed in the hope that it will be useful, but | |
# WITHOUT ANY WARRANTY; without even the implied warranty of | |
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
# General Public License for more details. | |
# | |
# You should have received a copy of the GNU Lesser General Public License | |
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. | |
# This startup script is used only if PulseAudio is started per-user | |
# (i.e. not in system mode) | |
.fail | |
### Automatically restore the volume of streams and devices | |
load-module module-device-restore | |
load-module module-stream-restore | |
load-module module-card-restore | |
### Automatically augment property information from .desktop files | |
### stored in /usr/share/application | |
load-module module-augment-properties | |
### Should be after module-*-restore but before module-*-detect | |
load-module module-switch-on-port-available | |
### Load audio drivers statically | |
### (it's probably better to not load these drivers manually, but instead | |
### use module-udev-detect -- see below -- for doing this automatically) | |
#load-module module-alsa-sink | |
#load-module module-alsa-source device=hw:1,0 | |
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input | |
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input | |
#load-module module-null-sink | |
#load-module module-pipe-sink | |
### Automatically load driver modules depending on the hardware available | |
#.ifexists module-udev-detect.so | |
#load-module module-udev-detect | |
#.else | |
### Use the static hardware detection module (for systems that lack udev support) | |
#load-module module-detect | |
#.endif | |
### Manually specify device and driver | |
load-module module-alsa-card device_id="0" name="onboard" card_name="Realtek" sink_name="ALC892out" source_name="ALC892in" profile="output:iec958-ac3-surround-51+input:analog-stereo" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=no | |
# pulseaudio-equalizer | |
#load-module module-equalizer-sink sink_name="ALC892out.eq" sink_master="ALC892out" | |
### Automatically connect sink and source if JACK server is present | |
#.ifexists module-jackdbus-detect.so | |
#.nofail | |
#load-module module-jackdbus-detect channels=2 | |
#.fail | |
#.endif | |
### Automatically load driver modules for Bluetooth hardware | |
.ifexists module-bluetooth-policy.so | |
load-module module-bluetooth-policy | |
.endif | |
.ifexists module-bluetooth-discover.so | |
load-module module-bluetooth-discover | |
.endif | |
### Load several protocols | |
load-module module-dbus-protocol | |
.ifexists module-esound-protocol-unix.so | |
load-module module-esound-protocol-unix | |
.endif | |
load-module module-native-protocol-unix | |
### Network access (may be configured with paprefs, so leave this commented | |
### here if you plan to use paprefs) | |
#load-module module-esound-protocol-tcp | |
#load-module module-native-protocol-tcp | |
#load-module module-zeroconf-publish | |
### Load the RTP receiver module (also configured via paprefs, see above) | |
#load-module module-rtp-recv | |
### Load the RTP sender module (also configured via paprefs, see above) | |
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" | |
#load-module module-rtp-send source=rtp.monitor | |
### Load additional modules from GSettings. This can be configured with the paprefs tool. | |
### Please keep in mind that the modules configured by paprefs might conflict with manually | |
### loaded modules. | |
.ifexists module-gsettings.so | |
.nofail | |
load-module module-gsettings | |
.fail | |
.endif | |
### Automatically restore the default sink/source when changed by the user | |
### during runtime | |
### NOTE: This should be loaded as early as possible so that subsequent modules | |
### that look up the default sink/source get the right value | |
load-module module-default-device-restore | |
### Make sure we always have a sink around, even if it is a null sink. | |
load-module module-always-sink | |
### Honour intended role device property | |
load-module module-intended-roles | |
### Automatically suspend sinks/sources that become idle for too long | |
load-module module-suspend-on-idle | |
### If autoexit on idle is enabled we want to make sure we only quit | |
### when no local session needs us anymore. | |
.ifexists module-console-kit.so | |
load-module module-console-kit | |
.endif | |
.ifexists module-systemd-login.so | |
load-module module-systemd-login | |
.endif | |
### Enable positioned event sounds | |
load-module module-position-event-sounds | |
### Cork music/video streams when a phone stream is active | |
load-module module-role-cork | |
### Modules to allow autoloading of filters (such as echo cancellation) | |
### on demand. module-filter-heuristics tries to determine what filters | |
### make sense, and module-filter-apply does the heavy-lifting of | |
### loading modules and rerouting streams. | |
load-module module-filter-heuristics | |
load-module module-filter-apply | |
### Make some devices default | |
#set-default-sink output | |
#set-default-sink alsa_output.pci-0000_00_1b.0.iec958-ac3-surround-51.equalizer | |
set-default-sink ALC892out | |
#set-default-source input | |
#set-default-source alsa_input.pci-0000_00_1b.0.analog-stereo | |
set-default-source ALC892in | |
#use pactl; pacmd and default.pa fail to parse multi-channel volumes | |
#set-sink-volume ALC892out 70% 70% 100% 100% 100% 75% | |
#Left to Mono (for stereo source with different content in each channel; don'T mix lfe) | |
load-module module-remap-sink sink_name=Left-to-Mono sink_properties="device.description='Left to Mono (5.1 AC3 on ALC892 Digital)'" master=ALC892out channels=2 master_channel_map=right,left channel_map=left,left remix=no | |
#Right to Mono (for stereo source with different content in each channel; don't mix lfe) | |
load-module module-remap-sink sink_name=Right-to-Mono sink_properties="device.description='Right to Mono (5.1 AC3 on ALC892 Digital)'" master=ALC892out channels=2 master_channel_map=right,left channel_map=right,right remix=no | |
#Center-Mono (downmix to center channel; forbid lfe) | |
load-module module-remap-sink sink_name=Center-Mono sink_properties="device.description='Center Mono (5.1 AC3 on ALC892 Digital)'" master=ALC892out channels=1 master_channel_map=center channel_map=mono remix=no | |
#Music (duplicate stereo on surround speakers; allow lfe; requires volume mixing) | |
#load-module module-remap-sink sink_name=Music sink_properties="device.description='Music (5.1 AC3 on ALC892 Digital)'" master=ALC892out channels=4 master_channel_map=front-left,front-right,rear-left,rear-right channel_map=left,right,left,right remix=yes | |
#set-sink-volume Music 70% 70% 100% 100% | |
#BGM (downmix to rear speakers; forbid lfe; requires volume mixing) | |
load-module module-remap-sink sink_name=BGM sink_properties="device.description='BGM (5.1 AC3 on ALC892 Digital)'" master=ALC892out channels=2 master_channel_map=rear-left,rear-right channel_map=left,right remix=no | |
#set-sink-volume BGM 70% | |
#Analog loopback | |
#load-module module-loopback source=ALC892in sink=Music latency_msec=1 sink_input_properties="media.name='Analog Input'" |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment