am62p boot up

NOTICE:  BL31: v2.9(debug):v2.9.0-353-g2503c8f3204c-dirty
NOTICE:  BL31: Built : 11:46:25, Jul 25 2023
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 287
INFO:    SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--am62p-presil-0.5 (Chill ')
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: cortex_a53: CPU workaround for 1530924 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x82000000
INFO:    SPSR = 0x3c9
Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 6.5.0-rc5+ (a0132425@uda0132425) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35)) 12.3.1 20230626, GNU ld (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35)) 2.40.0.20230627) #21 SMP PREEMPT Fri Aug 11 11:27:19 IST 2023
KASLR disabled due to lack of seed
Machine model: Texas Instruments AM62P5 SK
earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
printk: bootconsole [ns16550a0] enabled
efi: UEFI not found.
Reserved memory: created DMA memory pool at 0x000000009c900000, size 30 MiB
OF: reserved mem: initialized node r5f-dma-memory@9c900000, compatible id shared-dma-pool
OF: reserved mem: 0x000000009c900000..0x000000009e6fffff (30720 KiB) nomap non-reusable r5f-dma-memory@9c900000
OF: reserved mem: 0x000000009e780000..0x000000009e7fffff (512 KiB) nomap non-reusable tfa@9e780000
OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
Zone ranges:
  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
  DMA32    empty
  Normal   [mem 0x0000000100000000-0x00000009ffffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080000000-0x000000009c8fffff]
  node   0: [mem 0x000000009c900000-0x000000009e6fffff]
  node   0: [mem 0x000000009e700000-0x000000009e77ffff]
  node   0: [mem 0x000000009e780000-0x000000009fffffff]
  node   0: [mem 0x00000000a0000000-0x00000000ffffffff]
  node   0: [mem 0x0000000880000000-0x00000009ffffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.4
percpu: Embedded 1 pages/cpu s23456 r8192 d33888 u65536
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: ARM erratum 845719
alternatives: applying boot alternatives
Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rdinit=/bin/sh
Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 130944
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
software IO TLB: area num 4.
software IO TLB: mapped [mem 0x00000000fbff0000-0x00000000ffff0000] (64MB)
Memory: 8236352K/8388608K available (3520K kernel code, 758K rwdata, 896K rodata, 1216K init, 545K bss, 152256K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 256 SPIs implemented
GICv3: 0 Extended SPIs implemented
Root IRQ handler: 0xffff8000800100b4
GICv3: GICv3 features: 16 PPIs
GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
ITS [mem 0x01820000-0x0182ffff]
GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
ITS@0x0000000001820000: allocated 1048576 Devices @880800000 (flat, esz 8, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000880120000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000880130000
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer(s) running at 200.00MHz (phys).
clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 16384 (order: 1, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 1, 131072 bytes, linear)
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 1000.
Platform MSI: msi-controller@1820000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
GICv3: CPU1: using allocated LPI pending table @0x0000000880140000
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
GICv3: CPU2: using allocated LPI pending table @0x0000000880150000
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
GICv3: CPU3: using allocated LPI pending table @0x0000000880160000
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: applying system-wide alternatives
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
ASID allocator initialised with 65536 entries
Modules: 1926 pages in range for non-PLT usage
Modules: 32646 pages in range for PLT usage
k3-chipinfo 43000014.chipid: Family:AM62PX rev:SR1.0 JTAGID[0x0bb9d02f] Detected
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
FPGA manager framework
clocksource: Switched to clocksource arch_sys_counter
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 320K
workingset: timestamp_bits=46 max_order=17 bucket_order=0
io scheduler mq-deadline registered
io scheduler kyber registered
pinctrl-single 4084000.pinctrl: 34 pins, size 136
pinctrl-single f4000.pinctrl: 171 pins, size 684
Serial: 8250/16550 driver, 16 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
VFIO - User Level meta-driver version: 0.3
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.4--am62p-presil-0.5 (Chill ')
printk: console [ttyS2] disabled
2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 16, base_baud = 230400) is a 8250
printk: console [ttyS2] enabled
printk: console [ttyS2] enabled
printk: bootconsole [ns16550a0] disabled
printk: bootconsole [ns16550a0] disabled
clk: Disabling unused clocks
Freeing unused kernel memory: 1216K
Run /bin/sh as init process
/ # uname -a
uname -a
Linux (none) 6.5.0-rc5+ #20 SMP PREEMPT Fri Aug 11 10:36:07 IST 2023 aarch64 GNU/Linux
/ #