Created
September 11, 2023 11:18
-
-
Save raku-cat/1789c4543a89769040bfd884a1fa70fa to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.12-arch1-1] (local build) | |
| Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Device Model: SATA SSD | |
| Serial Number: 20050610240627 | |
| LU WWN Device Id: 0 000000 000000000 | |
| Firmware Version: SBFMKB.3 | |
| User Capacity: 1,024,209,543,168 bytes [1.02 TB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| TRIM Command: Available | |
| Device is: Not in smartctl database 7.3/5528 | |
| ATA Version is: ACS-4 (minor revision not indicated) | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Mon Sep 11 06:17:47 2023 CDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: (65535) seconds. | |
| Offline data collection | |
| capabilities: (0x79) SMART execute Offline immediate. | |
| No Auto Offline data collection support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 30) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 6) minutes. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 698 | |
| 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 88 | |
| 168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0 | |
| 170 Unknown_Attribute 0x0003 085 085 010 Pre-fail Always - 151 | |
| 173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 393227 | |
| 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 13 | |
| 194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33) | |
| 218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0 | |
| 231 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 99 | |
| 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 2299 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 0 | |
| Note: revision number not 1 implies that no selective self-test has ever been run | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| The above only provides legacy SMART information - try 'smartctl -x' for more | |
| ====================================================================================== | |
| smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.12-arch1-1] (local build) | |
| Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Samsung based SSDs | |
| Device Model: Samsung SSD 860 EVO 1TB | |
| Serial Number: S599NE0M804366M | |
| LU WWN Device Id: 5 002538 e198132c6 | |
| Firmware Version: RVT03B6Q | |
| User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| TRIM Command: Available, deterministic, zeroed | |
| Device is: In smartctl database 7.3/5528 | |
| ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Mon Sep 11 06:18:26 2023 CDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 85) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 27181 | |
| 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 325 | |
| 177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 26 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0032 069 052 000 Old_age Always - 31 | |
| 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 | |
| 199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 67 | |
| 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 131 | |
| 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 28805792124 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| 256 0 65535 Read_scanning was never started | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| The above only provides legacy SMART information - try 'smartctl -x' for more | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment