Skip to content

Instantly share code, notes, and snippets.

@rally25rs
Created February 6, 2020 11:10
Show Gist options
  • Save rally25rs/bcde16222a4a08508d567ad3fa47d96e to your computer and use it in GitHub Desktop.
Save rally25rs/bcde16222a4a08508d567ad3fa47d96e to your computer and use it in GitHub Desktop.
Printer settings dump
Send: M503
Recv: echo: G21 ; Units in mm (mm)
Recv:
Recv: echo:Filament settings: Disabled
Recv: echo: M200 D1.75
Recv: echo: M200 D0
Recv: echo:Steps per unit:
Recv: echo: M92 X93.00 Y93.00 Z137.00 E104.00
Recv: echo:Maximum feedrates (units/s):
Recv: echo: M203 X300.00 Y300.00 Z5.00 E25.00
Recv: echo:Maximum Acceleration (units/s2):
Recv: echo: M201 X400.00 Y400.00 Z20.00 E10000.00
Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
Recv: echo: M204 P400.00 R400.00 T400.00
Recv: echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
Recv: echo: M205 B20000.00 S0.00 T0.00 J0.01
Recv: echo:Home offset:
Recv: echo: M206 X0.00 Y0.00 Z0.00
Recv: echo:PID settings:
Recv: echo: M301 P18.60 I0.98 D88.46
Recv: echo: M304 P14.00 I0.90 D120.40
Recv: echo:Stepper driver current:
Recv: echo: M906 X650 Y650 Z550
Recv: echo: M906 T0 E550
Recv:
Recv: echo:Driver stepping mode:
Recv: echo: M569 S1 T0 E
Recv: echo:Filament load/unload lengths:
Recv: echo: M603 L0.00 U100.00
Recv: ok
Send: M122
Recv: X Y Z E
Recv: Address 0 0 0 0
Recv: Enabled false false false false
Recv: Set current 650 650 550 550
Recv: RMS current 642 642 520 520
Recv: MAX current 905 905 733 733
Recv: Run current 20/31 20/31 16/31 16/31
Recv: Hold current 10/31 10/31 8/31 8/31
Recv: CS actual 10/31 10/31 8/31 8/31
Recv: PWM scale 12 12 10 18
Recv: vsense 1=.18 1=.18 1=.18 1=.18
Recv: stealthChop false false false true
Recv: msteps 16 16 2 16
Recv: tstep max max max max
Recv: pwm
Recv: threshold
Recv: [mm/s]
Recv: OT prewarn false false false false
Recv: OT prewarn has
Recv: been triggered false false false false
Recv: off time 3 3 3 3
Recv: blank time 24 24 24 24
Recv: hysteresis
Recv: -end -1 -1 -1 -1
Recv: -start 1 1 1 1
Recv: Stallguard thrs 0 0 0 0
Recv: DRVSTATUS X Y Z E
Recv: stst * * * *
Recv: olb
Recv: ola
Recv: s2gb
Recv: s2ga
Recv: otpw
Recv: ot
Recv: 157C
Recv: 150C
Recv: 143C
Recv: 120C
Recv: s2vsa
Recv: s2vsb
Recv: Driver registers:
Recv: X 0x80:0A:00:00
Recv: Y 0x80:0A:00:00
Recv: Z 0x80:08:00:00
Recv: E 0xC0:08:00:00
Recv:
Recv:
Recv: Testing X connection... OK
Recv: Testing Y connection... OK
Recv: Testing Z connection... OK
Recv: Testing E connection... OK
Recv: ok
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment