- make
- gcc
- g++
To install those two, you can run
apt-get update && apt-get install make gcc g++.
(Alternatively, you can install the package build-essential)
- use
wget <URL>. For example: usewget http://www.inet.no/dante/files/dante-1.4.2.tar.gz.
- use
tar xvfz <archive filename>. For example: usetar xvfz dante-1.4.2.tar.gz
- Select extracted directory as current location, use
cd <path>. For examplecd dante-1.4.2. - Prepare for build with this command:
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --disable-client --without-libwrap --without-bsdauth --without-gssapi --without-krb5 --without-upnp --without-pam. - Build the source and install compiled source: Use
make && make install.
- init.d can be found at:
/etc/init.d/sockd. Its content should be like this:
#! /bin/sh
### BEGIN INIT INFO
# Provides: sockd
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start the dante SOCKS server.
# Description: SOCKS (v4 and v5) proxy server daemon (sockd).
# This server allows clients to connect to it and
# request proxying of TCP or UDP network traffic
# with extensive configuration possibilities.
### END INIT INFO
#
# dante SOCKS server init.d file. Based on /etc/init.d/skeleton:
# Version: @(#)skeleton 1.8 03-Mar-1998 miquels@cistron.nl
# Via: https://gitorious.org/dante/pkg-debian
PATH=/sbin:/usr/sbin:/bin:/usr/bin
NAME=sockd
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS="-D"
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
DESC="Dante SOCKS daemon"
CONFFILE=/etc/$NAME.conf
# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0
# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions
set -e
# This function makes sure that the Dante server can write to the pid-file.
touch_pidfile ()
{
if [ -r $CONFFILE ]; then
uid="`sed -n -e 's/[[:space:]]//g' -e 's/#.*//' -e '/^user\.privileged/{s/[^:]*://p;q;}' $CONFFILE`"
if [ -n "$uid" ]; then
touch $PIDFILE
chown $uid $PIDFILE
fi
fi
}
case "$1" in
start)
if ! egrep -cve '^ *(#|$)' \
-e '^(logoutput|user\.((not)?privileged|libwrap)):' \
$CONFFILE > /dev/null
then
echo "Not starting $DESC: not configured."
exit 0
fi
echo -n "Starting $DESC: "
touch_pidfile
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
echo "$NAME."
;;
stop)
echo -n "Stopping $DESC: "
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
echo "$NAME."
;;
reload|force-reload)
#
# If the daemon can reload its config files on the fly
# for example by sending it SIGHUP, do it here.
#
# If the daemon responds to changes in its config file
# directly anyway, make this a do-nothing entry.
#
echo "Reloading $DESC configuration files."
start-stop-daemon --stop --signal 1 --quiet --pidfile \
$PIDFILE --exec $DAEMON -- -D
;;
restart)
#
# If the "reload" option is implemented, move the "force-reload"
# option to the "reload" entry above. If not, "force-reload" is
# just the same as "restart".
#
echo -n "Restarting $DESC: "
start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON
sleep 1
touch_pidfile
start-stop-daemon --start --quiet --pidfile $PIDFILE \
--exec $DAEMON -- -D
echo "$NAME."
;;
status)
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
;;
*)
N=/etc/init.d/$NAME
# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $N {start|stop|restart|status|force-reload}" >&2
exit 1
;;
esac
exit 0
- Set permission for the file. Use
chmod +x /etc/init.d/sockd. - Update the service list. Use
update-rc.d sockd defaults.
- Config file is located at:
/etc/sockd.conf. Its content should be like:
# listen on... can be an IP or an interface
internal: eth0 port = 1080
# send out through... can be an IP or an interface
external: eth0
# for user auth run as this user
user.privileged: root
# otherwise run as this user
user.unprivileged: nobody
# auth with user login, passwd
socksmethod: username
# log to this file
logoutput: /var/log/sockd.log
# allow everyone from everywhere so long as they auth, log errors
client pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
log: error # connect disconnect iooperation
socksmethod: username
}
# allow everyone from everywhere so long as they auth, log errors
socks pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
command: bind connect udpassociate
log: error # connect disconnect iooperation
socksmethod: username
}
# generic pass statement for incoming connections/packets
# because something about no support for auth with bindreply udpreply ?
socks pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
command: bindreply udpreply
log: error # connect disconnect iooperation
}
Now you can use /etc/init.d/sockd as a service. For example: /etc/init.d/sockd start or /etc/init.d/sockd stop.
Make a user with no home or shell just for authing the proxy replace {PASSWORD} and {USER} with the password and the username.
useradd -M -s /usr/sbin/nologin -p $(openssl passwd -1 {PASSWORD}) {USER}
-M avoids making a home, -s /usr/sbin/nologin sets the shell to nologin so they get kicked instantly (Take note that /usr/sbin/nologin may not be correct for everyone).
-p sets the password and pushes it through openssl because it needs to be encrypted in passwd
Obviously full user accounts can be used, but this is raw UN/PW sent over cleartext so I would advise not using important accounts, or by using a different / multiple auth method(s)
You can combine with ssh's config file to deny login for Danted's user so that the user can be only used for Danted auth.
For example: DenyUsers root, or DenyUsers user1 user2 user3
- Ubuntu 16.04 LTS (Worked).