Skip to content

Instantly share code, notes, and snippets.

@randy3k
Last active July 2, 2023 17:58
Show Gist options
  • Save randy3k/731036bc8ea90cb86dd4ba4a16d4514a to your computer and use it in GitHub Desktop.
Save randy3k/731036bc8ea90cb86dd4ba4a16d4514a to your computer and use it in GitHub Desktop.
Ender 5 Pro Cura G-code
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning
G1 X0 Y0 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
; M140 S{material_bed_temperature_layer_0} ; start preheating the bed
; M190 S{material_bed_temperature_layer_0} ; heat to Cura Bed setting
G28 ;Home
; G29 ;Auto Bed Leveling
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M104 S{material_print_temperature_layer_0} ?T0 ; start preheating hotend
M109 S{material_print_temperature_layer_0} ?T0 ; heat to Cura Hotend
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment