Created
October 14, 2020 00:52
-
-
Save raplin/633dd7febb7a9d65b7cf196f04156c4b to your computer and use it in GitHub Desktop.
iw list from Netgear R7800 (a great router) ; dual QCA9984 4x4ac at 30dbm - ath10k_ct
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| iw list | |
| Wiphy phy1 | |
| max # scan SSIDs: 16 | |
| max scan IEs length: 195 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports RSN-IBSS. | |
| Device supports AP-side u-APSD. | |
| Supported Ciphers: | |
| * WEP40 (00-0f-ac:1) | |
| * WEP104 (00-0f-ac:5) | |
| * TKIP (00-0f-ac:2) | |
| * CCMP-128 (00-0f-ac:4) | |
| * CMAC (00-0f-ac:6) | |
| * CMAC-256 (00-0f-ac:13) | |
| * GMAC-128 (00-0f-ac:11) | |
| * GMAC-256 (00-0f-ac:12) | |
| * GCMP-128 (00-0f-ac:8) | |
| * GCMP-256 (00-0f-ac:9) | |
| * CCMP-256 (00-0f-ac:10) | |
| Available Antennas: TX 0xf RX 0xf | |
| Configured Antennas: TX 0xf RX 0xf | |
| Supported interface modes: | |
| * IBSS | |
| * managed | |
| * AP | |
| * AP/VLAN | |
| * monitor | |
| * mesh point | |
| * P2P-client | |
| * P2P-GO | |
| * P2P-device | |
| Band 1: | |
| Capabilities: 0x19ef | |
| RX LDPC | |
| HT20/HT40 | |
| SM Power Save disabled | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| TX STBC | |
| RX STBC 1-stream | |
| Max AMSDU length: 7935 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: 8 usec (0x06) | |
| HT TX/RX MCS rate indexes supported: 0-31 | |
| VHT Capabilities (0x339b79b2): | |
| Max MPDU length: 11454 | |
| Supported Channel Width: neither 160 nor 80+80 | |
| RX LDPC | |
| short GI (80 MHz) | |
| TX STBC | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| MU Beamformee | |
| RX antenna pattern consistency | |
| TX antenna pattern consistency | |
| VHT RX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT RX highest supported: 0 Mbps | |
| VHT TX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT TX highest supported: 0 Mbps | |
| Bitrates (non-HT): | |
| * 1.0 Mbps | |
| * 2.0 Mbps (short preamble supported) | |
| * 5.5 Mbps (short preamble supported) | |
| * 11.0 Mbps (short preamble supported) | |
| * 6.0 Mbps | |
| * 9.0 Mbps | |
| * 12.0 Mbps | |
| * 18.0 Mbps | |
| * 24.0 Mbps | |
| * 36.0 Mbps | |
| * 48.0 Mbps | |
| * 54.0 Mbps | |
| Frequencies: | |
| * 2412 MHz [1] (30.0 dBm) | |
| * 2417 MHz [2] (30.0 dBm) | |
| * 2422 MHz [3] (30.0 dBm) | |
| * 2427 MHz [4] (30.0 dBm) | |
| * 2432 MHz [5] (30.0 dBm) | |
| * 2437 MHz [6] (30.0 dBm) | |
| * 2442 MHz [7] (30.0 dBm) | |
| * 2447 MHz [8] (30.0 dBm) | |
| * 2452 MHz [9] (30.0 dBm) | |
| * 2457 MHz [10] (30.0 dBm) | |
| * 2462 MHz [11] (30.0 dBm) | |
| * 2467 MHz [12] (disabled) | |
| * 2472 MHz [13] (disabled) | |
| * 2484 MHz [14] (disabled) | |
| Supported commands: | |
| * new_interface | |
| * set_interface | |
| * new_key | |
| * start_ap | |
| * new_station | |
| * new_mpath | |
| * set_mesh_config | |
| * set_bss | |
| * authenticate | |
| * associate | |
| * deauthenticate | |
| * disassociate | |
| * join_ibss | |
| * join_mesh | |
| * remain_on_channel | |
| * set_tx_bitrate_mask | |
| * frame | |
| * frame_wait_cancel | |
| * set_wiphy_netns | |
| * set_channel | |
| * set_wds_peer | |
| * probe_client | |
| * set_noack_map | |
| * register_beacons | |
| * start_p2p_device | |
| * set_mcast_rate | |
| * testmode | |
| * connect | |
| * disconnect | |
| * channel_switch | |
| * set_qos_map | |
| * set_multicast_to_unicast | |
| Supported TX frame types: | |
| * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| Supported RX frame types: | |
| * IBSS: 0x40 0xb0 0xc0 0xd0 | |
| * managed: 0x40 0xd0 | |
| * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * mesh point: 0xb0 0xc0 0xd0 | |
| * P2P-client: 0x40 0xd0 | |
| * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * P2P-device: 0x40 0xd0 | |
| software interface modes (can always be added): | |
| * AP/VLAN | |
| * monitor | |
| valid interface combinations: | |
| * #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1, | |
| total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz } | |
| HT Capability overrides: | |
| * MCS: ff ff ff ff ff ff ff ff ff ff | |
| * maximum A-MSDU length | |
| * supported channel width | |
| * short GI for 40 MHz | |
| * max A-MPDU length exponent | |
| * min MPDU start spacing | |
| Device supports TX status socket option. | |
| Device supports HT-IBSS. | |
| Device supports SAE with AUTHENTICATE command | |
| Device supports scan flush. | |
| Device supports AP scan. | |
| Device supports per-vif TX power setting | |
| Driver supports full state transitions for AP/GO clients | |
| Driver supports a userspace MPM | |
| Driver/device bandwidth changes during BSS lifetime (AP/GO mode) | |
| Device supports static SMPS | |
| Device supports configuring vdev MAC-addr on create. | |
| Supported extended features: | |
| * [ VHT_IBSS ]: VHT-IBSS | |
| * [ RRM ]: RRM | |
| * [ SET_SCAN_DWELL ]: scan dwell setting | |
| * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records | |
| * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 | |
| * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs | |
| Wiphy phy0 | |
| max # scan SSIDs: 16 | |
| max scan IEs length: 199 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports RSN-IBSS. | |
| Device supports AP-side u-APSD. | |
| Supported Ciphers: | |
| * WEP40 (00-0f-ac:1) | |
| * WEP104 (00-0f-ac:5) | |
| * TKIP (00-0f-ac:2) | |
| * CCMP-128 (00-0f-ac:4) | |
| * CMAC (00-0f-ac:6) | |
| * CMAC-256 (00-0f-ac:13) | |
| * GMAC-128 (00-0f-ac:11) | |
| * GMAC-256 (00-0f-ac:12) | |
| * GCMP-128 (00-0f-ac:8) | |
| * GCMP-256 (00-0f-ac:9) | |
| * CCMP-256 (00-0f-ac:10) | |
| Available Antennas: TX 0xf RX 0xf | |
| Configured Antennas: TX 0xf RX 0xf | |
| Supported interface modes: | |
| * IBSS | |
| * managed | |
| * AP | |
| * AP/VLAN | |
| * monitor | |
| * mesh point | |
| * P2P-client | |
| * P2P-GO | |
| * P2P-device | |
| Band 2: | |
| Capabilities: 0x19ef | |
| RX LDPC | |
| HT20/HT40 | |
| SM Power Save disabled | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| TX STBC | |
| RX STBC 1-stream | |
| Max AMSDU length: 7935 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: 8 usec (0x06) | |
| HT TX/RX MCS rate indexes supported: 0-31 | |
| VHT Capabilities (0x339b79fa): | |
| Max MPDU length: 11454 | |
| Supported Channel Width: 160 MHz, 80+80 MHz | |
| RX LDPC | |
| short GI (80 MHz) | |
| short GI (160/80+80 MHz) | |
| TX STBC | |
| SU Beamformer | |
| SU Beamformee | |
| MU Beamformer | |
| MU Beamformee | |
| RX antenna pattern consistency | |
| TX antenna pattern consistency | |
| VHT RX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT RX highest supported: 1560 Mbps | |
| VHT TX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT TX highest supported: 1560 Mbps | |
| Bitrates (non-HT): | |
| * 6.0 Mbps | |
| * 9.0 Mbps | |
| * 12.0 Mbps | |
| * 18.0 Mbps | |
| * 24.0 Mbps | |
| * 36.0 Mbps | |
| * 48.0 Mbps | |
| * 54.0 Mbps | |
| Frequencies: | |
| * 5180 MHz [36] (23.0 dBm) | |
| * 5200 MHz [40] (23.0 dBm) | |
| * 5220 MHz [44] (23.0 dBm) | |
| * 5240 MHz [48] (23.0 dBm) | |
| * 5260 MHz [52] (23.0 dBm) (radar detection) | |
| * 5280 MHz [56] (23.0 dBm) (radar detection) | |
| * 5300 MHz [60] (23.0 dBm) (radar detection) | |
| * 5320 MHz [64] (23.0 dBm) (radar detection) | |
| * 5500 MHz [100] (23.0 dBm) (radar detection) | |
| * 5520 MHz [104] (23.0 dBm) (radar detection) | |
| * 5540 MHz [108] (23.0 dBm) (radar detection) | |
| * 5560 MHz [112] (23.0 dBm) (radar detection) | |
| * 5580 MHz [116] (23.0 dBm) (radar detection) | |
| * 5600 MHz [120] (23.0 dBm) (radar detection) | |
| * 5620 MHz [124] (23.0 dBm) (radar detection) | |
| * 5640 MHz [128] (23.0 dBm) (radar detection) | |
| * 5660 MHz [132] (23.0 dBm) (radar detection) | |
| * 5680 MHz [136] (23.0 dBm) (radar detection) | |
| * 5700 MHz [140] (23.0 dBm) (radar detection) | |
| * 5720 MHz [144] (23.0 dBm) (radar detection) | |
| * 5745 MHz [149] (30.0 dBm) | |
| * 5765 MHz [153] (30.0 dBm) | |
| * 5785 MHz [157] (30.0 dBm) | |
| * 5805 MHz [161] (30.0 dBm) | |
| * 5825 MHz [165] (30.0 dBm) | |
| * 5845 MHz [169] (disabled) | |
| * 5865 MHz [173] (disabled) | |
| Supported commands: | |
| * new_interface | |
| * set_interface | |
| * new_key | |
| * start_ap | |
| * new_station | |
| * new_mpath | |
| * set_mesh_config | |
| * set_bss | |
| * authenticate | |
| * associate | |
| * deauthenticate | |
| * disassociate | |
| * join_ibss | |
| * join_mesh | |
| * remain_on_channel | |
| * set_tx_bitrate_mask | |
| * frame | |
| * frame_wait_cancel | |
| * set_wiphy_netns | |
| * set_channel | |
| * set_wds_peer | |
| * probe_client | |
| * set_noack_map | |
| * register_beacons | |
| * start_p2p_device | |
| * set_mcast_rate | |
| * testmode | |
| * connect | |
| * disconnect | |
| * channel_switch | |
| * set_qos_map | |
| * set_multicast_to_unicast | |
| Supported TX frame types: | |
| * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| Supported RX frame types: | |
| * IBSS: 0x40 0xb0 0xc0 0xd0 | |
| * managed: 0x40 0xd0 | |
| * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * mesh point: 0xb0 0xc0 0xd0 | |
| * P2P-client: 0x40 0xd0 | |
| * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * P2P-device: 0x40 0xd0 | |
| software interface modes (can always be added): | |
| * AP/VLAN | |
| * monitor | |
| valid interface combinations: | |
| * #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1, | |
| total <= 16, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz, 80+80 MHz, 160 MHz } | |
| HT Capability overrides: | |
| * MCS: ff ff ff ff ff ff ff ff ff ff | |
| * maximum A-MSDU length | |
| * supported channel width | |
| * short GI for 40 MHz | |
| * max A-MPDU length exponent | |
| * min MPDU start spacing | |
| Device supports TX status socket option. | |
| Device supports HT-IBSS. | |
| Device supports SAE with AUTHENTICATE command | |
| Device supports scan flush. | |
| Device supports AP scan. | |
| Device supports per-vif TX power setting | |
| Driver supports full state transitions for AP/GO clients | |
| Driver supports a userspace MPM | |
| Driver/device bandwidth changes during BSS lifetime (AP/GO mode) | |
| Device supports static SMPS | |
| Device supports configuring vdev MAC-addr on create. | |
| Supported extended features: | |
| * [ VHT_IBSS ]: VHT-IBSS | |
| * [ RRM ]: RRM | |
| * [ SET_SCAN_DWELL ]: scan dwell setting | |
| * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records | |
| * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 | |
| * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment