Created
October 13, 2020 22:36
-
-
Save raplin/f059ec9415b556c5cc51e7c5e4caf7f6 to your computer and use it in GitHub Desktop.
BCM43465 PCIe card iw list (4x4 ac 160Mhz, dual band)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This card is pretty dope; gets hot at high MIMO tx power, needs cooling! Unclear if these listed TX powers are correct at the antenna port.. | |
| iw list | |
| Wiphy phy1 | |
| max # scan SSIDs: 10 | |
| max scan IEs length: 2048 bytes | |
| max # sched scan SSIDs: 0 | |
| max # match sets: 0 | |
| max # scan plans: 1 | |
| max scan plan interval: -1 | |
| max scan plan iterations: 0 | |
| Retry short limit: 7 | |
| Retry long limit: 4 | |
| Coverage class: 0 (up to 0m) | |
| Device supports roaming. | |
| Supported Ciphers: | |
| * WEP40 (00-0f-ac:1) | |
| * WEP104 (00-0f-ac:5) | |
| * TKIP (00-0f-ac:2) | |
| * CCMP-128 (00-0f-ac:4) | |
| * CMAC (00-0f-ac:6) | |
| Available Antennas: TX 0 RX 0 | |
| Supported interface modes: | |
| * IBSS | |
| * managed | |
| * AP | |
| * P2P-client | |
| * P2P-GO | |
| * P2P-device | |
| Band 1: | |
| Capabilities: 0x1022 | |
| HT20/HT40 | |
| Static SM Power Save | |
| RX HT20 SGI | |
| No RX STBC | |
| Max AMSDU length: 3839 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: 16 usec (0x07) | |
| HT TX/RX MCS rate indexes supported: 0-31 | |
| Bitrates (non-HT): | |
| * 1.0 Mbps | |
| * 2.0 Mbps (short preamble supported) | |
| * 5.5 Mbps (short preamble supported) | |
| * 11.0 Mbps (short preamble supported) | |
| * 6.0 Mbps | |
| * 9.0 Mbps | |
| * 12.0 Mbps | |
| * 18.0 Mbps | |
| * 24.0 Mbps | |
| * 36.0 Mbps | |
| * 48.0 Mbps | |
| * 54.0 Mbps | |
| Frequencies: | |
| * 2412 MHz [1] (20.0 dBm) | |
| * 2417 MHz [2] (20.0 dBm) | |
| * 2422 MHz [3] (20.0 dBm) | |
| * 2427 MHz [4] (20.0 dBm) | |
| * 2432 MHz [5] (20.0 dBm) | |
| * 2437 MHz [6] (20.0 dBm) | |
| * 2442 MHz [7] (20.0 dBm) | |
| * 2447 MHz [8] (20.0 dBm) | |
| * 2452 MHz [9] (20.0 dBm) | |
| * 2457 MHz [10] (20.0 dBm) | |
| * 2462 MHz [11] (20.0 dBm) | |
| * 2467 MHz [12] (disabled) | |
| * 2472 MHz [13] (disabled) | |
| * 2484 MHz [14] (disabled) | |
| Band 2: | |
| Capabilities: 0x1062 | |
| HT20/HT40 | |
| Static SM Power Save | |
| RX HT20 SGI | |
| RX HT40 SGI | |
| No RX STBC | |
| Max AMSDU length: 3839 bytes | |
| DSSS/CCK HT40 | |
| Maximum RX AMPDU length 65535 bytes (exponent: 0x003) | |
| Minimum RX AMPDU time spacing: 16 usec (0x07) | |
| HT TX/RX MCS rate indexes supported: 0-31 | |
| VHT Capabilities (0x0c1b4064): | |
| Max MPDU length: 3895 | |
| Supported Channel Width: 160 MHz | |
| short GI (80 MHz) | |
| short GI (160/80+80 MHz) | |
| MU Beamformer | |
| MU Beamformee | |
| VHT RX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT RX highest supported: 0 Mbps | |
| VHT TX MCS set: | |
| 1 streams: MCS 0-9 | |
| 2 streams: MCS 0-9 | |
| 3 streams: MCS 0-9 | |
| 4 streams: MCS 0-9 | |
| 5 streams: not supported | |
| 6 streams: not supported | |
| 7 streams: not supported | |
| 8 streams: not supported | |
| VHT TX highest supported: 0 Mbps | |
| Bitrates (non-HT): | |
| * 6.0 Mbps | |
| * 9.0 Mbps | |
| * 12.0 Mbps | |
| * 18.0 Mbps | |
| * 24.0 Mbps | |
| * 36.0 Mbps | |
| * 48.0 Mbps | |
| * 54.0 Mbps | |
| Frequencies: | |
| * 5170 MHz [34] (disabled) | |
| * 5180 MHz [36] (20.0 dBm) | |
| * 5190 MHz [38] (20.0 dBm) | |
| * 5200 MHz [40] (20.0 dBm) | |
| * 5210 MHz [42] (20.0 dBm) | |
| * 5220 MHz [44] (20.0 dBm) | |
| * 5230 MHz [46] (20.0 dBm) | |
| * 5240 MHz [48] (20.0 dBm) | |
| * 5260 MHz [52] (20.0 dBm) (radar detection) | |
| * 5280 MHz [56] (20.0 dBm) (radar detection) | |
| * 5300 MHz [60] (20.0 dBm) (radar detection) | |
| * 5320 MHz [64] (20.0 dBm) (radar detection) | |
| * 5500 MHz [100] (20.0 dBm) (radar detection) | |
| * 5520 MHz [104] (20.0 dBm) (radar detection) | |
| * 5540 MHz [108] (20.0 dBm) (radar detection) | |
| * 5560 MHz [112] (20.0 dBm) (radar detection) | |
| * 5580 MHz [116] (20.0 dBm) (radar detection) | |
| * 5600 MHz [120] (20.0 dBm) (radar detection) | |
| * 5620 MHz [124] (20.0 dBm) (radar detection) | |
| * 5640 MHz [128] (20.0 dBm) (radar detection) | |
| * 5660 MHz [132] (20.0 dBm) (radar detection) | |
| * 5680 MHz [136] (20.0 dBm) (radar detection) | |
| * 5700 MHz [140] (20.0 dBm) (radar detection) | |
| * 5720 MHz [144] (20.0 dBm) (radar detection) | |
| * 5745 MHz [149] (20.0 dBm) | |
| * 5765 MHz [153] (20.0 dBm) | |
| * 5785 MHz [157] (20.0 dBm) | |
| * 5805 MHz [161] (20.0 dBm) | |
| * 5825 MHz [165] (20.0 dBm) | |
| Supported commands: | |
| * new_interface | |
| * set_interface | |
| * new_key | |
| * start_ap | |
| * join_ibss | |
| * set_pmksa | |
| * del_pmksa | |
| * flush_pmksa | |
| * remain_on_channel | |
| * frame | |
| * set_wiphy_netns | |
| * set_channel | |
| * start_p2p_device | |
| * connect | |
| * disconnect | |
| * crit_protocol_start | |
| * crit_protocol_stop | |
| * update_connect_params | |
| Supported TX frame types: | |
| * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 | |
| Supported RX frame types: | |
| * managed: 0x40 0xd0 | |
| * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * P2P-client: 0x40 0xd0 | |
| * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 | |
| * P2P-device: 0x40 0xd0 | |
| WoWLAN support: | |
| * wake up on disconnect | |
| * wake up on magic packet | |
| * wake up on pattern match, up to 8 patterns of 1-128 bytes, | |
| maximum packet offset 1500 bytes | |
| software interface modes (can always be added): | |
| valid interface combinations: | |
| * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1, | |
| total <= 3, #channels <= 1 | |
| * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1, | |
| total <= 4, #channels <= 1 | |
| * #{ AP } <= 4, | |
| total <= 4, #channels <= 1, STA/AP BI must match | |
| Device supports scan flush. |
@archont94
Hello.
Thanks for the answer.
I am using the Debian distribution.
Even if the patch is accepted into the official kernel, it will be several years before the changes get into Debian.
Is it possible to build brcmfmac.ko with a patch via DKMS?
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Thanks for the update. I also ended up with a revision 3 card that does not seem to get picked up.
Searching for device id
14e4:43c3seems to bring up info about ASUS PCE-AC88 which has similar specs and supposedly usesBCM4366. Thus using the driver for that is worth a shot.