I use a cheap Tapo C100 webcam to monitor my 3D prints. It supports RTSP.
- Go to the Cameras section at https://connect.prusa3d.com
- Add a new camera.
- Click the QR code link
- Click "Start Camera"
I use a cheap Tapo C100 webcam to monitor my 3D prints. It supports RTSP.
This code is usable only if you are on Home Assistant 0.114 or older
For Home Assistant 0.115 and newer please go to: https://github.com/AdamNaj/ZWaveGraphHA
TODO : | |
- manage user notification ; notify-send not really working ; current alternative either. | |
- display hostid used to customize usb backup script. | |
INSTALL | |
- copy usb-auto-backup script to /usr/local/bin, | |
- create an partition on an USB drive named "backup" ; get id (/dev/sddX) -> will be needed in udev.rules | |
- identity your drive information for UDEV-rules using : udevadm info -a -p $(udevadm info -q path -n /dev/sdXX) | |
- create an UDEV rule : /etc/udev/rules.d/99-usb-auto-backup.rules like this one : |