BPI-R2 FreeBSD boot
---<<BOOT>>--- | |
ARM Debug Architecture v7.1 | |
4 watchpoints and 6 breakpoints supported | |
KDB: debugger backends: ddb | |
KDB: current backend: ddb | |
CPU(0) applied BP hardening: not necessary | |
Copyright (c) 1992-2019 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 13.0-CURRENT #456 r350322M: Wed Jul 31 12:30:11 EEST 2019 | |
root@bee:/usr/obj/usr/home/ray/work/FreeBSD/base/head/arm.armv7/sys/BPI-R2 arm | |
FreeBSD clang version 8.0.1 (branches/release_80 364487) (based on LLVM 8.0.1) | |
WARNING: WITNESS option enabled, expect reduced performance. | |
Preloaded elf kernel "kernel" at 0xc07e977c. | |
CPU: ARM Cortex-A7 r0p3 (ECO: 0x00000000) | |
CPU Features: | |
Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7, | |
PXN, LPAE, Coherent Walk | |
Optional instructions: | |
SDIV/UDIV, UMULL, SMULL, SIMD(ext) | |
LoUU:2 LoC:3 LoUIS:2 | |
Cache level 1: | |
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc | |
32KB/32B 2-way instruction cache Read-Alloc | |
Cache level 2: | |
256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc | |
real memory = 1879048192 (1792 MB) | |
avail memory = 1827651584 (1742 MB) | |
Physical memory chunk(s): | |
0x80000000 - 0xefffffff, 1792 MB ( 458752 pages) | |
Excluded memory regions: | |
0xc0000000 - 0xc0953fff, 9 MB ( 2388 pages) NoAlloc | |
Static device mappings: | |
0x10000000 - 0x1fffffff mapped at VA 0xeff00000 | |
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs | |
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. | |
VIMAGE (virtualized network stack) enabled | |
ULE: setup cpu 0 | |
ULE: setup cpu 1 | |
ULE: setup cpu 2 | |
ULE: setup cpu 3 | |
random: entropy device external interface | |
mem: <memory> | |
null: <full device, null device, zero device> | |
openfirm: <Open Firmware control device> | |
nfslock: pseudo-device | |
crypto: <crypto core> | |
ofwbus0: <Open Firmware Device Tree> | |
clk_fixed0: <Fixed clock> on ofwbus0 | |
clk_fixed1: <Fixed clock> on ofwbus0 | |
clk_fixed2: <Fixed clock> on ofwbus0 | |
regfix0: <Fixed Regulator> on ofwbus0 | |
regfix1: <Fixed Regulator> on ofwbus0 | |
regfix2: <Fixed Regulator> on ofwbus0 | |
gic0: <ARM Generic Interrupt Controller> mem 0x10211000-0x10211fff,0x10212000-0x10213fff,0x10214000-0x10215fff,0x10216000-0x10217fff on ofwbus0 | |
ofwbus0: no default resources for rid = 0, type = 1 | |
gic0: pn 0x1, arch 0x2, rev 0x0, implementer 0x43b irqs 256 | |
mt7623_sysirq0 mem 0x10200100-0x1020011b on ofwbus0 | |
mt_gpt0: <Mediatek MT7623 General-Purpose Timer> mem 0x10008000-0x1000807f irq 10 on ofwbus0 | |
Event timer "MTGPT" frequency 13000000 Hz quality 800 | |
Timecounter "MT7623 General-Purpose Timer" frequency 13000000 Hz quality 1000 | |
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0 | |
Timecounter "ARM MPCore Timecounter" frequency 13000000 Hz quality 1000 | |
Event timer "ARM MPCore Eventtimer" frequency 13000000 Hz quality 1000 | |
ofwbus0: <opp-table> compat operating-points-v2 (no driver attached) | |
cpulist0: <Open Firmware CPU Group> on ofwbus0 | |
cpu0: <Open Firmware CPU> on cpulist0 | |
cpu0: Nominal frequency 1300Mhz | |
cpu1: <Open Firmware CPU> on cpulist0 | |
cpu1: Nominal frequency 1300Mhz | |
cpu2: <Open Firmware CPU> on cpulist0 | |
cpu2: Nominal frequency 1300Mhz | |
cpu3: <Open Firmware CPU> on cpulist0 | |
cpu3: Nominal frequency 1300Mhz | |
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0 | |
ofwbus0: <syscon@10000000> mem 0x10000000-0x10000fff compat mediatek,mt7623-topckgen (no driver attached) | |
ofwbus0: <syscon@10001000> mem 0x10001000-0x10001fff compat mediatek,mt7623-infracfg (no driver attached) | |
mt_pericfg0: <Mediatek MT7623 pericfg> mem 0x10003000-0x10003fff on ofwbus0 | |
mt_pericfg0: Devices power doen status: | |
ofwbus0: <pinctrl@10005000> mem 0x1000b000-0x1000bfff irq 8,9 compat mediatek,mt7623-pinctrl (no driver attached) | |
ofwbus0: <syscfg@10005000> mem 0x10005000-0x10005fff compat mediatek,mt7623-pctl-a-syscfg (no driver attached) | |
ofwbus0: <scpsys@10006000> mem 0x10006000-0x10006fff compat mediatek,mt7623-scpsys (no driver attached) | |
mt_wd0: <Mediatek MT7623 Watchdog> mem 0x10007000-0x100070ff on ofwbus0 | |
mt_wd0: WDT_MODE = 0x00000014 | |
mt_wd0: WDT_STA = 0x00000000 | |
ofwbus0: <smi@1000c000> mem 0x1000c000-0x1000cfff compat mediatek,mt7623-smi-common (no driver attached) | |
ofwbus0: <pwrap@1000d000> mem 0x1000d000-0x1000dfff irq 11 compat mediatek,mt7623-pwrap (no driver attached) | |
ofwbus0: <cir@10013000> mem 0x10013000-0x10013fff irq 12 compat mediatek,mt7623-cir (no driver attached) | |
ofwbus0: <mmsys_iommu@10205000> mem 0x10205000-0x10205fff irq 13 compat mediatek,mt7623-m4u (no driver attached) | |
ofwbus0: <efuse@10206000> mem 0x10206000-0x10206fff compat mediatek,mt7623-efuse (no driver attached) | |
ofwbus0: <syscon@10209000> mem 0x10209000-0x10209fff compat mediatek,mt7623-apmixedsys (no driver attached) | |
ofwbus0: <rng@1020f000> mem 0x1020f000-0x1020ffff compat mediatek,mt7623-rng (no driver attached) | |
ofwbus0: <adc@11001000> mem 0x11001000-0x11001fff compat mediatek,mt7623-auxadc (no driver attached) | |
ofwbus0: no default resources for rid = 0, type = 4 | |
ofwbus0: no default resources for rid = 0, type = 4 | |
ofwbus0: no default resources for rid = 0, type = 4 | |
uart0: <Non-standard ns8250 class UART with FIFOs> mem 0x11002000-0x110023ff irq 14 on ofwbus0 | |
uart0: fast interrupt | |
uart0: PPS capture mode: DCD | |
ofwbus0: no default resources for rid = 0, type = 4 | |
ofwbus0: no default resources for rid = 0, type = 4 | |
ofwbus0: no default resources for rid = 0, type = 4 | |
uart1: <16650 or compatible> mem 0x11003000-0x110033ff irq 15 on ofwbus0 | |
uart1: fast interrupt | |
uart1: PPS capture mode: DCD | |
ofwbus0: no default resources for rid = 0, type = 4 | |
ofwbus0: no default resources for rid = 0, type = 4 | |
ofwbus0: no default resources for rid = 0, type = 4 | |
uart2: <16650 or compatible> mem 0x11004000-0x110043ff irq 16 on ofwbus0 | |
uart2: console (116071,n,8,1) | |
uart2: fast interrupt | |
uart2: PPS capture mode: DCD | |
ofwbus0: <serial@11005000> mem 0x11005000-0x110053ff irq 17 disabled compat mediatek,mt7623-uart (no driver attached) | |
ofwbus0: <pwm@11006000> mem 0x11006000-0x11006fff compat mediatek,mt7623-pwm (no driver attached) | |
ofwbus0: <i2c@11007000> mem 0x11007000-0x1100706f,0x11000200-0x1100027f irq 18 compat mediatek,mt7623-i2c (no driver attached) | |
ofwbus0: <i2c@11008000> mem 0x11008000-0x1100806f,0x11000280-0x110002ff irq 19 compat mediatek,mt7623-i2c (no driver attached) | |
ofwbus0: <i2c@11009000> mem 0x11009000-0x1100906f,0x11000300-0x1100037f irq 20 disabled compat mediatek,mt7623-i2c (no driver attached) | |
ofwbus0: <spi@1100a000> mem 0x1100a000-0x1100a0ff irq 21 compat mediatek,mt7623-spi (no driver attached) | |
ofwbus0: <thermal@1100b000> mem 0x1100b000-0x1100bfff irq 22 compat mediatek,mt7623-thermal (no driver attached) | |
ofwbus0: <serial@1100c000> mem 0x1100c000-0x1100cfff irq 23 compat mediatek,mt7623-btif (no driver attached) | |
ofwbus0: <nfi@1100d000> mem 0x1100d000-0x1100dfff irq 24 disabled compat mediatek,mt7623-nfc (no driver attached) | |
ofwbus0: <ecc@1100e000> mem 0x1100e000-0x1100efff irq 25 disabled compat mediatek,mt7623-ecc (no driver attached) | |
ofwbus0: <spi@11014000> mem 0x11014000-0x11014fff disabled compat mediatek,mt7623-nor (no driver attached) | |
ofwbus0: <spi@11016000> mem 0x11016000-0x110160ff irq 26 disabled compat mediatek,mt7623-spi (no driver attached) | |
ofwbus0: <spi@11017000> mem 0x11017000-0x11017fff irq 27 disabled compat mediatek,mt7623-spi (no driver attached) | |
ofwbus0: <clock-controller@11220000> mem 0x11220000-0x11221fff compat mediatek,mt7623-audsys (no driver attached) | |
ofwbus0: <mmc@11230000> mem 0x11230000-0x11230fff irq 28 compat mediatek,mt7623-mmc (no driver attached) | |
ofwbus0: <mmc@11240000> mem 0x11240000-0x11240fff irq 29 compat mediatek,mt7623-mmc (no driver attached) | |
ofwbus0: <syscon@13000000> mem 0x13000000-0x130001ff compat mediatek,mt7623-g3dsys (no driver attached) | |
ofwbus0: <syscon@14000000> mem 0x14000000-0x14000fff compat mediatek,mt7623-mmsys (no driver attached) | |
ofwbus0: <larb@14010000> mem 0x14010000-0x14010fff compat mediatek,mt7623-smi-larb (no driver attached) | |
ofwbus0: <syscon@15000000> mem 0x15000000-0x15000fff compat mediatek,mt7623-imgsys (no driver attached) | |
ofwbus0: <larb@15001000> mem 0x15001000-0x15001fff compat mediatek,mt7623-smi-larb (no driver attached) | |
ofwbus0: <jpegdec@15004000> mem 0x15004000-0x15004fff irq 30 compat mediatek,mt7623-jpgdec (no driver attached) | |
ofwbus0: <syscon@16000000> mem 0x16000000-0x16000fff compat mediatek,mt7623-vdecsys (no driver attached) | |
ofwbus0: <larb@16010000> mem 0x16010000-0x16010fff compat mediatek,mt7623-smi-larb (no driver attached) | |
mt_hifsys0: <Mediatek MT7623 HIFSYS module> mem 0x1a000000-0x1a000fff on ofwbus0 | |
mt_hifsys0: ID MT7623 rev 0 | |
mt_hifsys0: Status: | |
PCI-E 2 in reset | |
pcib0: <MTK PCIe Controller> mem 0x1a140000-0x1a140fff,0x1a142000-0x1a142fff,0x1a143000-0x1a143fff,0x1a144000-0x1a144fff on ofwbus0 | |
pci0: <PCI bus> on pcib0 | |
pci0: domain=0, physical bus=0 | |
found-> vendor=0x14c3, dev=0x0801, revid=0x01 | |
domain=0, bus=0, slot=0, func=0 | |
class=06-04-00, hdrtype=0x01, mfdev=0 | |
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=255 | |
powerspec 3 supports D0 D1 D3 current D0 | |
map[10]: type Memory, range 32, base 0x80000000, size 31, enabled | |
secbus=1, subbus=1 | |
found-> vendor=0x14c3, dev=0x0801, revid=0x01 | |
domain=0, bus=0, slot=1, func=0 | |
class=06-04-00, hdrtype=0x01, mfdev=0 | |
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=255 | |
powerspec 3 supports D0 D1 D3 current D0 | |
map[10]: type Memory, range 32, base 0x80000000, size 31, enabled | |
secbus=2, subbus=2 | |
pcib1: <PCI-PCI bridge> at device 0.0 on pci0 | |
pcib1: domain 0 | |
pcib1: secondary bus 1 | |
pcib1: subordinate bus 1 | |
pci1: <PCI bus> on pcib1 | |
pcib1: allocated bus range (1-1) for rid 0 of pci1 | |
pci1: domain=0, physical bus=1 | |
found-> vendor=0x168c, dev=0x0034, revid=0x01 | |
domain=0, bus=1, slot=0, func=0 | |
class=02-80-00, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=255 | |
powerspec 3 supports D0 D1 D3 current D0 | |
MSI supports 4 messages, 64 bit, vector masks | |
map[10]: type Memory, range 64, base 0x60100000, size 19, enabled | |
pcib1: allocated initial memory window of 0x60100000-0x601fffff | |
pcib1: allocated memory range (0x60100000-0x6017ffff) for rid 10 of pci0:1:0:0 | |
pci1: <network> at device 0.0 (no driver attached) | |
pcib2: <PCI-PCI bridge> at device 1.0 on pci0 | |
pcib2: domain 0 | |
pcib2: secondary bus 2 | |
pcib2: subordinate bus 2 | |
pci2: <PCI bus> on pcib2 | |
pcib2: allocated bus range (2-2) for rid 0 of pci2 | |
pci2: domain=0, physical bus=2 | |
found-> vendor=0x1b21, dev=0x0611, revid=0x02 | |
domain=0, bus=2, slot=0, func=0 | |
class=01-01-85, hdrtype=0x00, mfdev=0 | |
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) | |
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | |
intpin=a, irq=0 | |
powerspec 3 supports D0 D3 current D0 | |
MSI supports 1 message | |
map[10]: type I/O Port, range 32, base 0x1a160000, size 3, enabled | |
pcib2: allocated initial I/O port window of 0x1a160000-0x1a160fff | |
pcib2: allocated I/O port range (0x1a160000-0x1a160007) for rid 10 of pci0:2:0:0 | |
map[14]: type I/O Port, range 32, base 0x1a160008, size 2, enabled | |
pcib2: allocated I/O port range (0x1a160008-0x1a16000b) for rid 14 of pci0:2:0:0 | |
map[18]: type I/O Port, range 32, base 0x1a160010, size 3, enabled | |
pcib2: allocated I/O port range (0x1a160010-0x1a160017) for rid 18 of pci0:2:0:0 | |
map[1c]: type I/O Port, range 32, base 0x1a160018, size 2, enabled | |
pcib2: allocated I/O port range (0x1a160018-0x1a16001b) for rid 1c of pci0:2:0:0 | |
map[20]: type I/O Port, range 32, base 0x1a160020, size 4, enabled | |
pcib2: allocated I/O port range (0x1a160020-0x1a16002f) for rid 20 of pci0:2:0:0 | |
map[24]: type Memory, range 32, base 0x60300000, size 9, enabled | |
pcib2: allocated initial memory window of 0x60300000-0x603fffff | |
pcib2: allocated memory range (0x60300000-0x603001ff) for rid 24 of pci0:2:0:0 | |
pcib2: slot 0 INTA is routed to irq 42 | |
ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0x1a160000-0x1a160007,0x1a160008-0x1a16000b,0x1a160010-0x1a160017,0x1a160018-0x1a16001b,0x1a160020-0x1a16002f mem 0x60300000-0x603001ff irq 42 at device 0.0 on pci2 | |
ahci0: attempting to allocate 1 MSI vectors (1 supported) | |
ahci0: Failed to allocate MSI/MSI-x, falling back to INTx | |
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported | |
ahci0: quirks=0xc00000<NOCCS,NOAUX> | |
ahci0: Caps: 64bit NCQ SNTF SS AL CLO 6Gbps PM PMD SSC PSC 32cmd CCC eSATA 2ports | |
ahci0: Caps2: | |
ahcich0: <AHCI channel> at channel 0 on ahci0 | |
ahcich0: Caps: HPCP | |
ahcich1: <AHCI channel> at channel 1 on ahci0 | |
ahcich1: Caps: HPCP | |
ofwbus0: <pcie-phy@1a149000> mem 0x1a149000-0x1a1496ff compat mediatek,generic-tphy-v1 (no driver attached) | |
ofwbus0: <pcie-phy@1a14a000> mem 0x1a14a000-0x1a14a6ff compat mediatek,generic-tphy-v1 (no driver attached) | |
xhci0: <Mediatek MT7623 USB 3.0 controller> mem 0x1a1c0000-0x1a1c0fff,0x1a1c4700-0x1a1c47ff irq 31 on ofwbus0 | |
xhci0: Controller has 1 USB3 ports, 1 USB2 ports | |
xhci0: CAPLENGTH = 0x960020 | |
xhci0: 32 bytes context size, 32-bit DMA | |
xhci0: Starting controller | |
xhci0: Controller started | |
usbus0 on xhci0 | |
xhci0: usbpf: Attached | |
mt_usbphy0: <Mediatek MT7623 USB 2.0/3.0 PHY> mem 0x1a1c4000-0x1a1c46ff on ofwbus0 | |
u2res: bsh 0xfa0c4800, sz: 0x100 | |
mt_usbphy0: Child device res sz: 0x100 | |
u3res: bsh 0xfa0c4900, sz: 0x700 | |
mt_usbphy0: Child device res sz: 0x700 | |
mt_usbphy0: phy:0, fm_out:0, calib:4 | |
xhci1: <Mediatek MT7623 USB 3.0 controller> mem 0x1a240000-0x1a240fff,0x1a244700-0x1a2447ff irq 32 on ofwbus0 | |
xhci1: Controller has 1 USB3 ports, 1 USB2 ports | |
xhci1: CAPLENGTH = 0x960020 | |
xhci1: 32 bytes context size, 32-bit DMA | |
xhci1: Starting controller | |
xhci1: Controller started | |
usbus1 on xhci1 | |
xhci1: usbpf: Attached | |
mt_usbphy1: <Mediatek MT7623 USB 2.0/3.0 PHY> mem 0x1a244000-0x1a2446ff on ofwbus0 | |
u2res: bsh 0xfa144800, sz: 0x100 | |
mt_usbphy1: Child device res sz: 0x100 | |
u3res: bsh 0xfa144900, sz: 0x700 | |
mt_usbphy1: Child device res sz: 0x700 | |
mt_usbphy1: phy:0, fm_out:0, calib:4 | |
mt_ethsys0: <Mediatek MT7623 ETHSYS module> mem 0x1b000000-0x1b000fff on ofwbus0 | |
mt_ethsys0: ID MT7623 rev 0 | |
ofwbus0: <dma-controller@1b007000> mem 0x1b007000-0x1b007fff irq 33 compat mediatek,mt7623-hsdma (no driver attached) | |
rt0: <Mediatek MT7623 Ethernet driver> mem 0x1b100000-0x1b11ffff irq 34,35,36 on ofwbus0 | |
rt0: use hardcoded 00:18:e7:d5:83:90 macaddr | |
rt0: bpf attached | |
rt0: Ethernet address: 00:18:e7:d5:83:90 | |
rt0: use hardcoded 00:18:e7:d5:83:90 macaddr | |
rt1: bpf attached | |
rt1: Ethernet address: 00:18:e7:d5:83:91 | |
ofwbus0: <crypto@1b240000> mem 0x1b240000-0x1b25ffff irq 37,38,39,40,41 compat mediatek,eip97-crypto (no driver attached) | |
ofwbus0: <syscon@1c000000> mem 0x1c000000-0x1c000fff compat mediatek,mt7623-bdpsys (no driver attached) | |
ofwbus0: <gpio-keys> compat gpio-keys (no driver attached) | |
gpioled0: <GPIO LEDs> on ofwbus0 | |
gpioled0: <bpi-r2:pio:blue> failed to map pin | |
gpioled0: <bpi-r2:pio:green> failed to map pin | |
gpioled0: <bpi-r2:pio:red> failed to map pin | |
cryptosoft0: <software crypto> | |
crypto: assign cryptosoft0 driver id 0, flags 0x6000000 | |
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0 | |
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 | |
procfs registered | |
Timecounters tick every 1.000 msec | |
lo0: bpf attached | |
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384 | |
IPsec: Initialized Security Association Processing. | |
usbus0: 5.0Gbps Super Speed USB v3.0 | |
usbus1: 5.0Gbps Super Speed USB v3.0 | |
ahcich0: AHCI reset... | |
ugen0.1: <Mediatek XHCI root HUB> at usbus0 | |
uhub0 on usbus0 | |
uhub0: <Mediatek XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 | |
ugen1.1: <Mediatek XHCI root HUB> at usbus1 | |
uhub1 on usbus1 | |
uhub1: <Mediatek XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 | |
ahcich0: SATA connect timeout time=10000us status=00000000 | |
ahcich0: AHCI reset: device not found | |
ahcich1: AHCI reset... | |
ahcich1: SATA connect time=100us status=00000133 | |
ahcich1: AHCI reset: device found | |
ahcich1: AHCI reset: device ready after 0ms | |
pass0 at ahcich1 bus 0 scbus1 target 0 lun 0 | |
pass0: <KINGSTON SA400S37240G SBFK61K1> ACS-3 ATA SATA 3.x device | |
pass0: Serial Number 50026B7380334C87 | |
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) | |
pass0: Command Queueing enabled | |
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 | |
ada0: <KINGSTON SA400S37240G SBFK61K1> ACS-3 ATA SATA 3.x device | |
ada0: Serial Number 50026B7380334C87 | |
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) | |
ada0: Command Queueing enabled | |
ada0: 228936MB (468862128 512 byte sectors) | |
Release APs | |
CPU(2) applied BP hardening: not necessary | |
CPU(1) applied BP hardening: not necessary | |
CPU(3) applied BP hardening: not necessary | |
GEOM: new disk ada0 | |
Root mount waiting for: usbus1 usbus0 | |
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> ARMV7/4/32/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA> | |
WARNING: WITNESS option enabled, expect reduced performance. | |
uhub0: 2 ports with 2 removable, self powered | |
uhub1: 2 ports with 2 removable, self powered | |
Loader variables: | |
Manual root filesystem specification: | |
<fstype>:<device> [options] | |
Mount <device> using filesystem <fstype> | |
and with the specified (optional) option list. | |
eg. ufs:/dev/da0s1a | |
zfs:zroot/ROOT/default | |
cd9660:/dev/cd0 ro | |
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) | |
? List valid disk boot devices | |
. Yield 1 second (for background tasks) | |
<empty line> Abort manual input | |
mountroot> ufs:diskid/DISK-50026B7380334C87p2 | |
Trying to mount root from ufs:diskid/DISK-50026B7380334C87p2 []... | |
Warning: no time-of-day clock registered, system time will not be set accurately | |
start_init: trying /sbin/init | |
Enter full pathname of shell or RETURN for /bin/sh: | |
random: unblocking device. | |
# ^DSetting hostuuid: b492a498-5a10-11e6-93f2-34e6d70de7b9. | |
Setting hostid: 0x498cbc2b. | |
warning: total configured swap (935927 pages) exceeds maximum recommended amount (893860 pages). | |
warning: increase kern.maxswzone or reduce amount of swap. | |
Fast boot: skipping disk checks. | |
Mounting local filesystems:. | |
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/perl5/5.28/mach/CORE | |
Soft Float compatibility ldconfig path: | |
Setting hostname: bpi-r2. | |
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED | |
Feeding entropy: . | |
lo0: link state changed to UP | |
Starting Network: lo0 rt0 rt1. | |
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 | |
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> | |
inet6 ::1 prefixlen 128 | |
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 | |
inet 127.0.0.1 netmask 0xff000000 | |
groups: lo | |
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> | |
rt0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
options=8<VLAN_MTU> | |
ether 00:18:e7:d5:83:90 | |
media: Ethernet 100baseTX <full-duplex> | |
status: active | |
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> | |
rt1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
options=8<VLAN_MTU> | |
ether 00:18:e7:d5:83:91 | |
media: Ethernet 100baseTX <full-duplex> | |
status: active | |
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> | |
Starting devd. | |
Starting Network: rt0. | |
rt0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
options=8<VLAN_MTU> | |
ether 00:18:e7:d5:83:90 | |
media: Ethernet 100baseTX <full-duplex> | |
status: active | |
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> | |
sh: /usr/libexec/hyperv/hyperv_vfattach: not found | |
Starting Network: rt1. | |
rt1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 | |
options=8<VLAN_MTU> | |
ether 00:18:e7:d5:83:91 | |
media: Ethernet 100baseTX <full-duplex> | |
status: active | |
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> | |
sh: /usr/libexec/hyperv/hyperv_vfattach: not found | |
add host 127.0.0.1: gateway lo0 fib 0: route already in table | |
add host ::1: gateway lo0 fib 0: route already in table | |
add net fe80::: gateway ::1 | |
add net ff02::: gateway ::1 | |
add net ::ffff:0.0.0.0: gateway ::1 | |
add net ::0.0.0.0: gateway ::1 | |
Creating and/or trimming log files. | |
Starting syslogd. | |
Clearing /tmp. | |
Updating motd:. | |
Mounting late filesystems:. | |
Performing sanity check on sshd configuration. | |
Starting sshd. | |
Starting sendmail_submit. | |
Starting sendmail_msp_queue. | |
Starting cron. | |
Starting background file system checks in 60 seconds. | |
Mon Jul 29 02:05:59 EEST 2019 | |
FreeBSD/arm (bpi-r2) (ttyu2) | |
login: root | |
Password: | |
Jul 29 02:06:04 bpi-r2 login[1053]: ROOT LOGIN (root) ON ttyu2 | |
Last login: Mon Jul 29 02:02:49 on ttyu2 | |
FreeBSD 13.0-CURRENT (BPI-R2) #456 r350322M: Wed Jul 31 12:30:11 EEST 2019 | |
Welcome to FreeBSD! | |
Release Notes, Errata: https://www.FreeBSD.org/releases/ | |
Security Advisories: https://www.FreeBSD.org/security/ | |
FreeBSD Handbook: https://www.FreeBSD.org/handbook/ | |
FreeBSD FAQ: https://www.FreeBSD.org/faq/ | |
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/ | |
FreeBSD Forums: https://forums.FreeBSD.org/ | |
Documents installed with the system are in the /usr/local/share/doc/freebsd/ | |
directory, or can be installed later with: pkg install en-freebsd-doc | |
For other languages, replace "en" with a language code like de or fr. | |
Show the version of FreeBSD installed: freebsd-version ; uname -a | |
Please include that output and any error messages when posting questions. | |
Introduction to manual pages: man man | |
FreeBSD directory layout: man hier | |
Edit /etc/motd to change this login announcement. | |
# ps axu | |
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND | |
root 10 387.8 0.0 0 32 - RNL 02:05 1:57.29 [idle] | |
root 1054 1.6 0.2 6568 3716 u2 S 02:06 0:00.08 -csh (csh) | |
root 998 1.4 0.3 9252 5912 - Ss 02:05 0:00.04 sendmail: accepting connections (sendmail) | |
root 1053 1.0 0.2 5516 2916 u2 Ss 02:05 0:00.13 login [pam] (login) | |
root 808 0.7 0.1 4952 2452 - Ss 02:05 0:00.06 /usr/sbin/syslogd -ss | |
root 11 0.1 0.0 0 128 - WL 02:05 0:00.20 [intr] | |
root 0 0.0 0.0 0 112 - DLs 02:05 0:00.12 [kernel] | |
root 1 0.0 0.1 3692 996 - SLs 02:05 0:01.53 /sbin/init -s | |
root 2 0.0 0.0 0 8 - DL 02:05 0:00.00 [crypto] | |
root 3 0.0 0.0 0 8 - DL 02:05 0:00.00 [crypto returns 0] | |
root 4 0.0 0.0 0 8 - DL 02:05 0:00.00 [crypto returns 1] | |
root 5 0.0 0.0 0 8 - DL 02:05 0:00.00 [crypto returns 2] | |
root 6 0.0 0.0 0 8 - DL 02:05 0:00.00 [crypto returns 3] | |
root 7 0.0 0.0 0 16 - DL 02:05 0:00.04 [cam] | |
root 8 0.0 0.0 0 8 - DL 02:05 0:00.00 [sctp_iterator] | |
root 9 0.0 0.0 0 8 - DL 02:05 0:00.01 [rand_harvestq] | |
root 12 0.0 0.0 0 24 - DL 02:05 0:00.18 [geom] | |
root 13 0.0 0.0 0 80 - DL 02:05 0:00.02 [usb] | |
root 14 0.0 0.0 0 8 - DL 02:05 0:00.00 [soaiod1] | |
root 15 0.0 0.0 0 8 - DL 02:05 0:00.00 [soaiod2] | |
root 16 0.0 0.0 0 8 - DL 02:05 0:00.00 [soaiod3] | |
root 17 0.0 0.0 0 8 - DL 02:05 0:00.00 [soaiod4] | |
root 18 0.0 0.0 0 24 - DL 02:05 0:00.02 [pagedaemon] | |
root 19 0.0 0.0 0 8 - DL 02:05 0:00.00 [vmdaemon] | |
root 20 0.0 0.0 0 24 - DL 02:05 0:00.01 [bufdaemon] | |
root 21 0.0 0.0 0 8 - DL 02:05 0:00.00 [vnlru] | |
root 22 0.0 0.0 0 8 - DL 02:05 0:00.00 [syncer] | |
root 737 0.0 0.1 4012 1260 - Ss 02:05 0:00.00 /sbin/devd | |
root 995 0.0 0.4 11516 6568 - Ss 02:05 0:00.01 /usr/sbin/sshd | |
smmsp 1001 0.0 0.3 8912 5796 - Ss 02:05 0:00.01 sendmail: Queue runner@00:30:00 for /var/spool/clientmqueue (sendmail) | |
root 1005 0.0 0.1 4940 2432 - Ss 02:05 0:00.02 /usr/sbin/cron -s | |
root 1049 0.0 0.1 5668 2540 u2- S 02:05 0:00.00 sh /etc/rc | |
root 1050 0.0 0.1 4448 2100 u2- S 02:05 0:00.02 logger -p daemon.notice -t fsck | |
root 1051 0.0 0.1 4268 1936 u2- SC 02:05 0:00.01 sleep 60 | |
root 1056 0.0 0.1 5080 2512 u2 R+ 02:06 0:00.01 ps axu | |
# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment