-
-
Save rayddteam/585949423ba0ca1aec5b89f87fbd05cd to your computer and use it in GitHub Desktop.
Asus RT-AC58U (IPQ4018 based) bootlog
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Format: Log Type - Time(microsec) - Message - Optional Info | |
| Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |
| S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00096 | |
| S - IMAGE_VARIANT_STRING=DAABANAZA | |
| S - OEM_IMAGE_VERSION_STRING=CRM | |
| S - Boot Config, 0x00000021 | |
| S - Core 0 Frequency, 0 MHz | |
| B - 261 - PBL, Start | |
| B - 1339 - bootable_media_detect_entry, Start | |
| B - 1679 - bootable_media_detect_success, Start | |
| B - 1693 - elf_loader_entry, Start | |
| B - 5076 - auth_hash_seg_entry, Start | |
| B - 7223 - auth_hash_seg_exit, Start | |
| B - 573340 - elf_segs_hash_verify_entry, Start | |
| B - 688861 - PBL, End | |
| B - 688886 - SBL1, Start | |
| B - 777252 - pm_device_init, Start | |
| D - 6 - pm_device_init, Delta | |
| B - 778765 - boot_flash_init, Start | |
| D - 54322 - boot_flash_init, Delta | |
| B - 837276 - boot_config_data_table_init, Start | |
| D - 3853 - boot_config_data_table_init, Delta - (419 Bytes) | |
| B - 844510 - clock_init, Start | |
| D - 7565 - clock_init, Delta | |
| B - 856489 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:1,Subtype:0 | |
| B - 859977 - sbl1_ddr_set_params, Start | |
| B - 864964 - cpr_init, Start | |
| D - 2 - cpr_init, Delta | |
| B - 869455 - Pre_DDR_clock_init, Start | |
| D - 4 - Pre_DDR_clock_init, Delta | |
| D - 13146 - sbl1_ddr_set_params, Delta | |
| B - 883156 - pm_driver_init, Start | |
| D - 2 - pm_driver_init, Delta | |
| B - 953349 - sbl1_wait_for_ddr_training, Start | |
| D - 29 - sbl1_wait_for_ddr_training, Delta | |
| B - 968648 - Image Load, Start | |
| D - 134896 - QSEE Image Loaded, Delta - (262104 Bytes) | |
| B - 1104042 - Image Load, Start | |
| D - 1442 - SEC Image Loaded, Delta - (2048 Bytes) | |
| B - 1114406 - Image Load, Start | |
| D - 223360 - APPSBL Image Loaded, Delta - (457299 Bytes) | |
| B - 1338187 - QSEE Execution, Start | |
| D - 59 - QSEE Execution, Delta | |
| B - 1344382 - SBL1, End | |
| D - 657606 - SBL1, Delta | |
| S - Flash Throughput, 2007 KB/s (721870 Bytes, 359572 us) | |
| S - DDR Frequency, 537 MHz | |
| U-Boot 2012.07-05763-g80e4eb4 [local,local] (Jul 06 2016 - 11:01:57) | |
| RT-AC58U bootloader version: 1.0.0.3 | |
| smem ram ptable found: ver: 1 len: 3 | |
| ASUS RT-AC58U gpio init : wps / reset pin | |
| DRAM: 128 MiB | |
| machid : 0x8010100 | |
| Maximum malloc length: 4096 KBytes | |
| mem_malloc_start/brk/end: 0x86ef0000/86ef0000/87300000 | |
| Relocation offset: 0 | |
| NAND: spi_nand: spi_nand_flash_probe SF NAND ID 0:ef:aa:21 | |
| SF: Detected W25N01GV with page size 2 KiB, total 128 MiB | |
| SF: Detected MX25L1605D with page size 4 KiB, total 2 MiB | |
| ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000 | |
| 130 MiB | |
| *** Warning - bad CRC, using default environment | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| name : offset size | |
| 0:SBL1 : 00000000 00040000 | |
| 0:MIBIB : 00040000 00020000 | |
| 0:QSEE : 00060000 00060000 | |
| 0:CDT : 000c0000 00010000 | |
| 0:DDRPARAMS : 000d0000 00010000 | |
| 0:APPSBLENV : 000e0000 00010000 | |
| 0:APPSBL : 000f0000 00080000 | |
| 0:ART : 00170000 00010000 | |
| machid: 8010100 | |
| Net: MAC0 addr:0:3:7f:ba:db:ad | |
| PHY ID1: 0x4d | |
| PHY ID2: 0xd0b1 | |
| ipq40xx_ess_sw_init done | |
| eth0 | |
| Creating 1 MTD partitions on "nand1": | |
| 0x00000000-0x08000000 : "mtd=0" | |
| UBI: attaching mtd2 to ubi0 | |
| UBI: physical eraseblock size: 131072 bytes (128 KiB) | |
| UBI: logical eraseblock size: 126976 bytes | |
| UBI: smallest flash I/O unit: 2048 | |
| UBI: VID header offset: 2048 (aligned 2048) | |
| UBI: data offset: 4096 | |
| UBI: max. sequence number: 150 | |
| UBI: attached mtd2 to ubi0 | |
| UBI: MTD device name: "mtd=0" | |
| UBI: MTD device size: 128 MiB | |
| UBI: number of good PEBs: 1024 | |
| UBI: number of bad PEBs: 0 | |
| UBI: number of corrupted PEBs: 0 | |
| UBI: max. allowed volumes: 128 | |
| UBI: wear-leveling threshold: 4096 | |
| UBI: number of internal volumes: 1 | |
| UBI: number of user volumes: 6 | |
| UBI: available PEBs: 30 | |
| UBI: total number of reserved PEBs: 994 | |
| UBI: number of PEBs reserved for bad PEB handling: 10 | |
| UBI: max/mean erase counter: 19/0 | |
| UBI: image sequence number: 1543254291 | |
| UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name | |
| UBI: 0 3 1 0 dynamic 1f000 3 5d000 1f000 0 0 5 nvram | |
| UBI: 1 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 7 Factory | |
| UBI: 2 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 8 Factory2 | |
| UBI: 3 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 5 linux | |
| UBI: 4 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 6 linux2 | |
| UBI: 5 b5 1 0 dynamic 1f000 b5 15eb000 1f000 0 0 5 jffs2 | |
| UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume | |
| Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ec0ce8 | |
| EEPROM set 0: OK (version 20) | |
| Read 0x1f000 bytes from volume [Factory2] offset 0x0 to 86ec0ce8 | |
| EEPROM set 1: OK (version 20) | |
| Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ef3480 | |
| Select EEPROM set 0 at offset 0x0. | |
| Please choose the operation: | |
| 1: Load System code to SDRAM via TFTP. | |
| 2: Load System code then write to Flash via TFTP. | |
| 3: Boot System code via Flash (default). | |
| 4: Entr boot command line interface. | |
| 7: Load Boot Loader code then write to Flash via Serial. | |
| 9: Load Boot Loader code then write to Flash via TFTP. | |
| 1 0 | |
| 3: Boot System code via Flash (default). | |
| RT-AC58U bootloader version: 1.0.0.3 | |
| MAC Address: 70:4D:7B:XX:YY:ZZ | |
| Read 0x40 bytes from volume [linux] offset 0x0 to 84000000 | |
| FIT/FDT format image found at 0x84000000, size 0x0137e0c4 | |
| Read 0x137e104 bytes from volume [linux] offset 0x0 to 84000000 | |
| ## Booting kernel from FIT Image at 84000000 ... | |
| Using 'config@1' configuration | |
| Trying 'kernel@1' kernel subimage | |
| Description: ARM OpenWrt Linux-3.0 | |
| Type: Kernel Image | |
| Compression: lzma compressed | |
| Data Start: 0x840000e0 | |
| Data Size: 2108285 Bytes = 2 MiB | |
| Architecture: ARM | |
| OS: Linux | |
| Load Address: 0x80208000 | |
| Entry Point: 0x80208000 | |
| Hash algo: crc32 | |
| Hash value: 83ab30ca | |
| ## Loading init Ramdisk from FIT Image at 84000000 ... | |
| Using 'config@1' configuration | |
| Trying 'rootfs@1' ramdisk subimage | |
| Description: Root File System | |
| Type: RAMDisk Image | |
| Compression: lzma compressed | |
| Data Start: 0x84202d40 | |
| Data Size: 18296876 Bytes = 17.4 MiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 067579ea | |
| ## Flattened Device Tree from FIT Image at 84000000 | |
| Using 'config@1' configuration | |
| Trying 'fdt@1' FDT blob subimage | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x85375e68 | |
| Data Size: 32582 Bytes = 31.8 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 42070f63 | |
| Hash algo: sha1 | |
| Hash value: ebf2ac0ef3f4d701102cff2b69dd5516c7c84b79 | |
| Booting using the fdt blob at 0x85375e68 | |
| Read 0x28 bytes from volume [linux2] offset 0x0 to 86edfc40 | |
| Uncompressing Kernel Image ... OK | |
| Loading Device Tree to 86ed4000, end 86edef45 ... OK | |
| Using machid 0x8010100 from environment | |
| Starting kernel ... | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.14.43 (barton@localhost.localdomain) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Mon Aug 29 16:29:36 CST 2016 | |
| CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2 | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 8 pages/cpu @c7ccb000 s8576 r8192 d16000 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32000 | |
| Kernel command line: root_rfs=0x00202d40 flash_type=norplusnand ubi.mtd=UBI_DEV clk_ignore_unused | |
| PID hash table entries: 512 (order: -1, 2048 bytes) | |
| Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
| Memory: 121524K/129024K available (3979K kernel code, 201K rwdata, 1160K rodata, 168K init, 601K bss, 7500K reserved, 0K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) | |
| lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0208000 - 0xc070ce3c (5140 kB) | |
| .init : 0xc070d000 - 0xc0737180 ( 169 kB) | |
| .data : 0xc0738000 - 0xc076a4f8 ( 202 kB) | |
| .bss : 0xc076a4f8 - 0xc0800b18 ( 602 kB) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| Preemptible hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| Architected cp15 timer(s) running at 48.00MHz (virt). | |
| sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns | |
| Switching to timer-based delay loop | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x802133e0 - 0x80213438 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated (384.00 BogoMIPS). | |
| CPU: All CPU(s) started in SVC mode. | |
| VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2 | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3 | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1 | |
| hw-breakpoint: CPU 3 failed to disable vector catch | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0 | |
| Version Rollback Feature Disabled | |
| sps:sps is ready. | |
| bio: create slab <bio-0> at 0 | |
| SCSI subsystem initialized | |
| msm_bus_fabric_init_driver | |
| msm_bus_device 580000.ad-hoc-bus: Dev 4096 | |
| msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: get_bus_node_device_data:Failed to get bus clk for bus4096 ctx0 | |
| msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1 | |
| msm_bus_device 580000.ad-hoc-bus: Dev 1024 | |
| msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: get_bus_node_device_data:Failed to get bus clk for bus1024 ctx0 | |
| msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1 | |
| pcie_init: pcie_init: unable to create IPC log context for pcie0-short | |
| pcie_init: pcie_init: unable to create IPC log context for pcie0-long | |
| Switched to clocksource arch_sys_counter | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
| TCP bind hash table entries: 1024 (order: 1, 8192 bytes) | |
| TCP: Hash tables configured (established 1024 bind 1024) | |
| TCP: reno registered | |
| UDP hash table entries: 256 (order: 1, 8192 bytes) | |
| UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
| NET: Registered protocol family 1 | |
| hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| msgmni has been set to 237 | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7 | |
| tcsr 1953000.ess_tcsr: setting ess interface select = 0 | |
| tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000 | |
| tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222 | |
| Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
| msm_serial 78af000.serial: msm_serial: detected port #0 | |
| msm_serial 78af000.serial: uartclk = 1843200 | |
| 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM | |
| msm_serial: console setup on port #0 | |
| console [ttyMSM0] enabled | |
| msm_serial: driver initialized | |
| msm_serial_hsl_init: driver initialized | |
| msm_serial_hs module loaded | |
| brd: module loaded | |
| sps: BAM device 0x07884000 is not registered yet. | |
| sps:BAM 0x07884000 is registered. | |
| sps:BAM 0x07884000 (va:0xc8f40000) enabled: ver:0x19, number of pipes:12 | |
| m25p80 spi0.0: found mx25l1606e, expected n25q128a11 | |
| m25p80 spi0.0: mx25l1606e (2048 Kbytes) | |
| Creating 1 MTD partitions on "msm-nor0": | |
| 0x000000000000-0x000000200000 : "Bootloader" | |
| IMQ driver loaded successfully. (numdevs = 2, numqueues = 1) | |
| Hooking IMQ after NAT on PREROUTING. | |
| Hooking IMQ before NAT on POSTROUTING. | |
| libphy: ipq40xx_mdio: probed | |
| ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered | |
| PPP generic driver version 2.4.2 | |
| PPP Deflate Compression module registered | |
| PPP MPPE Compression module registered | |
| NET: Registered protocol family 24 | |
| PPTP driver version 0.8.5 | |
| i2c /dev entries driver | |
| nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa | |
| nand: Winbond W25N01GV 128MiB 3.3V | |
| nand: 128MiB, SLC, page size: 2048, OOB size: 64 | |
| Scanning device for bad blocks | |
| random: nonblocking pool is initialized | |
| 1 ofpart partitions found on MTD device spi0.1 | |
| Creating 1 MTD partitions on "spi0.1": | |
| 0x000000000000-0x000008000000 : "UBI_DEV" | |
| nf_conntrack version 0.5.0 (1898 buckets, 7592 max) | |
| xt_time: kernel timezone is -0000 | |
| gre: GRE over IPv4 demultiplexor driver | |
| ip_tables: (C) 2000-2006 Netfilter Core Team | |
| arp_tables: (C) 2002 David S. Miller | |
| TCP: cubic registered | |
| NET: Registered protocol family 10 | |
| ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| NET: Registered protocol family 17 | |
| Bridge firewalling registered | |
| l2tp_core: L2TP core driver, V2.0 | |
| l2tp_ppp: PPPoL2TP kernel driver, V2.0 | |
| l2tp_netlink: L2TP netlink interface | |
| 8021q: 802.1Q VLAN Support v1.8 | |
| Registering SWP/SWPB emulation handler | |
| regulator-dummy: disabling | |
| UBI: attaching mtd1 to ubi0 | |
| UBI: scanning is finished | |
| UBI: attached mtd1 (name "UBI_DEV", size 128 MiB) to ubi0 | |
| UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
| UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
| UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
| UBI: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0 | |
| UBI: user volume: 6, internal volumes: 1, max. volumes count: 128 | |
| UBI: max/mean erase counter: 19/0, WL threshold: 4096, image sequence number: 1543254291 | |
| UBI: available PEBs: 20, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 20 | |
| UBI: background thread "ubi_bgt0d" started, PID 69 | |
| gluebi_create: Hook read/write method of Factory. | |
| gluebi_create: Hook read/write method of Factory2. | |
| [Factory-0]: OK (ver: 20) | |
| [Factory2-0]: OK (ver: 20) | |
| Select [Factory-0] | |
| Creating 1 MTD partitions on "linux": | |
| 0x000000202d40-0x000003013000 : "rootfs" | |
| mtd: device 6 (rootfs) set to be root filesystem | |
| Creating 1 MTD partitions on "linux2": | |
| 0x000000202d40-0x000003013000 : "rootfs2" | |
| gluebi_create: skip jffs2 volume | |
| clk: Not disabling unused clocks | |
| VFS: Mounted root (squashfs filesystem) readonly on device 31:6. | |
| Freeing unused kernel memory: 168K (c070d000 - c0737000) | |
| offset 0x0 elapse 0ms | |
| 1: set_action 0 | |
| Hit ENTER for console... | |
| firmware version: 3.0.0.4.380_6516-g6772678 | |
| bootloader version: RT-AC58U-01-00-00-03 | |
| firmware version: 3.0.0.4 | |
| [1 init:init_nvram +16] init_nvram for model(21) | |
| set_basic_ifname_vars: WAN eth0 LAN eth1 2G ath0 5G ath1 USB usb AP_LAN eth0 eth1 DW_WAN (null) DW_LAN eth2 force_dwlan 0, sw_mode 0 | |
| wan_ifnames: eth0 | |
| ## Restoring defaults... ## | |
| get_lan_mac_name: Define LAN MAC address for model 21 | |
| num_of_mssid_support(0x0098): [mssid] support [3] mssid | |
| get_wan_mac_name: Define WAN MAC address for model 21 | |
| num_of_mssid_support(0x0098): [mssid] support [3] mssid | |
| 1: check_action 0 | |
| 1: set_action 7 | |
| 1: set_action 0 | |
| done | |
| 1: check_action 0 | |
| 1: set_action 7 | |
| 1: set_action 0 | |
| get_lan_mac_name: Define LAN MAC address for model 21 | |
| 1: check_action 0 | |
| 1: set_action 7 | |
| 1: set_action 0 | |
| ess-switch DT exist! | |
| switchreg_base_addr: 0xc000000 | |
| switchreg_size: 0x80000 | |
| switch_access_mode: local bus | |
| wan bmp:0x20 | |
| ess-psgmii DT exist! | |
| mac mode=0 | |
| current mac mode = 0 | |
| current dts led_source_num is 0 | |
| mdio DT exist! | |
| ssdk_plat_init start | |
| enable ess clk | |
| reset ok in probe! | |
| PHY ID is 0x4dd0b1 | |
| qca probe malibu phy driver succeeded! | |
| Dakota Chip version 0x1401 | |
| qca-ssdk module init succeeded! | |
| edma module_init | |
| hotplug net INTERFACE=eth0 ACTION=add | |
| hotplug net INTERFACE=eth1 ACTION=add | |
| get_lan_mac_name: Define LAN MAC address for model 21 | |
| get_wan_mac_name: Define WAN MAC address for model 21 | |
| config_switch(0x0182): link down all ports | |
| config_ipq40xx_LANWANPartition: LAN/WAN/WANS_LAN portmask 0000001e/00000020/00000000 | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| SSDK Init OK! | |
| operate done. | |
| config_switch(0x01c6): ISP Profile/STB: none/0 | |
| config_switch(0x02df): link up wan port(s) | |
| bled: GPIO#1: netdev eth0. | |
| bled: GPIO#2: netdev eth1. | |
| bled: GPIO#58: netdev ath0. | |
| bled: GPIO#5: netdev ath1. | |
| bled: GPIO#0: USB BUS mask c. | |
| asf: module license 'Proprietary' taints kernel. | |
| Disabling lock debugging due to kernel taint | |
| ath_hal: 0.9.17.1 (WRITE_EEPROM, 11D) | |
| ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved | |
| ath_dfs: Version 2.0.0 | |
| Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved | |
| ath_spectral: Version 2.0.0 | |
| Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved | |
| SPECTRAL module built on Sep 7 2016 15:02:04 | |
| ath_tx99: Version 2.0 | |
| Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved | |
| ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved | |
| ol_ath_ahb_probe | |
| ol_ath_ahb_probe: io resource start: 0xa000000, mem=0xc9800000 | |
| *********** Dakota ************* | |
| __ol_ath_attach() Allocated scn c54004c0 | |
| ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000040 | |
| Wifi0 CPU frequency 250000000 | |
| ath9k a000000.wifi: ath DEBUG: sc=0xc6987800 | |
| ol_ath_ahb_configure : num_desired MSI set to 0 | |
| Using Legacy Interrupt | |
| Waiting for target init | |
| Done waiting | |
| CLOCK PLL skipped | |
| __ol_ath_attach: dev name wifi0 | |
| ol_ath_attach() BMI inited. | |
| ol_ath_attach() BMI Get Target Info. | |
| Chip id: 0xb, chip version: 0x1000000 | |
| CE WAR Disabled | |
| NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| ol_ath_attach() configure Target . | |
| Target Version is 1000000 | |
| Flash Download Address c0000 | |
| ol_transfer_bin_file: flash data file defined | |
| ol_transfer_bin_file[3962] Get Caldata for wifi0. | |
| qc98xx_verify_checksum: flash checksum passed: 0x5f5d | |
| ol_transfer_bin_file 4028: Download Flash data len 12064 | |
| Board extended Data download address: 0x0 | |
| Board data initialized | |
| ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a000000.wifi: Direct firmware load failed with error 0 | |
| ath9k a000000.wifi: Falling back to user helper | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 0, Download data len 4352 | |
| First OTP send param 8000 | |
| ol_ath_download_firmware :First OTP download and Execute is good address:0x4000 return param 4660 | |
| ol_ath_download_firmware:##Board Id 16 , CHIP Id 0 | |
| ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| wifi0: Selecting board data file name boardData_1_0_IPQ4019_Y9803_wifi0.bin | |
| ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_Y9803_wifi0.bin | |
| ath9k a000000.wifi: Direct firmware load failed with error 0 | |
| ath9k a000000.wifi: Falling back to user helper | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 3, Download data len 12064 | |
| Board extended Data download address: 0x0 | |
| ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a000000.wifi: Direct firmware load failed with error 0 | |
| ath9k a000000.wifi: Falling back to user helper | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 0, Download data len 4352 | |
| [Flash] : Ignore Module param | |
| Second otp download Param 10000 | |
| ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| Mission mode: Firmware CHIP Version 0 | |
| ath9k a000000.wifi: Direct firmware load failed with error 0 | |
| ath9k a000000.wifi: Falling back to user helper | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 | |
| ath9k a000000.wifi: Direct firmware load failed with error 0 | |
| ath9k a000000.wifi: Falling back to user helper | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| Swap: bytes_left to copy: fw:16; dma_page:123317 | |
| Swap: wrong length read:0 | |
| ol_swap_wlan_memory_expansion: Swap total_bytes copied: 138827 Target address 416d20 | |
| scn=c54004c0 target_write_addr=416d20 seg_info=c710cb10 | |
| ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin | |
| ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin | |
| ath9k a000000.wifi: Direct firmware load failed with error 0 | |
| ath9k a000000.wifi: Falling back to user helper | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 1, Download data len 352148 | |
| ol_ath_attach() Download FW done. | |
| ol_ath_attach() HT Create . | |
| ol_ath_attach() HIF Claim. | |
| ol_ath_attach() BMI Done. | |
| ol_ath_attach 7160 host_enable 0 nss_nwifi_offload 0 | |
| ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| OL_ACBKMinfree : 0 | |
| OL_ACBEMinfree : 0 | |
| OL_ACVIMinfree : 0 | |
| OL_ACVOMinfree : 0 | |
| ol_ath_attach() WMI attached. wmi_handle c56e0000 | |
| CE_recv_buf_enqueue 844 Populate last entry 512 for CE 5 | |
| CE_recv_buf_enqueue 853 CE 5 wi 511 dest_ptr 0x84e28040 nbytes 0 recv_ctxt 0xc56c7200 | |
| Startup Mode-0 set | |
| <=== cfg max peer id 544 ====> | |
| HTC Service:0x0300 ep:1 TX flow control disabled | |
| htt_peer_map_timer_init Enter pdev c4ea8000 hrtimer c4eac860 | |
| htt_alloc_peer_map_mem : Alloc Success : host q vaddr c79da000 paddr 879da000 | |
| htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| CE_pkt_dl_len_set CE 4 Pkt download length 64 | |
| ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c4b60000 | |
| HTC Service:0x0100 ep:2 TX flow control disabled | |
| wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event | |
| Firmware_Build_Number:84 | |
| num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa | |
| RES CFG Support wmi_service_bitmap 9778 | |
| Sending Ext resource cfg: HOST PLATFORM as 1 and fw_feature_bitmap as 10 to TGT | |
| ol_ath_service_ready_event: tt_support: 1 | |
| Peer Caching Enabled ; num_peers = 146, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| idx 0 req 1 num_units 0 num_unit_info 2 unit size 720 actual units 147 | |
| ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 147 unit_len 720, | |
| idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35 | |
| ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072, | |
| idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1 | |
| ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144, | |
| idx 6 req 5 num_units 0 num_unit_info 2 unit size 1868 actual units 147 | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 73 unit_len 1868, | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 74 unit_len 1868, | |
| chunk 0 len 13568 requested ,ptr 0x84b48000 | |
| chunk 1 len 54272 requested ,ptr 0x84b50000 | |
| chunk 2 len 217088 requested ,ptr 0x84bc0000 | |
| chunk 3 len 105840 requested ,ptr 0x84400000 | |
| chunk 4 len 107520 requested ,ptr 0x84420000 | |
| chunk 5 len 6144 requested ,ptr 0x84b4c000 | |
| chunk 6 len 136364 requested ,ptr 0x84440000 | |
| chunk 7 len 138232 requested ,ptr 0x84480000 | |
| ol_ath_service_ready_event[3817] WAPI MBSSID 2 | |
| wmi_ready_event_rx: WMI UNIFIED READY event | |
| ol_ath_connect_htc() WMI is ready | |
| target uses HTT version 2.2; host uses 2.2 | |
| ol_ath_attach() connect HTC. | |
| bypasswmi : 0 | |
| ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100 | |
| OL Resmgr Init-ed | |
| ieee80211_bsteering_attach: Band steering initialized | |
| acfg_attach: 6026: Netlink socket created:c443c000 | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_PHYDIAG : Capable | |
| SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_RADAR : Capable | |
| SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| (spectral_attach : 242) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_SPECTRAL_SCAN : Capable | |
| SPECTRAL : get_tsf64 not registered | |
| spectral_init_netlink 78 NULL SKB | |
| Green-AP : Green-AP : Attached | |
| Green-AP : Attached | |
| rate power table override is only supported for AR98XX | |
| ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna. | |
| ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. | |
| ol_ath_attach:7319:Low memory system - netlink socket for wifipos not created | |
| ol_if_dfs_attach: called; ptr=c4469984, radar_info=c5eadc40 | |
| dfs_attach: event log enabled by default | |
| ol_ath_attach() UMAC attach . | |
| BURSTING enabled by default | |
| ol_ath_attach: Set global_ic[1] ..ptr:bf47eb20 | |
| osif_wrap_attach:434 osif wrap attached | |
| osif_wrap_devt_init:395 osif wrap dev table init done | |
| Wrap Attached: Wrap_com =c7115e00 ic->ic_wrap_com=c7115e00 &wrap_com->wc_devt=c7115e00 | |
| __ol_ath_attach: needed_headroom reservation 60 | |
| ol_ath_thermal_mitigation_attach: -- | |
| ol_ath_ahb_probe | |
| ol_ath_ahb_probe: io resource start: 0xa800000, mem=0xc9c00000 | |
| *********** Dakota ************* | |
| __ol_ath_attach() Allocated scn c45804c0 | |
| ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000050 | |
| Wifi1 CPU frequency 250000000 | |
| hotplug net INTERFACE=wifi0 ACTION=add | |
| ath9k a800000.wifi: ath DEBUG: sc=0xc443e400 | |
| ol_ath_ahb_configure : num_desired MSI set to 0 | |
| Using Legacy Interrupt | |
| Waiting for target init | |
| Done waiting | |
| CLOCK PLL skipped | |
| __ol_ath_attach: dev name wifi1 | |
| ol_ath_attach() BMI inited. | |
| ol_ath_attach() BMI Get Target Info. | |
| Chip id: 0xb, chip version: 0x1000000 | |
| CE WAR Disabled | |
| NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| ol_ath_attach() configure Target . | |
| Target Version is 1000000 | |
| Flash Download Address c0000 | |
| ol_transfer_bin_file: flash data file defined | |
| ol_transfer_bin_file[3962] Get Caldata for wifi1. | |
| qc98xx_verify_checksum: flash checksum passed: 0x9067 | |
| ol_transfer_bin_file 4028: Download Flash data len 12064 | |
| Board extended Data download address: 0x0 | |
| Board data initialized | |
| ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a800000.wifi: Direct firmware load failed with error 0 | |
| ath9k a800000.wifi: Falling back to user helper | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 0, Download data len 4352 | |
| First OTP send param 8000 | |
| ol_ath_download_firmware :First OTP download and Execute is good address:0x4400 return param 4660 | |
| ol_ath_download_firmware:##Board Id 17 , CHIP Id 0 | |
| ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| wifi1: Selecting board data file name boardData_1_0_IPQ4019_Y9803_wifi1.bin | |
| ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_Y9803_wifi1.bin | |
| ath9k a800000.wifi: Direct firmware load failed with error 0 | |
| ath9k a800000.wifi: Falling back to user helper | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 3, Download data len 12064 | |
| Board extended Data download address: 0x0 | |
| ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a800000.wifi: Direct firmware load failed with error 0 | |
| ath9k a800000.wifi: Falling back to user helper | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 0, Download data len 4352 | |
| [Flash] : Ignore Module param | |
| Second otp download Param 10000 | |
| ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| Mission mode: Firmware CHIP Version 0 | |
| ath9k a800000.wifi: Direct firmware load failed with error 0 | |
| ath9k a800000.wifi: Falling back to user helper | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 | |
| ath9k a800000.wifi: Direct firmware load failed with error 0 | |
| ath9k a800000.wifi: Falling back to user helper | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| Swap: bytes_left to copy: fw:16; dma_page:123317 | |
| Swap: wrong length read:0 | |
| ol_swap_wlan_memory_expansion: Swap total_bytes copied: 138827 Target address 416d20 | |
| scn=c45804c0 target_write_addr=416d20 seg_info=c44b1610 | |
| ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin | |
| ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin | |
| ath9k a800000.wifi: Direct firmware load failed with error 0 | |
| ath9k a800000.wifi: Falling back to user helper | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3840: downloading file 1, Download data len 352148 | |
| [wifi0] FWLOG: [67130] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [wifi0] FWLOG: [67130] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [wifi0] FWLOG: [67130] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [wifi0] FWLOG: [67130] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| ol_ath_attach() Download FW done. | |
| ol_ath_attach() HT Create . | |
| ol_ath_attach() HIF Claim. | |
| ol_ath_attach() BMI Done. | |
| ol_ath_attach 7160 host_enable 0 nss_nwifi_offload 0 | |
| ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| OL_ACBKMinfree : 0 | |
| OL_ACBEMinfree : 0 | |
| OL_ACVIMinfree : 0 | |
| OL_ACVOMinfree : 0 | |
| ol_ath_attach() WMI attached. wmi_handle c45f0000 | |
| CE_recv_buf_enqueue 844 Populate last entry 512 for CE 5 | |
| CE_recv_buf_enqueue 853 CE 5 wi 511 dest_ptr 0x84301040 nbytes 0 recv_ctxt 0xc4227c00 | |
| Startup Mode-0 set | |
| <=== cfg max peer id 544 ====> | |
| HTC Service:0x0300 ep:1 TX flow control disabled | |
| htt_peer_map_timer_init Enter pdev c4398000 hrtimer c439c860 | |
| htt_alloc_peer_map_mem : Alloc Success : host q vaddr c79de000 paddr 879de000 | |
| htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| CE_pkt_dl_len_set CE 4 Pkt download length 64 | |
| ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from c3840000 | |
| HTC Service:0x0100 ep:2 TX flow control disabled | |
| wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event | |
| Firmware_Build_Number:84 | |
| num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa | |
| RES CFG Support wmi_service_bitmap 9778 | |
| Sending Ext resource cfg: HOST PLATFORM as 1 and fw_feature_bitmap as 10 to TGT | |
| ol_ath_service_ready_event: tt_support: 1 | |
| Peer Caching Enabled ; num_peers = 146, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| idx 0 req 1 num_units 0 num_unit_info 2 unit size 720 actual units 147 | |
| ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 147 unit_len 720, | |
| idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35 | |
| ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072, | |
| idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1 | |
| ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144, | |
| idx 6 req 5 num_units 0 num_unit_info 2 unit size 1868 actual units 147 | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 73 unit_len 1868, | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 74 unit_len 1868, | |
| chunk 0 len 13568 requested ,ptr 0x83830000 | |
| chunk 1 len 54272 requested ,ptr 0x838a0000 | |
| chunk 2 len 217088 requested ,ptr 0x838c0000 | |
| chunk 3 len 105840 requested ,ptr 0x83900000 | |
| chunk 4 len 107520 requested ,ptr 0x83920000 | |
| chunk 5 len 6144 requested ,ptr 0x83826000 | |
| chunk 6 len 136364 requested ,ptr 0x83940000 | |
| chunk 7 len 138232 requested ,ptr 0x83980000 | |
| ol_ath_service_ready_event[3817] WAPI MBSSID 2 | |
| wmi_ready_event_rx: WMI UNIFIED READY event | |
| ol_ath_connect_htc() WMI is ready | |
| target uses HTT version 2.2; host uses 2.2 | |
| ol_ath_attach() connect HTC. | |
| bypasswmi : 0 | |
| ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 | |
| Add VHT80 channel: 5210 | |
| Add VHT80 channel: 5775 | |
| Skipping VHT80 channel 5825 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 | |
| OL Resmgr Init-ed | |
| ieee80211_bsteering_attach: Band steering initialized | |
| acfg_attach: Offload using existing sock c443c000 | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_PHYDIAG : Capable | |
| SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_RADAR : Capable | |
| SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| (spectral_attach : 242) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_SPECTRAL_SCAN : Capable | |
| SPECTRAL : get_tsf64 not registered | |
| spectral_init_netlink 78 NULL SKB | |
| Green-AP : Green-AP : Attached | |
| Green-AP : Attached | |
| rate power table override is only supported for AR98XX | |
| ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna. | |
| ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. | |
| ol_ath_attach:7319:Low memory system - netlink socket for wifipos not created | |
| ol_if_dfs_attach: called; ptr=c3971984, radar_info=c5eadc40 | |
| dfs_attach: event log enabled by default | |
| ol_ath_attach() UMAC attach . | |
| BURSTING enabled by default | |
| ol_ath_attach: Set global_ic[2] ..ptr:bf47eb20 | |
| osif_wrap_attach:434 osif wrap attached | |
| osif_wrap_devt_init:395 osif wrap dev table init done | |
| Wrap Attached: Wrap_com =c4463400 ic->ic_wrap_com=c4463400 &wrap_com->wc_devt=c4463400 | |
| __ol_ath_attach: needed_headroom reservation 60 | |
| ol_ath_thermal_mitigation_attach: -- | |
| ath_pci: (Atheros/multi-bss) | |
| hotplug net INTERFACE=wifi1 ACTION=add | |
| isCountryCodeValid: EEPROM regdomain 0x0 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100 | |
| isCountryCodeValid: EEPROM regdomain 0x0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 | |
| Add VHT80 channel: 5210 | |
| Add VHT80 channel: 5290 | |
| Add VHT80 channel: 5530 | |
| Skipping VHT80 channel 5580 | |
| Skipping VHT80 channel 5660 | |
| Skipping VHT80 channel 5680 | |
| Skipping VHT80 channel 5700 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 | |
| [wifi1] FWLOG: [69361] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [wifi1] FWLOG: [69361] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [wifi1] FWLOG: [69361] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [wifi1] FWLOG: [69361] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| Switching to Tx Mode-0 | |
| init_wl(0x041f): init_wl:create wi node | |
| init_wl(0x0430): | |
| create a wifi node ath0 from wifi0 | |
| wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 70:4d:7b:XX:YY:ZZ: | |
| ieee80211_vap_setup:387:Low memory system - wifipos disabled | |
| __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!! | |
| Enabling TX checksum bit for the vap ath0 features 4000 | |
| Enabling SG bit for the vap ath0 features 4000 | |
| Enabling SG bit for the vap ath0 features 4000 | |
| Enabling TSO bit for the vap ath0 features 4000 | |
| Enabling LRO bit for the vap ath0 features 4000 | |
| VAP device ath0 created osifp: (c64704c0) os_if: (c56b8000) | |
| ath0 | |
| hotplug net INTERFACE=ath0 ACTION=add | |
| Switching to Tx Mode-0 | |
| init_wl(0x0430): | |
| create a wifi node ath1 from wifi1 | |
| wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 70:4d:7b:XX:YY:ZZ: | |
| ieee80211_vap_setup:387:Low memory system - wifipos disabled | |
| __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!! | |
| Enabling TX checksum bit for the vap ath1 features 4000 | |
| Enabling SG bit for the vap ath1 features 4000 | |
| Enabling SG bit for the vap ath1 features 4000 | |
| Enabling TSO bit for the vap ath1 features 4000 | |
| Enabling LRO bit for the vap ath1 features 4000 | |
| VAP device ath1 created osifp: (c71864c0) os_if: (c45e8000) | |
| ath1 | |
| hotplug net INTERFACE=ath1 ACTION=add | |
| 1: check_action 0 | |
| *** ubifs: 0, 5, 22982656 | |
| / # gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| gluebi (pid 334): gluebi_updated: got update notification for unknown UBI device 0 volume 5 | |
| Clean /jffs/* | |
| 1: check_action 0 | |
| 1: set_action 7 | |
| 1: set_action 0 | |
| start_logger: | |
| update_lan_state(lan_, 0, 0) | |
| start_lan: setting up the bridge br0 | |
| hotplug net INTERFACE=br0 ACTION=add | |
| _ifconfig: name=eth1 flags=1243 IFUP addr=(null) netmask=(null) | |
| start_lan: setting MAC of br0 bridge to 70:4D:7B:XX:YY:ZZ | |
| _ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.1 netmask=255.255.255.0 | |
| gen qca config | |
| mac_filter[0] = 0 | |
| gen qca config | |
| mac_filter[0] = 0 | |
| _ifconfig: name=ath0 flags=0000 addr=(null) netmask=(null) | |
| _ifconfig: name=ath1 flags=0000 addr=(null) netmask=(null) | |
| siwfreq | |
| Set freq vap 0 stop send + c56b8000 | |
| Set freq vap 0 stop send -c56b8000 | |
| Set wait done --c56b8000 | |
| List Flushed | |
| siwfreq | |
| Set freq vap 0 stop send + c45e8000 | |
| Set freq vap 0 stop send -c45e8000 | |
| Set wait done --c45e8000 | |
| _ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0 | |
| route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0 | |
| update_lan_state(lan_, 2, 0) | |
| nat_rule: stop_nat_rules 1. | |
| stop_nat_rules: apply the redirect_rules! | |
| start_lan 2306 | |
| [1 init:start_dnsmasq +44] begin | |
| [1 init:stop_dnsmasq +44] begin | |
| # wanduck: Got LAN(-1) information: | |
| [1 init:stop_dnsmasq +44] end | |
| # Enable direct rule | |
| [1 init:start_dnsmasq +44] end | |
| get_lan_mac_name: Define LAN MAC address for model 21 | |
| start_lan_port(0) 1 | |
| TZ watchdog | |
| decomp: fname=/var/lib/misc/rstats-speed.gz | |
| decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0 | |
| load: speed_count = 0 | |
| load: read source= save_path= | |
| load_history: fname=/var/lib/misc/rstats-history.gz | |
| decomp: fname=/var/lib/misc/rstats-history.gz | |
| decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0 | |
| decomp: fname=/var/lib/misc/rstats-history.gz | |
| decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0 | |
| load_history: load failed | |
| disk_monitor: starting... | |
| disk_monitor: day=1, week=6, time=0:0. | |
| disk_monitor: decide if scan the target... | |
| disk_monitor: 0: wait_second=86400... | |
| disk_monitor: 1: wait_second=86400... | |
| disk_monitor: wait_second=86400... | |
| disk_monitor: Pause... | |
| get_lan_mac_name: Define LAN MAC address for model 21 | |
| reinit_sfe:WAN: unit -1,0 type 4 nat_x 1 qos 0: action 1. | |
| start_wan: start_wan_if(0)! | |
| [1 init:start_wan_if +45] unit=0. | |
| update_wan_state(wan0_, 0, 0) | |
| convert_wan_nvram(wan0_) | |
| get_wan_mac_name: Define WAN MAC address for model 21 | |
| ** wan_ifname: eth0 is NOT UP | |
| _ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null) | |
| update_wan_state(wan0_, 1, 0) | |
| start_wan_if(0x0758): ifup:eth0 | |
| _ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null) | |
| start_wan_if(0x075c): start auth:0 | |
| start_auth:: done | |
| start_wan_if(0x0765): start udhcpc:eth0, 0 | |
| start_wan_if(): End. | |
| start_usb | |
| insmod dakota usb module.... | |
| udhcpc_wan:: deconfig | |
| _ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=(null) | |
| wan_down(eth0) | |
| wan_down(eth0): . | |
| stop_auth:: done | |
| route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0 | |
| update_wan_state(wan0_, 3, 0) | |
| update_wan_state(wan0_, 4, 3) | |
| udhcpc:: deconfig done | |
| get_lan_mac_name: Define LAN MAC address for model 21 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| DES SSID SET=ASUS_20_2G | |
| [wifi0] FWLOG: [82843] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3c1 ) | |
| [wifi0] FWLOG: [82900] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [83214] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [83529] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [83843] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [84157] WAL channel change freq=2432, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| WARNING: Running kernel does not match configured kernel headers the driver was built with! The driver needs to be rebuilt with the correct kernel headers! | |
| ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 | |
| osif_vap_stop: Scan in progress.. Cancelling it. vap: 0xc56b8000 | |
| wmi_unified_vdev_down_send for vap 0 (c56e0000) | |
| DEVICE IS DOWN ifname=ath0 | |
| DEVICE IS DOWN ifname=ath0 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| DES SSID SET=ASUS_20_5G | |
| ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 | |
| osif_vap_stop: Scan in progress.. Cancelling it. vap: 0xc45e8000 | |
| wmi_unified_vdev_down_send for vap 0 (c45f0000) | |
| DEVICE IS DOWN ifname=ath1 | |
| DEVICE IS DOWN ifname=ath1 | |
| [wifi0] FWLOG: [84471] WAL channel change freq=2437, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [84499] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [84499] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [84611] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [84926] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [85240] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| siwfreq | |
| Set freq vap 0 stop send + c56b8000 | |
| osif_vap_acs_cancel: Scan in progress.. Cancelling it vap: 0xc56b8000 | |
| wmi_unified_vdev_down_send for vap 0 (c56e0000) | |
| Set freq vap 0 stop send -c56b8000 | |
| Set wait done --c56b8000 | |
| siwfreq | |
| Set freq vap 0 stop send + c45e8000 | |
| osif_vap_acs_cancel: Scan in progress.. Cancelling it vap: 0xc45e8000 | |
| wmi_unified_vdev_down_send for vap 0 (c45f0000) | |
| Set freq vap 0 stop send -c45e8000 | |
| Set wait done --c45e8000 | |
| [wifi1] FWLOG: [84856] WAL_DBGID_DEV_RESET ( 0xc01d, 0x371 ) | |
| [wifi1] FWLOG: [84898] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [85062] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi1] FWLOG: [85062] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi1] FWLOG: [85423] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi1] FWLOG: [85423] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| xhci-hcd xhci-hcd.0.auto: ## USB3 port 0/1 addr(ca3f0430) s1(000002a0) --> (000002a0) | |
| hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) | |
| [1 init:init_main +50] recv signal 14 from pid [1:/sbin/init] (from user) | |
| [wifi0] FWLOG: [85349] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [85349] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [85410] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [85725] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [86039] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [85797] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [86112] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [86426] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [86354] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [86667] WAL channel change freq=2432, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [86982] WAL channel change freq=2437, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [87296] WAL channel change freq=2442, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [86740] WAL channel change freq=5260, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [87053] WAL channel change freq=5280, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [87368] WAL channel change freq=5300, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [87609] WAL channel change freq=2447, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [87924] WAL channel change freq=2452, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [88238] WAL channel change freq=2457, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [87683] WAL channel change freq=5320, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [87996] WAL channel change freq=5500, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [88310] WAL channel change freq=5520, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [88552] WAL channel change freq=2462, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [88866] WAL channel change freq=2467, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [89180] WAL channel change freq=2472, mode=1 flags=0 rx_ok=1 tx_ok=1 | |
| wmi_unified_vdev_down_send for vap 0 (c56e0000) | |
| mlme_create_infra_bss : Overriding HT40 channel with HT20 channel | |
| OL vap_start + | |
| wmi_unified_vdev_start_send for vap 0 (c56e0000) | |
| OL vap_start - | |
| ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43 | |
| [wifi1] FWLOG: [88625] WAL channel change freq=5540, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [88939] WAL channel change freq=5560, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [89254] WAL channel change freq=5580, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [89568] WAL channel change freq=5660, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| ol_vdev_start_resp_ev for vap 0 (c56e0000) | |
| ol_ath_wmm_update: | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| wmi_unified_vdev_up_send for vap 0 (c56e0000) | |
| __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!! | |
| [wifi0] FWLOG: [89494] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [89494] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [89504] vap-0 VDEV_MGR_VDEV_START ( 0x985, 0x2, 0x0, 0x0 ) | |
| [wifi0] FWLOG: [89504] WAL channel change freq=2437, mode=5 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi0] FWLOG: [89730] VDEV_MGR_HP_START_TIME ( 0x0, 0x985, 0x1518000 ) | |
| [wifi0] FWLOG: [89730] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) | |
| [wifi0] FWLOG: [89730] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi0] FWLOG: [89730] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x985, 0x0, 0x0 ) | |
| wmi_unified_vdev_down_send for vap 0 (c45f0000) | |
| OL vap_start + | |
| wmi_unified_vdev_start_send for vap 0 (c45f0000) | |
| OL vap_start - | |
| ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 | |
| ol_vdev_start_resp_ev for vap 0 (c45f0000) | |
| ol_ath_wmm_update: | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| wmi_unified_vdev_up_send for vap 0 (c45f0000) | |
| __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!! | |
| [wifi1] FWLOG: [89882] WAL channel change freq=5680, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [90197] WAL channel change freq=5700, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [wifi1] FWLOG: [90510] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi1] FWLOG: [90510] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi1] FWLOG: [90515] vap-0 VDEV_MGR_VDEV_START ( 0x143c, 0x2, 0x0, 0x0 ) | |
| [wifi1] FWLOG: [90515] WAL channel change freq=5180, mode=10 flags=0 rx_ok=1 tx_ok=1 | |
| udhcpc_wan:: leasefail | |
| [1 init:init_main +57] recv signal 14 from pid [1:/sbin/init] (from user) | |
| [wifi1] FWLOG: [92027] VDEV_MGR_HP_START_TIME ( 0x0, 0x143c, 0x1531001 ) | |
| [wifi1] FWLOG: [92027] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) | |
| [wifi1] FWLOG: [92027] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [wifi1] FWLOG: [92027] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x143c, 0x0, 0x0 ) | |
| udhcpc_wan:: leasefail | |
| [1 init:init_main +95] recv signal 14 from pid [1:/sbin/init] (from user) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment