Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save rayddteam/ac8c1593aa9b79fc9fd55cd75ac959e2 to your computer and use it in GitHub Desktop.
Save rayddteam/ac8c1593aa9b79fc9fd55cd75ac959e2 to your computer and use it in GitHub Desktop.
FreeBSD boot log Buffalo WZR-HP-G301NH
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p8 #0 r313908+312f06f761f(HEAD)-dirty: Wed Mar 28 15:29:38 JST 2018
josef@freebsd-virtual:/usr/home/josef/ZRouter/obj/usr/home/josef/ZRouter/ZRouter/tmp/mips.mips/usr/home/josef/freebsd/sys/Buffalo_WZR-HP-G301NH mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x804832d0.
link_elf_lookup_symbol: missing symbol hash table
link_elf_lookup_symbol: missing symbol hash table
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00515000 - 0x03ebafff, 60448768 bytes (14758 pages)
avail memory = 59797504 (57MB)
random: entropy device external interface
wlan: <802.11 Link Layer>
null: <full device, null device, zero device>
mem: <memory>
nexus0: <MIPS32 root nexus>
ar71xx_wdog: ar71xx_wdog0 already exists; skipping it
nexus0: failed to add child: ar71xx_wdog0
random: harvesting attach, 8 bytes (4 bits) from nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart0
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x2000
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1e5040
gpiobus0: <GPIO bus> on gpio0
gpioiic0: <GPIO I2C bit-banging driver> at pins 19-20 on gpiobus0
gpioiic0: SCL pin: 20, SDA pin: 19
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
rtl8366rb0: rev. 3
miibus0: <MII bus> on rtl8366rb0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00e04c, model 0x0016, rev. 1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
miibus1: <MII bus> on rtl8366rb0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00e04c, model 0x0016, rev. 1
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
miibus2: <MII bus> on rtl8366rb0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00e04c, model 0x0016, rev. 1
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy2
random: harvesting attach, 8 bytes (4 bits) from miibus2
miibus3: <MII bus> on rtl8366rb0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00e04c, model 0x0016, rev. 1
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy3
random: harvesting attach, 8 bytes (4 bits) from miibus3
miibus4: <MII bus> on rtl8366rb0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00e04c, model 0x0016, rev. 1
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy4
random: harvesting attach, 8 bytes (4 bits) from miibus4
etherswitch0: <Switch controller> on rtl8366rb0
random: harvesting attach, 8 bytes (4 bits) from etherswitch0
random: harvesting attach, 8 bytes (4 bits) from rtl8366rb0
iic0: <I2C generic I/O> on iicbus0
random: harvesting attach, 8 bytes (4 bits) from iic0
random: harvesting attach, 8 bytes (4 bits) from iicbus0
random: harvesting attach, 8 bytes (4 bits) from iicbb0
random: harvesting attach, 8 bytes (4 bits) from gpioiic0
gpioled0: <GPIO led> at pin 6 on gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpioled0
gpioled1: <GPIO led> at pin 17 on gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpioled1
gpioled2: <GPIO led> at pin 18 on gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpioled2
gpiobus0: <unknown device> at pin 12
gpiobus0: <unknown device> at pin 13
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
random: harvesting attach, 8 bytes (4 bits) from gpio0
random: harvesting attach, 8 bytes (4 bits) from apb0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: arge_fetch_pll_config: pll_1000 = 0x1f000000
arge0: arge_attach: overriding MII mode to 'RGMII'
arge0: Generating random ethernet address.
mii_attach_proxy: not attaching, no mdio device hint for arge0
arge0: finishing attachment, phymask 0000, proxy null
arge0: bpf attached
arge0: Ethernet address: 62:73:64:2b:ee:de
random: harvesting attach, 8 bytes (4 bits) from arge0
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC from EEPROM
arge1: arge_fetch_pll_config: pll_1000 = 0x100
arge1: arge_attach: overriding MII mode to 'RGMII'
miiproxy0: <MII/MDIO proxy, MII side> on arge1
random: harvesting attach, 8 bytes (4 bits) from miiproxy0
arge1: can't attach proxy
arge1: finishing attachment, phymask 0010, proxy null
arge1: unable to attach PHY 4: 6
device_attach: arge1 attach returned 6
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <spibus bus> on spi0
random: harvesting attach, 8 bytes (4 bits) from spibus0
random: harvesting attach, 8 bytes (4 bits) from spi0
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
ar71xx_wdog0: Previous reset was due to watchdog timeout
random: harvesting attach, 8 bytes (4 bits) from ar71xx_wdog0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from ehci0
cfi0 at mem 0xbe000000-0xbfffffff on nexus0
cfi0: [256x128KB]
cfid0 on cfi0
random: harvesting attach, 8 bytes (4 bits) from cfid0
random: harvesting attach, 8 bytes (4 bits) from cfi0
ath0: Vendor=0x168c, Device=0x000b
ath0: Vendor=0x168c, Device=0x000b
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
ath0: eeprom @ 0x1fff1000 (4096 bytes)
ath0: eeprom data @ 0xbfff1000
ath0: [HT] enabling HT modes
ath0: [HT] 2 RX streams; 2 TX streams
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 2T2R
ath0: 11ng MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: 11ng MCS 40MHz:
ath0: MCS 0-7: 13.5Mbps - 135Mbps
ath0: MCS 8-15: 27Mbps - 270Mbps
ath0: 11ng MCS 40MHz SGI:
ath0: MCS 0-7: 15Mbps - 150Mbps
ath0: MCS 8-15: 30Mbps - 300Mbps
ath0: AR9130 mac 20.1 RF2133 phy 10.2
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00d0
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
random: harvesting attach, 8 bytes (4 bits) from ath0
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
rtl8366rb0port0: link state changed to DOWN
rtl8366rb0port1: link state changed to DOWN
rtl8366rb0port2: link state changed to DOWN
rtl8366rb0port3: link state changed to DOWN
rtl8366rb0port4: link state changed to DOWN
GEOM: new disk cfid0
usbus0: 480Mbps High Speed USB v2.0
MAP: cfid0: 0x40000, data=0x40000 "/dev/map/uboot"
MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/uboot_environ"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: cfid0: 60000x150000, data=0x150000 "/dev/map/kernel"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: cfid0: 1b0000x1e10000, data=0x1e10000 "/dev/map/rootfs"
MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/config"
MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/ART"
MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade"
MAP: No valid partition found at map/rootfs.uzip
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
cd9660: RockRidge Extension
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
rtl8366rb0port0: link state changed to UP
Shared object "libncursesw.so.8" not found, required by "libedit.so.7"
Jan 1 00:00:07 init: NSSWITCH(_nsdispatch): nis, passwd_compat, endpwent, not found, and no fallback provided
Enter full pathname of shell or RETURN for /bin/sh:
Shared object "libncursesw.so.8" not found, required by "libedit.so.7"
Shared object "libncursesw.so.8" not found, required by "libedit.so.7"
Jan 1 00:00:22 init: NSSWITCH(_nsdispatch): nis, passwd_compat, endpwent, not found, and no fallback provided
Enter full pathname of shell or RETURN for /bin/sh:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment