Third boot with backslash fixed and FreeBSD current

gistfile1.txt

Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 65e4b69acf0(master)-dirty: Fri Mar 30 23:25:33 JST 2018
    josef@freebsd-virtual:/usr/home/josef/ZRouter/obj/usr/home/josef/ZRouter/ZRouter/tmp/usr/home/josef/freebsd/mips.mips/sys/Buffalo_WZR-HP-G301NH mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x80505e00.
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00598000 - 0x03ef7fff, 60162048 bytes (14688 pages)
avail memory = 59342848 (56MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
wlan: <802.11 Link Layer>
[ath_hal] loaded
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
ar71xx_wdog: ar71xx_wdog0 already exists; skipping it
nexus0: failed to add child: ar71xx_wdog0
random: harvesting attach, 8 bytes (4 bits) from nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart0
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x2000
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1e5040
gpiobus0: <GPIO bus> on gpio0
gpioiic0: <GPIO I2C bit-banging driver> at pins 19-20 on gpiobus0
gpioiic0: SCL pin: 20, SDA pin: 19
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
rtl8366rb0: rev. 3
miibus0: <MII bus> on rtl8366rb0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00e04c, model 0x0016, rev. 1
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
miibus1: <MII bus> on rtl8366rb0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00e04c, model 0x0016, rev. 1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
miibus2: <MII bus> on rtl8366rb0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00e04c, model 0x0016, rev. 1
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy2
random: harvesting attach, 8 bytes (4 bits) from miibus2
miibus3: <MII bus> on rtl8366rb0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00e04c, model 0x0016, rev. 1
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy3
random: harvesting attach, 8 bytes (4 bits) from miibus3
etherswitch0: <Switch controller> on rtl8366rb0
random: harvesting attach, 8 bytes (4 bits) from etherswitch0
mdio0: <MDIO> on rtl8366rb0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
random: harvesting attach, 8 bytes (4 bits) from mdioproxy0
random: harvesting attach, 8 bytes (4 bits) from mdio0
random: harvesting attach, 8 bytes (4 bits) from rtl8366rb0
iic0: <I2C generic I/O> on iicbus0
random: harvesting attach, 8 bytes (4 bits) from iic0
random: harvesting attach, 8 bytes (4 bits) from iicbus0
random: harvesting attach, 8 bytes (4 bits) from iicbb0
random: harvesting attach, 8 bytes (4 bits) from gpioiic0
gpioled0: <GPIO led> at pin 6 on gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpioled0
gpioled1: <GPIO led> at pin 17 on gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpioled1
gpioled2: <GPIO led> at pin 18 on gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpioled2
gpiobus0: <unknown device> at pin 12
gpiobus0: <unknown device> at pin 13
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
random: harvesting attach, 8 bytes (4 bits) from gpio0
random: harvesting attach, 8 bytes (4 bits) from apb0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: arge_fetch_pll_config: pll_1000 = 0x1f000000
arge0: arge_attach: overriding MII mode to 'RGMII'
arge0: Generating random ethernet address.
mii_attach_proxy: not attaching, no mdio device hint for arge0
arge0: finishing attachment, phymask 0000, proxy null 
arge0: bpf attached
arge0: Ethernet address: 62:73:64:2a:b7:74
random: harvesting attach, 8 bytes (4 bits) from arge0
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC from EEPROM
arge1: arge_fetch_pll_config: pll_1000 = 0x100
arge1: arge_attach: overriding MII mode to 'RGMII'
miiproxy0: <MII/MDIO proxy, MII side> on arge1
random: harvesting attach, 8 bytes (4 bits) from miiproxy0
miiproxy0: attached to target mdio0
arge1: finishing attachment, phymask 0010, proxy set 
miibus4: <MII bus> on miiproxy0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00e04c, model 0x0016, rev. 1
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy4
random: harvesting attach, 8 bytes (4 bits) from miibus4
arge1: bpf attached
arge1: Ethernet address: 00:24:a5:b0:58:e4
random: harvesting attach, 8 bytes (4 bits) from arge1
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <spibus bus> on spi0
random: harvesting attach, 8 bytes (4 bits) from spibus0
random: harvesting attach, 8 bytes (4 bits) from spi0
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
ar71xx_wdog0: Previous reset was due to watchdog timeout
random: harvesting attach, 8 bytes (4 bits) from ar71xx_wdog0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from ehci0
cfi0 at mem 0xbe000000-0xbfffffff on nexus0
cfi0: [256x128KB]
cfid0 on cfi0
random: harvesting attach, 8 bytes (4 bits) from cfid0
random: harvesting attach, 8 bytes (4 bits) from cfi0
ath0: Vendor=0x168c, Device=0x000b
ath0: Vendor=0x168c, Device=0x000b
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
ath0: unable to attach hardware; HAL status 8
Unimplemented nexus_teardown_intr at /usr/home/josef/freebsd/sys/mips/mips/nexus.c:511
device_attach: ath0 attach returned 6
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
rtl8366rb0port0: link state changed to DOWN
rtl8366rb0port1: link state changed to DOWN
rtl8366rb0port2: link state changed to DOWN
rtl8366rb0port3: link state changed to DOWN
GEOM: new disk cfid0
usbus0: 480Mbps High Speed USB v2.0
MAP: cfid0: 0x40000, data=0x40000 "/dev/map/uboot"
MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/uboot_environ"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: cfid0: 60000x170000, data=0x170000 "/dev/map/kernel"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: cfid0: 1d0000x1df0000, data=0x1df0000 "/dev/map/rootfs"
MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/config"
MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/ART"
MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade"
MAP: No valid partition found at map/rootfs.uzip
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
rtl8366rb0port0: link state changed to UP
ugen0.2: <Kingston DataTraveler 2.0> at usbus0
umass0 on uhub0
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 2> on usbus0
umass0:0:0: Attached to scbus0
random: harvesting attach, 8 bytes (4 bits) from umass0
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device
da0: Serial Number 001D0F1E35B25C8B101340BF
da0: 40.000MB/s transfers
da0: 1906MB (3905407 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
da0: Delete methods: <NONE(*),ZERO>
MAP: No valid partition found at da0
MAP: No valid partition found at da0s1
256+0 records in
256+0 records out
131072 bytes transferred in 0.233604 secs (561085 bytes/sec)
tar: Error opening archive: Unrecognized archive format
kern.hintmode: 1 -> 2
kern.coredump: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
debug.kdb.break_to_debugger: 1 -> 1
eval: mpd: not found
random: unblocking device.
unknown key type rsa1
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
The key fingerprint is:
SHA256:icYuQQdy22pSqwzQbciwrotobh+MdzQEFanzZMrmT5k root@
The key's randomart image is:
+---[DSA 1024]----+
|. ..+oo          |
| = =.=           |
|o + B.o          |
|o  *.B . .       |
|..o @o+ S        |
|.ooB.=+          |
|..=+.E.          |
|o+..+.           |
|B.....           |
+----[SHA256]-----+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
The key fingerprint is:
SHA256:cx5W2KvZoUt4N9YtaSO8dlPlG8p/jp7+n7vYgH/v4+c root@
The key's randomart image is:
+---[RSA 2048]----+
|                 |
|           o     |
|          . o    |
|           . .  .|
|        S + o  ..|
|         * B.o +o|
|        . B.O.B.+|
|         o +oB*O+|
|          ...*O&E|
+----[SHA256]-----+
Starting cron.
cron: tabs: No such file or directory
cron: tabs: created