Forked from josla972/gist:35453998be8eaee2acaed4e38ca77687
Created
March 30, 2018 13:28
-
-
Save rayddteam/e12aa4d9167634726d1ef5de67ca4434 to your computer and use it in GitHub Desktop.
Second boot with ncursesw
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
KDB: debugger backends: ddb | |
KDB: current backend: ddb | |
Copyright (c) 1992-2017 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 11.1-RELEASE-p8 #0 r313908+312f06f761f(HEAD)-dirty: Wed Mar 28 15:29:38 JST 2018 | |
josef@freebsd-virtual:/usr/home/josef/ZRouter/obj/usr/home/josef/ZRouter/ZRouter/tmp/mips.mips/usr/home/josef/freebsd/sys/Buffalo_WZR-HP-G301NH mips | |
gcc version 4.2.1 20070831 patched [FreeBSD] | |
Preloaded elf kernel "kernel" at 0x804832d0. | |
link_elf_lookup_symbol: missing symbol hash table | |
link_elf_lookup_symbol: missing symbol hash table | |
real memory = 67108864 (65536K bytes) | |
Physical memory chunk(s): | |
0x00515000 - 0x03ebafff, 60448768 bytes (14758 pages) | |
avail memory = 59797504 (57MB) | |
random: entropy device external interface | |
wlan: <802.11 Link Layer> | |
null: <full device, null device, zero device> | |
mem: <memory> | |
nexus0: <MIPS32 root nexus> | |
ar71xx_wdog: ar71xx_wdog0 already exists; skipping it | |
nexus0: failed to add child: ar71xx_wdog0 | |
random: harvesting attach, 8 bytes (4 bits) from nexus0 | |
clock0: <Generic MIPS32 ticker> on nexus0 | |
Timecounter "MIPS32" frequency 200000000 Hz quality 800 | |
Event timer "MIPS32" frequency 200000000 Hz quality 800 | |
random: harvesting attach, 8 bytes (4 bits) from clock0 | |
apb0 at irq 4 on nexus0 | |
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 | |
uart0: console (115200,n,8,1) | |
uart0: fast interrupt | |
uart0: PPS capture mode: DCDinvalid | |
random: harvesting attach, 8 bytes (4 bits) from uart0 | |
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 | |
gpio0: [GIANT-LOCKED] | |
gpio0: function_set: 0x2000 | |
gpio0: function_clear: 0x0 | |
gpio0: gpio pinmask=0x1e5040 | |
gpiobus0: <GPIO bus> on gpio0 | |
gpioiic0: <GPIO I2C bit-banging driver> at pins 19-20 on gpiobus0 | |
gpioiic0: SCL pin: 20, SDA pin: 19 | |
iicbb0: <I2C bit-banging driver> on gpioiic0 | |
iicbus0: <Philips I2C bus> on iicbb0 master-only | |
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0 | |
rtl8366rb0: rev. 3 | |
miibus0: <MII bus> on rtl8366rb0 | |
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 | |
ukphy0: OUI 0x00e04c, model 0x0016, rev. 1 | |
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
random: harvesting attach, 8 bytes (4 bits) from ukphy0 | |
random: harvesting attach, 8 bytes (4 bits) from miibus0 | |
miibus1: <MII bus> on rtl8366rb0 | |
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 | |
ukphy1: OUI 0x00e04c, model 0x0016, rev. 1 | |
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
random: harvesting attach, 8 bytes (4 bits) from ukphy1 | |
random: harvesting attach, 8 bytes (4 bits) from miibus1 | |
miibus2: <MII bus> on rtl8366rb0 | |
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 | |
ukphy2: OUI 0x00e04c, model 0x0016, rev. 1 | |
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
random: harvesting attach, 8 bytes (4 bits) from ukphy2 | |
random: harvesting attach, 8 bytes (4 bits) from miibus2 | |
miibus3: <MII bus> on rtl8366rb0 | |
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 | |
ukphy3: OUI 0x00e04c, model 0x0016, rev. 1 | |
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
random: harvesting attach, 8 bytes (4 bits) from ukphy3 | |
random: harvesting attach, 8 bytes (4 bits) from miibus3 | |
miibus4: <MII bus> on rtl8366rb0 | |
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 | |
ukphy4: OUI 0x00e04c, model 0x0016, rev. 1 | |
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
random: harvesting attach, 8 bytes (4 bits) from ukphy4 | |
random: harvesting attach, 8 bytes (4 bits) from miibus4 | |
etherswitch0: <Switch controller> on rtl8366rb0 | |
random: harvesting attach, 8 bytes (4 bits) from etherswitch0 | |
random: harvesting attach, 8 bytes (4 bits) from rtl8366rb0 | |
iic0: <I2C generic I/O> on iicbus0 | |
random: harvesting attach, 8 bytes (4 bits) from iic0 | |
random: harvesting attach, 8 bytes (4 bits) from iicbus0 | |
random: harvesting attach, 8 bytes (4 bits) from iicbb0 | |
random: harvesting attach, 8 bytes (4 bits) from gpioiic0 | |
gpioled0: <GPIO led> at pin 6 on gpiobus0 | |
random: harvesting attach, 8 bytes (4 bits) from gpioled0 | |
gpioled1: <GPIO led> at pin 17 on gpiobus0 | |
random: harvesting attach, 8 bytes (4 bits) from gpioled1 | |
gpioled2: <GPIO led> at pin 18 on gpiobus0 | |
random: harvesting attach, 8 bytes (4 bits) from gpioled2 | |
gpiobus0: <unknown device> at pin 12 | |
gpiobus0: <unknown device> at pin 13 | |
random: harvesting attach, 8 bytes (4 bits) from gpiobus0 | |
gpioc0: <GPIO controller> on gpio0 | |
random: harvesting attach, 8 bytes (4 bits) from gpioc0 | |
random: harvesting attach, 8 bytes (4 bits) from gpio0 | |
random: harvesting attach, 8 bytes (4 bits) from apb0 | |
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 | |
arge0: arge_fetch_pll_config: pll_1000 = 0x1f000000 | |
arge0: arge_attach: overriding MII mode to 'RGMII' | |
arge0: Generating random ethernet address. | |
mii_attach_proxy: not attaching, no mdio device hint for arge0 | |
arge0: finishing attachment, phymask 0000, proxy null | |
arge0: bpf attached | |
arge0: Ethernet address: 62:73:64:2b:ee:de | |
random: harvesting attach, 8 bytes (4 bits) from arge0 | |
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 | |
arge1: Overriding MAC from EEPROM | |
arge1: arge_fetch_pll_config: pll_1000 = 0x100 | |
arge1: arge_attach: overriding MII mode to 'RGMII' | |
miiproxy0: <MII/MDIO proxy, MII side> on arge1 | |
random: harvesting attach, 8 bytes (4 bits) from miiproxy0 | |
arge1: can't attach proxy | |
arge1: finishing attachment, phymask 0010, proxy null | |
arge1: unable to attach PHY 4: 6 | |
device_attach: arge1 attach returned 6 | |
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 | |
spibus0: <spibus bus> on spi0 | |
random: harvesting attach, 8 bytes (4 bits) from spibus0 | |
random: harvesting attach, 8 bytes (4 bits) from spi0 | |
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 | |
ar71xx_wdog0: Previous reset was due to watchdog timeout | |
random: harvesting attach, 8 bytes (4 bits) from ar71xx_wdog0 | |
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0 | |
usbus0: EHCI version 1.0 | |
usbus0 on ehci0 | |
ehci0: usbpf: Attached | |
random: harvesting attach, 8 bytes (4 bits) from usbus0 | |
random: harvesting attach, 8 bytes (4 bits) from ehci0 | |
cfi0 at mem 0xbe000000-0xbfffffff on nexus0 | |
cfi0: [256x128KB] | |
cfid0 on cfi0 | |
random: harvesting attach, 8 bytes (4 bits) from cfid0 | |
random: harvesting attach, 8 bytes (4 bits) from cfi0 | |
ath0: Vendor=0x168c, Device=0x000b | |
ath0: Vendor=0x168c, Device=0x000b | |
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0 | |
ath0: eeprom @ 0x1fff1000 (4096 bytes) | |
ath0: eeprom data @ 0xbfff1000 | |
ath0: [HT] enabling HT modes | |
ath0: [HT] 2 RX streams; 2 TX streams | |
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps | |
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps | |
ath0: 2T2R | |
ath0: 11ng MCS 20MHz | |
ath0: MCS 0-7: 6.5Mbps - 65Mbps | |
ath0: MCS 8-15: 13Mbps - 130Mbps | |
ath0: 11ng MCS 40MHz: | |
ath0: MCS 0-7: 13.5Mbps - 135Mbps | |
ath0: MCS 8-15: 27Mbps - 270Mbps | |
ath0: 11ng MCS 40MHz SGI: | |
ath0: MCS 0-7: 15Mbps - 150Mbps | |
ath0: MCS 8-15: 30Mbps - 300Mbps | |
ath0: AR9130 mac 20.1 RF2133 phy 10.2 | |
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00d0 | |
ath0: Use hw queue 1 for WME_AC_BE traffic | |
ath0: Use hw queue 0 for WME_AC_BK traffic | |
ath0: Use hw queue 2 for WME_AC_VI traffic | |
ath0: Use hw queue 3 for WME_AC_VO traffic | |
ath0: Use hw queue 8 for CAB traffic | |
ath0: Use hw queue 9 for beacons | |
ath0: using multicast key search | |
random: harvesting attach, 8 bytes (4 bits) from ath0 | |
Device configuration finished. | |
Timecounters tick every 1.000 msec | |
lo0: bpf attached | |
vlan: initialized, using hash tables with chaining | |
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 | |
rtl8366rb0port0: link state changed to DOWN | |
rtl8366rb0port1: link state changed to DOWN | |
rtl8366rb0port2: link state changed to DOWN | |
rtl8366rb0port3: link state changed to DOWN | |
rtl8366rb0port4: link state changed to DOWN | |
GEOM: new disk cfid0 | |
usbus0: 480Mbps High Speed USB v2.0 | |
MAP: cfid0: 0x40000, data=0x40000 "/dev/map/uboot" | |
MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/uboot_environ" | |
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000 | |
ugen0.1: <Atheros EHCI root HUB> at usbus0 | |
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
MAP: cfid0: 60000x150000, data=0x150000 "/dev/map/kernel" | |
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000 | |
MAP: cfid0: 1b0000x1e10000, data=0x1e10000 "/dev/map/rootfs" | |
MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/config" | |
MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/ART" | |
MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade" | |
MAP: No valid partition found at map/rootfs.uzip | |
Trying to mount root from cd9660:/dev/map/rootfs.uzip []... | |
cd9660: RockRidge Extension | |
warning: no time-of-day clock registered, system time will not be set accurately | |
start_init: trying /sbin/init | |
uhub0: 1 port with 1 removable, self powered | |
random: harvesting attach, 8 bytes (4 bits) from uhub0 | |
rtl8366rb0port0: link state changed to UP | |
Shared object "libxo.so.0" not found, required by "ps" | |
KLD unionfs.ko: depends on kernel - not available or version mismatch | |
linker_load_file: Unsupported file type | |
mount_unionfs: /etc: : Operation not supported by device | |
Shared object "libxo.so.0" not found, required by "ps" | |
256+0 records in | |
256+0 records out | |
131072 bytes transferred in 0.144193 secs (909005 bytes/sec) | |
tar: Error opening archive: Unrecognized archive format | |
/etc/rc.restore_config: pwd_mkdb: not found | |
cap_mkdb: /etc/login.conf.db: Read-only file system | |
eval: gpioctl: not found | |
eval: gpioctl: not found | |
eval: gpioctl: not found | |
kern.hintmode: 1 -> 2 | |
kern.coredump: 1 -> 0 | |
net.inet.ip.forwarding: 0 -> 1 | |
debug.kdb.break_to_debugger: 1 -> 1 | |
Shared object "lib80211.so.1" not found, required by "ifconfig" | |
eval: syslogd: not found | |
eval: mpd: not found | |
eval: inetd: not found | |
random: unblocking device. | |
Generating public/private rsa1 key pair. | |
Saving key "/etc/ssh/ssh_host_key" failed: unknown or unsupported key type | |
Generating public/private dsa key pair. | |
Saving key "/etc/ssh/ssh_host_dsa_key" failed: Read-only file system | |
Generating public/private rsa key pair. | |
Saving key "/etc/ssh/ssh_host_rsa_key" failed: Read-only file system | |
/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/cron |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment