Created
February 19, 2014 22:26
-
-
Save rcsheets/9102971 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.2 2013-07-26 r3841 [FreeBSD 10.0-RELEASE amd64] (local build) | |
| Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: SandForce Driven SSDs | |
| Device Model: KINGSTON SKC300S37A60G | |
| Serial Number: 50026B723A0593C8 | |
| LU WWN Device Id: 5 0026b7 23a0593c8 | |
| Firmware Version: 507KC4 | |
| User Capacity: 60,022,480,896 bytes [60.0 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Wed Feb 19 14:25:56 2014 PST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART STATUS RETURN: incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 48) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x0021) SCT Status supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 110 110 050 Pre-fail Always - 0/29802228 | |
| 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 | |
| 9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 688h+48m+14.500s | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 | |
| 13 Soft_Read_Error_Rate 0x000a 042 042 000 Old_age Always - 4242728/29802228 | |
| 100 Gigabytes_Erased 0x0032 000 000 000 Old_age Always - 2311 | |
| 170 Reserve_Block_Count 0x0032 000 000 000 Old_age Always - 1728 | |
| 171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0 | |
| 172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 | |
| 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 6 | |
| 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0 | |
| 181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0 | |
| 182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 | |
| 184 IO_Error_Detect_Code_Ct 0x0032 100 100 090 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 189 Airflow_Temperature_Cel 0x0000 026 028 000 Old_age Offline - 26 (Min/Max 23/28) | |
| 194 Temperature_Celsius 0x0022 026 028 000 Old_age Always - 26 (Min/Max 23/28) | |
| 195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/29802228 | |
| 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 | |
| 198 Uncorrectable_Sector_Ct 0x0010 110 110 000 Old_age Offline - 0/13025012 | |
| 199 SATA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/29802228 | |
| 204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/29802228 | |
| 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 | |
| 231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0 | |
| 232 Available_Reservd_Space 0x0000 000 000 000 Old_age Offline - 6 | |
| 233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 187 | |
| 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 89 | |
| 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 89 | |
| 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 14 | |
| SMART Error Log not supported | |
| SMART Self-test Log not supported | |
| SMART Selective self-test log data structure revision number 0 | |
| Note: revision number not 1 implies that no selective self-test has ever been run | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment