fosdem-11ag log on PYNQSDR

gistfile1.txt

root@analog:~# ./openwifi/fosdem-11ag.sh 
hostapd: no process found
network-manager stop/waiting
num_arg  0
last_input xxxxxxxxx
test_mode 0
rmmod: ERROR: Module sdr is not currently loaded
rmmod: ERROR: Module tx_intf is not currently loaded
check tx_intf module is loaded or not
tx_intf is loaded!
set RF frontend
Found openwifi_ad9361_fir.ftr
+ test -f /sys/bus/iio/devices/iio:device0/in_voltage_rf_bandwidth
+ test -f /sys/bus/iio/devices/iio:device1/in_voltage_rf_bandwidth
+ cd /sys/bus/iio/devices/iio:device1/
+ set +x
FIR Rx: 32,1 Tx: 32,1
1
0
rx0 agc fast_attack
slow_attack
fast_attack
rx1 agc fast_attack
cat: in_voltage1_gain_control_mode: No such file or directory
./rf_init.sh: 75: ./rf_init.sh: cannot create in_voltage1_gain_control_mode: Permission denied
cat: in_voltage1_gain_control_mode: No such file or directory
40000000
17500000
40000000
37500000
rssi
106.25 dB
cat: in_voltage1_rssi: No such file or directory
rx0 gain to 70
56.000000 dB
sh: echo: I/O error
56.000000 dB
rx1 gain to 70
cat: in_voltage1_hardwaregain: No such file or directory
./rf_init.sh: 99: ./rf_init.sh: cannot create in_voltage1_hardwaregain: Permission denied
cat: in_voltage1_hardwaregain: No such file or directory
tx0 gain -89dB(0 override)
-10.000000 dB
0.000000 dB
tx1 gain 0dB
cat: out_voltage1_hardwaregain: No such file or directory
./rf_init.sh: 111: ./rf_init.sh: cannot create out_voltage1_hardwaregain: Permission denied
cat: out_voltage1_hardwaregain: No such file or directory
rmmod: ERROR: Module rx_intf is not currently loaded
check rx_intf module is loaded or not
rx_intf is loaded!
rmmod: ERROR: Module openofdm_tx is not currently loaded
check openofdm_tx module is loaded or not
openofdm_tx is loaded!
rmmod: ERROR: Module openofdm_rx is not currently loaded
check openofdm_rx module is loaded or not
openofdm_rx is loaded!
rmmod: ERROR: Module xpu is not currently loaded
check xpu module is loaded or not
xpu is loaded!
rmmod: ERROR: Module sdr is not currently loaded
insert sdr.ko test_mode=0
check sdr module is loaded or not
sdr is loaded!
the end
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0840000
zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
xuartps e0000000.serial: No serial alias passed. Using the first free id
xuartps e0000000.serial: Checking id 0
e0000000.serial: ttyPS1 at MMIO 0xe0000000 (irq = 25, base_baud = 6250000) is a xuartps
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
FPGA manager framework
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
workingset: timestamp_bits=30 max_order=17 bucket_order=0
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.dmac: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
brd: module loaded
loop: module loaded
m25p80 spi1.0: found s25fl128s, expected n25q256a
m25p80 spi1.0: s25fl128s (16384 Kbytes)
6 ofpart partitions found on MTD device spi1.0
Creating 6 MTD partitions on "spi1.0":
0x000000000000-0x0000000e0000 : "qspi-fsbl-uboot"
0x0000000e0000-0x000000100000 : "qspi-uboot-env"
0x000000100000-0x000000600000 : "qspi-linux"
0x000000600000-0x000000620000 : "qspi-device-tree"
0x000000620000-0x000001300000 : "qspi-rootfs"
mtd: partition "qspi-rootfs" extends beyond the end of device "spi1.0" -- size truncated to 0x9e0000
0x000001300000-0x000002000000 : "qspi-bitstream"
mtd: partition "qspi-bitstream" is out of reach -- disabled
MACsec IEEE 802.1AE
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 28 (00:0a:35:00:01:22)
Generic PHY e000b000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.ethernet-ffffffff:00, irq=POLL)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
chipidea-usb2 e0002000.usb: e0002000.usb supply vbus not found, using dummy regulator
ULPI transceiver vendor/product ID 0x0451/0x1507
Found TI TUSB1210 ULPI transceiver.
ULPI integrity check: passed.
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
gspca_main: v2.14.0 registered
cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer at e083e000 with timeout 10s
Xilinx Zynq CpuIdle Driver started
failed to register cpuidle driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ad7291: probe of 0-0020 failed with error -5
ad7291: probe of 0-002c failed with error -5
fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 17
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
Waiting for root device /dev/mmcblk0p2...
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SU16G 14.8 GiB 
 mmcblk0: p1 p2 p3
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 1024K
init: hwclock main process (919) terminated with status 1
systemd-udevd[1010]: starting version 204
ad9361 spi0.0: ad9361_probe : enter (ad9361)
Registered mathworks_ip class
xilinx-vdma 80400000.dma: Xilinx AXI DMA Engine Driver Probed!!
xilinx-vdma 80410000.dma: Xilinx AXI DMA Engine Driver Probed!!
mwipcore 43c00000.mwipcore: Dev memory resource found at 43c00000 0000FFFF. 
mwipcore 43c00000.mwipcore: 'mwipcore' device not found, creating
mwipcore 43c00000.mwipcore: Char dev region registered: major num:242
mwipcore 43c00000.mwipcore: 'mwipcore' device created
ad9361 spi0.0: ad9361_probe : AD936x Rev 2 successfully initialized
init: udev-fallback-graphics main process (1410) terminated with status 1
init: Failed to open system console: No such device
cf_axi_adc 79020000.cf-ad9361-lpc: ADI AIM (10.01.b) at 0x79020000 mapped to 0xe0e18000, probed ADC AD9364 as MASTER
init: Failed to open system console: No such device
cf_axi_dds 79024000.cf-ad9361-dds-core-lpc: Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x79024000 mapped to 0xe19f3000, probed DDS AD9361
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Segment Routing with IPv6
init: Failed to open system console: No such device
init: failsafe main process (1520) killed by TERM signal
init: Failed to open system console: No such device
init: samba-ad-dc main process (1712) terminated with status 1
init: alsa-restore main process (1802) terminated with status 19
init: isc-dhcp-server main process (1799) terminated with status 1
init: isc-dhcp-server main process ended, respawning
macb e000b000.ethernet eth0: link up (1000/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: isc-dhcp-server main process (1935) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: lightdm main process (1748) terminated with status 1
init: tty1 main process (1972) killed by TERM signal
init: isc-dhcp-server main process (2000) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2067) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2116) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2144) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2155) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2163) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2171) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2179) terminated with status 1
init: isc-dhcp-server main process ended, respawning
init: isc-dhcp-server main process (2187) terminated with status 1
init: isc-dhcp-server respawning too fast, stopped
init: auto-serial-console main process (1966) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2226) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2229) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2232) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2235) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2238) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2242) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2245) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2248) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2251) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2254) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2257) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2261) terminated with status 1
init: auto-serial-console main process ended, respawning
random: crng init done
init: auto-serial-console main process (2264) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2267) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2270) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2273) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2276) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2280) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2283) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2286) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2289) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2292) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2295) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2299) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2302) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2305) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2308) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2311) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2314) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2318) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2321) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2324) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2327) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2330) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2333) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2337) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2340) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2343) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2346) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2349) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2352) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2356) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2359) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2362) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2365) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2368) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2371) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2375) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2378) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2381) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2384) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2387) terminated with status 1
init: auto-serial-console main process ended, respawning
SAMPL CLK: 30720000 tuning: RX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:o o o o o o o o O o o o o o o o 
1:o o o # # # # # # # # # # # # # 
SAMPL CLK: 30720000 tuning: TX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:# # # # # # o o o o o O o o o o 
1:# # # # # # # # # # # # # # # # 
init: auto-serial-console main process (2391) terminated with status 1
init: auto-serial-console main process ended, respawning
SAMPL CLK: 25000000 tuning: RX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:o o o o o o o o o o o o o o o o 
1:o o o # # # # # # # # # # # # # 
SAMPL CLK: 40000000 tuning: RX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:o o o o o o o o o o o o o o o o 
1:o o o # # # # # # # # # # # # # 
SAMPL CLK: 61440000 tuning: RX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:o o o o o o o o o o o # # # # # 
1:o o o # # # # # # # # # # # # # 
SAMPL CLK: 61440000 tuning: RX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:o o o o o O o o o o o # # # # # 
1:o o o # # # # # # # # # # # # # 
SAMPL CLK: 25000000 tuning: TX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:# # # # # # o o o o o o o o o o 
1:# # # # # # # # # # # # # # # # 
SAMPL CLK: 40000000 tuning: TX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:# # # # # # o o o o o o o o o o 
1:# # # # # # # # # # # # # # # # 
SAMPL CLK: 61440000 tuning: TX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:# # # # # # o o o o o o o # # # 
1:# # # # # # # # # # # # # # # # 
SAMPL CLK: 61440000 tuning: TX
  0:1:2:3:4:5:6:7:8:9:a:b:c:d:e:f:
0:# # # # # # o o o O o o o # # # 
1:# # # # # # # # # # # # # # # # 
init: auto-serial-console main process (2395) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2399) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2402) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2405) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2408) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2411) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2415) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2418) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2422) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2425) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2428) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2431) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2435) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2438) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2441) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2444) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2447) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2451) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2455) terminated with status 1
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process (2459) terminated with status 1
init: auto-serial-console main process ended, respawning
tx_intf: loading out-of-tree module taints kernel.

sdr,tx_intf dev_probe match!
sdr,tx_intf dev_probe io start 0x83c00000 end 0x83c0ffff name /fpga-axi@0/tx_intf@83c00000 flags 0x00000200 desc 0x00000000
sdr,tx_intf dev_probe base_addr 0xe3940000
sdr,tx_intf dev_probe tx_intf_driver_api_inst 0xbf1b9284
sdr,tx_intf dev_probe             tx_intf_api 0xbf1b9284
sdr,tx_intf dev_probe succeed!
sdr,tx_intf hw_init mode 6
sdr,tx_intf hw_init mode TX_INTF_BW_20MHZ_AT_N_10MHZ_ANT1
sdr,tx_intf hw_init err 0

sdr,rx_intf dev_probe match!
sdr,rx_intf dev_probe io start 0x83c20000 end 0x83c2ffff name /fpga-axi@0/rx_intf@83c20000 flags 0x00000200 desc 0x00000000
sdr,rx_intf dev_probe base_addr 0xe3980000
sdr,rx_intf dev_probe rx_intf_driver_api_inst 0xbf1c2284
sdr,rx_intf dev_probe             rx_intf_api 0xbf1c2284
sdr,rx_intf dev_probe succeed!
sdr,rx_intf hw_init mode 2
sdr,rx_intf hw_init mode DDC_BW_20MHZ_AT_0MHZ
sdr,rx_intf hw_init err 0

sdr,openofdm_tx dev_probe match!
sdr,openofdm_tx dev_probe io start 0x83c10000 end 0x83c1ffff name /fpga-axi@0/openofdm_tx@83c10000 flags 0x00000200 desc 0x00000000
sdr,openofdm_tx dev_probe base_addr 0xe39c0000
sdr,openofdm_tx dev_probe openofdm_tx_driver_api_inst 0xbf1cb284
sdr,openofdm_tx dev_probe             openofdm_tx_api 0xbf1cb284
sdr,openofdm_tx dev_probe succeed!
sdr,openofdm_tx hw_init mode 1
sdr,openofdm_tx hw_init mode OPENOFDM_TX_NORMAL
sdr,openofdm_tx hw_init err 0

sdr,openofdm_rx dev_probe match!
sdr,openofdm_rx dev_probe io start 0x83c30000 end 0x83c3ffff name /fpga-axi@0/openofdm_rx@83c30000 flags 0x00000200 desc 0x00000000
sdr,openofdm_rx dev_probe base_addr 0xe3a00000
sdr,openofdm_rx dev_probe openofdm_rx_driver_api_inst 0xbf1d3284
sdr,openofdm_rx dev_probe             openofdm_rx_api 0xbf1d3284
sdr,openofdm_rx dev_probe succeed!
sdr,openofdm_rx hw_init mode 1
sdr,openofdm_rx hw_init mode OPENOFDM_RX_NORMAL
sdr,openofdm_rx hw_init input:
power_thres 0
min_plateau 100
sdr,openofdm_rx hw_init err 0

sdr,xpu dev_probe match!
sdr,xpu dev_probe io start 0x83c40000 end 0x83c4ffff name /fpga-axi@0/xpu@83c40000 flags 0x00000200 desc 0x00000000
sdr,xpu dev_probe base_addr 0xe3a60000
sdr,xpu dev_probe xpu_driver_api_inst 0xbf1dc284
sdr,xpu dev_probe             xpu_api 0xbf1dc284
sdr,xpu dev_probe reset tsf timer
sdr,xpu dev_probe XPU_REG_TSF_RUNTIME_VAL_LOW_read 1 33752 100760us
sdr,xpu dev_probe succeed!
sdr,xpu hw_init mode 1
sdr,xpu hw_init mode XPU_NORMAL
sdr,xpu hw_init err 0
sdr: no symbol version for openofdm_rx_api

sdr,sdr openwifi_dev_probe: match!
sdr,sdr custom_match_spi_dev ad9361-phy ad9361-phy 1
sdr,sdr bus_find_device ad9361-phy: ad9361. driver_data pointer d60ed810
sdr,sdr ad9361_spi_to_phy ad9361-phy: ad9361
sdr,sdr openwifi_dev_probe: ad9361_ctrl_outs_setup en_mask 0xff index 0x16
sdr,sdr openwifi_dev_probe: ad9361_spi_read REG_CTRL_OUTPUT_POINTER 0x16
sdr,sdr openwifi_dev_probe: ad9361_spi_read REG_CTRL_OUTPUT_ENABLE 0xff
sdr,sdr custom_match_platform_dev 79024000.cf-ad9361-dds-core-lpc
sdr,sdr openwifi_dev_probe: cf-ad9361-dds-core-lpc dds_st->version 00090162 chip_info->name AD9361
sdr,sdr openwifi_dev_probe: cf_axi_dds_datasel DATA_SEL_DMA
sdr,sdr openwifi_dev_probe: priv->rf_bw == 40000000Hz. bool for 20000000 0, 40000000 1
sdr,sdr openwifi_dev_probe: test_mode 0
sdr,sdr openwifi_dev_probe: rfkill radio on
sdr,sdr openwifi_dev_probe: band_2GHz.n_channels 14 n_bitrates 12 band_5GHz.n_channels 11 n_bitrates 12
sdr,sdr openwifi_dev_probe: mac_addr 66:55:44:33:22:68
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
sdr,sdr openwifi_dev_probe: ieee80211_register_hw 0
ieee80211 phy0: hwaddr 665544332268, ZYNQ + ad9361
sdr,sdr openwifi_rfkill_init: wireless switch is on
sdr,sdr fpga-axi@0:sdr sdr0: renamed from wlan0
stop: Unknown instance: 
isc-dhcp-server start/running, process 2616
Configuration file: hostapd-openwifi-11ag.conf
sdr0: interface state UNINITIALIZED->COUNTRY_UPDATE
Using interface sdr0 with hwaddr 66:55:44:33:22:68 and ssid "openwifi"
sdr0: interface state COUNTRY_UPDATE->ENABLED
sdr0: AP-ENABLED 
root@analog:~#