Skip to content

Instantly share code, notes, and snippets.

@reidt1
Created December 1, 2023 21:08
Show Gist options
  • Save reidt1/159604ae43c31ec4181f3a8df70375c4 to your computer and use it in GitHub Desktop.
Save reidt1/159604ae43c31ec4181f3a8df70375c4 to your computer and use it in GitHub Desktop.
successful boot
U-Boot SPL 2024.01-rc3-00030-ge2d7c746106 (Dec 01 2023 - 14:54:59 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
Trying to boot from MMC2
Loading Environment from nowhere... OK
Starting ATF on ARM64 core...
NOTICE: BL31: v2.10.0 (debug):v2.10.0-22-g5305809a7
NOTICE: BL31: Built : 14:37:55, Dec 1 2023
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 991
INFO: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a72: CPU workaround for erratum 1319367 was applied
INFO: BL31: cortex_a72: CPU workaround for CVE 2018_3639 was applied
INFO: BL31: cortex_a72: CPU workaround for CVE 2022_23960 was applied
ERROR: Failed to get response (-19)
ERROR: Transfer send failed (-19)
ERROR: Unable to query firmware capabilities (-19)
INFO: BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 4.0.0-114-g082788858 (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #1 Fri Dec 1 20:37:59 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x80080000
INFO: SPSR = 0x3c9
U-Boot SPL 2024.01-rc3-00030-ge2d7c746106 (Dec 01 2023 - 14:55:00 -0600)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
Detected: J7X-BASE-CPB rev A
Detected: J7X-VSC8514-ETH rev E2
Trying to boot from MMC2
U-Boot 2024.01-rc3-00030-ge2d7c746106 (Dec 01 2023 - 14:55:00 -0600)
SoC: J7200 SR2.0 GP
Model: Texas Instruments J7200 EVM
Board: J7200X-PM2-SOM rev E8
DRAM: 4 GiB
Core: 91 devices, 32 uclasses, devicetree: separate
Flash: 0 Bytes
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev A
Detected: J7X-VSC8514-ETH rev E2
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
574 bytes read in 9 ms (61.5 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc1 ...
20367872 bytes read in 217 ms (89.5 MiB/s)
59224 bytes read in 12 ms (4.7 MiB/s)
Working FDT set to 88000000
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008feee000, end 000000008fffffff ... OK
Working FDT set to 8feee000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 6.1.46-g5892b80d6b (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Nov 27 16:11:04 UTC 2023
[ 0.000000] Machine model: Texas Instruments J7200 EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a47fffff]
[ 0.000000] node 0: [mem 0x00000000a4800000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 19 pages/cpu s38376 r8192 d31256 u77824
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs) root=PARTUUID=3ac9738a-02 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
[ 0.000000] Memory: 3896388K/4194304K available (12352K kernel code, 1266K rwdata, 4028K rodata, 2112K init, 432K bss, 265148K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000880030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880040000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008352] Console: colour dummy device 80x25
[ 0.012916] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023588] pid_max: default: 32768 minimum: 301
[ 0.028324] LSM: Security Framework initializing
[ 0.033101] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.040678] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.049486] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.056891] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.063158] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.070544] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.076865] rcu: Hierarchical SRCU implementation.
[ 0.081763] rcu: Max phase no-delay instances is 1000.
[ 0.087275] Platform MSI: msi-controller@1820000 domain created
[ 0.093428] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.102786] EFI services will not be available.
[ 0.107519] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.120674] Detected PIPT I-cache on CPU1
[ 0.120738] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.120753] GICv3: CPU1: using allocated LPI pending table @0x0000000880050000
[ 0.120786] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.120833] smp: Brought up 1 node, 2 CPUs
[ 0.150182] SMP: Total of 2 processors activated.
[ 0.154987] CPU features: detected: 32-bit EL0 Support
[ 0.160241] CPU features: detected: CRC32 instructions
[ 0.165522] CPU: All CPU(s) started at EL2
[ 0.169704] alternatives: applying system-wide alternatives
[ 0.176237] devtmpfs: initialized
[ 0.183736] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.193709] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.201286] pinctrl core: initialized pinctrl subsystem
[ 0.206965] DMI not present or invalid.
[ 0.211209] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.217808] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.225120] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.233154] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.241277] audit: initializing netlink subsys (disabled)
[ 0.246876] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
[ 0.247064] thermal_sys: Registered thermal governor 'step_wise'
[ 0.254797] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.260955] cpuidle: using governor menu
[ 0.271694] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.278656] ASID allocator initialised with 65536 entries
[ 0.290458] KASLR disabled due to lack of seed
[ 0.297894] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.304857] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.311264] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.318211] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.324634] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.331569] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.337971] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.344905] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.352080] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected
[ 0.361283] iommu: Default domain type: Translated
[ 0.366275] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.372803] SCSI subsystem initialized
[ 0.376809] usbcore: registered new interface driver usbfs
[ 0.382431] usbcore: registered new interface driver hub
[ 0.387868] usbcore: registered new device driver usb
[ 0.393202] pps_core: LinuxPPS API ver. 1 registered
[ 0.398274] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.407612] PTP clock support registered
[ 0.411681] EDAC MC: Ver: 3.0.0
[ 0.415324] FPGA manager framework
[ 0.418833] Advanced Linux Sound Architecture Driver Initialized.
[ 0.425481] clocksource: Switched to clocksource arch_sys_counter
[ 0.431830] VFS: Disk quotas dquot_6.6.0
[ 0.435858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.445868] NET: Registered PF_INET protocol family
[ 0.451216] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.460271] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.469046] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.476975] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.485206] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.493971] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.500812] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.507740] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.515186] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.521254] RPC: Registered named UNIX socket transport module.
[ 0.527319] RPC: Registered udp transport module.
[ 0.532123] RPC: Registered tcp transport module.
[ 0.536926] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.543509] NET: Registered PF_XDP protocol family
[ 0.548410] PCI: CLS 0 bytes, default 64
[ 0.552762] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.561834] Initialise system trusted keyrings
[ 0.566492] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.575166] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.581471] NFS: Registering the id_resolver key type
[ 0.586664] Key type id_resolver registered
[ 0.590936] Key type id_legacy registered
[ 0.595056] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.601905] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.628976] Key type asymmetric registered
[ 0.633162] Asymmetric key parser 'x509' registered
[ 0.638170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.645818] io scheduler mq-deadline registered
[ 0.650456] io scheduler kyber registered
[ 0.656133] pinctrl-single 4301c000.pinctrl: 13 pins, size 52
[ 0.662146] pinctrl-single 4301c038.pinctrl: 2 pins, size 8
[ 0.667936] pinctrl-single 4301c068.pinctrl: 59 pins, size 236
[ 0.673971] pinctrl-single 4301c174.pinctrl: 8 pins, size 32
[ 0.679893] pinctrl-single 11c000.pinctrl: 67 pins, size 268
[ 0.685744] pinctrl-single 11c11c.pinctrl: 3 pins, size 12
[ 0.691762] pinctrl-single a40000.pinctrl: 512 pins, size 2048
[ 0.700613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.710818] loop: module loaded
[ 0.714541] megasas: 07.719.03.00-rc1
[ 0.719635] tun: Universal TUN/TAP device driver, 1.6
[ 0.725100] thunder_xcv, ver 1.0
[ 0.728418] thunder_bgx, ver 1.0
[ 0.731726] nicpf, ver 1.0
[ 0.734554] e1000: Intel(R) PRO/1000 Network Driver
[ 0.739538] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.745422] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.750492] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.756554] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.762068] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.767769] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.774172] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.780272] sky2: driver version 1.30
[ 0.784323] VFIO - User Level meta-driver version: 0.3
[ 0.789941] usbcore: registered new interface driver usb-storage
[ 0.796360] i2c_dev: i2c /dev entries driver
[ 0.801263] sdhci: Secure Digital Host Controller Interface driver
[ 0.807586] sdhci: Copyright(c) Pierre Ossman
[ 0.812212] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.818261] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.824488] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.831200] usbcore: registered new interface driver usbhid
[ 0.836896] usbhid: USB HID core driver
[ 0.841277] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.845838] optee: revision 4.0 (08278885)
[ 0.862264] optee: dynamic shared memory is enabled
[ 0.871658] optee: initialized driver
[ 0.876437] Initializing XFRM netlink socket
[ 0.880826] NET: Registered PF_PACKET protocol family
[ 0.886024] Key type dns_resolver registered
[ 0.890581] registered taskstats version 1
[ 0.894781] Loading compiled-in X.509 certificates
[ 0.905904] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
[ 0.928923] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 0.935267] pca953x 1-0021: supply vcc not found, using dummy regulator
[ 0.942105] pca953x 1-0021: using no AI
[ 0.969893] pca953x 1-0020: supply vcc not found, using dummy regulator
[ 0.976704] pca953x 1-0020: using no AI
[ 0.981239] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 0.988042] pca953x 1-0022: using AI
[ 0.992330] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz
[ 0.998449] pca953x 2-0020: supply vcc not found, using dummy regulator
[ 1.005303] pca953x 2-0020: using no AI
[ 1.029798] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.035559] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created
[ 1.044096] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created
[ 1.053426] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created
[ 1.062027] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created
[ 1.071788] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235
[ 1.081683] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 1.088442] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 1.098175] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211
[ 1.108335] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 1.115094] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 1.122693] pinctrl-single 4301c000.pinctrl: mux offset out of range: 0xf8 (0x34)
[ 1.130346] pinctrl-single 4301c000.pinctrl: could not add functions for mcu-uart0-pins-default 248x
[ 1.140029] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 251, base_baud = 6000000) is a 8250
[ 1.149518] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 252, base_baud = 3000000) is a 8250
[ 1.158364] printk: console [ttyS2] enabled
[ 1.158364] printk: console [ttyS2] enabled
[ 1.166808] printk: bootconsole [ns16550a0] disabled
[ 1.166808] printk: bootconsole [ns16550a0] disabled
[ 1.177215] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 253, base_baud = 3000000) is a 8250
[ 1.187033] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.233491] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.242070] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.250345] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.263187] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.270395] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.276591] pps pps0: new PPS source ptp0
[ 1.280741] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1
[ 1.291060] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[ 1.302575] mmc0: CQHCI version 5.10
[ 1.342043] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 1.437804] mmc0: Command Queue Engine enabled
[ 1.442275] mmc0: new HS400 MMC card at address 0001
[ 1.447911] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 1.453610] mmcblk0: p1 p2 p3
[ 1.457148] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[ 1.463024] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[ 1.468639] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (240:0)
[ 1.608716] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0
[ 1.614721] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock
[ 1.652888] vdd_core_0v85: Bringing 800000uV into 850000-850000uV
[ 1.774998] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc8900
[ 1.781817] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc8900
[ 1.789569] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 1.799498] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8)
[ 1.813682] spi-nor spi0.0: s28hs512t (65536 Kbytes)
[ 1.818737] 7 cmdlinepart partitions found on MTD device 47040000.spi.0
[ 1.825355] Creating 7 MTD partitions on "47040000.spi.0":
[ 1.830885] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[ 1.837422] 0x000000080000-0x000000280000 : "ospi.tispl"
[ 1.843641] 0x000000280000-0x000000680000 : "ospi.u-boot"
[ 1.850176] 0x000000680000-0x0000006a0000 : "ospi.env"
[ 1.855371] mtd: partition "ospi.env" doesn't end on an erase/write block -- force read-only
[ 1.864725] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[ 1.870484] mtd: partition "ospi.env.backup" doesn't start on an erase/write block boundary -- force read-only
[ 1.881469] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[ 1.887411] 0x000000800000-0x000004000000 : "ospi.rootfs"
[ 1.894113] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.937496] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.946248] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.954525] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.967398] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.974635] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.981343] pps pps0: new PPS source ptp1
[ 1.985504] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1
[ 1.996537] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[ 2.005753] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present!
[ 2.013365] mmc1: CQHCI version 5.10
[ 2.016660] ALSA device list:
[ 2.019929] No soundcards found.
[ 2.057953] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[ 2.065627] Waiting for root device PARTUUID=3ac9738a-02...
[ 2.125805] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 2.133074] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[ 2.142037] mmcblk1: p1 p2
[ 2.162786] EXT4-fs (mmcblk1p2): recovery complete
[ 2.167591] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 2.176158] VFS: Mounted root (ext4 filesystem) on device 179:98.
[ 2.184787] devtmpfs: mounted
[ 2.189247] Freeing unused kernel memory: 2112K
[ 2.193899] Run /sbin/init as init process
[ 2.344948] systemd[1]: System time before build time, advancing clock.
[ 2.384147] NET: Registered PF_INET6 protocol family
[ 2.390502] Segment Routing with IPv6
[ 2.394242] In-situ OAM (IOAM) with IPv6
[ 2.421049] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 2.452589] systemd[1]: Detected architecture arm64.
Welcome to Arago 2023.10!
[ 2.528372] systemd[1]: Hostname set to <j7200-evm>.
[ 2.610073] systemd-sysv-generator[147]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 2.639200] systemd-sysv-generator[147]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 2.664055] systemd-sysv-generator[147]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 2.883553] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.937896] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 3.001197] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.041351] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 3.063063] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 3.087175] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 3.111307] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 3.133864] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 3.157859] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 3.181969] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 3.197648] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 3.217623] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 3.233644] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ 3.287011] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 3.309745] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 3.337832] systemd[1]: Listening on Process Core Dump Socket.
[ OK ] Listening on Process Core Dump Socket.
[ 3.357930] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 3.382281] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 3.406076] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 3.430123] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 3.446259] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 3.470200] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 3.489974] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 3.510026] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 3.557903] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 3.577919] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 3.629932] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 3.645835] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 3.666090] systemd[1]: Mounting Temporary Directory /tmp...
Mounting Temporary Directory /tmp...
[ 3.687492] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 3.714006] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 3.734182] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 3.752793] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 3.770705] fuse: init (API version 7.37)
[ 3.773993] systemd[1]: Starting RPC Bind...
Starting RPC Bind...
[ 3.794005] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 3.830363] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 3.851927] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 3.871628] cryptodev: loading out-of-tree module taints kernel.
[ 3.873028] systemd[1]: Starting Generate network units from Kernel command line...
Starting Generate network …ts from Kernel co[ 3.888847] cryptodev: driver 1.12 loaded.
mmand line...
[ 3.908457] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 3.933090] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
[ 3.951029] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 3.979120] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 3.998075] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Generate network units from Kernel command line.
[ OK ] Finished Remount Root and Kernel File Systems.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
[ 4.318723] systemd-journald[162]: Received client request to flush runtime journal.
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /media/ram...
Mounting /var/volatile...
[ 4.566810] audit: type=1334 audit(1651167747.220:2): prog-id=5 op=LOAD
[ 4.573978] audit: type=1334 audit(1651167747.228:3): prog-id=6 op=LOAD
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Mounted /media/ram.
[ OK ] Mounted /var/volatile.
Starting Load/Save Random Seed...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 4.924291] random: crng init done
[ OK ] Finished Load/Save Random Seed.
[ 4.948969] j721e-pcie-host 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges:
[ 4.957239] j721e-pcie-host 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000
[ 4.965817] j721e-pcie-host 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000
[ 4.974346] j721e-pcie-host 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000
[ OK ] Found device /dev/ttyS2.
[ 5.068546] ti-udma 285c0000.dma-controller: chan1: is running!
[ 5.237914] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[ 5.262428] platform 41000000.r5f: configured R5F for IPC-only mode
[ 5.277657] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000
[ 5.342464] remoteproc remoteproc0: 41000000.r5f is available
[ 5.413072] remoteproc remoteproc0: attaching to 41000000.r5f
[ 5.488005] platform 41000000.r5f: R5F core initialized in IPC-only mode
[ 5.562034] rproc-virtio rproc-virtio.10.auto: assigned reserved memory node r5f-dma-memory@a0000000
[ 5.607221] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 5.621409] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
[ 5.629786] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
[ 5.657400] rproc-virtio rproc-virtio.10.auto: registered virtio0 (type 7)
[ 5.666059] remoteproc remoteproc0: remote processor 41000000.r5f is now attached
[ 5.710451] platform 5c00000.r5f: configured R5F for remoteproc mode
[ 5.724845] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000
[ 5.736146] remoteproc remoteproc1: 5c00000.r5f is available
[ 5.747792] platform 5d00000.r5f: configured R5F for remoteproc mode
[ 5.755935] remoteproc remoteproc1: powering up 5c00000.r5f
[ 5.761696] remoteproc remoteproc1: Booting fw image j7200-main-r5f0_0-fw, size 73624
[ 5.777959] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000
[ 5.786022] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node r5f-dma-memory@a2000000
[ 5.797024] virtio_rpmsg_bus virtio1: rpmsg host is online
[ 5.803582] rproc-virtio rproc-virtio.11.auto: registered virtio1 (type 7)
[ 5.810496] remoteproc remoteproc1: remote processor 5c00000.r5f is now up
[ 5.818753] remoteproc remoteproc2: 5d00000.r5f is available
[ 5.824497] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd
[ 5.832114] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe
[ 5.844214] remoteproc remoteproc2: powering up 5d00000.r5f
[ 5.850057] remoteproc remoteproc2: Booting fw image j7200-main-r5f0_1-fw, size 73624
[ 5.860874] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node r5f-dma-memory@a3000000
[ 5.872166] virtio_rpmsg_bus virtio2: rpmsg host is online
[ 5.878306] rproc-virtio rproc-virtio.12.auto: registered virtio2 (type 7)
[ 5.886590] remoteproc remoteproc2: remote processor 5d00000.r5f is now up
[ 5.893624] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd
[ 5.901778] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe
[ 6.001671] j721e-pcie-host 2910000.pcie: PCI host bridge to bus 0000:00
[ 6.013106] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.019995] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x18001000-0x18010fff])
[ 6.042751] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff]
[ 6.061825] pci 0000:00:00.0: [104c:b00f] type 01 class 0x060400
[ 6.089136] pci 0000:00:00.0: supports D1
[ 6.099441] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 6.118479] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit]
[ 6.140722] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs)
[ 6.158341] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 6.188650] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 6.198695] pci 0000:00:00.0: BAR 7: assigned [mem 0x18400000-0x193fffff 64bit]
[ 6.206731] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 6.214238] pcieport 0000:00:00.0: PME: Signaling with IRQ 690
[ 6.243883] pcieport 0000:00:00.0: AER: enabled with IRQ 690
[ OK ] Created slice Slice /system/systemd-fsck.
[ OK ] Found device /dev/mmcblk0p3.
Starting File System Check on /dev/mmcblk0p3...
[ OK ] Found device /dev/mmcblk0p2.
[ OK ] Found device /dev/mmcblk0p1.
Starting File System Check on /dev/mmcblk0p1...
Starting File System Check on /dev/mmcblk0p2...
[ OK ] Found device /dev/disk/by-uuid/0DBA-DE52.
Mounting /boot...
[ 6.892345] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ OK ] Mounted /boot.
[ OK ] Finished File System Check on /dev/mmcblk0p1.
Mounting /run/media/mmcblk0p1...
[ OK ] Finished File System Check on /dev/mmcblk0p2.
Mounting /run/media/mmcblk0p2...
[ OK ] Mounted /run/media/mmcblk0p1.
[ OK ] Mounted /run/media/mmcblk0p2.
[ OK ] Finished File System Check on /dev/mmcblk0p3.
Mounting /run/media/mmcblk0p3...
[ OK ] Mounted /run/media/mmcblk0p3.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timer Units.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Docker Socket for the API...
[ OK ] Listening on dropbear.socket.
[ OK ] Listening on PC/SC Smart Card Daemon Activation Socket.
Starting Weston socket...
Starting D-Bus System Message Bus...
Starting Reboot and dump vmcore via kexec...
[ OK ] Listening on Docker Socket for the API.
[ OK ] Listening on Weston socket.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Finished Reboot and dump vmcore via kexec.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
[ OK ] Started Job spooling tools.
[ OK ] Started Periodic Command Scheduler.
Starting Print notice about GPLv3 packages...
Starting IPv6 Packet Filtering Framework...
Starting IPv4 Packet Filtering Framework...
[ OK ] Started irqbalance daemon.
Starting Lighttpd Daemon...
[ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf.
[ 8.073664] audit: type=1334 audit(1651167750.728:4): prog-id=7 op=LOAD
[ 8.082007] audit: type=1334 audit(1651167750.732:5): prog-id=8 op=LOAD
Starting User Login Management...
[ OK ] Started TEE Supplicant.
Starting Telnet Server...
[FAILED] Failed to start Print notice about GPLv3 packages.
See 'systemctl status gplv3-notice.service' for details.
[ OK ] Finished IPv6 Packet Filtering Framework.
[ OK ] Finished IPv4 Packet Filtering Framework.
[ OK ] Started Lighttpd Daemon.
[ OK ] Finished Telnet Server.
[ OK ] Started User Login Management.
[ OK ] Reached target Preparation for Network.
Starting Network Configuration...
[ OK ] Listening on Load/Save RF …itch S[ 8.407518] cfg80211: Loading compiled-in X.509 certificates for regulatory database
tatus /dev/rfkill Watch.
[ 8.427270] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ OK ] Started Network Configuration.
[ 8.485554] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 8.495080] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
Starting Network Name Resolution...
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
Starting Avahi mDNS/DNS-SD Stack...
Starting Enable and configure wl18xx bluetooth stack...
Starting containerd container runtime...
[ OK ] Started Netperf Benchmark Server.
[ OK ] Started NFS status monitor for NFSv2/3 locking..
Starting Permit User Sessions...
[FAILED] Failed to start Enable and…figure wl18xx bluetooth stack.
See 'systemctl status bt-enable.service' for details.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS2.
[ OK ] Reached target Login Prompts.
Starting Synchronize System and HW clocks...
Starting Weston, a Wayland…ositor, as a system service...
[ 9.273708] audit: type=1334 audit(1651167751.924:6): prog-id=9 op=LOAD
[ 9.282682] audit: type=1334 audit(1651167751.936:7): prog-id=10 op=LOAD
Starting User Database Manager...
[ OK ] Finished Synchronize System and HW clocks.
[ OK ] Started User Database Manager.
[ OK ] Created slice User Slice of UID 1000.
Starting User Runtime Directory /run/user/1000...
[ OK ] Finished User Runtime Directory /run/user/1000.
Starting User Manager for UID 1000...
[ 9.559435] audit: type=1006 audit(1651167752.212:8): pid=752 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 9.572068] audit: type=1300 audit(1651167752.212:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe02c3b78 a2=4 a3=ffffaa3f9020 items=0 ppid=1 pid=752 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 9.599945] audit: type=1327 audit(1651167752.212:8): proctitle="(systemd)"
[ OK ] Started User Manager for UID 1000.
[ OK ] Started Session c1 of User weston.
[ OK ] Started containerd container runtime.
[ 10.028347] audit: type=1006 audit(1651167752.680:9): pid=742 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
[ 10.040726] audit: type=1300 audit(1651167752.680:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe02c3b78 a2=4 a3=ffffaa3f9020 items=0 ppid=1 pid=742 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null)
[ 10.067468] audit: type=1327 audit(1651167752.680:9): proctitle="(weston)"
[FAILED] Failed to start Weston, a …mpositor, as a system service.
See 'systemctl status weston.service' for details.
[DEPEND] Dependency failed for Matrix GUI.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Record Runlevel Change in UTMP...
[ OK ] Finished Record Runlevel Change in UTMP.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project j7200-evm -
Arago 2023.10 j7200-evm -
j7200-evm login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment