j7200 boot log

gistfile1.txt

U-Boot SPL 2023.10-rc4-00497-g0309cd393d (Oct 02 2023 - 16:14:09 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Trying to boot from MMC2
Loading Environment from nowhere... OK
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9(release):v2.9.0-dirty
NOTICE:  BL31: Built : 14:12:59, May 22 2023
I/TC: 
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2023.10-rc4-00497-g0309cd393d (Oct 02 2023 - 16:14:23 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Detected: J7X-BASE-CPB rev A
Detected: J7X-VSC8514-ETH rev E2
Trying to boot from MMC2


U-Boot 2023.10-rc4-00497-g0309cd393d (Oct 02 2023 - 16:14:23 -0500)

SoC:   J7200 SR2.0 GP
Model: Texas Instruments J7200 EVM
Board: J7200X-PM2-SOM rev E8
DRAM:  4 GiB
Core:  91 devices, 32 uclasses, devicetree: separate
Flash: 0 Bytes
MMC:   mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev A
Detected: J7X-VSC8514-ETH rev E2
Net:   eth0: ethernet@46000000port@1
Hit any key to stop autoboot:  0 
=> 
=> 
=> version 
U-Boot 2023.10-rc4-00497-g0309cd393d (Oct 02 2023 - 16:14:23 -0500)