Created
July 6, 2015 13:15
-
-
Save remimu/c7a869449d32d597c22f to your computer and use it in GitHub Desktop.
S.M.A.R.T # smartctl -a device
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build) | |
| Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Crucial/Micron MX100/M500/M510/M550 Client SSDs | |
| Device Model: Crucial_CT512MX100SSD1 | |
| Serial Number: 14440DA2BD0B | |
| LU WWN Device Id: 5 00a075 10da2bd0b | |
| Firmware Version: MU01 | |
| User Capacity: 512 110 190 592 bytes [512 GB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Mon Jul 6 15:12:48 2015 CEST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x80) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 2380) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 6) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 3) minutes. | |
| SCT capabilities: (0x0035) SCT Status supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 | |
| 5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3627 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 317 | |
| 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 173 Ave_Block-Erase_Count 0x0032 100 100 000 Old_age Always - 7 | |
| 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 253 | |
| 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 4403 | |
| 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 | |
| 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 194 Temperature_Celsius 0x0022 072 052 000 Old_age Always - 28 (Min/Max 13/48) | |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 202 Percent_Lifetime_Used 0x0031 100 100 000 Pre-fail Offline - 0 | |
| 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 | |
| 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 | |
| 246 Total_Host_Sector_Write 0x0032 100 100 000 Old_age Always - 6940080802 | |
| 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 217628408 | |
| 248 Bckgnd_Program_Page_Cnt 0x0032 100 100 000 Old_age Always - 74609693 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Vendor (0xff) Completed without error 00% 3606 - | |
| # 2 Vendor (0xff) Completed without error 00% 3583 - | |
| # 3 Vendor (0xff) Completed without error 00% 3548 - | |
| # 4 Vendor (0xff) Completed without error 00% 3478 - | |
| # 5 Vendor (0xff) Completed without error 00% 3356 - | |
| # 6 Vendor (0xff) Completed without error 00% 3300 - | |
| # 7 Vendor (0xff) Completed without error 00% 3270 - | |
| # 8 Vendor (0xff) Completed without error 00% 3213 - | |
| # 9 Vendor (0xff) Completed without error 00% 3167 - | |
| #10 Vendor (0xff) Completed without error 00% 898 - | |
| #11 Vendor (0xff) Completed without error 00% 878 - | |
| #12 Vendor (0xff) Completed without error 00% 865 - | |
| #13 Vendor (0xff) Completed without error 00% 801 - | |
| #14 Vendor (0xff) Completed without error 00% 732 - | |
| #15 Vendor (0xff) Completed without error 00% 698 - | |
| #16 Vendor (0xff) Completed without error 00% 640 - | |
| #17 Vendor (0xff) Completed without error 00% 571 - | |
| #18 Vendor (0xff) Completed without error 00% 468 - | |
| #19 Vendor (0xff) Completed without error 00% 426 - | |
| #20 Vendor (0xff) Completed without error 00% 393 - | |
| #21 Vendor (0xff) Completed without error 00% 360 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment