Skip to content

Instantly share code, notes, and snippets.

@rgstephens

rgstephens/install_rasa.sh

Last active January 8, 2025 15:27
Download ZIP

Revisions

  1. rgstephens revised this gist Nov 8, 2019. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion install_rasa.sh
    View file
    Original file line number Diff line number Diff line change
    @@ -108,12 +108,12 @@ python3.6 -m pip install . --user
    # Installing dopamine-rl
    cd ~/dopamine
    sed -i '/opencv-python/d' setup.py
    sed -i '/dopamine-rl/d' setup.py
    python3.6 -m pip install . --user

    # Installing tensor2tensor
    cd ~/tensor2tensor
    sed -i '/opencv-python/d' setup.py
    sed -i '/dopamine-rl/d' setup.py
    python3.6 -m pip install . --user --force-reinstall

    # Installing other RASA dependencies
  2. rgstephens created this gist Nov 8, 2019.
    136 changes: 136 additions & 0 deletions install_rasa.sh
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,136 @@
    # Update the Raspberry Pi
    sudo apt-get update
    sudo apt-get upgrade -y
    sudo apt-get dist-upgrade -y

    # Install initial build dependencies
    # Provides
    # Enables pip3.6 to access pypi
    sudo apt-get install libbz2-dev libssl-dev -y

    # Get and install Python3.6
    wget https://www.python.org/ftp/python/3.6.8/Python-3.6.8.tar.xz
    tar -xvf Python-3.6.8.tar.xz
    cd Python-3.6.8
    sudo ./configure
    sudo make -j4
    sudo make install

    # Update Python3.6 packages
    python3.6 -m pip install --upgrade pip setuptools --user

    # Install additional dependencies
    # Enables access to Tensorflow whl
    # Dependency for the h5py python package
    sudo apt-get install python3-pip libhdf5-dev -y

    # Install Tensorflow
    python3.6 -m pip install tensorflow==1.14.0 --user

    # Install OpenCV Dependencies
    sudo apt-get install build-essential cmake unzip pkg-config -y
    sudo apt-get install libjpeg-dev libpng-dev libtiff-dev -y
    sudo apt-get install libavcodec-dev libavformat-dev libswscale-dev libv4l-dev -y
    sudo apt-get install libxvidcore-dev libx264-dev -y
    sudo apt-get install libgtk-3-dev -y
    sudo apt-get install libcanberra-gtk* -y
    sudo apt-get install libatlas-base-dev gfortran -y
    sudo apt-get install python3-dev -y

    # Download OpenCV and clarify naming scheme
    cd ~
    wget -O opencv.zip https://github.com/opencv/opencv/archive/4.0.0.zip
    wget -O opencv_contrib.zip https://github.com/opencv/opencv_contrib/archive/4.0.0.zip
    unzip opencv.zip
    unzip opencv_contrib.zip
    mv opencv-4.0.0 opencv
    mv opencv_contrib-4.0.0 opencv_contrib

    cd ~/opencv
    mkdir build
    cd build

    cmake -D CMAKE_BUILD_TYPE=RELEASE \
    -D CMAKE_INSTALL_PREFIX=/usr/local \
    -D OPENCV_EXTRA_MODULES_PATH=~/opencv_contrib/modules \
    -D ENABLE_NEON=ON \
    -D ENABLE_VFPV3=ON \
    -D BUILD_TESTS=OFF \
    -D OPENCV_ENABLE_NONFREE=ON \
    -D INSTALL_PYTHON_EXAMPLES=OFF \
    -D BUILD_EXAMPLES=OFF ..

    # Increasing swap size to make OpenCV
    SWAPSIZE=2048
    sed -i "s/^CONF_SWAPSIZE.*/CONF_SWAPSIZE=${SWAPSIZE}/" /etc/dphys-swapfile

    # Restarting swap service
    sudo /etc/init.d/dphys-swapfile stop
    sudo /etc/init.d/dphys-swapfile start

    # Make OpenCV
    make -j4

    # Install OpenCV
    sudo make install
    sudo ldconfig

    # Reseting swap size
    SWAPSIZE=100
    sed -i "s/^CONF_SWAPSIZE.*/CONF_SWAPSIZE=${SWAPSIZE}/" /etc/dphys-swapfile

    # Restarting swap service
    sudo /etc/init.d/dphys-swapfile stop
    sudo /etc/init.d/dphys-swapfile start

    # Link cv2 to Python3.6
    cd /usr/local/lib/python3.6/site-packages/
    sudo ln -s /usr/local/python/cv2/python-3.6/cv2.cpython-36m-arm-linux-gnueabihf.so cv2.so

    # In case git is not installed
    sudo apt-get install git -y

    # Getting codebases for spaCy, tensor2tensor, and RASA
    # NOTE: This is hard-coded for rasa-1.4.0 right now - let's make it more elegant soon
    cd ~
    git clone https://github.com/explosion/spaCy
    git clone https://github.com/tensorflow/tensor2tensor
    git clone https://github.com/google/dopamine.git
    wget https://github.com/RasaHQ/rasa/archive/1.4.0.zip && unzip 1.4.0.zip

    # Installing spaCy
    export BLIS_ARCH=generic
    cd ~/spaCy
    python3.6 -m pip install -r requirements.txt --user
    python3.6 setup.py build_ext --inplace
    python3.6 -m pip install . --user

    # Installing dopamine-rl
    cd ~/dopamine
    sed -i '/opencv-python/d' setup.py
    sed -i '/dopamine-rl/d' setup.py
    python3.6 -m pip install . --user

    # Installing tensor2tensor
    cd ~/tensor2tensor
    sed -i '/opencv-python/d' setup.py
    python3.6 -m pip install . --user --force-reinstall

    # Installing other RASA dependencies
    sudo apt install libpq-dev/buster -y
    python3.6 -m pip install psycopg2 --user

    # Installing RASA
    cd ~/rasa-1.4.0
    sed -i '/tensor2tensor/d' setup.py
    sed -i '/tensor2tensor/d' requirements.txt
    python3.6 -m pip install -r requirements.txt --user --force-reinstall
    python3.6 -m pip install . --user --force-reinstall

    # Script exit
    echo ""
    echo ""
    echo "------------------------------------------------------------"
    echo "Congratulations! Rasa is now installed on your Raspberry Pi."
    echo "To test rasa out, run python3.6 -m rasa init and start "
    echo "creating your bot!"