Flask apps are bound to port 5000 by default. To bind it to port 80, you would need to change the port as follows:
if __name__ == '__main__':
app.run(host='0.0.0.0', port=80, debug=True)And to run it:
robinjodon rjodon
justinmklam
/ flask-port80-without-sudo.md
Last active
November 6, 2023 20:51
Run a flask app on port 80 without sudo.
G-UK
/ Raspberry Pi 4 Arm64 Kernel Cross-Compile.md
Last active
August 24, 2023 13:31
Building the Raspberry Pi 4 Arm64 Linux Kernel
The Raspberry Pi foundation have now released a beta version of an official 64-bit Kernel which can be installed using the rpi-update script. The rpi-update script can be found at https://github.com/Hexxeh/rpi-update/blob/master/rpi-update or through the Raspbian repositories
The objective of these instructions is to build a stock 64bit Linux Kernel for use on the Raspberry Pi 4B on a Debian x64 machine (Windows Subsystem for Linux in my case), and deploy on the Raspberry Pi.
Notes:
- Transfer to Pi is using my NAS in this example, replace with shared drive/memory stick etc. as required.
- (N: drive on Windows and /mnt/NAS on Linux in this example).
- For a specific Kernel version replace the 4.19 with the wanted version in the git clone command.
- Greater than 3GB RAM only currently available on Kernel 4.19