-
-
Save rla/a9f4b074dd54a641d056f42846046c6e to your computer and use it in GitHub Desktop.
Ketaste SMART väljundid
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.5.7-un-def-alt1] (ALT Linux 6.5-alt1) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: SAMSUNG SpinPoint P120 | |
Device Model: SAMSUNG SP2014N | |
Serial Number: S088J1SYA10095 | |
Firmware Version: VC100-33 | |
User Capacity: 200,048,565,760 bytes [200 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a | |
Local Time is: Sun Mar 5 15:47:42 2017 UTC | |
==> WARNING: May need -F samsung3 enabled; see manual for details. | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 4592) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 76) minutes. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5888 | |
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8591 | |
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 | |
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 | |
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 15735 | |
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 | |
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2617 | |
190 Airflow_Temperature_Cel 0x0022 124 094 000 Old_age Always - 38 | |
194 Temperature_Celsius 0x0022 124 094 000 Old_age Always - 38 | |
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1922899 | |
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 | |
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 15734 - | |
# 2 Abort offline test Aborted by host 90% 3431 - | |
SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.9.0-0.bpo.1-amd64] (local build) | |
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Black | |
Device Model: WDC WD1003FZEX-00MK2A0 | |
Serial Number: WD-WCC3FNUDRX9H | |
LU WWN Device Id: 5 0014ee 2b50b9014 | |
Firmware Version: 01.01A01 | |
User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 7200 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Mon Feb 27 13:37:42 2017 EET | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x84) Offline data collection activity | |
was suspended by an interrupting command from host. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (11760) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 122) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x3035) SCT Status supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 173 171 021 Pre-fail Always - 2316 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 45 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 18249 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 45 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 23 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 71 | |
194 Temperature_Celsius 0x0022 108 108 000 Old_age Always - 35 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.9.0-0.bpo.1-amd64] (local build) | |
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red (AF) | |
Device Model: WDC WD10EFRX-68FYTN0 | |
Serial Number: WD-WCC4J1JE0692 | |
LU WWN Device Id: 5 0014ee 20ca7ff07 | |
Firmware Version: 82.00A82 | |
User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Wed Mar 1 13:12:00 2017 EET | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (13620) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 155) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 135 135 021 Pre-fail Always - 4225 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4865 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 3 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 333 | |
194 Temperature_Celsius 0x0022 109 109 000 Old_age Always - 34 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.9.0-0.bpo.1-amd64] (local build) | |
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red (AF) | |
Device Model: WDC WD10EFRX-68FYTN0 | |
Serial Number: WD-WCC4J7URE0FH | |
LU WWN Device Id: 5 0014ee 2b7bddc55 | |
Firmware Version: 82.00A82 | |
User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Tue Feb 28 11:47:38 2017 EET | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: (12720) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 146) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 137 137 021 Pre-fail Always - 4125 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4864 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 2 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 332 | |
194 Temperature_Celsius 0x0022 119 109 000 Old_age Always - 24 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment