Script to set up a NetBSD install to my liking

newnetbsd.sh

#!/bin/sh
#
# newnetbsd.sh - set up a fresh NetBSD install
#
# Prereq:
#   - During install:
#       - Configure your network
#       - Install pkgin ("Enable installation of binary packages")
#       - Fetch/unpack pkgsrc
#       - Run ntpdate at boot
#   - After install:
#       - Install wget (pkgin in wget)
#       - Create a new user for yourself, add it to group `wheel`
#       - Install sudo (pkgin in sudo)
#       - Allow users in `wheel` to run all commands (visudo)
# 
# Usage:
#   $ wget --no-check-certificate https://gist.github.com/rnelson/5575619/raw/newnetbsd.sh
#   $ chmod +x newnetbsd.sh
#   $ ./newnetbsd.sh


# Install some development tools
echo "Installing development tools"
yes Y | sudo pkgin install g95 clang gcc47 mono openjdk7 pcc python27 python33 ruby distcc distcc-pump >/dev/null




# Install a shell
echo "Installing ZSH"
yes Y | sudo pkgin in zsh >/dev/null




# Change to that shell
echo "Changing shell to /usr/pkg/bin/zsh"
chsh -s /usr/pkg/bin/zsh




# Add some entries to /etc/rc.conf
echo "rpcbind=YES" >> /etc/rc.conf
echo "distccd=YES" >> /etc/rc.conf




# Write some scripts to ~/bin
echo "Creating some helper scripts"
mkdir ~/bin
touch ~/bin/installgnome.sh
echo "#!/bin/sh" > ~/bin/installgnome.sh
echo "pkgin in gnome gnome-admin gnome-devtools c++-gnome-bindings mono-gnome-bindings \\" >> ~/bin/installgnome.sh
echo "  p5-gnome-bindings py-gnome-bindings && \\" >> ~/bin/installgnome.sh
echo "echo \"PKG_DEVELOPER=YES\" >> /etc/mk.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"ALLOW_VULNERABLE_PACKAGES=YES\" >> /etc/mk.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"ACCEPTABLE_LICENSES+= lame-license\" >> /etc/mk.conf && \\" >> ~/bin/installgnome.sh
echo "pkgin in cups cups-pdf foomatic-filters-cups foomatic-ppds-cups gnome-mount \\" >> ~/bin/installgnome.sh
echo "  gst-plugins0.10-x264 gst-plugins0.10-faad gst-plugins0.10-resindvd gst-plugins0.10-a52 \\" >> ~/bin/installgnome.sh
echo "  telepathy-mission-control5 telepathy-idle xscreensaver xscreensaver-demo xlockmore && \\" >> ~/bin/installgnome.sh
echo "cd /usr/pkgsrc/multimedia/gst-plugins0.10-ffmpeg && make install clean distclean && \\" >> ~/bin/installgnome.sh
echo "cd /usr/pkgsrc/audio/gst-plugins0.10-faad && make install clean distclean && \\" >> ~/bin/installgnome.sh
echo "cd /usr/pkgsrc/audio/gst-plugins0.10-fluendo-mp3 && make install clean distclean && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/distccd /etc/rc.d && chmod 0755 /etc/rc.d/distccd && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/dirmngr /etc/rc.d && chmod 0755 /etc/rc.d/dirmngr && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/avahidaemon /etc/rc.d && chmod 0755 /etc/rc.d/avahidaemon && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/famd /etc/rc.d && chmod 0755 /etc/rc.d/famd && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/dbus /etc/rc.d && chmod 0755 /etc/rc.d/dbus && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/hal /etc/rc.d && chmod 0755 /etc/rc.d/hal && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/slpd /etc/rc.d && chmod 0755 /etc/rc.d/slpd && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/winbindd /etc/rc.d && chmod 0755 /etc/rc.d/winbindd && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/smbd /etc/rc.d && chmod 0755 /etc/rc.d/smbd && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/samba /etc/rc.d && chmod 0755 /etc/rc.d/samba && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/nmbd /etc/rc.d && chmod 0755 /etc/rc.d/nmbd && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/gdm /etc/rc.d && chmod 0755 /etc/rc.d/gdm && \\" >> ~/bin/installgnome.sh
echo "cp /usr/pkg/share/examples/rc.d/cupsd /etc/rc.d && chmod 0755 /etc/rc.d/cupsd && \\" >> ~/bin/installgnome.sh
echo "cd /dev && sh MAKEDEV drvctl && \\" >> ~/bin/installgnome.sh
echo "touch /usr/pkg/etc/dirmngr/ldapservers.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"winbindd=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"smbd=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"slpd=NO\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"samba=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"nmbd=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"dbus=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"hal=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"gdm=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"famd=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"dirmngr=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"cupsd=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"avahidaemon=YES\" >> /etc/rc.conf && \\" >> ~/bin/installgnome.sh
echo "echo \"export LC_MESSAGES=en_US.UTF-8\" >> /etc/profile" >> ~/bin/installgnome.sh

# Get the current system and X source code; note: this downloads -CURRENT, so modify
# it to get a specific release if desired
echo "#!/bin/sh" > ~/bin/getsource.sh
echo "export CVS_RSH=\"ssh\"" >> ~/bin/getsource.sh
echo "export CVSROOT=\"anoncvs@anoncvs.NetBSD.org:/cvsroot\"" >> ~/bin/getsource.sh
echo "(cd /usr && cvs checkout -A -P src)" >> ~/bin/getsource.sh
echo "(cd /usr && cvs checkout -A -P xsrc)" >> ~/bin/getsource.sh

# Update the system and X source code
echo "#!/bin/sh" > ~/bin/updatesource.sh
echo "export CVS_RSH=\"ssh\"" >> ~/bin/updatesource.sh
echo "export CVSROOT=\"anoncvs@anoncvs.NetBSD.org:/cvsroot\"" >> ~/bin/updatesource.sh
echo "(cd /usr/src && cvs update -A -Pd)" >> ~/bin/updatesource.sh
echo "(cd /usr/xsrc && cvs update -A -Pd)" >> ~/bin/updatesource.sh
echo "(cd /usr/pkgsrc && cvs update -A -Pd)" >> ~/bin/updatesource.sh

# Step 1 of the system rebuild process
echo "#!/bin/sh" >> ~/bin/build1.sh
echo "(cd /usr/src && ./build.sh -O ../obj -T ../tools distribution)" >> ~/bin/build1.sh
echo "(cd /usr/src && ./build.sh -O ../obj -T ../tools kernel=GENERIC)" >> ~/bin/build1.sh
echo "mv /netbsd /netbsd.old" >> ~/bin/build1.sh
echo "mv /usr/obj/sys/arch/`uname -m`/compile/GENERIC/netbsd /" >> ~/bin/build1.sh
echo "/sbin/shutdown -r now" >> ~/bin/build1.sh

# Step 2 of the system rebuild process
echo "#!/bin/sh" >> ~/bin/build2.sh
echo "(cd /usr/src && ./build.sh -O ../obj -T ../tools install=/)" >> ~/bin/build2.sh
echo "/usr/sbin/etcupdate -s /usr/src" >> ~/bin/build2.sh
echo "/sbin/shutdown -r now" >> ~/bin/build2.sh




# Make those scripts executable
chmod +x ~/bin/*.sh




# Run getsource to download system and X source code
echo "Downloading system source code"
sudo ~/bin/getsource.sh >/dev/null




# Print the completion message
echo ""
echo "Initial setup complete."
echo ""
echo "To rebuild the system to -CURRENT, run 'sudo ~/bin/build1.sh' and,"
echo "after that reboots, 'sudo ~/bin/build2.sh'"
echo ""
echo "To install GNOME and set up GDM, run 'sudo ~/bin/installgnome.sh'"