Created
June 4, 2022 09:59
-
-
Save robimarko/5f12728df848caa4ace5c41a12304ed7 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
admin@rt5010w-d350:~# dmesg | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 4.4.60 (dailybuild@PG2-DB60-BS) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 0a3a4f0+r49254) ) #1 SMP PREEMPT Thu Mar 24 02:58:16 CST 2022 | |
[ 0.000000] Boot CPU: AArch64 Processor [410fd034] | |
[ 0.000000] Ignoring memory range 0x40000000 - 0x41000000 | |
[ 0.000000] Machine: Askey RT5010W-D350/REV0 | |
[ 0.000000] efi: Getting EFI parameters from FDT: | |
[ 0.000000] efi: UEFI not found. | |
[ 0.000000] Reserved memory: OVERLAP DETECTED! | |
[ 0.000000] wifi_dump@51100000 (0x0000000051100000--0x0000000051700000) overlaps with wigig_dump@51300000 (0x0000000051300000--0x0000000051700000) | |
[ 0.000000] On node 0 totalpages: 228608 | |
[ 0.000000] DMA zone: 3572 pages used for memmap | |
[ 0.000000] DMA zone: 0 pages reserved | |
[ 0.000000] DMA zone: 228608 pages, LIFO batch:31 | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.0 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4e000 s20736 r8192 d32512 u61440 | |
[ 0.000000] pcpu-alloc: s20736 r8192 d32512 u61440 alloc=15*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225036 | |
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs uboot-version=0.0.1-1-80112-CS rootwait swiotlb=1 coherent_pool=2M | |
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.000000] software IO TLB [mem 0x7fe05000-0x7fe45000] (0MB) mapped at [ffffffc03ee05000-ffffffc03ee44fff] | |
[ 0.000000] Memory: 886296K/914432K available (5364K kernel code, 613K rwdata, 2324K rodata, 224K init, 464K bss, 28136K reserved, 0K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) | |
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) | |
[ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc1000000 ( 15 MB actual) | |
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) | |
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) | |
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) | |
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB) | |
[ 0.000000] .init : 0xffffffc000804000 - 0xffffffc00083c000 ( 224 KB) | |
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000804000 ( 7696 KB) | |
[ 0.000000] .data : 0xffffffc00084b000 - 0xffffffc0008e4400 ( 613 KB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 64. | |
[ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
[ 0.000422] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) | |
[ 0.000434] pid_max: default: 32768 minimum: 301 | |
[ 0.000522] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) | |
[ 0.000532] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) | |
[ 0.001184] EFI services will not be available. | |
[ 0.001210] ASID allocator initialised with 65536 entries | |
[ 0.051979] MSM Memory Dump base table set up | |
[ 0.052000] MSM Memory Dump apps data table set up | |
[ 0.090074] Detected VIPT I-cache on CPU1 | |
[ 0.090119] CPU1: Booted secondary processor [410fd034] | |
[ 0.120060] Detected VIPT I-cache on CPU2 | |
[ 0.120090] CPU2: Booted secondary processor [410fd034] | |
[ 0.150087] Detected VIPT I-cache on CPU3 | |
[ 0.150115] CPU3: Booted secondary processor [410fd034] | |
[ 0.150165] Brought up 4 CPUs | |
[ 0.150190] SMP: Total of 4 processors activated. | |
[ 0.150199] CPU: All CPU(s) started at EL1 | |
[ 0.150223] alternatives: patching kernel code | |
[ 0.167574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.167600] futex hash table entries: 1024 (order: 5, 131072 bytes) | |
[ 0.167902] pinctrl core: initialized pinctrl subsystem | |
[ 0.168806] NET: Registered protocol family 16 | |
[ 0.190017] cpuidle: using governor ladder | |
[ 0.220035] cpuidle: using governor menu | |
[ 0.220256] NET: Registered protocol family 42 | |
[ 0.220361] vdso: 2 pages (1 code @ ffffffc000851000, 1 data @ ffffffc000850000) | |
[ 0.220392] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
[ 0.221041] DMA: preallocated 2048 KiB pool for atomic allocations | |
[ 0.221176] CPU: IPQ8072A, SoC Version: 2.0 | |
[ 0.221600] IPC logging disabled | |
[ 0.221606] IPC logging disabled | |
[ 0.221610] IPC logging disabled | |
[ 0.221615] IPC logging disabled | |
[ 0.221619] IPC logging disabled | |
[ 0.223392] gpiochip_add: registered GPIOs 0 to 69 on device: 1000000.pinctrl | |
[ 0.223404] GPIO chip 1000000.pinctrl: created GPIO range 0->69 ==> 1000000.pinctrl PIN 0->69 | |
[ 0.224225] Soc version is not 1, changing clock offsets | |
[ 0.233094] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! | |
[ 0.235411] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ! | |
[ 0.238812] sps:sps is ready. | |
[ 0.243873] spmi spmi-0: PMIC Arb Version-2 (0x20010000) | |
[ 0.250277] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 | |
[ 0.250577] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 | |
[ 0.281072] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/soc/dummy-regulator@0[0]' | |
[ 0.281279] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed-regulator@0[0]' | |
[ 0.281973] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.281981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ 0.282004] PTP clock support registered | |
[ 0.283389] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.284042] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.287196] NET: Registered protocol family 2 | |
[ 0.287804] TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 0.287912] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) | |
[ 0.288097] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.288150] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.288187] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.288356] NET: Registered protocol family 1 | |
[ 0.288398] PCI: CLS 0 bytes, default 128 | |
[ 0.288814] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available | |
[ 0.296406] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.296424] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 0.299685] Key type asymmetric registered | |
[ 0.299701] Asymmetric key parser 'x509' registered | |
[ 0.299731] io scheduler noop registered | |
[ 0.299744] io scheduler deadline registered (default) | |
[ 0.305956] msm_rpm_log_probe: OK | |
[ 0.306282] msm-dcc b3000.dcc: DCC XPU is not specified | |
[ 0.306530] msm-dcc b3000.dcc: jiffies_64: 0xffff8aee, cntvct_64: 0xcc762f7 | |
[ 0.306542] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff8000584004) | |
[ 0.306553] msm-dcc b3000.dcc: gcnt_lo: 0x0cc764cf(0xffffff8000584000) | |
[ 0.307106] TZ SMMU State: SMMU Stage2 Enabled | |
[ 0.307163] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set | |
[ 0.308752] msm_serial 78b1000.serial: msm_serial: detected port #0 | |
[ 0.308796] msm_serial 78b1000.serial: uartclk = 19200000 | |
[ 0.308832] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM | |
[ 0.308850] msm_serial: console setup on port #0 | |
[ 0.977354] console [ttyMSM0] enabled | |
[ 0.982426] msm_serial: driver initialized | |
[ 0.985960] msm_serial_hsl_init: driver initialized | |
[ 0.997915] brd: module loaded | |
[ 0.998520] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 | |
[ 1.000684] spi_qup 78b8000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 | |
[ 1.008500] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 0, 0 | |
[ 1.014903] QPIC controller hw version Major:1, Minor:5 | |
[ 1.020715] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa | |
[ 1.025604] nand: ONFI 10-Compliant Micron MT29F2G08ABBGAH4 | |
[ 1.032150] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 | |
[ 1.037562] 25 ofpart partitions found on MTD device qcom_nand.0 | |
[ 1.045097] Creating 25 MTD partitions on "qcom_nand.0": | |
[ 1.051336] 0x000000000000-0x000000100000 : "0:SBL1" | |
[ 1.058082] 0x000000100000-0x000000200000 : "0:MIBIB" | |
[ 1.062921] 0x000000200000-0x000000280000 : "0:BOOTCONFIG" | |
[ 1.067530] 0x000000280000-0x000000300000 : "0:BOOTCONFIG1" | |
[ 1.072878] 0x000000300000-0x000000600000 : "0:QSEE" | |
[ 1.080229] 0x000000600000-0x000000900000 : "0:QSEE_1" | |
[ 1.085459] 0x000000900000-0x000000980000 : "0:DEVCFG" | |
[ 1.088486] 0x000000980000-0x000000a00000 : "0:DEVCFG_1" | |
[ 1.093621] 0x000000a00000-0x000000a80000 : "0:APDP" | |
[ 1.099106] 0x000000a80000-0x000000b00000 : "0:APDP_1" | |
[ 1.104056] 0x000000b00000-0x000000b80000 : "0:RPM" | |
[ 1.108973] 0x000000b80000-0x000000c00000 : "0:RPM_1" | |
[ 1.113750] 0x000000c00000-0x000000c80000 : "0:CDT" | |
[ 1.119003] 0x000000c80000-0x000000d00000 : "0:CDT_1" | |
[ 1.123671] 0x000000d00000-0x000000d80000 : "0:APPSBLENV" | |
[ 1.128904] 0x000000d80000-0x000000e80000 : "0:APPSBL" | |
[ 1.134625] 0x000000e80000-0x000000f80000 : "0:APPSBL_1" | |
[ 1.139652] 0x000000f80000-0x000001000000 : "0:ART" | |
[ 1.144761] 0x000001000000-0x000007100000 : "rootfs" | |
[ 1.220012] mtd: device 18 (rootfs) set to be root filesystem | |
[ 1.220273] mtdsplit: no squashfs found in "rootfs" | |
[ 1.224750] 0x000007100000-0x000007a00000 : "0:WIFIFW_1" | |
[ 1.236632] 0x000007a00000-0x00000db00000 : "rootfs_1" | |
[ 1.308106] 0x00000db00000-0x00000e400000 : "0:WIFIFW" | |
[ 1.315377] 0x00000e400000-0x00000fa00000 : "ubifs" | |
[ 1.332160] 0x00000fa00000-0x00000fa80000 : "0:ETHPHYFW" | |
[ 1.333162] 0x00000fa80000-0x00000fd00000 : "certificate" | |
[ 1.339835] libphy: Fixed MDIO Bus: probed | |
[ 1.342413] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[0]' - status (0) | |
[ 1.562481] of_get_named_gpiod_flags: parsed 'phy-reset-gpio' property of node '/soc/mdio@90000[1]' - status (0) | |
[ 1.782535] of_get_named_gpiod_flags: can't parse 'phy-reset-gpio' property of node '/soc/mdio@90000[2]' | |
[ 1.782546] qca-mdio 90000.mdio: Could not find phy-reset-gpio | |
[ 1.782670] libphy: qca_mdio: probed | |
[ 1.788644] qca-mdio 90000.mdio: qca-mdio driver was registered | |
[ 1.791196] Unable to create IPC log context! | |
[ 1.796921] Skip QCA8074V1 in V2 platform | |
[ 1.801409] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc03cdb0018 tgt 0xfffe | |
[ 1.805394] i2c /dev entries driver | |
[ 1.821691] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com | |
[ 1.822147] sdhci: Secure Digital Host Controller Interface driver | |
[ 1.829243] sdhci: Copyright(c) Pierre Ossman | |
[ 1.835213] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 1.840299] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed | |
[ 1.845424] ICE IRQ = 82 | |
[ 1.854493] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000 | |
[ 1.856194] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000 | |
[ 1.873289] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000 | |
[ 1.889185] sps:BAM 0x0000000008b04000 is registered.<6>[ 1.898988] remoteproc remoteproc0: releasing cd00000.qcom_q6v5_wcss | |
[ 1.902429] SPMI VADC - Min ch: 0 Max ch: 15 | |
[ 1.909688] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000 | |
[ 1.912171] coresight-csr 6001000.csr: CSR initialized | |
[ 1.919661] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000 | |
[ 1.924612] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000 | |
[ 1.932116] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000 | |
[ 1.939513] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000 | |
[ 1.946881] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000 | |
[ 1.954263] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000 | |
[ 1.961625] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000 | |
[ 1.969033] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000 | |
[ 1.976398] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000 | |
[ 1.983758] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000 | |
[ 1.991158] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000 | |
[ 1.998535] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000 | |
[ 2.005915] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000 | |
[ 2.013278] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000 | |
[ 2.020667] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000 | |
[ 2.028049] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000 | |
[ 2.035426] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000 | |
[ 2.042803] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000 | |
[ 2.050240] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000 | |
[ 2.057578] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000 | |
[ 2.064959] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000 | |
[ 2.072484] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000 | |
[ 2.079559] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000 | |
[ 2.096651] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000 | |
[ 2.112537] sps:BAM 0x0000000006044000 is registered.<6>[ 2.120287] coresight-tmc 6028000.tmc: TMC initialized | |
[ 2.125005] coresight-tmc 6027000.tmc: TMC initialized | |
[ 2.130128] coresight-funnel 6021000.funnel: FUNNEL initialized | |
[ 2.135165] coresight-funnel 6100000.funnel: FUNNEL initialized | |
[ 2.140963] coresight-funnel 6120000.funnel: FUNNEL initialized | |
[ 2.146880] coresight-funnel 6130000.funnel: FUNNEL initialized | |
[ 2.152784] coresight-funnel 61a1000.funnel: FUNNEL initialized | |
[ 2.159191] coresight-etm4x 619c000.etm: ETM 4.0 initialized | |
[ 2.164835] coresight-etm4x 619d000.etm: ETM 4.0 initialized | |
[ 2.170727] coresight-etm4x 619e000.etm: ETM 4.0 initialized | |
[ 2.176390] coresight-etm4x 619f000.etm: ETM 4.0 initialized | |
[ 2.181804] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized | |
[ 2.187546] coresight-stm 6002000.stm: STM initialized | |
[ 2.196092] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000 | |
[ 2.199950] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized | |
[ 2.210882] NET: Registered protocol family 10 | |
[ 2.215798] MAP-T DMR module registered. enter | |
[ 2.219376] Registering family. | |
[ 2.223831] NET: Registered protocol family 17 | |
[ 2.226988] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
[ 2.231485] Bridge firewalling registered | |
[ 2.244222] 8021q: 802.1Q VLAN Support v1.8 | |
[ 2.249433] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 | |
[ 2.252297] pmd9655_s3: supplied by e-smps1-reg | |
[ 2.259615] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 | |
[ 2.263915] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 | |
[ 2.270545] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 | |
[ 2.278202] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable | |
[ 2.285698] cpr3_mem_acc_init: apc: not using memory accelerator regulator | |
[ 2.294829] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV | |
[ 2.301768] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 840000 uV | |
[ 2.311766] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 896000 uV | |
[ 2.321569] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 992000 uV | |
[ 2.331435] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 660, quot_offset[ 7]= 0 | |
[ 2.341192] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 913, quot_offset[ 7]= 250 | |
[ 2.352041] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1004, quot_offset[ 7]= 90 | |
[ 2.362979] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1171, quot_offset[ 7]= 165 | |
[ 2.374050] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop | |
[ 2.385359] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2 | |
[ 2.391701] pmd9655_s4: supplied by e-smps1-reg | |
[ 2.398861] cpr3_mem_acc_init: npu: not using memory accelerator regulator | |
[ 2.403151] npu_corner: fused NOM: open-loop= 808000 uV | |
[ 2.410106] npu_corner: fused TURBO: open-loop= 880000 uV | |
[ 2.415957] npu_corner: fused NOM: open-loop= 808000 uV | |
[ 2.421549] npu_corner: fused TURBO: open-loop= 880000 uV | |
[ 2.427225] npu_corner: Normal and Cold condition init done. Default to normal. | |
[ 2.433761] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz | |
[ 2.440045] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz | |
[ 2.448645] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss | |
[ 2.455906] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available | |
[ 2.464562] ubi0: attaching mtd18 | |
[ 2.629010] random: nonblocking pool is initialized | |
[ 2.839741] ubi0: scanning is finished | |
[ 2.844718] ubi0: attached mtd18 (name "rootfs", size 97 MiB) | |
[ 2.844736] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
[ 2.849430] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
[ 2.856210] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
[ 2.863059] ubi0: good PEBs: 776, bad PEBs: 0, corrupted PEBs: 0 | |
[ 2.869833] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 | |
[ 2.876084] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 509821238 | |
[ 2.883115] ubi0: available PEBs: 0, total reserved PEBs: 776, PEBs reserved for bad PEB handling: 40 | |
[ 2.892063] ubi0: background thread "ubi_bgt0d" started, PID 121 | |
[ 2.912270] hctosys: unable to open rtc device (rtc0) | |
[ 2.917046] pmd9655_ldo11: disabling | |
[ 2.917496] ALSA device list: | |
[ 2.919927] No soundcards found. | |
[ 2.935013] VFS: Mounted root (squashfs filesystem) readonly on device 31:26. | |
[ 2.935111] Freeing unused kernel memory: 224K (ffffffc000804000 - ffffffc00083c000) | |
[ 2.941131] Freeing alternatives memory: 44K (ffffffc00083c000 - ffffffc000847000) | |
[ 3.171159] init: Console is alive | |
[ 3.171238] init: - watchdog - | |
[ 4.157732] usbcore: registered new interface driver usbfs | |
[ 4.157773] usbcore: registered new interface driver hub | |
[ 4.162161] usbcore: registered new device driver usb | |
[ 4.168635] Button Hotplug driver version 0.4.1 | |
[ 4.173272] exFAT: Version 1.2.9 | |
[ 4.177592] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/button@1[0]' - status (0) | |
[ 4.177601] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_keys/button@2[0]' - status (0) | |
[ 4.179402] SCSI subsystem initialized | |
[ 4.182187] libata version 3.00 loaded. | |
[ 4.184586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 4.184903] ehci-platform: EHCI generic platform driver | |
[ 4.192698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 4.195857] ohci-platform: OHCI generic platform driver | |
[ 4.202479] uhci_hcd: USB Universal Host Controller Interface driver | |
[ 4.211299] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy | |
[ 4.220155] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout | |
[ 4.220176] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868 | |
[ 4.427187] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy | |
[ 4.434602] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout | |
[ 4.434622] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868 | |
[ 4.642662] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 4.642695] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
[ 4.647213] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 | |
[ 4.654622] xhci-hcd xhci-hcd.0.auto: irq 176, io mem 0x08a00000 | |
[ 4.663552] hub 1-0:1.0: USB hub found | |
[ 4.669529] hub 1-0:1.0: 1 port detected | |
[ 4.673204] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
[ 4.677179] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 | |
[ 4.682472] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 4.690202] hub 2-0:1.0: USB hub found | |
[ 4.698343] hub 2-0:1.0: 1 port detected | |
[ 4.702027] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
[ 4.705982] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 | |
[ 4.711385] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010 | |
[ 4.718847] xhci-hcd xhci-hcd.1.auto: irq 177, io mem 0x08c00000 | |
[ 4.727700] hub 3-0:1.0: USB hub found | |
[ 4.733752] hub 3-0:1.0: 1 port detected | |
[ 4.737416] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
[ 4.741390] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 | |
[ 4.746711] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 4.754431] hub 4-0:1.0: USB hub found | |
[ 4.762572] hub 4-0:1.0: 1 port detected | |
[ 4.767818] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_leds/led_red[0]' - status (0) | |
[ 4.767884] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/gpio_leds/led_blue[0]' - status (0) | |
[ 4.769012] usbcore: registered new interface driver usb-storage | |
[ 4.770645] usbcore: registered new interface driver uas | |
[ 5.173878] init: - preinit - | |
[ 7.355404] mount_root: loading kmods from internal overlay | |
[ 7.560982] block: attempting to load /etc/config/fstab | |
[ 7.561432] block: unable to load configuration (fstab: Entry not found) | |
[ 7.565041] block: no usable configuration | |
[ 7.580108] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 171 | |
[ 7.604950] UBIFS (ubi0:2): recovery needed | |
[ 7.680881] UBIFS (ubi0:2): recovery completed | |
[ 7.680929] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" | |
[ 7.684226] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
[ 7.692127] UBIFS (ubi0:2): FS size: 52187136 bytes (49 MiB, 411 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) | |
[ 7.702021] UBIFS (ubi0:2): reserved for root: 0 bytes (0 KiB) | |
[ 7.712250] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID E1666243-3891-4FF0-B70A-C2C947440659, small LPT model | |
[ 7.720677] mount_root: loading kmods from internal overlay | |
[ 7.866423] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16 | |
[ 7.916732] block: attempting to load /etc/config/fstab | |
[ 7.916780] block: unable to load configuration (fstab: Entry not found) | |
[ 7.920765] block: no usable configuration | |
[ 7.928932] mount_root: switching to jffs2 overlay | |
[ 7.956449] ubi1: attaching mtd22 | |
[ 8.041523] ubi1: scanning is finished | |
[ 8.046038] ubi1 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 5, need 40 | |
[ 8.046388] ubi1: attached mtd22 (name "ubifs", size 22 MiB) | |
[ 8.055269] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
[ 8.061080] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
[ 8.067767] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
[ 8.074627] ubi1: good PEBs: 176, bad PEBs: 0, corrupted PEBs: 0 | |
[ 8.081391] ubi1: user volume: 3, internal volumes: 1, max. volumes count: 128 | |
[ 8.087648] ubi1: max/mean erase counter: 10/5, WL threshold: 4096, image sequence number: 426988541 | |
[ 8.094690] ubi1: available PEBs: 0, total reserved PEBs: 176, PEBs reserved for bad PEB handling: 5 | |
[ 8.103974] ubi1: background thread "ubi_bgt1d" started, PID 182 | |
[ 8.130516] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 189 | |
[ 8.182231] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "log" | |
[ 8.182254] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
[ 8.188354] UBIFS (ubi1:0): FS size: 14475264 bytes (13 MiB, 114 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) | |
[ 8.198244] UBIFS (ubi1:0): reserved for root: 683702 bytes (667 KiB) | |
[ 8.208480] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 5A67AA4F-0075-41F4-B01C-E632E113C900, small LPT model | |
[ 8.219933] UBIFS (ubi1:1): background thread "ubifs_bgt1_1" started, PID 195 | |
[ 8.276842] UBIFS (ubi1:1): UBIFS: mounted UBI device 1, volume 1, name "vendor" | |
[ 8.276865] UBIFS (ubi1:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
[ 8.283300] UBIFS (ubi1:1): FS size: 4063232 bytes (3 MiB, 32 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) | |
[ 8.293116] UBIFS (ubi1:1): reserved for root: 191915 bytes (187 KiB) | |
[ 8.303004] UBIFS (ubi1:1): media format: w4/r0 (latest is w4/r0), UUID 4A3F08ED-3950-4D59-A48C-F71BF022ADE0, small LPT model | |
[ 8.324338] procd: - early - | |
[ 8.324376] procd: - watchdog - | |
[ 8.926991] procd: - ubus - | |
[ 9.928497] procd: - init - | |
[ 10.468545] ubi2: attaching mtd21 | |
[ 10.507411] ubi2: scanning is finished | |
[ 10.512695] ubi2: attached mtd21 (name "0:WIFIFW", size 9 MiB) | |
[ 10.512719] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
[ 10.517577] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
[ 10.524319] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
[ 10.531130] ubi2: good PEBs: 72, bad PEBs: 0, corrupted PEBs: 0 | |
[ 10.537987] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 | |
[ 10.543804] ubi2: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1892918225 | |
[ 10.551278] ubi2: available PEBs: 11, total reserved PEBs: 61, PEBs reserved for bad PEB handling: 40 | |
[ 10.560476] ubi2: background thread "ubi_bgt2d" started, PID 1163 | |
[ 11.319540] fuse init (API version 7.23) | |
[ 11.320578] libcsa: Module loaded csahunter. | |
[ 11.322520] libcsa: Module loaded mycsainfo. | |
[ 11.327348] libdfs: Module loaded dfs_justice. | |
[ 11.331033] libdfs: Module loaded dfs_channel_record. | |
[ 11.345291] cfg80211: World regulatory domain updated: | |
[ 11.345314] cfg80211: DFS Master region: unset | |
[ 11.349311] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
[ 11.353924] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 11.363643] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) | |
[ 11.375985] device-mapper: req-crypt: dm-req-crypt successfully initalized. | |
[ 11.375985] | |
[ 11.381662] Key type dns_resolver registered | |
[ 11.389411] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 11.393598] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) | |
[ 11.401387] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) | |
[ 11.411104] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) | |
[ 11.420546] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
[ 11.428608] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) | |
[ 11.430592] RPC: Registered named UNIX socket transport module. | |
[ 11.430593] RPC: Registered udp transport module. | |
[ 11.430594] RPC: Registered tcp transport module. | |
[ 11.430595] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 11.432627] ntfs: driver 2.1.32 [Flags: R/O MODULE]. | |
[ 11.435645] Initializing XFRM netlink socket | |
[ 11.436077] NET: Registered protocol family 15 | |
[ 11.609785] ssdk_switch_device_num_init[1108]:INFO:ess-switch dts node number: 1 | |
[ 11.609844] ssdk_dt_get_switch_node[936]:INFO:ess-switch DT exist! | |
[ 11.616342] ssdk_dt_parse_access_mode[837]:INFO:switch_access_mode: local bus | |
[ 11.622234] ssdk_dt_parse_access_mode[850]:INFO:switchreg_base_addr: 0x3a000000 | |
[ 11.629513] ssdk_dt_parse_access_mode[851]:INFO:switchreg_size: 0x1000000 | |
[ 11.636651] ssdk_dt_parse_mac_mode[289]:INFO:mac mode = 0xb | |
[ 11.643499] ssdk_dt_parse_mac_mode[298]:INFO:mac mode1 = 0xff | |
[ 11.648995] ssdk_dt_parse_mac_mode[307]:INFO:mac mode2 = 0xf | |
[ 11.654897] ssdk_dt_parse_phy_info[641]:INFO:[PORT 6] port_mac_sel = QGMAC_PORT | |
[ 11.660625] ssdk_dt_parse_uniphy[326]:INFO:ess-uniphy DT exist! | |
[ 11.667849] ssdk_dt_parse_intf_mac[783]:INFO:dp1 MAC a4:97:33:df:ae:ae | |
[ 11.673564] ssdk_dt_parse_intf_mac[783]:INFO:dp2 MAC a4:97:33:df:ae:af | |
[ 11.680327] ssdk_dt_parse_intf_mac[783]:INFO:dp3 MAC a4:97:33:df:ae:af | |
[ 11.686774] ssdk_dt_parse_intf_mac[783]:INFO:dp4 MAC a4:97:33:df:ae:af | |
[ 11.693313] ssdk_dt_parse_intf_mac[783]:INFO:dp5 MAC a4:97:33:df:ae:af | |
[ 11.699789] ssdk_plat_init start | |
[ 11.785912] ssdk_gcc_clock_init[938]:INFO:SSDK gcc clock init successfully! | |
[ 11.786198] ssdk_probe[1997]:INFO:ess_rst doesn't exist! | |
[ 11.792263] HPPE initializing... | |
[ 11.797467] malibu_phy_api_ops_init[2849]:INFO:qca probe malibu phy driver succeeded! | |
[ 11.803892] qca808x_phy_api_ops_init[2188]:INFO:qca probe qca808x phy driver succeeded! | |
[ 11.809076] qca808x_ptp_register[1407]:INFO:qca808x ptp clock registered | |
[ 11.816153] regi_init[3525]:INFO:Initializing HPPE!! | |
[ 12.034090] ssdk_ppe_reset_init[1169]:INFO:ppe reset successfully! | |
[ 12.037793] qca_hppe_tdm_hw_init[674]:INFO:tdm setup num=96 | |
[ 12.039538] qca_hppe_portctrl_hw_init[105]:INFO:Hawkeye PPE port initializing | |
[ 13.491177] ssdk_switch_register[1691]:INFO:Chip version 0x1500 | |
[ 13.491224] qca_link_polling_select[1307]:INFO:link-polling-required node does not exist | |
[ 13.495923] ssdk_switch_register[1717]:INFO:polling is selected | |
[ 13.504389] regi_init[3529]:INFO:Initializing HPPE Done!! | |
[ 13.509933] regi_init[3589]:INFO:qca-ssdk module init succeeded! | |
[ 13.516927] tun: Universal TUN/TAP device driver, 1.6 | |
[ 13.521501] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 13.540310] EDMA ver 1 hw init | |
[ 13.540553] EDMA HW Reset completed succesfully | |
[ 13.542278] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) | |
[ 13.546723] RxDesc:1 (15-15) RxFill:1 (7-7) | |
[ 13.756325] ********************************************************** | |
[ 13.756349] * NSS Data Plane driver | |
[ 13.761730] ********************************************************** | |
[ 13.782259] l2tp_core: L2TP core driver, V2.0 | |
[ 13.782707] l2tp_netlink: L2TP netlink interface | |
[ 13.915469] nss_driver - fw of size 758896 bytes copied to load addr: 40000000, nss_id : 0 | |
[ 13.917128] Supported Frequencies - | |
[ 13.922612] 748.8 MHz 1.4976 GHz | |
[ 13.928818] 1.6896 GHz <1>[ 13.929640] | |
[ 13.934278] ffffffbffc8e2b00: set sdma ffffffc038f77500 | |
[ 13.934377] ffffffbffc8e2b00: meminfo init succeed | |
[ 13.976936] node size 2 # items 4 | |
[ 13.976959] memory: 40000000 1073741824 (avl 941330432) items 4 active_cores 2 | |
[ 13.979229] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 | |
[ 13.985103] nss_driver - fw of size 290472 bytes copied to load addr: 40800000, nss_id : 1 | |
[ 13.985881] Supported Frequencies - | |
[ 13.985882] 748.8 MHz | |
[ 13.985883] 1.4976 GHz | |
[ 13.985883] 1.6896 GHz | |
[ 13.985884] | |
[ 13.986016] ffffffbffc8eae80: set sdma ffffffc03b3f9700 | |
[ 13.986065] ffffffbffc8eae80: meminfo init succeed | |
[ 13.987909] sit: IPv6 over IPv4 tunneling driver | |
[ 13.989286] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. | |
[ 13.991011] gre: GRE over IPv4 demultiplexor driver | |
[ 13.991591] ip_gre: GRE over IPv4 tunneling driver | |
[ 13.992976] ip6_gre: GRE over IPv6 tunneling driver | |
[ 13.995041] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) | |
[ 14.014172] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
[ 14.016703] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 14.018886] rmnet_nss_init(): initializing rmnet_nss | |
[ 14.020559] Registering family. | |
[ 14.020572] MAP-T PORT module registered. | |
[ 14.023735] nf_conntrack version 0.5.0 (6926 buckets, 27704 max) | |
[ 14.080798] ffffffbffc8e2b00: nss core 0 booted successfully | |
[ 14.087039] node size 2 # items 4 | |
[ 14.092500] memory: 40000000 1073741824 (avl 941518848) items 4 active_cores 2 | |
[ 14.095725] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000 | |
[ 14.102839] ffffffbffc8eae80: nss core 1 booted successfully | |
[ 15.505674] openvswitch: Open vSwitch switching datapath | |
[ 16.145836] QCA Hy-Fi multicast installation successfully | |
[ 17.325632] PPP generic driver version 2.4.2 | |
[ 17.594649] nss_lag_init[352]:LAG Manager Installed | |
[ 18.134799] NET: Registered protocol family 24 | |
[ 18.534998] PPTP driver version 0.8.5 | |
[ 19.047575] diag: IPC Logging disabled | |
[ 19.047920] TRACK: P[0] PMask[4] | |
[ 19.050202] TRACK: P[1] PMask[4] | |
[ 19.053587] TRACK: P[2] PMask[4] | |
[ 19.056933] TRACK: P[3] PMask[4] | |
[ 19.060039] nik 4097 info->svc_id | |
[ 19.435178] QCA multicast snooping installed successfully | |
[ 19.685395] <NSS-CRYPTO>:module loaded Build_ID - 03/24/22, 02:50:33 SoC=ipq807x_64 | |
[ 19.925402] cannot find nss-macsec0 node | |
[ 19.925447] nss-macsec1 DT exist! | |
[ 19.966011] cannot find nss-macsec2 node | |
[ 19.966025] nss_macsec init success | |
[ 22.646782] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities | |
[ 22.649414] EXT4-fs (dm-0): warning: mounting unchecked fs, running e2fsck is recommended | |
[ 22.690385] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) | |
[ 23.214640] u32 classifier | |
[ 23.214657] input device check on | |
[ 23.216225] Actions configured | |
[ 23.624638] Mirror/redirect action on | |
[ 28.186233] arp_tables: (C) 2002 David S. Miller | |
[ 28.194294] Ebtables v2.0 registered | |
[ 28.195896] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 28.201206] l2tp_ppp: PPPoL2TP kernel driver, V2.0 | |
[ 28.271135] nf_conntrack_rtsp v0.6.21 loading | |
[ 28.378598] nf_nat_rtsp v0.6.21 loading | |
[ 28.382188] Netfilter messages via NETLINK v0.30. | |
[ 28.383945] PPP MPPE Compression module registered | |
[ 28.408731] xt_time: kernel timezone is -0000 | |
[ 28.409439] xt_webstr: module license 'unspecified' taints kernel. | |
[ 28.412060] Disabling lock debugging due to kernel taint | |
[ 28.426459] ctnetlink v0.93: registering with nfnetlink. | |
[ 32.700120] configuring additional NSS pbufs | |
[ 32.722149] additional pbufs of size 9003008 got added to NSS | |
[ 33.325111] wlan: [2588:I:ANY] =======ol_if_register_wifi3_0========== | |
[ 33.325111] | |
[ 33.325144] wlan: [2588:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffdba27e0 | |
[ 33.331939] wlan: [2588:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 2 bus_type 1 | |
[ 33.344103] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss | |
[ 33.364310] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 | |
[ 34.242324] Subsystem error monitoring/handling services are up | |
[ 34.242615] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up | |
[ 34.243063] rpmsg_dev_probe: No pm domain | |
[ 34.243265] rpmsg_dev_probe: No pm domain | |
[ 34.244256] cnss[2]: INFO: QMI WLFW service connected, state: 0x1 | |
[ 34.244413] cnss[2]: INFO: device_id : 65534 mem mode : [0] | |
[ 34.244553] cnss[2]: INFO: platform name: Askey RT5010W-D350/REV0 | |
[ 34.244553] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffcd3e248 | |
[ 34.245081] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x230d84a5, fw_build_timestamp: 2020-10-27 22:02, otp_version: 0x0 eeprom_caldata_read_timeout 0s | |
[ 34.245090] cnss[2]: INFO: No board_id entry in device tree | |
[ 34.248953] cnss[2]: INFO: BDF location : 0x4b0c0000 | |
[ 34.248958] cnss[2]: INFO: BDF IPQ8074/bdwlan.bin size 131072 | |
[ 34.249570] cnss[2]: INFO: per device BDF location : 0x4b0e0000 | |
[ 34.249680] cnss[2]: INFO: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000 | |
[ 34.331892] wlan: [2588:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 3 bus_type 1 | |
[ 34.339510] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffe, FW ready timeout: 15 seconds | |
[ 34.348007] cnss[2]: INFO: FW ready received for device 0xfffe | |
[ 34.356895] wlan: [2588:I:ANY] pld_ahb_wlan_enable: 705: cnss_mode: Mission mode | |
[ 34.362346] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7 | |
[ 34.378561] wlan: [2588:I:ANY] qca_napi_create: 373: qca_napi_create: napi instance 0 created on pipe 4 | |
[ 34.378749] wlan: [2588:I:ANY] __ol_ath_attach: 3994: Allocated soc ffffffc033f00880 | |
[ 34.408362] wlan: [2588:I:ANY] osif_nss_wifi_soc_setup: 815: nss-wifili:#1 register wifili function for soc | |
[ 34.408397] wlan: [2588:I:ANY] osif_nss_wifi_soc_setup: 827: nss register id -1 nss config 3 Target Type 18 | |
[ 34.417278] wlan: [2588:I:ANY] __ol_ath_attach: 4198: dev name soc0 | |
[ 34.427217] wlan: [2588:I:ANY] ol_ath_soc_attach: 6421: WMI attached. wmi_handle ffffffc033c9f000 | |
[ 34.435155] wlan: [2588:I:ANY] htc_wmi_init: 5460: HT Create . ffffffc033558000 | |
[ 34.442074] wlan: [2588:I:ANY] htc_wmi_init: 5467: Skipping BMI Done | |
[ 34.449284] wlan: [2588:I:ANY] htc_wmi_init: 5524: host_enable 0 nss_nwifi_offload 0 | |
[ 34.461499] wlan: [2588:I:ANY] ol_target_init_complete: 5595: CDP soc attach success | |
[ 34.463605] wlan: [2588:I:ANY] ol_target_init_complete: 5602: Soc attach success NSS config 0 | |
[ 34.471387] wlan: [2588:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc033558000, ep 2, value 1 | |
[ 34.479796] wlan: [2588:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ffffffc033558000, ep 3, value 1 | |
[ 34.490407] wlan: [2557:I:TIF] init_deinit_atf_config_enable: 1099: Airtime Fairness: num_peers=0 num_active_peer=0 | |
[ 34.500443] wlan: [2557:I:TIF] HE_CAP Info = 1a08010d | |
[ 34.510737] wlan: [2557:I:TIF] Num HW modes = 1 | |
[ 34.515942] wlan: [2557:I:TIF] Num PHY = 2 | |
[ 34.520279] wlan: [2557:I:TIF] FW Build Version (Ext.) = 0 | |
[ 34.524451] wlan: [2557:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0 | |
[ 34.529923] wlan: [2557:I:TIF] Preferred HW Mode = 1 Num Radios = 2 | |
[ 34.536803] wlan: [2557:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 1 phy_id = 0 wireless modes = f97f9001 | |
[ 34.543036] wlan: [2557:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 1 phy_id = 1 wireless modes = 680688c | |
[ 34.554022] wlan: [2557:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 431: dfs_offload 1 | |
[ 34.563961] wlan: [2557:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 3417: dfs->dfs_psoc_idx: 0 | |
[ 34.574375] wlan: [2557:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 3423: dfs_soc_obj->num_dfs_privs: 1 | |
[ 34.584474] wlan: [2557:I:TIF] init_deinit_alloc_pdevs: 1550: CDP PDEV ATTACH success | |
[ 34.594328] wlan: [2557:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 403: Do not allocate DFS object for 2G, pdev_id = 1 | |
[ 34.602754] wlan: [2557:I:TIF] init_deinit_alloc_pdevs: 1550: CDP PDEV ATTACH success | |
[ 34.615173] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2 | |
[ 34.622979] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0 | |
[ 34.630797] wlan: [2557:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34 | |
[ 34.638960] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2 | |
[ 34.647201] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0 | |
[ 34.655104] wlan: [2557:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34 | |
[ 34.663260] wlan: [2557:I:TIF] init_deinit_get_total_beaconing_vdevs_for_soc: 598: beacon_tx_offload_max_vdev: 32 | |
[ 34.671511] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2 | |
[ 34.681836] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0 | |
[ 34.689649] wlan: [2557:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34 | |
[ 34.697808] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 1 | |
[ 34.706055] wlan: [2557:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0 | |
[ 34.713952] wlan: [2557:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 17 | |
[ 34.722119] wlan: [2557:I:ANY] init_deinit_update_pdev_tgt_info: 1924: pdev id:0 wmi_handle:ffffffc033c9f000 | |
[ 34.734481] wlan: [2557:I:ANY] init_deinit_update_pdev_tgt_info: 1995: Pdev = 0 Number of peers = 529 vdevs = 17 | |
[ 34.740346] wlan: [2557:I:TIF] init_deinit_update_pdev_tgt_info: 1998: CDP PDEV INIT success | |
[ 34.750629] wlan: [2557:I:ANY] init_deinit_update_pdev_tgt_info: 1924: pdev id:1 wmi_handle:ffffffc032a51000 | |
[ 34.762995] wlan: [2557:I:ANY] init_deinit_update_pdev_tgt_info: 1995: Pdev = 1 Number of peers = 529 vdevs = 17 | |
[ 34.768749] wlan: [2557:I:TIF] init_deinit_update_pdev_tgt_info: 1998: CDP PDEV INIT success | |
[ 34.879415] wlan: [2557:I:ANY] copy_fw_abi_version_tlv: 7216: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0 | |
[ 35.081512] wlan: [2557:I:ANY] ready_extract_init_status_tlv: 9738: ready_extract_init_status_tlv:0 | |
[ 35.081541] wlan: [2557:I:ANY] dp_peer_map_attach_wifi3: 9582: dp_peer_map_attach_wifi3 max_peers 1109, max_ast_index: 4112 | |
[ 35.081541] | |
[ 35.089558] wlan: [2588:I:ANY] ol_ath_connect_htc: 1250: WMI is ready | |
[ 35.153028] wlan: [2588:E:TIF] target_if_lro_hash_config: 254: pdev with id 0 is NULL | |
[ 35.155864] wlan: [2588:E:TIF] target_if_lro_hash_config: 254: pdev with id 1 is NULL | |
[ 35.160089] wlan: [2588:I:ANY] ol_ath_soc_attach: 6549: connect HTC | |
[ 35.167663] wlan: [2588:I:ANY] ol_ath_soc_attach: 6550: bypasswmi : 0 | |
[ 35.173731] wlan: [2588:I:ANY] ol_ath_soc_attach: 6624: UMAC attach | |
[ 35.180382] wlan: [2588:I:ANY] __ol_ath_attach: 4320: pdev_netdev name wifi0 | |
[ 35.186406] wlan: [2588:I:ANY] __ol_ath_attach: 4369: Skip txrx_pdev_attach_target | |
[ 35.193683] wlan: [2588:I:ANY] __ol_ath_attach: 4395: BURSTING enabled by default | |
[ 35.201116] wlan: [2588:I:ANY] ol_ath_pdev_attach: 8632: interface_id 0 | |
[ 35.208622] wlan: [2588:I:TIF] ol_ath_pdev_regdmn_init: 6785: phy id = 0 Modes supported | |
[ 35.215042] wlan: [2588:I:TIF] ol_ath_pdev_regdmn_init: 6792: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1 | |
[ 35.223378] wlan: [2588:I:TIF] ol_ath_pdev_regdmn_init: 6801: Reg cap - phy_id = 0 supp_bnd = 2, modes = 793f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920 | |
[ 35.233630] wlan: [2588:I:ANY] ol_ath_update_wireless_modes: 1325: wireless_modes = 793f9001 before update | |
[ 35.247943] wlan: [2588:I:ANY] ol_ath_update_wireless_modes: 1341: Wireless_modes = 793f9001 after update | |
[ 35.257667] wlan: [2588:I:ANY] ol_ath_update_ext_caps: 1933: 11ax 5G supported case | |
[ 35.267396] wlan: [2588:I:MBSSIE] ieee80211_mbss_attach: 220: :> | |
[ 35.274760] wlan: [2588:I:MBSSIE] ieee80211_mbss_attach: 233: :< | |
[ 35.281007] wlan: [2588:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed | |
[ 35.287111] wlan: [2588:I:ANY] acfg_attach: 3339: acfg_attach: 3339: Netlink socket created:ffffffc02e2d4c00 | |
[ 35.293344] wlan: [2588:I:ANY] ol_ath_stats_attach: 2294: periodic_chan_stats: 1 | |
[ 35.304073] wlan: [2588:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 25 | |
[ 35.310820] wlan: [0:I:ANY] ol_ath_pdev_attach: 8948: Set global_ic[1], ptr:ffffffbffd88c5e8 | |
[ 35.318169] wlan: [0:I:RPTR] qca_multi_link_init_module: 245: | |
[ 35.318169] ******QCA Repeater Initialization Done*********** | |
[ 35.318169] | |
[ 35.326597] wlan: [0:I:ANY] dp_lag_soc_enable: 102: pdev(ffffffc032a50c08) Enabling DBDC Repeater 0 | |
[ 35.339541] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 55: pdev(ffffffc032a50c08) is_primary 0 | |
[ 35.339550] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed | |
[ 35.357693] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 50: twt enabled | |
[ 35.359026] wlan: [2588:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 606: cfg block channel list is empty | |
[ 35.359031] wlan: [2588:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3892: pdev_idx = 0 tx_desc_limit = 32768 | |
[ 35.359046] wlan: [2588:I:ANY] osif_wrap_attach: 239: osif wrap attached | |
[ 35.359046] | |
[ 35.359048] wlan: [2588:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done | |
[ 35.359048] | |
[ 35.359052] wlan: [2588:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc02e2d5000 ic->ic_wrap_com=ffffffc02e2d5000 &wrap_com->wc_devt=ffffffc02e2d5000 | |
[ 35.359052] | |
[ 35.359070] wlan: [2588:I:ANY] __ol_ath_attach: 4568: needed_headroom reservation 60 | |
[ 35.359074] wlan: [2588:I:ANY] ol_ath_enable_fraglist: 3344: Enabled Fraglist bit for the radio wifi0 features 41 | |
[ 35.359263] wlan: [2588:I:ANY] ieee80211_cfg80211_radio_attach: 13328: ic: 0xffffffc032980880, wdev: 0xffffffc032998aa0, wiphy: 0xffffffc033bd4aa0, netdev: 0xffffffc032980000 | |
[ 35.359679] wlan: [2588:I:ANY] __ol_ath_attach: 4320: pdev_netdev name wifi1 | |
[ 35.359693] wlan: [2588:I:ANY] __ol_ath_attach: 4369: Skip txrx_pdev_attach_target | |
[ 35.359695] wlan: [2588:I:ANY] __ol_ath_attach: 4395: BURSTING enabled by default | |
[ 35.359733] wlan: [2588:I:ANY] ol_ath_pdev_attach: 8632: interface_id 1 | |
[ 35.359743] wlan: [2588:I:TIF] ol_ath_pdev_regdmn_init: 6785: phy id = 1 Modes supported | |
[ 35.359746] wlan: [2588:I:TIF] ol_ath_pdev_regdmn_init: 6792: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 | |
[ 35.359751] wlan: [2588:I:TIF] ol_ath_pdev_regdmn_init: 6801: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0 | |
[ 35.359753] wlan: [2588:I:ANY] ol_ath_update_wireless_modes: 1325: wireless_modes = 680680c before update | |
[ 35.359756] wlan: [2588:I:ANY] ol_ath_update_wireless_modes: 1341: Wireless_modes = 680680c after update | |
[ 35.359761] wlan: [2588:I:ANY] ol_ath_update_ext_caps: 1941: 11ax 2G supported case | |
[ 35.359842] wlan: [2588:I:MBSSIE] ieee80211_mbss_attach: 220: :> | |
[ 35.359844] wlan: [2588:I:MBSSIE] ieee80211_mbss_attach: 233: :< | |
[ 35.359848] wlan: [2588:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed | |
[ 35.359954] wlan: [2588:I:ANY] acfg_attach: 3314: Offload using existing sock ffffffc02e2d4c00 | |
[ 35.359960] wlan: [2588:I:ANY] ol_ath_stats_attach: 2294: periodic_chan_stats: 1 | |
[ 35.360127] wlan: [2588:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 11 | |
[ 35.360152] wlan: [0:I:ANY] ol_ath_pdev_attach: 8948: Set global_ic[2], ptr:ffffffbffd88c5e8 | |
[ 35.360156] wlan: [0:I:ANY] dp_lag_soc_enable: 102: pdev(ffffffc032a51408) Enabling DBDC Repeater 0 | |
[ 35.360179] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 55: pdev(ffffffc032a51408) is_primary 0 | |
[ 35.361698] wlan: [2588:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 606: cfg block channel list is empty | |
[ 35.361702] wlan: [2588:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3892: pdev_idx = 1 tx_desc_limit = 32768 | |
[ 35.361714] wlan: [2588:I:ANY] osif_wrap_attach: 239: osif wrap attached | |
[ 35.361714] | |
[ 35.361717] wlan: [2588:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done | |
[ 35.361717] | |
[ 35.361721] wlan: [2588:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =ffffffc02e2d7c00 ic->ic_wrap_com=ffffffc02e2d7c00 &wrap_com->wc_devt=ffffffc02e2d7c00 | |
[ 35.361721] | |
[ 35.361734] wlan: [2588:I:ANY] __ol_ath_attach: 4568: needed_headroom reservation 60 | |
[ 35.361738] wlan: [2588:I:ANY] ol_ath_enable_fraglist: 3344: Enabled Fraglist bit for the radio wifi1 features 41 | |
[ 35.361753] wlan: [2588:I:ANY] wlan_cfg80211_init: 13145: Number of 2G channels: 11 | |
[ 35.361863] wlan: [2588:I:ANY] ieee80211_cfg80211_radio_attach: 13328: ic: 0xffffffc032a60880, wdev: 0xffffffc032a78aa0, wiphy: 0xffffffc02d6102a0, netdev: 0xffffffc032a60000 | |
[ 35.362205] wlan: [2588:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3861: Running with HW mode = 1 | |
[ 35.362390] wlan: [2588:E:QLD] qld_register: 108: Handle or address is NULL | |
[ 35.362403] wlan: [2588:I:ANY] wlan_pdev_operation: 796: num_radios=1, wifi_radios[0].sc = ffffffc032980880_radio_type = 2 | |
[ 35.362406] wlan: [2588:I:ANY] wlan_pdev_operation: 796: num_radios=2, wifi_radios[1].sc = ffffffc032a60880_radio_type = 2 | |
[ 35.362427] wlan: [2588:I:ANY] init_ath_pci_3_0: 183: 6ath_ol_pci_wifi3.0 : (Atheros/multi-bss) | |
[ 35.750930] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed | |
[ 35.760273] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 50: twt enabled | |
[ 35.788210] wlan: [2590:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:0 with soc_ops:ffffffbffdc47ef0 | |
[ 35.788543] wlan: [2590:I:ANY] init_ath_pci_2_0: 147: 6ath_ol_pci_2_0: (Atheros/multi-bss) | |
[ 37.859380] ECM init | |
[ 37.859426] ECM database jhash random seed: 0x7e3f1cd | |
[ 37.861564] ECM init complete | |
[ 38.874832] ECM OVS Test INIT | |
[ 39.185735] device eth1 entered promiscuous mode | |
[ 39.187062] br-lan: port 1(eth1) entered forwarding state | |
[ 39.189452] br-lan: port 1(eth1) entered forwarding state | |
[ 39.200163] device eth2 entered promiscuous mode | |
[ 39.200221] br-lan: port 2(eth2) entered forwarding state | |
[ 39.204822] br-lan: port 2(eth2) entered forwarding state | |
[ 39.214362] device eth3 entered promiscuous mode | |
[ 39.215531] br-lan: port 3(eth3) entered forwarding state | |
[ 39.220175] br-lan: port 3(eth3) entered forwarding state | |
[ 39.229647] device eth4 entered promiscuous mode | |
[ 39.230858] br-lan: port 4(eth4) entered forwarding state | |
[ 39.235564] br-lan: port 4(eth4) entered forwarding state | |
[ 40.174150] br-lan: port 1(eth1) entered disabled state | |
[ 40.174556] br-lan: port 2(eth2) entered disabled state | |
[ 40.178376] br-lan: port 3(eth3) entered disabled state | |
[ 40.183749] br-lan: port 4(eth4) entered disabled state | |
[ 41.285594] wlan: [4692:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 4 | |
[ 41.285997] wlan: [4692:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 4 | |
[ 41.291797] wlan: [4692:I:ANY] number of channels: 2G = 0 5G = 4, 6G = 0 | |
[ 41.299403] wlan: [3316:I:ANY] ol_acfg_handle_wifi_ioctl: 447: ol_acfg_handle_wifi_ioctl: req->cmd=76 not valid for radio interface, it's for VAP | |
[ 41.399012] wlan: [4721:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 4 | |
[ 41.399131] wlan: [4721:I:ANY] number of channels: 2G = 0 5G = 4, 6G = 0 | |
[ 41.500173] wlan: [4770:I:Monitor Filter] dp_mon_ht2_rx_ring_cfg: 119: srng type 2 Max_mac_rings 1 | |
[ 41.500238] wlan: [4770:I:Monitor Filter] dp_mon_ht2_rx_ring_cfg: 119: srng type 1 Max_mac_rings 1 | |
[ 41.540180] wlan: [4775:I:ANY] ol_ath_set_config_param: 1650: set TXBF_SND_PERIOD: val 100 stat 0 | |
[ 41.611079] wlan: [4786:I:ANY] ol_ath_set_config_param: 2304: snr should be a positive value. | |
[ 41.611079] | |
[ 41.624750] wlan: [0:I:ANY] ol_ath_set_config_param: 2442: Disconnect_timeout value: 10 | |
[ 41.638415] wlan: [0:I:ANY] ol_ath_set_config_param: 2448: Reconfiguration_timeout value:60 | |
[ 42.060991] wlan: [4916:I:ANY] wlan_cfg80211_add_virtual_intf: 352: proprietary mode 6 for interface: ath0 : clone params: 0x00000001 | |
[ 42.061067] wlan: [4916:I:ANY] osifp_create_wlan_vap: 9900: VDEV Create a4:97:33:df:ae:b0 | |
[ 42.072318] wlan: [4916:I:ANY] wlan_vap_create: 1644: devhandle=0xffffffc032980880, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 42.072318] | |
[ 42.080579] wlan: [4916:I:ANY] ol_ath_vap_set_param: 1556: Setting SGI value: 1 | |
[ 42.092669] wlan: [4916:I:ANY] ol_ath_vap_set_param: 2609: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 42.099707] wlan: [4916:I:ANY] ol_ath_vap_set_param: 2622: he_bf_cap=0x7b | |
[ 42.115014] wlan: [4916:I:ANY] ol_ath_vap_set_param: 2637: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 42.121859] wlan: [4916:I:ANY] MBO Initialized | |
[ 42.135818] wlan: [4916:I:ANY] OCE Initialized | |
[ 42.140225] wlan: [4916:I:ANY] osif_nss_ol_vap_create: 1282: NSS wifi offload VAP create IF 31 nss_id -1 | |
[ 42.144697] wlan: [4916:I:ANY] NSS radio_if 28 | |
[ 42.154350] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1007: VDEV configuration success: 0 | |
[ 42.158630] wlan: [4916:I:ANY] osif_nss_ol_vap_create: 1394: vap create ffffffc02d290880 : if_num 31 | |
[ 42.167133] wlan: [4916:I:ANY] osif_create_vap_complete: 10120: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 42.176352] wlan: [4916:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 42.185605] wlan: [4916:I:ANY] VAP device ath0 created osifp: (ffffffc02d290880) os_if: (ffffffc03c738000) | |
[ 42.334942] wlan: [4949:I:ANY] ol_ath_vap_set_param: 1556: Setting SGI value: 1 | |
[ 42.412686] wlan: [4957:I:ANY] osif_pdev_restart_vaps: 8845: No active vaps | |
[ 42.462852] wlan: [4965:I:ANY] osif_nss_vdev_set_cfg: 2064: setting me mode 5 target type 0 | |
[ 42.462884] wlan: [4965:I:ANY] osif_nss_vdev_set_cfg: 2068: Mcast command 5 | |
[ 42.624932] wlan: [4981:I:ANY] ieee80211_ucfg_setparam: 1722: Setting Max Stations:128 | |
[ 42.754118] nss-dp 3a007000.dp1 eth0: PHY Link up speed: 1000 | |
[ 42.984418] 8021q: adding VLAN 0 to HW filter on device ath0 | |
[ 42.985207] device ath0 entered promiscuous mode | |
[ 42.989302] br-lan: port 5(ath0) entered forwarding state | |
[ 42.993761] br-lan: port 5(ath0) entered forwarding state | |
[ 42.999066] wlan: [0:E:NSS] osif_nss_wifi_mac_db_event_receive: 101: [nss-wifi-mac-db-nfy]: NSS wifi mac db configuration message failed with error = 0 | |
[ 43.054503] wlan: [3326:I:ANY] wlan_cfg80211_do_acs: 4440: vap-0(ath0):ACS Params | |
[ 43.054532] wlan: [3326:I:ANY] wlan_cfg80211_do_acs: 4443: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:30|chwidth:20| | |
[ 43.061016] wlan: [3326:I:ANY] ieee80211_autoselect_infra_bss_channel: 4136: ACS started: vap:0xffffffc03c738000 | |
[ 43.248953] wlan: [5118:I:ANY] wlan_cfg80211_set_wiphy_params: 2448: WARNING: Fragmentation with HT mode NOT ALLOWED!! | |
[ 43.290605] wlan: [5124:I:ANY] ol_ath_vap_set_param: 1653: Configuring MCAST RATE is deffered as channel is not yet set for VAP | |
[ 43.833810] wlan: [5632:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 13 | |
[ 43.833888] wlan: [5632:I:ANY] number of channels: 2G = 13 5G = 0, 6G = 0 | |
[ 43.997254] wlan: [5654:I:Monitor Filter] dp_mon_ht2_rx_ring_cfg: 119: srng type 2 Max_mac_rings 1 | |
[ 43.997323] wlan: [5654:I:Monitor Filter] dp_mon_ht2_rx_ring_cfg: 119: srng type 1 Max_mac_rings 1 | |
[ 44.035532] wlan: [5659:I:ANY] ol_ath_set_config_param: 1650: set TXBF_SND_PERIOD: val 100 stat 0 | |
[ 44.106400] wlan: [5669:I:ANY] ol_ath_set_config_param: 2304: snr should be a positive value. | |
[ 44.106400] | |
[ 44.120255] wlan: [0:I:ANY] ol_ath_set_config_param: 2442: Disconnect_timeout value: 10 | |
[ 44.133918] wlan: [0:I:ANY] ol_ath_set_config_param: 2448: Reconfiguration_timeout value:60 | |
[ 44.308836] wlan: [2585:I:ANY] ACS failed to derive the channel. So,selecting channel with least BSS | |
[ 44.308875] wlan: [2585:I:ANY] random channel is 40 freq 5200 | |
[ 44.317062] wlan: [2585:I:ANY] ******** ACS report ******** | |
[ 44.322769] wlan: [2585:I:ANY] Channel | BSS | minrssi | maxrssi | NF | Ch load | spect load | sec_chan | SR bss | SR load | Ch Avil | Chan eff | NearBSS | Med BSS | Far BSS | Eff BSS | chan grade | |
[ 44.328543] wlan: [2585:I:ANY] ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
[ 44.345982] wlan: [2585:I:ANY] 5180( 36) 3 12 32 -106 1 0 0 0 0 50 470 0 1 2 200 94 | |
[ 44.363618] wlan: [2585:I:ANY] 5200( 40) 0 0 0 -105 0 0 1 0 0 66 653 0 0 0 150 98 | |
[ 44.380783] wlan: [2585:I:ANY] 5220( 44) 0 0 0 -105 0 0 0 0 0 80 800 0 0 0 125 100 | |
[ 44.398164] wlan: [2585:I:ANY] 5240( 48) 0 0 0 -105 0 0 0 0 0 86 853 0 0 0 116 99 | |
[ 44.415576] wlan: [2585:I:ANY] vap-0(ath0): ACS result PCH 40 freq 5200, SCH 44 freq 5220, hw_mode 2 chwidth 80, vht_seg0 42 freq 5210, vht_seg1 0 freq 0 | |
[ 44.432871] wlan: [2585:I:ANY] ieee80211_acs_scan_evhandler: 3870: lock held duration: 124(ms) | |
[ 44.455952] wlan: [3326:I:ANY] DES SSID SET=Dynalink-AE-5G | |
[ 44.455964] wlan: [3326:I:ANY] desired hw mode: 30 | |
[ 44.456060] wlan: [3326:I:ANY] ieee80211_ucfg_set_freq_internal: 575: | |
[ 44.456060] Channel is configured already!! | |
[ 44.478904] wlan: [5797:I:ANY] wlan_cfg80211_add_virtual_intf: 352: proprietary mode 6 for interface: ath1 : clone params: 0x00000001 | |
[ 44.478972] wlan: [5797:I:ANY] osifp_create_wlan_vap: 9900: VDEV Create a4:97:33:df:ae:b1 | |
[ 44.490313] wlan: [5797:I:ANY] wlan_vap_create: 1644: devhandle=0xffffffc032a60880, opmode=IEEE80211_M_HOSTAP, flags=0x1 | |
[ 44.490313] | |
[ 44.498782] wlan: [5797:I:ANY] ol_ath_vap_set_param: 1556: Setting SGI value: 1 | |
[ 44.510877] wlan: [5797:I:ANY] ol_ath_vap_set_param: 2609: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0 | |
[ 44.517922] wlan: [5797:I:ANY] ol_ath_vap_set_param: 2622: he_bf_cap=0x7b | |
[ 44.533359] wlan: [5797:I:ANY] ol_ath_vap_set_param: 2637: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged | |
[ 44.539878] wlan: [5797:I:ANY] MBO Initialized | |
[ 44.553944] wlan: [5797:I:ANY] OCE Initialized | |
[ 44.558327] wlan: [5797:I:ANY] osif_nss_ol_vap_create: 1282: NSS wifi offload VAP create IF 32 nss_id -1 | |
[ 44.562631] wlan: [5797:I:ANY] NSS radio_if 29 | |
[ 44.572469] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: 1007: VDEV configuration success: 0 | |
[ 44.576578] wlan: [5797:I:ANY] osif_nss_ol_vap_create: 1394: vap create ffffffc02d292880 : if_num 32 | |
[ 44.585159] wlan: [5797:I:ANY] osif_create_vap_complete: 10120: TX Checksum:1|SG:1|TSO:1|LRO:0 | |
[ 44.594309] wlan: [5797:I:ANY] WLAN-NSS: VAP NSS ops initialized | |
[ 44.603683] wlan: [5797:I:ANY] VAP device ath1 created osifp: (ffffffc02d292880) os_if: (ffffffc0290a0000) | |
[ 44.775074] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:40 freq:5200 | |
[ 44.775425] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps) | |
[ 44.779849] wlan: [0:I:ANY] ol_ath_vap_set_param: 1812: Now supported CTRL RATE is:6000 kbps, rate code:0x10000003 | |
[ 44.782126] wlan: [5905:I:ANY] ol_ath_vap_set_param: 1556: Setting SGI value: 1 | |
[ 44.795556] wlan: [0:I:ANY] ol_ath_vap_set_param: 1686: Now supported MCAST RATE 54000(kbps), rate code: 0x10000004 | |
[ 44.802755] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps) | |
[ 44.813143] wlan: [0:I:ANY] ol_ath_vap_set_param: 1812: Now supported CTRL RATE is:6000 kbps, rate code:0x10000003 | |
[ 44.818701] wlan: [0:I:ANY] ol_ath_vap_set_param: 1686: Now supported MCAST RATE 54000(kbps), rate code: 0x10000004 | |
[ 44.909875] wlan: [5922:I:ANY] osif_pdev_restart_vaps: 8845: No active vaps | |
[ 44.960581] wlan: [5935:I:ANY] osif_nss_vdev_set_cfg: 2064: setting me mode 5 target type 0 | |
[ 44.960613] wlan: [5935:I:ANY] osif_nss_vdev_set_cfg: 2068: Mcast command 5 | |
[ 44.984099] br-lan: port 5(ath0) entered forwarding state | |
[ 45.124248] wlan: [5951:I:ANY] ieee80211_ucfg_setparam: 1722: Setting Max Stations:128 | |
[ 45.459195] 8021q: adding VLAN 0 to HW filter on device ath1 | |
[ 45.459946] device ath1 entered promiscuous mode | |
[ 45.463972] br-lan: port 6(ath1) entered forwarding state | |
[ 45.468536] br-lan: port 6(ath1) entered forwarding state | |
[ 45.534507] wlan: [3326:I:ANY] wlan_cfg80211_do_acs: 4440: vap-1(ath1):ACS Params | |
[ 45.534537] wlan: [3326:I:ANY] wlan_cfg80211_do_acs: 4443: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20| | |
[ 45.540975] wlan: [3326:I:ANY] ieee80211_autoselect_infra_bss_channel: 4136: ACS started: vap:0xffffffc0290a0000 | |
[ 45.692440] wlan: [6076:I:ANY] wlan_cfg80211_set_wiphy_params: 2448: WARNING: Fragmentation with HT mode NOT ALLOWED!! | |
[ 45.734859] wlan: [6082:I:ANY] ol_ath_vap_set_param: 1653: Configuring MCAST RATE is deffered as channel is not yet set for VAP | |
[ 46.577405] ubi0 error: ubi_open_volume: cannot open device 0, volume 2, error -16 | |
[ 46.577450] ubi1 error: ubi_open_volume: cannot open device 1, volume 0, error -16 | |
[ 46.584218] ubi1 error: ubi_open_volume: cannot open device 1, volume 1, error -16 | |
[ 47.464057] br-lan: port 6(ath1) entered forwarding state | |
[ 50.162499] wlan: [2585:I:ANY] ACS failed to derive the channel. So,selecting random channel | |
[ 50.162546] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.170073] wlan: [2585:I:ANY] ******** ACS report ******** | |
[ 50.176803] wlan: [2585:I:ANY] Channel | BSS | minrssi | maxrssi | NF | Ch load | spect load | sec_chan | SR bss | SR load | Ch Avil | Chan eff | NearBSS | Med BSS | Far BSS | Eff BSS | chan grade | |
[ 50.182695] wlan: [2585:I:ANY] ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
[ 50.200190] wlan: [2585:I:ANY] 2412( 1) 1 21 21 -91 12 0 0 0 0 58 588 0 0 1 170 100 | |
[ 50.217832] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.234979] wlan: [2585:I:ANY] 2417( 2) 0 0 0 -92 12 0 0 0 0 80 0 0 0 0 124 100 | |
[ 50.241909] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.259282] wlan: [2585:I:ANY] 2422( 3) 1 20 20 -91 13 0 0 0 0 63 0 0 0 1 158 100 | |
[ 50.266252] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.283587] wlan: [2585:I:ANY] 2427( 4) 0 0 0 -92 10 0 0 0 0 63 0 0 0 0 157 100 | |
[ 50.290564] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.307914] wlan: [2585:I:ANY] 2432( 5) 3 15 17 -97 11 0 0 0 0 51 0 0 0 3 195 100 | |
[ 50.314854] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.332196] wlan: [2585:I:ANY] 2437( 6) 1 21 21 -92 15 0 0 0 0 56 561 0 0 1 178 100 | |
[ 50.339168] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.356498] wlan: [2585:I:ANY] 2442( 7) 0 0 0 -93 5 0 0 0 0 61 0 0 0 0 162 100 | |
[ 50.363436] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.380821] wlan: [2585:I:ANY] 2447( 8) 2 18 23 -92 29 0 0 0 0 63 0 0 0 2 158 100 | |
[ 50.387772] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.405108] wlan: [2585:I:ANY] 2452( 9) 0 0 0 -91 35 0 0 0 0 54 0 0 0 0 183 100 | |
[ 50.412047] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.429429] wlan: [2585:I:ANY] 2457( 10) 0 0 0 -93 27 0 0 0 0 49 0 0 0 0 203 100 | |
[ 50.436412] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.453723] wlan: [2585:I:ANY] 2462( 11) 6 14 38 -92 16 0 0 0 0 36 363 0 1 5 275 100 | |
[ 50.460705] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.478027] wlan: [2585:I:ANY] 2467( 12) 0 0 0 -92 7 0 0 0 0 53 0 0 0 0 187 100 | |
[ 50.484990] wlan: [2585:E:ANY] wlan_get_opclass: 1737: Operating class is 0 | |
[ 50.502336] wlan: [2585:I:ANY] 2472( 13) 0 0 0 -93 40 0 0 0 0 63 0 0 0 0 158 100 | |
[ 50.509488] wlan: [2585:I:ANY] vap-1(ath1): ACS result PCH 1 freq 2412, SCH 5 freq 2432, hw_mode 1 chwidth 40, vht_seg0 3 freq 2422, vht_seg1 0 freq 0 | |
[ 50.526676] wlan: [2585:I:ANY] ieee80211_acs_scan_evhandler: 3870: lock held duration: 364(ms) | |
[ 50.550170] wlan: [3326:I:ANY] DES SSID SET=Dynalink-AE-2.4G | |
[ 50.550199] wlan: [3326:I:ANY] desired hw mode: 29 | |
[ 50.555163] wlan: [3326:I:ANY] ieee80211_ucfg_set_freq_internal: 575: | |
[ 50.555163] Channel is configured already!! | |
[ 50.559679] wlan: [0:I:ANY] ieee80211_disable_legacy_rates: 1632: ieee80211_disable_legacy_rates:MSG: User has disabled the previously set modified rate for beacon. | |
[ 50.570243] wlan: [0:I:ANY] ieee80211_disable_legacy_rates: 1633: ieee80211_disable_legacy_rates:MSG: Hence going for the lowest available basic rate for beacon: 0 (Kbps) | |
[ 50.718183] wlan: [0:I:CMN_MLME] vdev[1] ieee chan:1 freq:2412 | |
[ 50.718599] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps) | |
[ 50.722934] wlan: [0:I:ANY] ol_ath_vap_set_param: 1812: Now supported CTRL RATE is:6000 kbps, rate code:0x10000003 | |
[ 50.728462] wlan: [0:I:ANY] ol_ath_vap_set_param: 1686: Now supported MCAST RATE 54000(kbps), rate code: 0x10000004 | |
[ 50.738657] wlan: [0:I:ANY] vdev[1]: Mgt Rate:6000(kbps) | |
[ 50.748915] wlan: [0:I:ANY] ol_ath_vap_set_param: 1812: Now supported CTRL RATE is:6000 kbps, rate code:0x10000003 | |
[ 50.754449] wlan: [0:I:ANY] ol_ath_vap_set_param: 1686: Now supported MCAST RATE 54000(kbps), rate code: 0x10000004 | |
[ 52.700525] sh (7881): drop_caches: 3 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment