Jalapeno-new

gistfile1.txt

BusyBox v1.27.2 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r6149-3e1cc5ae21
 -----------------------------------------------------
root@Jalapeno:~# uname -a
Linux Jalapeno 4.9.77 #0 SMP Wed Feb 14 14:12:43 2018 armv7l GNU/Linux
root@Jalapeno:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.77 (robimarko@localhost.localdomain) (gcc version 6.3.0 (OpenWrt GCC 6.3.0 r6148-5d3943bff3) ) #0 SMP Wed Feb 14 14:12:43 2018
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: 8devices Jalapeno
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 65024
[    0.000000] free_area_init_node: node 0, pgdat c07970c0, node_mem_map cfdf9000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] percpu: Embedded 13 pages/cpu @cfdaa000 s20940 r8192 d24116 u53248
[    0.000000] pcpu-alloc: s20940 r8192 d24116 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512
[    0.000000] Kernel command line: ubi.mtd=ubi rootfstype=squashfs
[    0.000000] Bootloader command line not present
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 251512K/260096K available (3838K kernel code, 246K rwdata, 1236K rodata, 240K init, 242K bss, 8584K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc05c7b48   (3839 kB)
[    0.000000]       .init : 0xc071e000 - 0xc075a000   ( 240 kB)
[    0.000000]       .data : 0xc075a000 - 0xc07979c0   ( 247 kB)
[    0.000000]        .bss : 0xc0799000 - 0xc07d5868   ( 243 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 48.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[    0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000021] Switching to timer-based delay loop, resolution 20ns
[    0.000396] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[    0.000413] pid_max: default: 32768 minimum: 301
[    0.000517] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000530] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001123] CPU: Testing write buffer coherency: ok
[    0.001441] Setting up static identity map for 0x80208280 - 0x802082d8
[    0.005404] Brought up 4 CPUs
[    0.005425] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.005433] CPU: All CPU(s) started in SVC mode.
[    0.017233] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.017432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017461] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.017625] pinctrl core: initialized pinctrl subsystem
[    0.018933] NET: Registered protocol family 16
[    0.019210] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.049984] cpuidle: using governor ladder
[    0.080010] cpuidle: using governor menu
[    0.120907] msm_bus_fabric_init_driver
[    0.121168] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.121184] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.121201] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
[    0.121242] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.121256] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.121270] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
[    0.180177] usbcore: registered new interface driver usbfs
[    0.180303] usbcore: registered new interface driver hub
[    0.180411] usbcore: registered new device driver usb
[    0.180471] pps_core: LinuxPPS API ver. 1 registered
[    0.180481] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.180510] PTP clock support registered
[    0.181796] clocksource: Switched to clocksource arch_sys_counter
[    0.182787] NET: Registered protocol family 2
[    0.183429] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.183477] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.183525] TCP: Hash tables configured (established 2048 bind 2048)
[    0.183585] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.183618] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.183813] NET: Registered protocol family 1
[    0.183854] PCI: CLS 0 bytes, default 64
[    0.185064] No memory allocated for crashlog
[    0.185296] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    0.191247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.191261] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.195800] io scheduler noop registered
[    0.195817] io scheduler deadline registered (default)
[    0.199844] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.199913] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.199965] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.200015] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.200170] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.200917] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.200973] msm_serial 78af000.serial: uartclk = 1843200
[    0.201017] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 125, base_baud = 115200) is a MSM
[    0.201043] msm_serial: console setup on port #0
[    0.734573] console [ttyMSM0] enabled
[    0.739601] msm_serial: driver initialized
[    0.750091] loop: module loaded
[    0.751188] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.752969] m25p80 spi0.0: found s25fl064k, expected mx25l1606e
[    0.764712] random: fast init done
[    0.771082] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.771145] 8 ofpart partitions found on MTD device spi0.0
[    0.774779] Creating 8 MTD partitions on "spi0.0":
[    0.780234] 0x000000000000-0x000000040000 : "SBL1"
[    0.786032] 0x000000040000-0x000000060000 : "MIBIB"
[    0.790699] 0x000000060000-0x0000000c0000 : "QSEE"
[    0.795553] 0x0000000c0000-0x0000000d0000 : "CDT"
[    0.800265] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
[    0.805104] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
[    0.810056] 0x0000000f0000-0x000000170000 : "APPSBL"
[    0.815354] 0x000000170000-0x000000180000 : "ART"
[    0.821585] libphy: ipq40xx_mdio: probed
[    0.858309] ESS reset ok!
[    0.891302] ESS reset ok!
[    1.322312] libphy: Fixed MDIO Bus: probed
[    1.322339] libphy: mdio_driver_register: qca8k
[    1.522518] i2c /dev entries driver
[    1.524408] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 666000 KHz
[    1.524881] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 716800 KHz
[    1.532669] sdhci: Secure Digital Host Controller Interface driver
[    1.540787] sdhci: Copyright(c) Pierre Ossman
[    1.547186] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.614348] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
[    1.614587] nand: Winbond W25N01GV 1G 3.3V 8-bit
[    1.620008] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.624922] Scanning device for bad blocks
[    2.195469] random: crng init done
[    2.247787] 1 ofpart partitions found on MTD device spi0.1
[    2.247818] Creating 1 MTD partitions on "spi0.1":
[    2.252207] 0x000000000000-0x000008000000 : "ubi"
[    2.260868] NET: Registered protocol family 10
[    2.263631] NET: Registered protocol family 17
[    2.266316] 8021q: 802.1Q VLAN Support v1.8
[    2.270569] Registering SWP/SWPB emulation handler
[    2.279922] ubi0: attaching mtd8
[   13.539136] ubi0: scanning is finished
[   13.667484] ubi0: attached mtd8 (name "ubi", size 128 MiB)
[   13.667557] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[   13.671974] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[   13.678766] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[   13.685661] ubi0: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0
[   13.692426] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[   13.698649] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1633511123
[   13.705801] ubi0: available PEBs: 0, total reserved PEBs: 1024, PEBs reserved for bad PEB handling: 20
[   13.715144] ubi0: background thread "ubi_bgt0d" started, PID 104
[   13.732960] block ubiblock0_1: created from ubi0:1(rootfs)
[   13.733030] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[   13.737388] hctosys: unable to open rtc device (rtc0)
[   13.776855] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[   13.779018] Freeing unused kernel memory: 240K
[   13.783096] This architecture does not have kernel memory protection.
[   15.421902] init: Console is alive
[   15.422175] init: - watchdog -
[   17.620889] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   17.922950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.934095] SCSI subsystem initialized
[   17.946572] libata version 3.00 loaded.
[   17.962388] ehci-platform: EHCI generic platform driver
[   17.972595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   17.974756] ohci-platform: OHCI generic platform driver
[   18.267372] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   18.267466] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   18.272129] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x02010010
[   18.279400] xhci-hcd xhci-hcd.0.auto: irq 192, io mem 0x08a00000
[   18.297825] hub 1-0:1.0: USB hub found
[   18.298594] hub 1-0:1.0: 1 port detected
[   18.305260] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   18.305695] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   18.311427] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   18.327247] hub 2-0:1.0: USB hub found
[   18.328058] hub 2-0:1.0: 1 port detected
[   18.335336] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   18.335950] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   18.341851] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x02010010
[   18.348166] xhci-hcd xhci-hcd.1.auto: irq 193, io mem 0x06000000
[   18.366469] hub 3-0:1.0: USB hub found
[   18.367224] hub 3-0:1.0: 1 port detected
[   18.373607] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   18.374040] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   18.380073] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   18.395585] hub 4-0:1.0: USB hub found
[   18.396331] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[   18.414442] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   18.424159] init: - preinit -
[   20.437606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.438887] ess_edma c080000.edma: eth0: GMAC Link is up with phy_speed=1000
[   20.442414] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.022166] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 178
[   25.298889] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[   25.298980] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   25.305840] UBIFS (ubi0:2): FS size: 119738368 bytes (114 MiB, 943 LEBs), journal size 5967872 bytes (5 MiB, 47 LEBs)
[   25.315691] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
[   25.326280] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID A2B619D2-E8F6-43CC-AD03-A88295A4C6A0, small LPT model
[   25.345572] mount_root: overlay filesystem has not been fully initialized yet
[   25.347806] mount_root: switching to ubifs overlay
[   25.916788] urandom-seed: Seed file not found (/etc/urandom.seed)
[   26.193582] procd: - early -
[   26.193710] procd: - watchdog -
[   26.843106] procd: - watchdog -
[   26.845808] procd: - ubus -
[   27.883051] procd: - init -
[   28.347715] kmodloader: loading kernel modules from /etc/modules.d/*
[   28.352366] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   28.362266] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   28.362310] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   28.371237] ip_tables: (C) 2000-2006 Netfilter Core Team
[   28.382621] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   28.416983] xt_time: kernel timezone is -0000
[   28.450183] PPP generic driver version 2.4.2
[   28.451545] NET: Registered protocol family 24
[   28.643726] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
[   28.643778] ath10k_ahb a000000.wifi: Falling back to user helper
[   30.177973] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[   30.178026] ath10k_ahb a000000.wifi: Falling back to user helper
[   30.247287] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[   31.139080] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   31.139138] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   31.154999] ath10k_ahb a000000.wifi: firmware ver 10.4-3.4-00104 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 6c332c67
[   31.199303] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 ca45b5a2
[   32.543761] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   32.558530] ath: EEPROM regdomain: 0x0
[   32.558538] ath: EEPROM indicates default country code should be used
[   32.558542] ath: doing EEPROM country->regdmn map search
[   32.558549] ath: country maps to regdmn code: 0x3a
[   32.558554] ath: Country alpha2 being used: US
[   32.558557] ath: Regpair used: 0x3a
[   32.743753] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a800000.wifi.bin failed with error -2
[   32.743808] ath10k_ahb a800000.wifi: Falling back to user helper
[   34.248412] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[   34.248467] ath10k_ahb a800000.wifi: Falling back to user helper
[   34.317766] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[   34.318086] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   34.325720] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   34.342993] ath10k_ahb a800000.wifi: firmware ver 10.4-3.4-00104 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 6c332c67
[   34.388556] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 ca45b5a2
[   35.734464] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   35.748233] ath: EEPROM regdomain: 0x0
[   35.748242] ath: EEPROM indicates default country code should be used
[   35.748246] ath: doing EEPROM country->regdmn map search
[   35.748253] ath: country maps to regdmn code: 0x3a
[   35.748257] ath: Country alpha2 being used: US
[   35.748261] ath: Regpair used: 0x3a
[   35.754465] kmodloader: done loading kernel modules from /etc/modules.d/*
[   40.299691] ess_edma c080000.edma: eth0: GMAC Link is up with phy_speed=1000
[   40.301401] br-lan: port 1(eth0) entered blocking state
[   40.305914] br-lan: port 1(eth0) entered disabled state
[   40.311196] device eth0 entered promiscuous mode
[   40.322968] br-lan: port 1(eth0) entered blocking state
[   40.323017] br-lan: port 1(eth0) entered forwarding state
[   40.327247] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   40.352594] br-lan: port 2(eth1) entered blocking state
[   40.352642] br-lan: port 2(eth1) entered disabled state
[   40.357332] device eth1 entered promiscuous mode
[   41.274938] ath: EEPROM regdomain: 0x80bf
[   41.275004] ath: EEPROM indicates we should expect a country code
[   41.277984] ath: doing EEPROM country->regdmn map search
[   41.284188] ath: country maps to regdmn code: 0x37
[   41.289442] ath: Country alpha2 being used: HR
[   41.294150] ath: Regpair used: 0x37
[   41.298500] ath: regdomain 0x80bf dynamically updated by user
[   41.302012] ath: EEPROM regdomain: 0x80bf
[   41.307737] ath: EEPROM indicates we should expect a country code
[   41.311734] ath: doing EEPROM country->regdmn map search
[   41.317858] ath: country maps to regdmn code: 0x37
[   41.323234] ath: Country alpha2 being used: HR
[   41.327787] ath: Regpair used: 0x37
[   41.332262] ath: regdomain 0x80bf dynamically updated by user
[   41.362895] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   44.904099] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   46.491252] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   46.491742] br-lan: port 3(wlan0) entered blocking state
[   46.496030] br-lan: port 3(wlan0) entered disabled state
[   46.501992] device wlan0 entered promiscuous mode
[   46.510398] br-lan: port 4(wlan1) entered blocking state
[   46.511439] br-lan: port 4(wlan1) entered disabled state
[   46.517311] device wlan1 entered promiscuous mode
[   47.484825] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   47.485073] br-lan: port 4(wlan1) entered blocking state
[   47.490273] br-lan: port 4(wlan1) entered forwarding state
[   49.030018] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.030249] br-lan: port 3(wlan0) entered blocking state
[   49.035484] br-lan: port 3(wlan0) entered forwarding state