Created
September 27, 2017 15:55
-
-
Save robimarko/97b4777addab110ba0a68fe373efa6be to your computer and use it in GitHub Desktop.
DLB Propeller 5 LEDE bootlog
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
## Booting image at 9f040000 ... | |
Image Name: APCPE.QM-1.v7.99.0000 | |
Created: 2017-09-27 10:23:43 UTC | |
Image Type: MIPS Linux Kernel Image (lzma compressed) | |
Data Size: 1320314 Bytes = 1.3 MB | |
Load Address: 80060000 | |
Entry Point: 80060000 | |
Verifying Checksum at 0x9f040040 ...OK | |
Uncompressing Kernel Image ... OK | |
Starting kernel ... | |
[ 0.000000] Linux version 4.4.88 (robimarko@Builder-temp) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4945-5cd0763) ) #0 Wed Sep 27 10:23:43 2017 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) | |
[ 0.000000] SoC: Atheros AR9342 rev 2 | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 04000000 @ 00000000 (usable) | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] No valid device tree found, continuing without | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] | |
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 | |
[ 0.000000] Kernel command line: board=DLB-5 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env),1152k(kernel1),6528k(rootfs1),1152k(kernel2),6528k(rootfs2),576k(data)ro,128k(cfg)ro,64k(art)ro,7680k@0x40000(firmware1),7680k@0x7C0000(firmware2),16384k@0x0(flash) console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd | |
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) | |
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Writing ErrCtl register=00000000 | |
[ 0.000000] Readback ErrCtl register=00000000 | |
[ 0.000000] Memory: 60100K/65536K available (2996K kernel code, 144K rwdata, 756K rodata, 320K init, 200K bss, 5436K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] NR_IRQS:51 | |
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz | |
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns | |
[ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns | |
[ 0.008302] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688) | |
[ 0.081136] pid_max: default: 32768 minimum: 301 | |
[ 0.086184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.093238] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.103547] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.114065] futex hash table entries: 256 (order: -1, 3072 bytes) | |
[ 0.121317] NET: Registered protocol family 16 | |
[ 0.127658] MIPS: machine is LigoWawe DLB-5 | |
[ 0.356913] clocksource: Switched to clocksource MIPS | |
[ 0.363697] NET: Registered protocol family 2 | |
[ 0.369205] TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.376636] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | |
[ 0.383460] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 0.390329] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.396560] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.403570] NET: Registered protocol family 1 | |
[ 0.412956] Crashlog allocated RAM at address 0x3f00000 | |
[ 0.433774] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.440051] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 0.453290] io scheduler noop registered | |
[ 0.457531] io scheduler deadline registered (default) | |
[ 0.463296] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled | |
[ 0.470584] console [ttyS0] disabled | |
[ 0.494471] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A | |
[ 0.503672] console [ttyS0] enabled | |
[ 0.503672] console [ttyS0] enabled | |
[ 0.511098] bootconsole [early0] disabled | |
[ 0.511098] bootconsole [early0] disabled | |
[ 0.523096] m25p80 spi0.0: found w25q128, expected m25p80 | |
[ 0.528650] m25p80 spi0.0: w25q128 (16384 Kbytes) | |
[ 0.533467] 12 cmdlinepart partitions found on MTD device spi0.0 | |
[ 0.539579] Creating 12 MTD partitions on "spi0.0": | |
[ 0.544542] 0x000000000000-0x000000030000 : "u-boot" | |
[ 0.552118] 0x000000030000-0x000000040000 : "u-boot-env" | |
[ 0.559337] 0x000000040000-0x000000160000 : "kernel1" | |
[ 0.566203] 0x000000160000-0x0000007c0000 : "rootfs1" | |
[ 0.573138] 0x0000007c0000-0x0000008e0000 : "kernel2" | |
[ 0.580080] 0x0000008e0000-0x000000f40000 : "rootfs2" | |
[ 0.587024] 0x000000f40000-0x000000fd0000 : "data" | |
[ 0.593631] 0x000000fd0000-0x000000ff0000 : "cfg" | |
[ 0.600211] 0x000000ff0000-0x000001000000 : "art" | |
[ 0.606763] 0x000000040000-0x0000007c0000 : "firmware1" | |
[ 0.613911] 0x0000007c0000-0x000000f40000 : "firmware2" | |
[ 0.621029] 0x000000000000-0x000001000000 : "flash" | |
[ 0.646015] libphy: ag71xx_mdio: probed | |
[ 0.655087] libphy: ag71xx_mdio: probed | |
[ 1.327190] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd023, driver=Atheros 8032 ethernet] | |
[ 1.338059] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII | |
[ 1.346598] NET: Registered protocol family 10 | |
[ 1.355340] NET: Registered protocol family 17 | |
[ 1.360008] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
[ 1.372965] 8021q: 802.1Q VLAN Support v1.8 | |
[ 1.380231] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 | |
[ 1.387882] Please append a correct "root=" boot option; here are the available partitions: | |
[ 1.396359] 1f00 192 mtdblock0 (driver?) | |
[ 1.401511] 1f01 64 mtdblock1 (driver?) | |
[ 1.406648] 1f02 1152 mtdblock2 (driver?) | |
[ 1.411789] 1f03 6528 mtdblock3 (driver?) | |
[ 1.416938] 1f04 1152 mtdblock4 (driver?) | |
[ 1.422074] 1f05 6528 mtdblock5 (driver?) | |
[ 1.427216] 1f06 576 mtdblock6 (driver?) | |
[ 1.432353] 1f07 128 mtdblock7 (driver?) | |
[ 1.437495] 1f08 64 mtdblock8 (driver?) | |
[ 1.442630] 1f09 7680 mtdblock9 (driver?) | |
[ 1.447773] 1f0a 7680 mtdblock10 (driver?) | |
[ 1.452997] 1f0b 16384 mtdblock11 (driver?) | |
[ 1.458223] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) | |
[ 1.467421] Rebooting in 1 seconds.. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment